Pin Market Survey QSDM-J8-100435-N IPDs.docx

DOCX document 42 KB Posted Jul 30, 2010

Attached to: QSDM-J8-100435-N
Solicitation number: QSDM-J8-100435-N
Issued by: GSA Federal Acquisition Service

About this file

From the source

Pre-Invitation Notice (PIN Market Survey) Item Purchase Descriptions (IPDs)

View the file

Other files

File	Type	Posted
Pin Market Survey QSDM-J8-100435-N.docx	DOCX document	Jul 30, 2010

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Pre-Invitation Notice (PIN Market Survey) Item Purchase Descriptions

QSDM-J8-100435-N

Post Date: July 16, 2010 Response Date: August 6, 2010

Please read the following excerpt taken from FAR 52.212-1 regarding the availability of requirements documents cited in the solicitation, as potentially referenced in the Item Purchase Descriptions.

(i) Availability of requirements documents cited in the solicitation.

(1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to— GSA Federal Supply Service Specifications Section Suite 8100 470 East L’Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925 Facsimile (202) 619-8978.

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.

(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(i) ASSIST (http://assist.daps.dla.mil).

(ii) Quick Search (http://assist.daps.dla.mil/quicksearch).

(iii) ASSISTdocs.com (http://assistdocs.com).

(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by—

(i) Using the ASSIST Shopping Wizard (http://assist.daps.dla.mil/wizard);

(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

ITEM PURCHASE DESCRIPTION QSDM-J8-100435-N

1. 5110-00-018-0952 UI: SE

KNIFE SET, CRAFTSMAN'S:

DESCRIPTION

The set shall consist of three (3) knives, ten (10) interchangeable blades and a container.

Knives: The set shall include a light-duty fixed holder with a beveled blade, a medium-duty fixed holder with a close corner blade and a heavy-duty fixed holder.

Blades: The additional blades shall be of the following styles: one curved, three beveled, one stencil cutting, one square, one broad, one curved, one double edged and one close corner.

Container: Wooden box case.

Berwind Corp., Elmer's Products, Inc., X-Acto Division part number X5082, Congruent Machinery Co.,Inc part number 30820 or equal.

Offering on:

Manufacturer's Name: __________________________

Brand___________________________________

Model or Part No. __________________________________

See Technical Specifications paragraph(s): TB.1, T3.1, T4.3, T5.1 and T6.1.

2. 5110-00-293-0460 UI: EA

CUTTER, PIPE:

DESCRIPTION

Pipe Cutter Used for cutting steel or wrought iron pipes.

Pipe Cutting Range: 1/8" to 2".

Design: Hand operated sliding feed member pipe cutter with one 9/16" cutter wheel and two 3/4" rollers.

The cutter shall consist of a frame (or body), a feed member, a feed rod with handle, one cutter wheel and two rollers, and three pins on which the cutter wheel and rollers operate.

Frame: Shall be of forged steel, or other suitable alloy, and possess adequate strength to satisfactorily cut the pipe materials specified.

Feed Member (screw): Shall be steel and of sufficient size to withstand the bending and torque loads without evident distortion when in use. The portion of the feed screw which bears on the sliding feed member shall be hardened to show a minimum hardness of Rockwell C 45.

Handle: A smoothly finished, suitably shaped handle, affording a comfortable grip, shall be firmly fixed to the outer end of the feed rod. The handle shall be made of steel.

Cutter wheel: Shall be of alloy steel, hardened and tempered to show at any point on the wheel a Rockwell C hardness of 56 to 64, inclusive. The wheel shall rotate freely on its supporting pin.

Rollers: Shall be of steel, hardened to show a Rockwell C hardness of 55 to 63, inclusive. The rollers shall rotate freely on their supporting pins.

Pins: Shall be of steel, heat treated so that the bodies show a Rockwell C hardness of 55 to 63, inclusive. The pins shall properly support and permit rotation of the cutter wheels and rollers, and shall be easily replaceable.

See Technical Specifications paragraph(s): TE.6, T3.1, T4.3, T5.1 and T6.1.

3. 5110-00-293-3402 UI: EA

CUTTER, TUBE:

DESCRIPTION

The cutter shall be designed for cutting soft metal tubing such as aluminum, lead, copper, or brass.

Type: Cutter with enclosed feed mechanism.

Cutting Capacity: Tubing with 1/4" to 1-3/8" outside diameter.

Overall Length: 6" in fully opened position.

Features: A spare cutter wheel shall be provided. The spare wheel shall be securely attached to the cutter and readily available for fast replacement. It shall be adequately shielded against damage under normal service operations and not interfere with proper operation.

