Solicitation 119010 FBO solicitation .doc

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

Offeror to complete blocks 12, 17, 23, 24, & 30

6. SOLICITATION ISSUE DATE

INFORMATION CALL:

DESTINATION UNLESS

12. DISCOUNT TERMS

UNRESTRICTED (all nsns)

BLOCK IS MARKED

XSEE SCHEDULE

13a. THIS CONTRACT IS A RATED ORDER

FORMCHECKBOX

SMALL BUSINESS,

UNDER DPAS (15 CFR 700)

HUBZONE SM. BUSINESS BUSINSESS

13b. RATING

8(A)

FORMCHECKBOX

IFB

FORMCHECKBOX

RFP

230 SOUTH DEARBORN STREET-M/S 34-3

CHICAGO, IL 60604

17a. CONTRACTOR/OFFEROR

OFFEROR

CODE

FACILITY CODE

GSA Accounts Payable Branch

PO Box 419018

Kansas City, MO 64131

FORMCHECKBOX

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

FORMCHECKBOX

SEE ADDENDUM

Blanket Purchase Agreement for : FSC 8030

Commodity: 8030- Sealing Compounds

Period: 8/1/2011 or Date of Award to 7/31/2016

Shlivery Days officINFORMATION ial Itemse for any of the subject contractors. ionke precedence over the Schedules Minimum Ordeipment must be within: 30 Days or Less ARO

See Attached Quote Sheet

(Attach Additional Sheet as Necessary)

X27a. solicitation incorporates by reference FAR 52.212-1, 52.212-4. FAR 52.212-3 and 52.212-5 are attached.

Addenda Xare FORMCHECKBOX are not attached.

FORMCHECKBOX

27b. contract/purchase order incorporates by reference FAR 52.212-4. FAR 52.212-5 is attached.

Addenda FORMCHECKBOX are FORMCHECKBOX are not attached.

28.

X

FORMCHECKBOX

AWARD OF CONTRACT: REFERENCE OFFER DATED . YOUR OFFER ON SOLICITATION (BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

Renee M. Roe

Kathy L. Vannatta

AUTHORIZED FOR LOCAL REPRODUCTION

STANDARD FORM 1449 (REV. 3/2005)

Previous Edition Is Not Usable Prescribed by GSA ( FAR (48 CFR) 53.212

Attachment 1 for Form 1449

1. This Blanket Purchase Agreement is issued to establish agreements for ordering, shipping, and billing to cover merchandise purchased. The essence of this agreement is that a contractor will be awarded a Blanket Purchase Agreement for providing specified FSC 8030 Sealing Compounds to satisfy requirements for a specified period of time (five years) to be shipped to any destination within the 48 continuous states and District of Columbia.

2. Resultant awards will be based on a best value determination. Consideration could be given to vendor performance history, delivery time, minimum order limit, and/or price. NOTE AWARD WILL NOT BE EFFECTIVE UNTIL 8/1/2011. QUOTES ARE TO BE VALID UNTIL AWARD.

3. This agreement does not obligate the Government to order or the vendor to furnish any articles on any quantity except to the extent that may be agreed upon in connection with individual transactions. In the event that this agreement is applied in connection with ordering material available under Federal Supply Schedules contracts, or other established contracts, nothing herein shall be deemed to modify the terms and conditions of such contracts.

MULTIPLE AWARD SCHEDULE VENDORS: Please indicate which items you quote on fall under your Multiple Award Schedule (MAS) Contract and the contract number.

4. This agreement is made in accordance with negotiation authority of Federal Acquisition Regulation l3.303-Blanket Purchase Agreements.

5. PRICING: The prices to the Government shall be as low or lower than those charged to the supplier’s most favored customer for comparable quantities under similar terms and conditions in addition to any discounts for prompt payment. ALL prices requested FOB Origin-Prepay and Add (see clause 52.247-32).

6. The minimum purchase order dollar amount for items awarded under this agreement is $1.00. Please indicate if you have an alternate minimum purchase order limit for any item.

7. The maximum single order limitation for all items is $150,000. No items are being set aside for small business concerns.

8. Price increases: In the event of a price increase, the prices herein quoted will remain in effect for a reasonable period (30 days) from the date of the vendor’s written notice of such increases to allow the Government sufficient time to update pricing. Any price increase request must be supported by sufficient documentation to justify the price increase. The documentation must be submitted with the price increase request. Price increase requests may be submitted once annually PER BPA AGREEMENT starting after the first 12 month period of the agreement.

NOTE: All purchase orders issued during the 30-day period at the old prices are to be accepted and processed. No price changes to purchase orders issued before or during this timeframe will be allowed. Where the Government fails to make the necessary computer changes within the 30-day period, purchase orders will be amended to reflect the approved increased price.

9. Shipment Days shall be: 30 Days ARO or less, please indicate your shipment time, if less than 45 days: __________.

10. Inspection & Acceptance Inspection and acceptance shall be at destination for all items.

a. All purchase orders, which may be issued under the Blanket Purchase Agreement for direct delivery to the GSA customer, will be subject to and include the attached terms and conditions.

b. Supplies shall be FOB origin, shipped prepaid by common carrier, parcel carrier or parcel post (unless other specified on individual purchase orders)

11. OPTION TO EXTEND THE TERM OF THE AGREEMENT: The term of this agreement may be extended by mutual consent of the parties, provided:

a. Vendors will be contacted within thirty (30) days of expiration of the current agreement if the government intends to extend the BPA (this notice shall not be deemed to commit the Government to an extension).

b. The extension shall be a period of no more than 60 days.