A replaceable steel deburring tool will be provided with the cutter.

The cutter shall make smooth right angle cuts and be provided with close flare cutoff capability.

4. 5110-00-329-3299 UI: EA

ICE SCRAPER AND CHIPPER, SIDEWALK:

DESCRIPTION

Ice scraper and chipper for sidewalk use.

Blade Dimensions: 6-5/8" wide (minimum) by 5-1/4" height (minimum) and 0.090" thick (minimum) at any point above the cutting edge.

The ice scraper shall have a high grade steel blade. The blade hardness shall be 25 to 47 on the Rockwell "C" scale.

The handle of the scraper shall be made of seasoned SA grade ash, smoothly finished and covered with one coat of transparent lacquer, varnish or one coat of wax after surface treatment utilizing heat.

Overall Length: 55" to 65".

See Technical Specifications paragraph(s): T3.1, T4.2, T5.1 and T6.1.

5. 5110-00-359-6478 UI: PG

BLADE, CRAFTSMAN'S KNIFE:

DESCRIPTION

Knife blade with a sharp angled cutting edge to be used for delicate, precision cutting, trimming and stripping.

Material: Steel.

The blade shall fit the X-ACTO No 1, 1SGK, Super No. 1 X-Press, Gripster, Cut-All and No. 3 Pen Knives.

Berwind Corp., Elmer's Products, Inc., X-Acto Division Part Number X11 or equal.

See Technical Specifications paragraph(s): TE.6, TB.1, T3.1, T4.1, T5.1 and T6.1.

6. 5110-00-595-8402 UI: EA

KNIFE, CRAFTSMAN'S:

DESCRIPTION

Square Point Craftsman's Knife Often referred to as "Shoe Knife" and used primarily for cutting tough leather.

Item consists of a carbon steel blade, handle, and ferrule.

The blade shall be taper ground the entire length of the cutting edge. The shank (or tang) end of the blade shall be fitted with a metal ferrule.

Handle: The handle shall be made of hardwood with a coating of varnish or lacquer to minimize absorption of moisture. The shank (or tang) shall be inserted into the wooden handle until the metal ferrule covers the end of the wooden handle to prevent splitting and to support the blade. The wooden handle shall be secured to the metal shank to prevent slipping off while the knife is in use.

Style: Straight, Square point.

Cutting Blade Length: 6-1/4" Blade Width: 1".

Handle Length: 4-1/8" (including ferrule).

7. 5110-00-595-8403 UI: EA

KNIFE, CRAFTSMAN'S:

DESCRIPTION

Square Point Craftsman's Knife Often referred to as "Shoe Knife" and used primarily for cutting tough leather.

Item consists of a carbon steel blade, handle, and ferrule.

The blade shall be taper ground the entire length of the cutting edge. The shank (or tang) end of the blade shall be fitted with a metal ferrule.

Style: Straight, Square point.

Cutting Blade Length: 4" minimum to 4-1/2" maximum.

Blade Width: 3/4" (+/- 1/8").

Handle Length: 4-1/8" (including ferrule, +/- 1/4").

8. 5110-00-596-1133 UI: SE

REAMER SET, HAND:

DESCRIPTION

Set shall consist of twenty-five (25) reamers and a container.

Type: Hand Reamer.

Shank Type: Straight Round with square end.

Flute Design: Straight Diameters: 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64 and 1/2 inch.

Material: High speed steel.

See Technical Specifications paragraph(s): T1.4, T3.1, T4.3, T5.1 and T6.1.

List of Components of 5110-00-596-1133:

8.1. 5110-00-186-6687 Qty: 1 UI: EA

REAMER, HAND:

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Type: Reamer, Hand Overall Length: 3.000 inches Diameter: 0.125 inches Flute Length: 1.500 inches Shank Type: Straight Round w/square end Flute Design: Straight Material: Steel, High Speed

See Technical Specifications paragraph(s): TE.6, T1.4.

8.2. 5110-00-268-1253 Qty: 1 UI: EA

REAMER, HAND:

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 5/32".

Overall Length: 3-1/4".

Flute Length: 1-5/8".

Material: High Speed Steel.

8.3. 5110-00-260-1665 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 3/16".

Overall Length: 3-1/2".

Flute Length: 1-3/4".

8.4. 5110-00-186-6693 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Hand reamer with straight flutes and squared shank Material: high speed steel Overall length: 3.750" Diameter: 7/32 inch Flute Length: 1.875"

See Technical Specifications paragraph(s): T1.4.

8.5. 5110-00-260-1664 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Overall Length: 4.000 inches Diameter: 0.2500 inches Flute Length: 2.000 inches Shank Type: Straight Round w/Square End Reamer Type: Hand

8.6. 5110-00-186-6697 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 9/32".

Overall Length: 4-1/4".

Flute Length: 2-1/8".

8.7. 5110-00-255-6600 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Type: Reamer Hand Overall Length: 4.500 inches Diameter: 0.3125 inches Flute Length: 2.250 inches Shank Type: Straight Round w/Square End Reamer Type: Hand

8.8. 5110-00-260-1668 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Overall Length: 4.750 inches Diameter: 0.3438 inches Flute Length: 2.375 inches Shank Type: Straight Round w/square end Reamer Type: Hand

8.9. 5110-00-255-6579 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Type: Reamer Hand Overall Length: 5.000 inches Diameter: 0.3750 inches Flute Length: 2.500 inches Shank Type: Straight Round w/Square End Reamer Type: Hand

8.10. 5110-00-260-1671 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Overall Length: 5.250 inches Diameter: 0.4062 inches Flute Length: 2.625 inches Shank Type: Straight Round w/Square End Reamer Type: Hand

8.11. 5110-00-268-1258 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 7/16".

Overall Length: 5-1/2".

Flute Length: 2-3/4".

8.12. 5110-00-260-1641 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Type: Reamer Hand Overall Length: 5.750 inches Diameter: 0.4688 inches Flute Length: 2.875 inches Shank Type: Straight Round w/Square End Reamer Type: Hand

8.13. 5110-00-255-6541 Qty: 1 UI: EA

REAMER HAND:

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 1/2".

Overall Length: 6".

Flute Length: 3".

8.14. 5110-00-186-6688 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Reamer, Hand Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 0.1406 in.

Overall Length: 3.250 in.

Flute Length: 1.625 in.

8.15. 5110-00-186-6690 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 11/64".

Overall Length: 3-1/2".

Flute Length: 1-3/4".

8.16. 5110-00-186-6692 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 13/64".

Overall Length: 3-3/4".

Flute Length: 1-7/8".

8.17. 5110-00-186-6694 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 15/64".

Overall Length: 4".

Flute Length: 2".

8.18. 5110-00-260-1640 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 17/64".

Overall Length: 4-1/4".

Flute Length: 2-1/8".

8.19. 5110-00-186-6698 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 19/64".

Overall Length: 4-1/2".

Flute Length: 2-1/4".

8.20. 5110-00-260-1667 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 21/64".

Overall Length: 4-3/4".

Flute Length: 2-3/8".

8.21. 5110-00-186-6702 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 23/64".

Overall Length: 5".

Flute Length: 2-1/2".

8.22. 5110-00-186-6704 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 25/64".

Overall Length: 5-1/4".

Flute Length: 2-5/8".

8.23. 5110-00-801-1431 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 27/64".

Overall Length: 5-1/2".

Flute Length: 2-3/4".

8.24. 5110-00-186-6710 Qty: 1 UI: EA

DESCRIPTION

IAW Table 3: Hand Reamers with Straight Flutes & Squared Shank (HSS).

Flute Design: Straight.

Shank: Straight round with square end.

Diameter: 31/64".

Overall Length: 6".

Flute Length: 3".

Diameter 31/64 inch.

End of 5110-00-596-1133 Components List

9. 5110-00-177-7286 UI: EA

STRIPPER, WIRE, HAND:

DESCRIPTION

Blade Size: 2E.

Cable/Wire Size Accommodated: 16, 18, 20, 22, 24, 26 AWG, stranded Features Provided: Automatic stop return Special Features: Vinyl grip handles; for stripping type E Teflon insulation (200 deg. Celsius - 600 V) Style Designator: Pivot handle style Note: Short stop latch (Ideal P/N L-5269) and wire stop assembly (Ideal P/N L-5270) are provided unassembled with the main wire stripper body.

Ideal Industries Inc. P/N 45-177 or equal.

See Technical Specifications paragraph(s): TE.6, TB.1, T3.1, T4.3, T5.1 and T6.1.

10. 5110-00-221-1049 UI: EA

CUTTER, PIPE:

DESCRIPTION

Pipe Cutter Used for cutting steel or wrought iron pipes.

Pipe Cutting Range: 2" to 4".

Design: Hand operated sliding feed member pipe cutter with one 3/4" cutter wheel and two 1" rollers.

The cutter shall consist of a frame (or body), a feed member, a feed rod with handle, one cutter wheel and two rollers, and three pins on which the cutter wheel and rollers operate.