12. By signing below you are certifying that the products meet the salient characteristics of the Item Purchase Description (IPD), and are American made. Failure to meet these requirements may result in your bearing the costs of:

a. Replacing items

b. Shipment to replace

c. Government re-procurement Contractor’s Name and Signature

Date

13. If items are not made in America please indicate the country of origin with your quote.

14. BPA may be cancelled for cause immediately, by the government, if contractor is noncompliant with terms and conditions of agreement.

15. Agreement may be cancelled by either party at no cost with 30 day written notice.

16. Vendor’s personnel to contact:

COMPANY NAME: ______________________________________

POINT OF CONTACT:_______________________________ E-MAIL:________________

CO. DUNS #: ____________________ TIN: ______________________

ADDRESS: ______________________________________________

CITY: ______________________ STATE: ____ ZIP CODE: ________

TELEPHONE: _________________ FAX: ______________________

17. NOTICE OF INDIVIDUAL AUTHORIZED TO PURCHASE UNDER THE BPA:

Contract Specialists and Purchasing Agents located at:

GSA, FAS, Heartland Supply Operations Center (QSDKAB) 1500 East Bannister Road Kansas City, MO 64131-3088.

18. If you quote on and subsequently receive an award on a Qualified Products Item(s) (items 1, 2, 15, 16 and 18), you must either (1) be listed on the QPL/QPD, or (2) provide a letter from the manufacturer listed on the QPL/QPD, for the product(s) you are proposing to provide, stating they will sell you the QPL/QPD product for resale to the GSA. This letter must be received at the time the quote is submitted. Failure to provide the letter at the time the quote is submitted will preclude you from receiving an award.

19. Price Break quantities will be solicited on all National Stock Numbers in order to provide coverage for the lower quantity items. The availability of low quantity items is essential for our customers to achieve their mission.

Clause 6FEP-M-FSS-301-F, Method of Award (05/02) is incorporated to cover price break quantity awards. Awards will be made in the aggregate for the quantity breakdown shown for each item. The low aggregate offeror will be determined by the averaged unit price. In order to qualify for an award on an item, prices must be submitted on each quantity breakdown shown for the item.

20. Please submit entire package when submitting quotes.

21. Most unclassified Defense specifications and standards may be downloaded from the following Assist websites:

· ASSIST (http://assist.daps.dla.mil)

· Quick Search (http://assist.daps.dla.mil/quicksearch)

· ASSISTdocs.com (http://assistdocs.com)

Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by-

· Using the ASSIST shopping Wizard (http://assist.daps.dla.mil/wizard);

· Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

· Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.

22. This is a Request for Quotation, on a Blanket Purchase Agreement for FSC 8030. This Blanket Purchase Agreement will be for FIVE (5) years beginning on 8/01/2011, or date of award, through 7/31/2016.

END BOILER PLATE

PLACE QUOTES HERE

NOTE: AWARD IS IN THE AGGREGATE – PLEASE QUOTE ALL QUANTITIES OR INDICATE IF PRICE IS THE SAME FOR ALL QUANTITIES Schedule of Items

QSDM-J9-119010-I

FOR BRAND NAME ITEMS PLEASE INDICATE THE BRAND NAME ITEM YOU ARE QUOTING

Item

Unit of Est. 5-Yr Price Break

FOB DEST

Min Order Number NSN Issue Quantity Quantity Price

1.

8030-00-142-9124

KT

2-9

10+

2.

8030-00-142-9133

KT

3.

8030-00-241-2498

KT

4.

8030-00-555-2878

GL

Brand Name or Equal Item:

Or Equal: ___________________________ (see Provision 52.211-6) 5.

8030-00-830-1821

BX

Brand Name or Equal Item:

Or Equal: ___________________________ (see Provision 52.211-6) 6.

8030-00-849-0071

TU

7.

8030-00-933-7084

BX

8.

8030-01-008-0836

KT

9.

8030-01-097-9102

KT

10.

8030-01-152-0969

TU

11.

8030-01-208-9494

LB

12.

8030-01-265-2895

BX

13.

8030-01-289-4502

CN

14.

8030-01-347-0964

CA

17566

15.

8030-01-364-3883

CA

16.

8030-01-364-7366

KT

17.

8030-01-376-7248

KT

Brand Name or Equal Item:

Or Equal: ___________________________ (see Provision 52.211-6) 18.

8030-01-395-2728

KT

19.

8030-01-470-7364

CA

20.

8030-01-519-8280

KT

21.

8030-01-519-8281

KT

22.

8030-99-220-2431

BX

NOTE: VENDOR MUST MEET ALL OF THE REQUIREMENTS OF THE IPD IN ORDER TO PLACE A QUOTE. THERE ARE SPECIAL MARKING, PACKAGING AND SHELF LIFE REQUIREMENT-PLEASE READ THE REQUIREMENTS AND ENSURE YOU CAN MEET THE ITEM PURCHASE DESCRIPTION 100%. IT IS EXTREMELY IMPORTANT THAT YOU COMPLY WITH MILITARY STANDNARD 129.

End of Schedule Items

ITEM PURCHASE DESCRIPTION QSDM-J9-119010-I

1. 8030-00-142-9124 UI: KT

SEALING COMPOUND:

DESCRIPTION

Type II: intermediate viscosity

Class 2: medium cure, room temperature

Grade B2: reversion resistant, addition cure

Size: A kit consisting of a minimum of 3/4 pint of base material in a can, the required amount of separately packaged curing agent, and 4 fl oz of separately packaged primer if required to qualify sealant to the specification.

Shelf life code: 4 (12 months)

Maximum age on delivery: The product shall have a minimum of 6 months usable shelf life remaining upon delivery to the government.

See Technical Specifications paragraph(s): T1.4, T2.2, T3.3, T4.5, T5.6 and T6.1.

2. 8030-00-142-9133 UI: KT

SEALING COMPOUND:

DESCRIPTION

Type I: low viscosity

Class 2: medium cure, room temperature

Grade A: condensation cure

Size: A kit consisting of a minimum of 3/4 pint of base material in a can, the required amount of separately packaged curing agent, and 4 fl oz of separately packaged primer if required to qualify sealant to the specification.

Shelf life code: 2 (6 months)

Maximum age on delivery: 1 month

See Technical Specifications paragraph(s): T1.4, T2.2, T3.3, T4.4, T5.6 and T6.1.

3. 8030-00-241-2498 UI: KT

SEALING COMPOUND:

DESCRIPTION

Size: a two-part kit consisting of 1 quart of base and the required amount of curing agent in separate containers.

Shelf life code: 2 (6 months)

Maximum age on delivery: 1 month.

See Technical Specifications paragraph(s): T1.3, T2.1, T3.2, T4.4, T5.3 and T6.1.

4. 8030-00-555-2878 UI: GL

SEALING COMPOUND:

DESCRIPTION

A clear, low VOC (less than 400 g/L), resin based solution of organic and inorganic solids carried in an aqueous solvent system. Does not contain silicones, mercury, or lead. The compound shall be suitable for use in sealing/waterproofing concrete, masonry, brick, stucco, mortar joints, limestone, wood, drywall, and other porous materials.

Size: one gallon packaged in a container.

Shelf life code: 4 (12 months)

Maximum age on delivery: 2 months

Sherwin-Williams Co., Thompson's Advanced Multi-Surface Waterproofer part number 11701, Behr Process Corp., No. 2-85 Multi-Purpose Waterproofing Sealer or equal.

Offering on:

Manufacturer's Name: __________________________

Brand___________________________________

Model or Part No. __________________________________

See Technical Specifications paragraph(s): TB.1, T3.7, T4.2, T5.3 and T6.1.

5. 8030-00-830-1821 UI: BX

SEALING COMPOUND:

DESCRIPTION

A gray, two-part, aluminum-filled, epoxy paste that can be used as an adhesive or sealing and filling cracks, dents, or other uses. The product shall also be machinable and moldable.

Size: a kit consisting of one quart base resin and one quart of hardener for a total of two quarts mixed volume. Six quarts of base resin shall be packaged in one box along with six quarts of hardener in a separate box in accordance with the supplier's normal commercial practice as a unit of issue.

Shelf life code: 4 (12 months)

Maximum age on delivery: 2 months

Huntsman Advanced Materials, Inc., part number RP 1250 Resin and RP 1250 Hardener or equal.

Offering on:

Manufacturer's Name: __________________________

Brand___________________________________

Model or Part No. __________________________________

See Technical Specifications paragraph(s): TB.1, T3.2, T4.3, T5.3 and T6.1.

6. 8030-00-849-0071 UI: TU

SEALING COMPOUND:

DESCRIPTION

Type II: non-hardening

Size: 1.5 wt oz in a tube

Shelf life code: 7 (3 years)

Maximum age on delivery: 6 months

See Technical Specifications paragraph(s): T1.6, T3.6, T4.8, T5.5 and T6.1.

7. 8030-00-933-7084 UI: BX

SEALING COMPOUND:

DESCRIPTION

A general purpose, non-curing, putty-type material for vibration damping or sealing of forced air ducting, cabling, or piping penetration spools against leakage of air, moisture, dust, and noise. The product shall meet the requirements as listed below.

1. Contents: The sealing compound shall not contain any form of asbestos as an added product ingredient. Incidental background asbestos shall be less than 1% by the "point counting" method described in the following test method.

TEST METHOD: Positive asbestos fiber identification and quantitation shall be in accordance with optical methods per para. 1.7.2.2 and 1.7.2.3, respectively, of the National Institute for Occupational Safety and Health (NIOSH) and U. S. Environmental Protection Agency test method described in Code of Federal Regulations (CFR) 40, Chapter 1, (1-1-87 edition), Part 763, Subpart F, Appendix A and pages 293-299 or later edition, if issued. Sample preparation and analysis interference shall be in accordance with practices described in paragraph 1.7.2.2. Note: keep muffle furnace temperature at 500 degrees C or lower to prevent changes to the refractive index(s).

2. * ADHESION TO SHEET METAL: The sealant shall show no more than 10% adhesion failure when sheet metal sandwiches of sealant are pulled apart in accordance with the following procedure. Cut six flat 3" x 3" aluminum and hot-galvanized sheet metal specimens from any thickness gauge sheets which are normally used to form HVAC ductwork. Degrease both surfaces of each sheet metal specimen and allow to dry. Prepare three each sandwiches of aluminum and galvanized sheet metal. Place sufficient sealing compound between the sheet metal coupons to yield between a 1/8 inch and 1/4 inch thick compression of sealant when the lamination is pressed between two pressure platens of choice to the tester. Bench-top age all specimens overnight between 65-75 degrees F. Hold all test specimens @ 73 +/- 2 degrees F for a minimum of 2 hours before testing. By hand, separate the sheet metal coupons from the sealant by peeling action from any corner. No specimens shall show more than 10% adhesion failure (bare metal) based on a total of 18 square inches of total face-to-face sheet metal contact area or the sealant fails. When visual estimation of the surface area failure is questionable, the tester shall use a calibrated planimeter.