Frame: Shall be of forged steel, or other suitable alloy, and possess adequate strength to satisfactorily cut the pipe materials specified.

Handle: A smoothly finished, suitably shaped handle, affording a comfortable grip, shall be firmly fixed to the outer end of the feed rod. The handle shall be made of steel.

Cutter wheel: Shall be of alloy steel, hardened and tempered to show at any point on the wheel a Rockwell C hardness of 56 to 64, inclusive. The wheel shall rotate freely on its supporting pin.

Rollers: Shall be of steel, hardened to show a Rockwell C hardness of 55 to 63, inclusive. The rollers shall rotate freely on their supporting pins.

Ridgid Tools part number 4-S Heavy-Duty or equal.

See Technical Specifications paragraph(s): TE.6, TB.1, T3.1, T4.3, T5.1 and T6.1.

11. 5110-00-273-0126 UI: EA

SHEARS, METAL CUTTING, HAND:

DESCRIPTION

Type: II (Compound Lever [Aviation]).

Class: 3 (Circular Cutting to the Left).

Nominal Size: 10

See Technical Specifications paragraph(s): TE.6, T1.2, T3.1, T4.3, T5.1 and T6.1.

12. 5110-00-273-0127 UI: EA

DESCRIPTION

Type: II (Compound Lever [Aviation]).

Class: 2 (Circular Cutting to the Right).

13. 5110-00-273-0128 UI: EA

DESCRIPTION

Type: II (Compound Lever [Aviation]).

Class: 1 (Straight Cutting).

14. 5110-00-293-0089 UI: EA

DESCRIPTION

Type: I (Tinner).

Class: 1 (Straight cut).

Style: B (Medium duty).

Nominal Size: 12-1/2".

Feature: Cushion grip handles.

15. 5110-00-222-2708 UI: EA

PLIERS, DIAGONAL CUTTING:

DESCRIPTION

Type: I (Diagonal cutting, regular nose).

Class: 1 (Plain).

Style: A (Standard cutting edges).

Nominal Size: 7-1/2" Feature: Comfort grip handles.

See Technical Specifications paragraph(s): TE.6, T1.1, T3.1, T4.3, T5.1 and T6.1.

16. 5110-00-224-1532 UI: EA

DESCRIPTION

Type: I (Diagonal cutting, regular nose).

Class: 2 (With stripping notches and skinning hole).

Style: A (Standard cutting edges).

Nominal Size: 6".

17. 5110-00-239-8253 UI: EA

PLIERS, DIAGONAL CUTTING

DESCRIPTION

PLIERS, DIAGONAL CUTTING

Diagonal Cutting Pliers Type: I (Diagonal cutting, regular nose).

Class: 1 (Plain).

Style: A (Standard cutting edges).

Nominal Size: 6".

18. 5110-00-618-2700 UI: EA

DESCRIPTION

Diagonal Cutting Pliers Type: I (Diagonal cutting, regular nose).

Class: 1 (Plain).

Style: A (Standard cutting edges).

Nominal Size: 4-1/2".

Feature: Vinyl Grip Handles.

19. 5110-00-935-0890 UI: EA

DESCRIPTION

Type: I (Diagonal cutting, regular nose).

Class: 1 (Plain).

Style: A (Standard cutting edges).

Nominal Size: 4".

See Technical Specifications paragraph(s): TE.6, T1.1, T3.1, T4.2, T5.1 and T6.1.

20. 5110-00-162-2203 UI: EA

SHEARS, BENT TRIMMERS:

DESCRIPTION

Design: The shears shall be Overall Nominal Length of 9" long with a minimal length of 4" cut. The shears shall be designed with bent handles and the blades shall be joined with a steel bolt or screw with a steel bushing.

Blade Design: Provided with one blade pointed and one blade beveled or with two sharp pointed blades.

Blade Material: The blades shall be chrome-over-nickel plated. The coating shall have a minimum thickness of 0.00008" nickel and 0.000003" chromium. The blade hardness shall be 52 to 61 on the Rockwell "C" scale when tested in accordance with the ASTM E18 Standard.

Handles: The handles shall be steel and japanned, coated with glossy lacquer, varnish or enamel paint.

See Technical Specifications paragraph(s): T3.1, T4.3, T5.1 and T6.1.

21. 5110-00-268-4224 UI: EA

STRIPPER, WIRE, HAND

DESCRIPTION

Hand Wire Stripper Hand wire stripper with floating pivot handles and replaceable cutting blades.