3. NON-CURING: The sealing compound shall be non-curing.

TEST METHOD: Prepare a test specimen of sealing compound 3" x 3" x 1/8" (in.) thick on a sheet of glass. Place the prepared specimen flat in a forced-draft oven @ 180 degrees F for 24 hours. Remove and cool to ambient room temperature. The surface and thickness of subject sample shall exhibit a molding clay plasticity, with no surface crusting, crumbling, or cracking when a pencil point is drawn firmly across the specimen surface.

4. * WORKABILITY: The sealing compound shall have a consistency for working by a spatula or putty knife tools.

TEST METHOD: Against any 90 degree angle shape, lay a convex fillet of sealing compound, 1/2" (radius) x 6" (long). If the sealing compound lacks this workability, it does not comply and fails.

5. NON-ODOROUS: A panel of three individuals shall judge that no objectionable odor generates from the sealing compound.

TEST METHOD: Prepare a 3 inch diameter by 1/4 inch thick portion of sealing compound on a flat glass sheet. Age the prepared specimen horizontally in a convection oven for 12 hours at 110 +/ 2 degrees F. A panel of three individuals (from outside the laboratory area) shall sniff above the exhaust port of the oven and shall individually report no discernible odor (either pleasant or unpleasant). If the teat fails, select another panel of individuals and repeat the test. If the test fails a second time, the sample fails and does not comply.

6. FREEZE STABILITY: Material shall show no visible signs of vehicle separation during three (3) freeze-thaw cycles.

TEST METHOD: A 250 milliliter sample of sealing compound in a pyrex beaker shall be exposed (undisturbed) to three (3) full freeze-thaw cycles as follows: 24 hours @ zero (0) degree F followed by 24 hours at 110 degrees F. Using a 7X power hand lens, no discernible separation of vehicle and filler materials shall be evident through the beaker sidewalls or on the surface of the test specimen. If a second sample fails (if required), the sealing compound does not comply.

7. * WATER RESISTANCE: The maximum water absorption shall be less than 0.75% when three samples are tested in accordance with ASTM C-1016-84 (or later revision) titled "Determination of Water Absorption by Sealant Backup (Joint-Filler) Materials".

8. PAINTABILITY: The sealing compound shall be paintable with either solvent-based or water-based paints.

TEST METHOD: Prepare two 6" x 6" x 1/8" (in.) specimens of sealing compound on a glass plate; smooth the surface by drawing an edge across the surface. Without conditioning, brush on one surface an interior grade acrylic latex paint; brush the remaining specimen with an interior grade oil (solvent type) base paint. No "fisheye" effects shall be discernible on the painted surface after one hour above 60 degrees F.

QUALITY ASSURANCE: The contractor is responsible for full compliance to the above requirements and tests. Raw test data and final test reports shall be available for Government inspection. The Government inspector shall randomly select one unit of issue for Government testing for every 200 units offered the Government.

* An "asterisk" marks those minimum requirements and tests that shall be performed by the designated quality assurance laboratory. The Government may elect to perform every requirement and test for this sealing compound.

Size: Fifty 1 lb bags in a box

Shelf life code: 9 (5 years)

Maximum age on delivery: 6 months

See Technical Specifications paragraph(s): T3.6, T4.1, T5.3 and T6.1.

8. 8030-01-008-0836 UI: KT

SEALING COMPOUND:

DESCRIPTION

A two component, epoxy based, sealing and coating compound used for coating lagging and insulation on pipes, boilers, valves, and steam and exhaust lines.

Size: a 2 gallon kit consisting of separately packaged resin and hardener.

Shelf life code: 6 (2 years)

Maximum age on delivery: 4 months

ITW/Philadelphia Resins part number Phillyclad 5066A.

See Technical Specifications paragraph(s): T3.2, T4.4, T5.3 and T6.1.

9. 8030-01-097-9102 UI: KT

SEALING COMPOUND:

DESCRIPTION

A two-component, translucent amber, urethane casting compound for use in electrical and electronic applications where reversion resistance to high temperatures and humidity is required.

Size: a quart kit consisting of 140 grams part A and 700 grams part B packaged in separate containers.

Shelf life code: 2 (6 months)

Maximum age on delivery: 1 month

Huntsman Advanced Materials part number Uralane 5753 A/B(LV).

See Technical Specifications paragraph(s): T3.2, T4.3, T5.3 and T6.1.

10. 8030-01-152-0969 UI: TU

SEALING COMPOUND:

DESCRIPTION

A non-hardening, gel consistency, blue, polyester resin-based sealing compound for use as a metal to metal jointing material on Pratt & Whitney jet engines.

Grade: medium

Size: 3.5 fl oz packaged in tubes

Shelf life code: 6 (2 years)

Maximum age on delivery: 4 months

Hylomar Limited, part number Hylomar Aero-Grade PL-32M.

See Technical Specifications paragraph(s): T3.8, T4.2, T5.5 and T6.1.

11. 8030-01-208-9494 UI: LB

SEALING COMPOUND

DESCRIPTION

A 1-part, RTV silicone resin system having a silver-plated, copper filler and a non-corrosive cure system for use in environmental sealing and EMI/EMP shielding.

Size: a 1.00 pound cartridge and 1.5 fl oz primer in a separate container

Shelf life code: 2 (6 months)

Maximum age on delivery: 1 month

Chomerics/Parker Hannifin Corp., product Cho-Bond 1038, part number 50-01-1038-0000.

See Technical Specifications paragraph(s): T3.2, T4.3, T5.3 and T6.1.

12. 8030-01-265-2895 UI: BX

SEALING COMPOUND:

DESCRIPTION

A putty consistency, epoxy-based sealing compound for use in sealing leaks on aircraft fuel tanks.

Size: Thirty epoxy tabs in a box.