Floating Pivot Handles: Provided with an automatic stop return to prevent return of the spring loaded handles until after the stripped wire is removed.

Blade Size: 4 Cutting Capacity: Shall strip insulation from wire sizes 8, 10, 12, 14, 16, 18, 20, and 22 AWG. Number 8 Standard solid number 10-22 solid and stranded.

Blades: The blades shall be interchangeable with the stripper's manufacturer.

Feature: Serrated gripping jaws designed to firmly grip but not damage wire or insulation.

Overall length: 7-1/4".

Vinyl Grip Handles

22. 5110-00-236-3272 UI: EA

CHISEL, COLD, HAND

DESCRIPTION

Type: I (Chisels) Class: 2 (Cold) Cutting Edge Width: 3/4" (+0.050", -0.030") Overall Length: 6-1/2" (+/-0.5") Material: Steel Shank Width Across Flats: 5/8" Shank Shape: Hexagonal

See Technical Specifications paragraph(s): TE.6, T1.3, T3.1, T4.3, T5.1 and T6.1.

23. 5110-00-293-2865 UI: PG

BLADE, KNIFE

DESCRIPTION

Blade, Knife Overall Length: 2.328 in. (+.020", -.015") Blade Thickness: 0.025 in. (+/- .001") Special Features: Utility type; tapered with pointed ends; 3/4 in. blade width; 5 per pkg

See Technical Specifications paragraph(s): TE.6, T3.1, T4.1, T5.1 and T6.1.

24. 5110-00-997-4237 UI: EA

SCRAPER, GLASS, RAZOR BLADE:

DESCRIPTION

The scraper blade holder shall accommodate a standard single edge razor blade.

Dimension: The scraper shall be 1-5/8" wide by 1/4" thick.

Material: The scraper housing shall be metal and have a corrosion resistant finish.

Features: When the blade is retracted, the holder shall cover the blade completely. A means shall be provided to lock the blade securely in the extended position.

Five (5) standard single-edged razor blades shall be included.

25. 5110-01-430-5043 UI: EA

MULTI-TOOL, FOLDING, POCKET:

DESCRIPTION

The multi-tool shall be a folding design where the handles rotate about the pliers' head and enclose all components within the handle body.

The multi-tool shall be fabricated from stainless steel and shall have a black oxide finish. The stainless steel used shall have such properties as to provide for tool capability to withstand abrasive wear, maintain the original shape of its overall structure and components, and retain a keen edge on all cutting blades for the entire service-life of the tool.

The multi-tool shall have a needle nose and curved gripper combination jaw pliers containing wire and hardwire cutters. The needle nose portion shall have gripping surfaces, scored either straight or diamond pointed suitable for gripping flat surfaces, and the gripper jaws shall have pointed teeth, suitable for gripping round surfaces. An electrical crimper shall be located below the jaws joint.

The handles of the multi-tool shall be designed to provide adequate space accommodating all components tightly and orderly folded within the handles. The design of the handles shall provide a firm and comfortable grip. An etched, engraved or stamped English/Metric ruler shall be located on either the back or the side of the handles. The ruler shall have a minimum length of nine (9) inches/twenty-three (23) centimeters, graduated in one-eighth (1/8) of an inch/one (1) millimeter increments.

All components shall be positively locked when in open or closed position by a mechanism within the pivoting point. All components shall be easily withdrawn individually from the handles and have an independent tool rotation to prevent tools from clumping together.

The multi-tool shall be furnished, in addition to above, with the following components:

- Clip-point knife blade, overall length 2-1/2 inches +/- 1/4 inch

- Sheep-foot or Drop-point serrated knife blade, overall length 2-1/2 inches +/- 1/4 inch

- Wood/Bone saw, overall length 2-1/2 inches +/- 1/4 inch

- Metal/Wood file, overall length 2-1/2 inches +/- 1/4 inch

- Can/Bottle opener

- Small screwdriver (accommodates #0 flat tip screw size)

- Medium screwdriver(accommodates #4 flat tip screw size)

- Large screwdriver(accommodates #8 flat tip screw size)

- Phillips screwdriver(accommodates #2 through #10 screw sizes)

- Wire stripper

- AWL punch

Multi-tool overall length in closed position: 4-1/2 inches +/-1/4 inch.

The sheath shall be of a single pocket design with flap closure to securely contain the multi-tool. Material shall be high quality leather. The flap closure shall be secured by snap button. The sheath shall be provided with a belt loop that allows the sheath to be in the vertical position. The multi-tool shall be easily gripped and released from the sheath.

26. 5110-01-430-5045 UI: EA

DESCRIPTION

The multi-tool shall be a folding design where the handles rotate about the pliers' head and enclose all components within the handle body.

The multi-tool shall be furnished, in addition to above, with the following components:

- Clip-point knife blade, overall length 2-1/2 inches +/- 1/4 inch

- Sheep-foot or Drop-point serrated knife blade, overall length 2-1/2 inches +/- 1/4 inch

- Wood/Bone saw, overall length 2-1/2 inches +/- 1/4 inch

- Metal/Wood file, overall length 2-1/2 inches +/- 1/4 inch

- Can/Bottle opener

- Small screwdriver (accommodates #0 flat tip screw size)

- Medium screwdriver (accommodates #4 flat tip screw size)

- Large screwdriver (accommodates #8 flat tip screw size)

- Phillips screwdriver (accommodates #2 through #10 screw sizes)

- Wire stripper

- AWL punch

The sheath shall be a single pocket design with flap closure to securely contain the multi-tool. Material shall be black heavy-duty synthetic material. The flap closure shall be secured by Velcro. The sheath shall be provided with a belt loop that allows the sheath to be in the vertical position. The multi-tool shall be easily gripped and released from the sheath.

27. 5110-01-430-5048 UI: EA

DESCRIPTION

The multi-tool shall be a folding design where the handles rotate about the pliers' head and enclose all components within the handle body.

The multi-tool shall have a needle nose and curved gripper combination jaw pliers containing wire and hardwire cutters. The needle nose portion shall have gripping surfaces scored either straight or diamond pointed suitable for gripping flat surfaces, and the gripper jaws shall have pointed teeth, suitable for gripping round surfaces. An electrical crimper shall be located below the jaws joint.

The multi-tool shall be furnished, in addition to above, with the following components:

- Clip-point knife blade, overall length 2-1/2 inches +/- 1/4 inch

- Sheep-foot or Drop-point serrated knife blade, overall length 2-1/2 inches +/- 1/4 inch

- Metal/Wood file, overall length 2-1/2 inches +/- 1/4 inch

- Can/Bottle opener

- Wood/Bone saw

- Small screwdriver (accommodates #0 flat tip screw size)

- Medium screwdriver (accommodates #4 flat tip screw size)

- Large screwdriver (accommodates #8 flat tip screw size)

- Phillips screwdriver (accommodates #2 through #10 screw sizes)

- Cap crimper

- AWL punch

28. 5110-01-430-5051 UI: EA

DESCRIPTION

The multi-tool shall be a folding design where the handles rotate about the pliers' head and enclose all components within the handle body.

The multi-tool shall have a needle nose and curved gripper combination jaw pliers containing wire and hardware cutters. The needle nose portion shall have gripping surfaces scored either straight or diamond pointed suitable for gripping flat surfaces, and the gripper jaws shall have pointed teeth, suitable for gripping round surfaces. An electrical crimper shall be located below the jaws joint.

The multi-tool shall be furnished, in addition to above, with the following components:

- Needle nose pliers

- Regular pliers

- Wire cutters

- Clip-point knife blade, overall length 2-1/2 inches +/- 1/4 inch

- Sheep-foot or Drop-point serrated knife blade, overall length 2-1/2 inches +/- 1/4 inch

- Wood/Bone saw, overall length 2-1/2 inches +/- 1/4 inch

- Metal/Wood file, overall length 2-1/2 inches +/- 1/4 inch

- Can/Bottle opener

- Small screwdriver (accommodates #0 flat tip screw size)

- Medium screwdriver (accommodates #4 flat tip screw size)

- Large screwdriver (accommodates #8 flat tip screw size)

- Phillips screwdriver (accommodates #2 through #10 screw sizes)

- Ruler

- Wire stripper

- Cap crimper

- AWL punch

- Lanyard ring

The sheath shall be a single pocket design with flap closure to securely contain the multi-tool. Material shall be, camouflage in color, heavy-duty synthetic material. The flap closure shall be secured by Velcro. The sheath shall be provided with a belt loop that allows the sheath to be in the vertical position. The multi-tool shall be easily gripped and released from the sheath.

29. 5110-00-180-2892 UI: EA

CUTTER, RIVET

DESCRIPTION

Cutter shall be capable of cutting aluminum rivets (except rivets made of aluminum 1100F) with universal or countersunk heads of 1/16, 3/32, 1/8, 5/32, 3/16, and 1/4 inch in diameter in predetermined lengths of 1/4 to 3/4 inch in increments of 1/16 inch by use of 8 interchangeable gauges.

Design: The cutter shall be the squeeze type with all metal construction and capable of shearing the rivets by an inward movement of the handles.

The contact surface of the shearing blades shall have a hardness of Rockwell "C" 55 to 65 and the rivet receiver holes shall be chamfered 40 degrees to 1/64" for easy access and removal of rivets.

Maximum operating force when cutting a 1/4" diameter rivet shall not exceed 100 pounds.

Dimensions: Overall length of 16" maximum, not to exceed 6" width in open position.

Weight: 2-1/2 lbs maximum.

Finish: Cutter shall have a rust preventive finish.

ATI Industries Incorporated Part Number AT501S or equal.

30. 5110-01-346-5341 UI: EA

KNIFE, POCKET:

DESCRIPTION

Multipurpose pocket survival tool constructed of stainless steel. Overall length 4-7/8 inches closed, plus or minus 1/8 inch. Weight 7 to 9 ounces; Black oxide finish. Plier head shall retract and slide into the handle. Other components shall fold into the handles, and when opened, shall lock in the open position and be released by lock release mechanisms on outside of handles. Tool shall consist of the following components:

Drop Point Knife Blade Bottle Opener File Three Flat Tip Screwdrivers Pliers One Phillips Tip Screwdriver Ruler Serrated Knife Blade Lanyard Eye Can Opener Crimper Wire cutters consisting of replaceable, indexable, triangular shaped carbide insert cutter bits located in the jaws

A Black Synthetic Heavy Duty Sheath with Velcro Closure and Belt Loop

Fiskars Brands /Gerber Legendary Blades Part Number 07520G1 or equal

31. 5110-01-394-6252 UI: EA

DESCRIPTION

Multi-purpose, Multi-plier pocket tool constructed of stainless steel. Overall length 5 1/8 inches closed, plus or minus 1/8 inch; Weight 8 ounces; Black finish. Plier head shall retract and slide into the handle. Other components shall fold into the handles, and when opened, shall lock in the open position and be released by lock release mechanisms on outside of handles. Nylon sheath included. Tool shall consist of the following components:

Drop Point Knife Blade 3 flat tip screwdrivers File Needle nose Pliers One Phillips Tip Screwdriver Ruler Serrated sheepsfoot Knife Blade Lanyard ring Can Opener Crimper Wire cutters Wire cutters consisting of replaceable indexable triangular shaped carbide insert cutter bits located in the jaws.

Bottle opener Scale

Fiskars Brands /Gerber Legendary Blades Part Number GB7550 or equal

32. 5110-01-430-5056 UI: EA

DESCRIPTION

The multi-tool shall be a folding design where the handles rotate about the pliers' head and enclose all components within the handle body.

The multi-tool shall be fabricated from stainless steel and shall have a polished stainless steel finish. The stainless steel used shall have such properties as to provide for tool capability to withstand abrasive wear, maintain the original shape of its overall structure and components, and retain a keen edge on all cutting blades for the entire service-life of the tool.

The handles of the multi-tool shall be designed to provide adequate space accommodating all components tightly and orderly folded within the handles. The design of the handles shall provide a firm and comfortable grip. An etched, engraved or stamped English/Metric ruler shall be located on either the back or the side of the handles. The ruler shall have a length of nine (9) inches/twenty-three (23) centimeters(+/-1.00 inches), graduated in one-eighth (1/8) of an inch.

The multi-tool shall be furnished, in addition to above, with the following components:

- Clip-point knife blade, overall length 2-1/2 inches +/- 1/4 inch

- Sheep-foot or Drop-point serrated knife blade, overall length 2-1/2 inches +/- 1/4 inch

- Wood/Bone saw, overall length 2-1/2 inches +/- 1/4 inch

- Metal/Wood file, overall length 2-1/2 inches +/- 1/4 inch

- Can/Bottle opener

- Small screwdriver (accommodates #0 flat tip screw size)

- Medium screwdriver (accommodates #4 flat tip screw size)

- Large screwdriver (accommodates #8 flat tip screw size)

- Phillips screwdriver (accommodates #2 through #10 screw sizes)

- Wire stripper

- Cap crimper

- AWL punch

TECHNICAL SPECIFICATIONS

TECHNICAL DOCUMENT

T1.1

In accordance with American Society of Mechanical Engineers (ASME) B107.11-2002.

Applies to item(s) : 15, 16, 17, 18 and 19.

T1.2

In accordance with American Society of Mechanical Engineers (ASME) B107.16M-1998.

Applies to item(s) : 11, 12, 13 and 14.

T1.3

Shall be in accordance with ASME B107.48 - 2005, Metal Chisels,Punches and Drift Pins.

Applies to item(s) : 22.

T1.4

In accordance with The American Society of Mechanical Engineers B94.2 - 1995, Reamers.

Applies to item(s) : 8, 8.1, 8.2, 8.3, 8.4, 8.5, 8.6, 8.7, 8.8, 8.9, 8.10, 8.11, 8.12, 8.13, 8.14, 8.15, 8.16, 8.17, 8.18, 8.19, 8.20, 8.21, 8.22, 8.23 and 8.24.

ITEM MARKING

T3.1

Mark each item in a permanent and legible manner with manufacturer's part number and name or identifying symbol.

Applies to item(s) : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 and 32.

PACKAGING

T4.1

A total of 5 items specified shall constitute an individual package. The item specified may be packaged in any commercial configuration that equals 5.

(Example: 2 items pack x 2 pack + 1 = 1 package of 5.)

Applies to item(s) : 5 and 23.

T4.2

A total of 6 items specified shall constitute an individual package. The item specified may be packaged in any commercial configuration that equals 6.

(Example: 2 items pack x 3 = 1 package of 6.)

Applies to item(s) : 4 and 19.

T4.3

Shall be in accordance with the latest Edition of ASTM D 3951-98, "Practice for Commercial Packaging" available at www.ASTM.org.

Applies to item(s) : 1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 20, 21, 22, 24, 25, 26, 27, 28, 29, 30, 31 and 32.

PACKING

T5.1

The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 psi, or Edge Crush Test (ECT) 32 Lbs. per Inch Width.

Applies to item(s) : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 and 32.

MARKING

T6.1

All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with the latest version of FED-STD-123, "Marking For Shipment (Civil Agencies)", or marked and bar coded for delivery to military activities in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site:

http://assist.daps.dla.mil/quicksearch/.

PALLETIZATION

Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free.

Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight for shipments to Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (Sharpe).

Pallet Load Configuration: The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Palletized loads shall be secured to the pallet to insure that the load arrives intact.

Stacking Strength: The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength.

Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only.

NOTICE OF REQUIREMENTS FOR SHIPMENT TO EUROPEAN UNION COUNTRIES:

Per Clause D-FSS-468, non-manufactured wood pallets and other non-manufactured wood package material used in shipments destined for ultimate delivery to or through a European Union (EU) country shall comply with the Emergency Measures (2001/219/EC) adopted by the Commission of the European Communities (CEC). Additionally, shipments delivered to DoD distribution facilities or freight consolidation points for eventual delivery to or through EU countries shall comply with DLA PROCLTR 01-15.

Applies to item(s) : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 and 32.

ENVIRONMENTAL FIELDS

TE.6. PRIME

Packaging for this product is compliant with the U.S. Navy "Plastics Removal in the Marine Environment (PRIME)" program which calls for non-plastic packaging, packing, and associated marking requirements. The definition of plastic shall be in accordance with that given in ASTM D883-00, "Standard Terminology Related to Plastics".

Applies to item(s): 2, 3, 5, 6, 7, 8.1, 8.2, 8.3, 8.5, 8.6, 8.7, 8.8, 8.9, 8.10, 8.11, 8.13, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 and 23

TB.1

BIDDERS OFFERING OTHER THAN BRAND NAME ITEMS IDENTIFIED HEREIN MUST FURNISH WITH THEIR BIDS ADEQUATE DESCRIPTIVE LITERATURE SO THAT A DETERMINATION CAN BE MADE AS TO EQUALITY OF THE PRODUCTS OFFERED. IN ORDER FOR THE GOVERNMENT TO MAKE AN "OR EQUAL" DETERMINATION OF THE OFFERED PRODUCT(S), THE FURNISHED INFORMATION MUST DELINEATE EACH APPLICABLE CHARACTERISTIC, UNIT OF MEASURE, AND TEST METHOD OF THE OFFERED PRODUCT(S) DIRECTLY CORRELATED TO EACH OF THE REQUIREMENTS DELINEATED IN THE ITEM PURCHASE DESCRIPTION. FAILURE TO FURNISH THIS INFORMATION/LITERATURE WILL RESULT IN THE BID BEING REJECTED AS NON-RESPONSIVE OR MAY BE CONSIDERED AS UNACCEPTABLE FOR AWARD IN A NEGOTIATED PROCUREMENT (SEE GSAR CLAUSE 552.211-70).

Applies to item(s) : 1, 5, 9, 10, 29, 30 and 31.

image1.png

File details come from the government source that posted it. Updated Nov 14, 2017.