Shelf life code: 6 (2 years)

Maximum age on delivery: 4 months

La-Co Industries Inc. part number Epoxy Tabs Type O.

See Technical Specifications paragraph(s): T3.6, T4.2, T5.6 and T6.1.

13. 8030-01-289-4502 UI: CN

SEALING COMPOUND:

DESCRIPTION

An ethylene glycol-based solution for use on the inner surface of tires to seal air leaks and provide protection from blowouts and air loss from punctures.

Size: 5 gallons in a 5 gallon shipping pail.

Shelf life code: 9 (5 years)

Maximum age on delivery: 6 months

Ultraseal International, Inc. part number 4150.

See Technical Specifications paragraph(s): T3.8, T4.2 and T6.1.

14. 8030-01-347-0964 UI: CA

SEALING COMPOUND:

DESCRIPTION

A 1-part, neoprene-based, adhesive-sealant for use in bonding and sealing metals, wood, glass, masonry, and fiberglass.

Color: gray

Size: 11 oz cartridges

Shelf life code: 2 (6 months)

Maximum age on delivery: 1 month

Royal Adhesive and Sealant Co. part number M6325.

See Technical Specifications paragraph(s): T3.7, T4.2, T5.1 and T6.1.

15. 8030-01-364-3883 UI: CA

SEALING COMPOUND:

DESCRIPTION

Type 2: no adhesion promoter required for proper adhesion

Class B-1/4: for application by extrusion gun or spatula, 1/4 hr application time

Size: a minimum of 2.0 fl oz separate base compound and curing agent in a sectionalized 2.5 oz extrusion cartridge.

Shelf life code: 3 (9 months)

Maximum age on delivery: 2 months

See Technical Specifications paragraph(s): T1.2, T3.1, T4.7, T5.2 and T6.1.

16. 8030-01-364-7366 UI: KT

SEALING COMPOUND:

DESCRIPTION

Class B-2: for application by extrusion gun, spatula, brush, or roller; 2 hour application time.

Size: a quart kit consisting of a minimum of 24.0 fl oz of base compound and required amount of curing agent in separate containers.

Shelf life code: 3 (9 months)

Maximum age on delivery: 2 months

See Technical Specifications paragraph(s): T1.1, T3.1, T4.6, T5.3 and T6.1.

17. 8030-01-376-7248 UI: KT

SEALING COMPOUND:

DESCRIPTION

A 2-part, polyurethane system for use in repairing and sealing cracks and spalls in concrete and for anchoring bolts in concrete runways.

Size: a 10 gallon total mixed volume kit.

Shelf life code: 4 (12 months)

Maximum age on delivery: 2 months

M.M.A. Products/Ure-Fast Industries part number R-60, Percol Polymerics part number R-256 Concrete Welder or equal.

Offering on:

Manufacturer's Name: __________________________

Brand___________________________________

Model or Part No. __________________________________

See Technical Specifications paragraph(s): TB.1, T3.2, T4.3, T5.4 and T6.1.

18. 8030-01-395-2728 UI: KT

SEALING COMPOUND:

DESCRIPTION

Type IV-24: for faying surface application, gun or spatula; 24 hour application time

Class 1: polysulfide rubber base material

Grade A: contains chromate corrosion inhibitors

Size: pint kits consisting of a minimum of 12 fl oz base and required amount of curing agent in separate containers.

Shelf life code: 3 (9 months)

Maximum age on delivery: 2 months

See Technical Specifications paragraph(s): T1.5, T3.4, T4.4, T5.6 and T6.1.

19. 8030-01-470-7364 UI: CA

SEALING COMPOUND:

DESCRIPTION

A lightweight, rapid curing polythioether, aerodynamic smoothing sealant that is low sag, non-crazing, and suitable for extrusion gun or spatula application.

Work life: 1/2 hour

Size: a minimum of 3.5 oz in a 6 oz sectionalized, extrusion cartridge.

Shelf life code: 3 (9 months)

Maximum age on delivery: 2 months

PRC-DeSoto International Inc. part number PR-1824 B-1/2.

See Technical Specifications paragraph(s): T3.5, T4.7, T5.2 and T6.1.

20. 8030-01-519-8280 UI: KT

SEALING COMPOUND

DESCRIPTION

A 2-part, polyurethane compound for patching and repairing various types of metals.

Size: 125 gram kit consisting of separate base resin and curing agent in bipaks.

Shelf life code: 7 (3 years)

Maximum age on delivery: 6 months

Belzona Inc. part number 1221 Super E Metal.

See Technical Specifications paragraph(s): T3.2, T4.3, T5.6 and T6.1.

21. 8030-01-519-8281 UI: KT

SEALING COMPOUND

DESCRIPTION

A 2-part epoxy resin system for repairing and rebuilding metals on machinery and equipment.

Size: a 400 gram kit consisting of base resin and hardener in separate containers.

Shelf life code: 9 (5 years)

Maximum age on delivery: 6 months

Belzona Inc. part number 1111 Super Metal.

See Technical Specifications paragraph(s): T3.2, T4.3, T5.6 and T6.1.

22. 8030-99-220-2431 UI: BX

SEALING COMPOUND:

DESCRIPTION

A non-hardening, high-temperature, jointing compound for sealing joints preventing leakage of air or gas at operating temperatures of 550 to 750 deg. C.

Size: 225 grams packaged in tubes. Product come packaged two (2) tubes per box.

Shelf life code: 0 (stable)

Fuchs Lubricants (UK) HLC Part Numbert Renolit 762

See Technical Specifications paragraph(s): T3.6, T4.2, T5.6 and T6.1.

TECHNICAL SPECIFICATIONS

TECHNICAL DOCUMENT

T1.1 In accordance with SAE specification AMS 3265D dated December 2008, Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Nonchromated Corrosion Inhibiting For Intermittent Use to 360 F (182 C).

PRI-QPL-AMS3265 qualification required.

NOTE: Third party certification (NADCAP program) required for this specification.

Applies to item(s) : 16.

T1.2 In accordance with SAE Aerospace Material Specification AMS 3277F, Sealing Compound, Polythioether, Integral Fuel Tanks and General Purpose, Fast Curing, Intermittent Use to 360F (182C), dated December 2010.

PRI QPL qualification required.

NOTE: Third party inspection certification (NADCAP program) required for this specification.

Applies to item(s) : 15.

T1.3 In accordance with Military Specification MIL-C-83019, "Coating, Polyurethane, For Protection of Integral Fuel Tank Sealing Compound", dated November 4, 1968 and Amendment 3, dated January 13, 1995.

Applies to item(s) : 3.

T1.4 In accordance with Military Specification MIL-PRF-23586F dated December 30, 1996 and Amendment 2, dated January 11, 2002, Sealing Compound with Accelerator, Silicone Rubber, Electrical.

QPL qualification required: QPL transformed to QPD, December 2, 2009. Please go to http://assist.daps.dla.mil/quicksearch/, and follow the steps below to view the QPD.

1. input "23586" in document Number field and click "Submit"

2. Click on the primary specification link in "Document ID" column.

3. click on "Qualification" in the "Overview" section to view the QPD.

Applies to item(s) : 1 and 2.

T1.5 In accordance with Military Specification MIL-PRF-81733D, Sealing and Coating Compound, Corrosion Inhibitive, dated May 15, 1998.

QPL qualification required: QPL transformed to QPD, July 24, 2009. Please go to http://assist.daps.dla.mil/quicksearch/, and follow the steps below to view the QPD.

1. input "81733" in document Number field and click "Submit"

2. Click on the primary specification link in "Document ID" column.

3. click on "Qualification" in the "Overview" section to view the QPD.

NOTE: Third party inspection certification (Nadcap program) required for this specification.

Applies to item(s) : 18.

T1.6 In accordance with Military Specification MIL-S-45180D, Sealing Compound, Gasket, Hydrocarbon Fluid and Water Resistant, dated June 4, 1984.

Applies to item(s) : 6.

EXCEPTION(S) TO TECHNICAL DOCUMENT

T2.1

1. In para. 4.7.2., line 2, delete "Federal Test Method Standard 141 Method 4282" and substitute "ASTM Method D 1200 using a no. 4 Ford cup."

2. In para. 4.6.6.1, line 2, delete "Method 5201 of Federal Test Method Standard No. 791" and substitute "ASTM Method D 1266".

3. In para. 4.7.3, lines 8 and 9, delete "Federal Test Method Standard No. 141, Method 4282." and substitute "ASTM Method D 1200 using a no. 4 Ford cup."

Applies to item(s) : 3.

T2.2

1. Para. 1.2.3 Grade. Replace "Grade B1 - ersion resistant, condensation cure" with "Grade B1 - reversion resistant, condensation cure". Replace "Grade B2 - ersion resistant, addition cure" with "Grade B2 - reversion resistant, addition cure".

2. Para. 3.3.1.1. Delete: "There shall be no separation of components that cannot be readily dispersed by mechanical agitation or hand mixing."

Add: "There shall be no separation of Type II sealant components that cannot be redispersed by hand stirring. Type I sealant may experience normal sedimentation or caking on the bottom of the container, provided all Table IV test requirements are met. Optionally, if required to pass test results, Type I sealant shall be redispersed by the following procedure: Pour off the liquid sealant into another container. Using a spatula, scrape the caked pigment/filler from the bottom of the container. Using a flat bottom instrument such as doweling or screwdriver handle, crush the caked filler against the bottom of the container until a smooth paste is formed. Gradually, add the reserved liquid back to the paste while crushing and stirring until a smooth and uniform viscosity. Avoid entrainment of air bubbles while mixing. The base resin should now be suitable for mixing with the curing agent.

Applies to item(s) : 1 and 2.

ITEM MARKING

T3.1 Each item shall be marked with the following:

(1) marking in accordance with SAE Aerospace Standard AS5502, (paragraphs 5.2.1, 5.2.2), and any other specification-unique marking requirements.

(2) instructions for use, thinning, mixing, shaking, etc. on unit containers only

(3) instructions for storage, i.e. do not freeze, requires refrigeration, etc.

(4) if a kit, then each kit component shall be marked with the kit name and component part.

(5) manufacturer's name and part number

(6) if applicable, the maximum volatile organic compound content (VOC), less water and exempt solvents, in lbs/gl or grams/liter.

(7) if the item is on an existing contract, the supplier shall follow the pre-arranged

California South Coast Air Quality Management District labeling requirements.

Applies to item(s) : 15 and 16.

T3.2 Each item shall be marked with the following:

(1) lot or batch number

(2) shelf life monitoring data including dates of manufacture and reinspection or expiration

(3) instructions for use, thinning, mixing, shaking, etc.

(4) instructions for storage, i.e. do not freeze, requires refrigeration, etc.

(5) each kit component shall be marked with the kit name and component part.

(6) manufacturer's name and part number

(7) if applicable, the maximum volatile organic compound content (VOC), less water and exempt solvents, in lbs/gl or grams/liter.

(8) if the item is on an existing contract, the supplier shall follow the pre-arranged

California South Coast Air Quality Management District labeling requirements.

Applies to item(s) : 3, 5, 8, 9, 11, 17, 20 and 21.

T3.3 Special marking for each kit and cartridge shall include:

(1) Specification number, type, class, and grade

(2) lot or batch number

(3) dates of manufacture or shipment and reinspection

(4) manufacturer's name, address, and part number(s)

(5) kit size

(6) instructions for mixing, use, and safety

(7) instructions for storage

(8) each kit component shall be marked with the kit name and component part (part number, base, curing agent, primer if required, as appropriate).

(9) maximum volatile organic content (VOC) less water and exempt solvents in grams per liter or pounds per gallon.

(10) if the item is on an existing contract, the supplier shall follow the pre-arranged

California South Coast Air Quality Management District labeling requirements.

Applies to item(s) : 1 and 2.

T3.4 Each item shall be marked with the following:

(1) MIL-PRF-81733, type, class, and grade

(2) manufacturer's name and part number

(3) lot or batch number

(4) dates of packaging and reinspection for non-premixed and frozen items

(5) dates of mixing and expiration for premixed and frozen items

(6) use of button boards and corresponding numbering for premixed and frozen items

(7) instructions for mixing and use

(8) instructions for storage

(9) maximum volatile organic content (VOC) (less water and exempt solvents) in grams per liter or pounds per gallon.

(10) each component of the kit shall be marked with the kit name and component part.

(11) if the item is on an existing contract, the supplier shall follow the pre-arranged

California South Coast Air Quality Management District labeling requirements.

Applies to item(s) : 18.

T3.5 Each item shall be marked with the following:

(1) marking in accordance with SAE Aerospace Standard AS5502, paragraphs 5.2.1 and 5.2.2 except for specification title, AMS designation, class, and type.

(2) instructions for use, thinning, mixing, shaking, etc. on unit containers only

(3) instructions for storage, i.e. do not freeze, requires refrigeration, etc.

(4) if a kit, then each kit component shall be marked with the kit name and component part.

(5) manufacturer's name and part number

(6) if applicable, the maximum volatile organic compound content

(VOC), less water and exempt solvents, in lbs/gl or grams/liter.

(7) if the VOC of the item exceeds the legal limits for the intended use in the South Coast Air Quality Management jurisdiction, then the product shall be prominently marked in contrasting and highly visible lettering on the outside of the shipping container, "NOT FOR SALE OR USE IN SOUTH COAST AIR QUALITY MANAGEMENT DISTRICT."

Applies to item(s) : 19.

T3.6 Each item shall be marked with the following:

(1) lot or batch number

(2) shelf life monitoring data including dates of manufacture and reinspection or expiration.

(3) manufacturer's name and part number

(4) instructions for use, thinning, mixing, shaking, etc.

(5) instructions for storage, i.e. do not freeze, requires refrigeration, etc.

Applies to item(s) : 6, 7, 12 and 22.

T3.7 Each item shall be marked with the following:

(1) lot or batch number

(2) shelf life monitoring data including starting dates of manufacture and stop/check dates of reinspection or expiration

(3) manufacturer's name and part number

(4) instructions for use on unit containers only

(5) instructions for storage, i.e. do not freeze, refrigeration required, etc.

(6) maximum volatile organic content (VOC) less water and exempt solvents in grams per liter or pounds per gallon.

(7) if the item is on an existing contract, the supplier shall follow the pre-arranged

California South Coast Air Quality Management District labeling requirements.

Applies to item(s) : 4 and 14.

T3.8 Special marking on each individual container shall include:

(1) manufacturer's name and part number

(2) lot or batch number

(3) dates of manufacture and reinspection

(4) instructions for use

(5) instructions for storage on individual containers, unit boxes, and shipping containers.

(6) if the item is on an existing contract, the supplier shall follow the pre-arranged

California South Coast Air Quality Management District labeling requirements.

(7) if applicable, the maximum volatile organic content (VOC) less water and exempt solvents in grams per liter or pounds per gallon.

Applies to item(s) : 10 and 13.

PACKAGING

T4.1 PACKAGING: The product shall be furnished in the specified quantities in a grease-proof bag and packed in a paperboard or fiberboard box of the type normally used for this product provided that there will be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality or purity of the contents. The filled containers shall be closed in a manner that will insure that the contents will not spill or leak from the container during shipment, handling, storage and redistribution. The package shall, as a minimum, meet the applicable requirements of the National Motor Freight Classification, Uniform Freight Classification, U.S. Postal Service regulations and the Department of Transportion regulations.

Applies to item(s) : 7.

T4.2 PACKAGING: The product shall be furnished in the specified quantities packaged in the manufacturer's original containers and in accordance with normal commercial practice. There shall be no interaction chemically or physically with the contents so as to damage the containers or alter the strength, quality, or purity of the contents. The filled containers shall be closed in a manner that will insure the contents will not spill or leak from the containers during shipment, handling, storage, and redistribution.

Applies to item(s) : 4, 10, 12, 13, 14 and 22.

T4.3 KIT PACKAGING: The product shall be furnished in the specified kit size quantities packaged in the manufacturer's original, separate containers and in accordance with normal commercial practice. There shall be no interaction chemically or physically with the contents so as to damage the containers or alter the strength, quality, or purity of the contents. Such packaged ingredients shall be further packaged or assembled together as a complete unit in kit form. The filled containers and kit assembly shall be closed in a manner that will insure the contents will not spill or leak from the containers and that separation of the components will be prevented during shipment, handling, storage, and redistribution.

Applies to item(s) : 5, 9, 11, 17, 20 and 21.

T4.4 KIT PACKAGING: Separate base material shall be furnished in the specified quantities in compound lined, double-seamed end cans with multiple friction closure of the type normally used for this product, and curing agent shall be furnished in the specified quantities in resealable, resin-lined cans, glass, or plastic containers. There will be no interaction chemically or physically with the contents which would damage the container or alter the strength, quality, or purity of the contents. The containers shall not spill or leak during shipment, handling, storage, and redistribution. Packaged components shall be further wrapped, boxed, or containerized together (hot-melt method alone not acceptable) as a complete unit in kit form so that they shall not accidentally separate during shipment, handling, storage, and redistribution. Sealed containers shall be moisture-proof.

Applies to item(s) : 2, 3, 8 and 18.

T4.5 KIT PACKAGING: Components of a product required to be furnished in separate containers shall be packaged in the quantities specified above and in accordance with the supplier's normal commercial practice. There shall be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality, or purity of the contents. Such packaged ingredients shall be further packaged or assembled together as a complete unit in kit form. The filled containers and kit assembly shall be closed in a manner that will insure the contents will not spill or leak from the container and that separation of the components will be prevented during shipment, handling, storage, and redistribution.

Applies to item(s) : 1.

T4.6 KIT PACKAGING: Separate base and curing agent material shall be loaded into resealable, compound-lined, double-seamed end cans or plastic containers. There shall be no interaction chemically or physically with the contents, which would damage the container, or alter the strength, quality or purity of the contents. The containers shall not spill or leak during shipment, handling, storage, and redistribution. Packaged components shall be further wrapped, boxed or containerized together (hot-melt method alone not acceptable) as a complete unit in kit form, so they shall not accidentally separate during shipment, handling, storage and redistribution. Sealed containers shall be moisture-proof.

Applies to item(s) : 16.

T4.7 PACKAGING: The product shall be furnished in cartridges conforming to Military Specification MIL-S-38714B, Sealant Cartridge for Two Component Materials, dated May 15, 1987. There shall be no interaction chemically or physically with the contents which would damage the container or alter the strength, quality, or purity of the contents. Each filled cartridge shall be sealed in an appropriate type bag/envelope. The cartridges shall be closed in a manner that insures the contents shall not spill or leak during shipment, handling, storage, and redistribution.

Applies to item(s) : 15 and 19.

T4.8 PACKAGING: The product shall be furnished in the specified quantities in collapsible metal or plastic tube made and fitted for a vapor-tight, resealable screw cap. The tube nozzle shall be factory-sealed for puncture by the user. There shall be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality, or purity of the contents. The filled tubes shall be closed so that the contents will not spill or leak from the tube during shipment, handling, storage and redistribution.

Applies to item(s) : 6.

PACKING

T5.1 PACKING: Not more than 25 cartridges of material packaged as specified above shall be vertically packed in a close-fitting, corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification (200 burst, 32 min. ECT). The cartridges shall be packed in a manner, including full height partition cells if necessary, that will prevent damage to the cartridges during shipment, handling, storage, and redistribution. Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. Gross weight of the box and contents shall not exceed 65 pounds.

Applies to item(s) : 14.

T5.2 PACKING: Twenty-four (24) injection cartridges packaged as described above shall be further packed in a close-fitting, corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification (200 minimum burst). Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. Gross weight of the box and contents shall not exceed 65 pounds.

Applies to item(s) : 15 and 19.

T5.3 PACKING: Material packaged as specified above shall be packed in a close-fitting, corrugated, fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification (200 minimum burst). Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. Gross weight of the box and contents shall not exceed 65 pounds.

Applies to item(s) : 3, 4, 5, 7, 8, 9, 11 and 16.

T5.4 Shall be furnished in the units indicated and packaged as follows:

Kit Packaging: Ingredients of a product required to be furnished in separate containers shall be packaged according to the manufacturer's normal commercial practice. Such packaged components shall be further packaged or assembled together as a complete unit in kit form. The kit assembly shall be such that it will prevent accidental separation of the components during shipment, handling, storage and redistribution. All containers shall be such that there will be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality or purity of the contents. One and five gallon cans shall be provided with a bail type handle in accordance with normal commercial practice. The filled containers shall be closed in a manner that will insure that the contents will not spill or leak from the container during shipment, handling, storage and redistribution.

Applies to item(s) : 17.

T5.5 INTERMEDIATE PACKAGING: Not more than 25 units packaged as specified above shall be further packaged in a close fitting corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification. Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. The units shall be protected within the box by individually packaging in paperboard boxes or with full height partitions or other suitable means to ensure that the containers are not damaged during shipment, handling, storage, and redistribution.

PACKING: Intermediate packaged boxes may be further packed in a close-fitting, corrugated, fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification (UFC) and Item 222 of the National Motor Freight Classification. Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the UFC. Gross weight of box and contents shall not exceed 65 pounds.

Applies to item(s) : 6 and 10.

T5.6 INTERMEDIATE PACKAGING: Not more than 25 units packaged as specified above shall be further packaged in a close fitting corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification. Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification.

PACKING: Intermediate packaged boxes may be further packed in a close-fitting, corrugated, fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification (UFC) and Item 222 of the National Motor Freight Classification. Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the UFC. Gross weight of box and contents shall not exceed 65 pounds.

Applies to item(s) : 1, 2, 12, 18, 20, 21 and 22.

MARKING

T6.1 All unit, intermediate, transport packages and unit loads shall be marked and bar coded in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site:

http://assist.daps.dla.mil/quicksearch/.

South Coast Air Quality Management District Provision: If the item is on an existing contract, the supplier shall follow the pre-arranged California South Coast Air Quality Management District labeling requirements.

PALLETIZATION

Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free.

Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight for shipments to Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (Sharpe).

Stacking Strength: The pallet plus the load shall be capable of supporting two additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength.

Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet.