RFI_FBO.docx

ITEM PURCHASE DESCRIPTION

General Services Administration

Request for Information

QSDM-H8-153030-A

Post Date: 04/08/2015 Response Date: 04/20/2015

Sol. Number: QSDM-H8-153030-A Contract Type: Blanket Purchase Agreement Contract Period: 5 Year

The General Services Administration (GSA), Federal Acquisition Service (FAS), Heartland Supply Operations Center (HSOC), would like to offer you the opportunity to review 57 National Stock Numbers anticipated to be solicited in April 2015. The Item Purchase Descriptions (IPDs) can be found in the attached IPD Document. After reviewing the IPDs, we request that you please take a few moments to complete the Response Document concerning this procurement. To accurately complete the Response Document, please complete the fill-ins, relative to your company.

Your comments are important to us as they assist us throughout the acquisition process. You are encouraged to submit any concerns, discrepancies, or comments to help enhance the quality and effectiveness of this procurement. We look forward to reviewing your responses, as they are used in an effort to improve and expand the competitive procurement process.

For further information or questions regarding this Request for Information, please refer to:

POC: Sarah Baer, CO Email: sarah.baer@gsa.gov ATTN: QSDM-H8-153030-A The response date for this Request for Information is April 20, 2015 at 5PM Central. This Request for Information must be returned by the response date via email to the CO listed above. It is not necessary to return the attached IPD document. Please only return the Response Document and Response Document Spreadsheet.

Request for Information Response Document

QSDM-H8-153030-A

Post Date: 04/08/2015 Response Date: 4/20/2015

Thank you for taking the time to respond. Your cooperation and input is greatly appreciated. Please type or print legibly.

Company Name: ____________________________________________________________ Socioeconomic Status: ________________________________________________________ Dealer or Manufacturer: _______________________________________________________ Multiple Award Schedule:______________________________________________________ Point of Contact:_____________________________________________________________ Company Address:___________________________________________________________ DUNS Number: ______________________________________________________________ Phone Number: ______________________________________________________________ Fax Number: ________________________________________________________________ Email Address:_______________________________________________________________ General Questions

1. In order to determine the most appropriate way to solicit the requirement, determine set-aside status, as well as develop evaluation criteria, it is useful to know how many items a prospective vendor intends to quote.

2. Please use the response document spreadsheet to indicate which NSNs you intend to quote.

3. After reviewing the attached NSN List, are any of the items available on your Multiple Award Schedule Contract, and if which items?____________ If the items are not available via MAS contract do you intend on adding them, and if so which items?____________

4. To the best of your knowledge, after reviewing the attached NSN List and corresponding Item Purchase Descriptions, are you aware of any items which cannot meet the requirements of the Trade Agreements Act in accordance with FAR 52.225-5? Please use the response document spreadsheet to indicate which NSNs you believe are noncompliant.

5. It is anticipated that the Delivery after Receipt of Order (DARO) in relation to the procurement will be 14 Days. Do you feel this is a reasonable DARO?_____If not, what do you suggest?_________ _

6. It is anticipated that the Minimum Dollar Order Threshold in relation to the procurement will be pre-established. Due to the low unit price of some items associated with the Blanket Purchase Agreement, it is especially important for contractors to offer a low Minimum Dollar Order Threshold. Please provide your suggestion for Minimum Order Threshold_________________If you are both a small business and a manufacturer of any of the 57 items included in this Request for Information, please provide the item number(s). Please reference FAR 19.502-2(b)(1) The contracting officer shall set aside any acquisition over $150,000 for small business participation when there is a reasonable expectation that: Offers will be obtained from at least two responsible small business concerns offering the products of different small business concerns.3

7. Are you able to label in accordance with MIL-STD 129?

8. Please list any general comments you have regarding this procurement

RESPONSE DOCUMENT SPREADSHEET

ITEM PURCHASE DESCRIPTION QSDM-H8-153030-A

1. 5120-00-227-8103 UI: EA

ADAPTER, SOCKET WRENCH

DESCRIPTION

Type II: Attachments Class 3: Adapter Style A: Socket wrench Square Drive Size: 3/4 inch external and 1 inch internal Overall Length: 2-1/4 inches minimum and 2-7/8 inches maximum Material: Steel Coating: Chrome Features: Manual Tool

See Technical Specifications paragraph(s): TE.6, T1.8, T2.1, T3.1, T4.1 and T6.1.

2. 5120-00-224-1372 UI: EA

BAR, PINCH

DESCRIPTION

Type III: pry bars Class 4: pinch Overall Length: 26 inches Bar Stock Size: 3/4 inch Material: Steel

See Technical Specifications paragraph(s): TE.6, T1.17, T3.1, T4.1 and T6.1.

3. 5120-00-222-3241 UI: EA

CAULKING IRON, WOOD

DESCRIPTION

Type II: Caulking Iron, straight without crease Class A: Narrow.

Blade Width: 2 inches Blade End Thickness: 1/16 inch Overall Length: 5-1/8 inches

See Technical Specifications paragraph(s): TE.6, T1.22, T3.1, T4.1 and T6.1.

4. 5120-00-184-8410 UI: EA

CROWFOOT ATTACHMENT, SOCKET WRENCH

DESCRIPTION

Type II: Crowfoot, open end Class 1: Standard duty Wrenching Size: 1-3/8 inches Square Drive Size: 3/8 inch Overall Length: 2-9/16 inches

See Technical Specifications paragraph(s): T1.13, T2.1, T3.1, T4.1 and T6.1.

5. 5120-00-022-9797 UI: EA

EXTENSION, SOCKET WRENCH

DESCRIPTION

Type II: Attachments Class 2: Extension bar Style B: Flexible Material: Steel Coating: Chrome Features: Manual Tool

EXCEPTION TO SPECIFICATIONS:

Square Drive Size: 3/8 inch both ends Overall Length: 8 inches

See Technical Specifications paragraph(s): T1.8, T2.1, T3.1, T4.1 and T6.1.

6. 5120-00-227-8079 UI: EA

DESCRIPTION

Type II: Attachments Class 2: Bar, extension, solid Square Drive Size: 3/4 inch Overall Length: 16 inches

See Technical Specifications paragraph(s): TE.6, T1.4, T2.1, T3.1, T4.1 and T6.1.

7. 5120-00-227-8074 UI: EA

DESCRIPTION

Type II: Attachments Class 2: Bar, extension, solid Overall Length: 10 inches Square Drive Size: 1/2 inch

8. 5120-00-240-8705 UI: EA

DESCRIPTION

Type II: Attachments Class 2: Bar, extension, solid Square Drive Size: 1/2 inch Overall Length: 20 inches

9. 5120-00-223-9556 UI: EA

EXTRACTOR, STUFFING BOX AND PUMP PACKING

DESCRIPTION

Overall Length: 7 inches Bit Diameter: 7/32 inch Used for extracting semihard packing from stuffing boxes.

Consists of a flexible shaft with a "T" type handle at one end and a screw bit (corkscrew type) at the other end. The bit shall have two or three turns and be hardened/tempered to prevent breaking or deforming.

See Technical Specifications paragraph(s): TE.6, T3.1, T4.1 and T6.1.

10. 5120-00-223-8860 UI: EA

FID

DESCRIPTION

Type I: Hand Size: 7 Overall Length: 18 inches Handle Width: 2 inches Material: Wood Features: Hand tool; concave

See Technical Specifications paragraph(s): TE.6, T1.3, T3.1, T4.1 and T6.1.

11. 5120-00-203-4656 UI: EA

HAMMER, HAND

DESCRIPTION

Overall Length: 15 inches Head Weight: 2-1/2 pounds Handle Material: Hickory Wood Features: Blacksmith's Double Face Sledge

See Technical Specifications paragraph(s): TE.6, T1.18, T3.1, T4.1 and T6.1.

12. 5120-00-240-5364 UI: EA

HANDLE, SOCKET WRENCH

DESCRIPTION

Type 1: Handles Class 2: Ratchet, reversible Style B: Fine action Square Drive Size: 3/8 inch Material: Steel Coating: Chrome

EXCEPTION TO STANDARD:

Overall Length: 5-3/4 inches

13. 5120-00-132-0396 UI: EA

INSERTER AND REMOVER, ELECTRICAL CONTACT

DESCRIPTION

Type III: Combination Installing and removal tool Class 2: Rear release of contacts Composition B: Plastic Contact Size: 20 Military Part Number: MIL-I-81969/39-01

See Technical Specifications paragraph(s): T1.23, T3.1, T4.1 and T6.1.

14. 5120-00-132-5218 UI: EA

DESCRIPTION

Type III: Combination Installing and removal tool Class 1: Front release of contacts Composition B: Plastic.

Military Part Number: MIL-I-81969/16-02

QPL Qualification Required. QPL-81969-17 Dated Nov. 29, 2004

See Technical Specifications paragraph(s): T1.24, T3.1, T4.1 and T6.1.

15. 5120-00-169-3003 UI: AY

INSTALLATION TOOL, FASTENER, HAND

DESCRIPTION

Overall Length (including nose assembly): 12-1/2" Overall Height (in closed position): 5-1/2" Nose Assembly Thread Size: 10-32 UNF Handle Type: Straight Grip, Rubber Coated to reduce slippage Material: Steel

Functional Description: Used for installation of fixed and floating captive screw assemblies.

Huck International/Alcoa Fastening Systems p/n H8603-10 or equal

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

See Technical Specifications paragraph(s): TB.1, T3.1, T4.1 and T6.1.

16. 5120-00-224-7330 UI: EA

JACK, HYDRAULIC, HAND

DESCRIPTION

Consists Of: Pump, Ram and Reservoir Handle Type: Jack Handle Load Capacity: 12 tons Collapsed Height: 9-1/8 inches maximum Extended Height: 16-1/2 inches minimum Pump Type: Single Features: Screw Extension; Self-Contained

A hydraulic hand operated jack with the pump, ram, and reservoir in an integral unit manually operated with a lever. The Jack will safely raise its rated capacity load to its maximum height and maintain that height for at least ten minutes without lowering more than 1/4 inch. A suitable lever to operate the pump shall be furnished. The Jack will be legibly and permanently marked with its rated load capacity.

See Technical Specifications paragraph(s): T3.1, T4.1 and T6.1.

17. 5120-00-188-1790 UI: EA

JACK, HYDRAULIC, HAND

DESCRIPTION

Load Capacity: 30 Tons Minimum Collapsed Height: 11-1/4 inches Maximum Extended Height: 16 inches Minimum Unit Type: Self-Contained Pump Type: Single Features: Low and High Speed Operation; includes a Threaded Connection for a Pressure Gauge

A hydraulic hand operated jack with the pump, ram, and reservoir in an integral unit manually operated with a lever. The Jack will safely raise its rated capacity load to its maximum height and maintain that height for at least ten minutes without lowering more than 1/4 inch. A suitable lever to operate the pump will be furnished. The jack will be legibly and permanently marked with its rated load capacity.

18. 5120-00-087-6415 UI: SE

KEY SET, SOCKET HEAD SCREW

DESCRIPTION

Set Component Quantity: 7 Key Sizes: One (1) each of the following key sizes:

Key Size Flute Count

0.06 6

0.069 4

Handle Type: L-Style Type: Short Series Features: Furnished in a wrap, roll, envelope, or pouch.

See Technical Specifications paragraph(s): T1.20, T2.4, T3.1, T4.2 and T6.1.

19. 5120-00-240-5268 UI: EA

KEY, SOCKET HEAD SCREW

DESCRIPTION

L-Type: Short Series Overall Length: 6-7/32 inches minimum and 6-13/32 inches maximum Long Arm Length: 5-21/32 inches minimum and 5-27/32 inches maximum Short Arm Length: 1-21/32 inches minimum and 1-27/32 inches maximum Wrenching Surface Shape: Hexagon Both Ends External Wrenching Size: 9/16 inch

Coating: Oxide

See Technical Specifications paragraph(s): TE.6, T1.20, T2.1, T3.1, T4.1 and T6.1.

20. 5120-00-224-1416 UI: EA

MALLET, WOOD

DESCRIPTION

Face Diameter: 3-1/2 inches Length, Head: 5-1/2 inches Length, Handle: 14 inches Head Shape: Round Material, Head and Handle: Grade A Hickory or other similar hardwood Features: Mallet shall be coated with clear waterproof sealer

21. 5120-00-042-6577 UI: EA

NOZZLE, CAULKING GUN

DESCRIPTION

Overall Length: 4 inches Shape: Straight Orifice Shape: Round.

Orifice Diameter: 1/16 inch Thread Diameter/Series: 1/2 inch NPT external Material: Plastic Features: Disposable

PRC DeSoto International Part Number 220544 or equal

Brand __________________________________________

22. 5120-00-167-0150 UI: EA

DESCRIPTION

Overall Length: 2-1/2 inches Shape: Conical Orifice Shape: Round Tapered Orifice Diameter: 1/16 inch Thread Diameter/Series: 1/4 inch NPT external Material: Plastic Features: Disposable

PRC Desoto SEMCO part number 220538 (model #252) or equal

Brand __________________________________________

23. 5120-00-223-8846 UI: SE

PINCH-OFF TOOL, TUBING

DESCRIPTION

Tubing Hole Sizes: 1/4, 3/8, and 1/2 inch Overall Length: 3-3/8 inches Length, Pinch-off: 3/4 inch Width: 1-1/8 inches Thickness: 9/16 inch Features: Two mating steel die blocks with clamping screws, two wing nuts

Imperial part number 105-FF or equal.

Brand __________________________________________

24. 5120-00-239-8252 UI: EA

PLIERS

DESCRIPTION

Type II: Double round nose Overall Length: 4-1/2 inches Features: Cushion grip handles

EXCEPTION(S) TO TECHNICAL DOCUMENT:

TABLE 6, Nominal size 4-1/2 inches, under dimension B, delete 3/4 inch and substitute 7/8 inch

See Technical Specifications paragraph(s): TE.6, T1.9, T3.1, T4.1 and T6.1.

25. 5120-00-088-9393 UI: EA

PLIERS, RETAINING RING

DESCRIPTION

Type V: Retaining ring, internal and external (convertible) Style A: straight tip Tip diameter: 0.07 inch Overall Length: 7-7/16 inches

Feature: Comfort grip handles

See Technical Specifications paragraph(s): T1.12, T3.1, T4.1 and T6.1.

26. 5120-00-235-3037 UI: EA

PLIERS, WING LOCK

DESCRIPTION

In accordance with Daniels Manufacturing Corporation Drawing Number: AT35711-ENV

See Technical Specifications paragraph(s): T2.3, T3.1, T4.1 and T6.1.

27. 5120-00-237-6995 UI: EA

PRESS, LEAD SEAL, HAND

DESCRIPTION

Type: Manual, non-reversible Style: Lightweight pocket Overall Length: 5 inches Die Quantity: 2, upper and lower Features: blank faces

United Security Seals Inc. Part Number HC7 Type V

28. 5120-00-221-1150 UI: EA

PUNCH AND DIE, GROMMET INSERTING

DESCRIPTION

Size Designator: 4.

Drop forged steel; designed for spur grommet with integral die.

Diameter of hole when inserted 9/16 inch Grommet Type For Which Designed: Spur.

29. 5120-00-223-1014 UI: EA

PUNCH, PIN

DESCRIPTION

Type II: Punches Class 5: Pin Overall Length: 8 inches Tip/Point Size: 1/8 inch Pin Length: 3-1/2 inches

See Technical Specifications paragraph(s): TE.6, T1.16, T3.1, T4.1 and T6.1.

30. 5120-00-104-0005 UI: SE

SCREWDRIVER SET, CROSS TIP

DESCRIPTION

Type I: Phillips (PH) Class 1: Plain Furnished Items: Case, Roll Or Pouch Component Quantity: 5 Supply Items And Quantities: Contains 1 Ea Phillips Tips Size 1 (3 In. Blade Lg); 2 (1-1/2 In. Blade Lg); 2 (4 In. Blade Lg); 3 (6 In. Blade Lg) And 4 (5-15/16 In. Blade Lg).

See Technical Specifications paragraph(s): T1.14, T3.1, T4.2 and T6.1.

31. 5120-00-103-9743 UI: SE

SCREWDRIVER SET, FLAT TIP

DESCRIPTION

Component Quantity: 5 Material Blade: Steel Material Handle: Plastic Coating Blade: Chrome Features: Handles Shall be all the Same Shape and Uniform within the Set.

Type I: Cabinet, Straight Sides

Type II: General Purpose, Flared Sides

See Technical Specifications paragraph(s): TE.6, T1.11, T2.1, T2.4, T3.1, T4.2 and T6.1.

32. 5120-00-240-8716 UI: EA

SCREWDRIVER, CROSS TIP

DESCRIPTION

Type I: Phillips (PH) Class 1: Plain Tip Size Designation: 1 Blade Length: 3 inches Overall Length: 6 inches minimum and 7 inches maximum Material, Blade: Steel Material, Handle: Plastic

See Technical Specifications paragraph(s): TE.6, T1.14, T2.1, T3.1, T4.1 and T6.1.

33. 5120-00-227-7334 UI: EA

SCREWDRIVER, FLAT TIP

DESCRIPTION

Type I: Cabinet, Straight Sides Tip Thickness: 0.035 inch Tip Width: 7/32 inch Blade Length: 10 inches Overall Length: 13-3/4 inches Material Blade: Steel Material Handle: Plastic Coating Blade: Chrome Features: Cushion Grip

See Technical Specifications paragraph(s): T1.11, T2.1, T3.1, T4.1 and T6.1.

34. 5120-00-180-0706 UI: EA

SCREWDRIVER, JEWELER'S SWIVEL KNOB

DESCRIPTION

Type I: Swivel knob, metal handle body, interchangeable blades Tip Width: .04 inch Handle Length: 2-3/4 inches minimum Material Blade: Steel Material Handle: Metal Features: Knurled Handle; One bit provided with screwdriver

See Technical Specifications paragraph(s): T1.2, T3.1, T4.1 and T6.1.

35. 5120-00-180-0727 UI: EA

DESCRIPTION

Type I: Swivel knob, metal handle body, interchangeable blades Tip Width:.055 inch Handle Length: 2-3/4 inches maximum Material Blade: Steel

Features: Knurled Handle; One bit provided with screwdriver

36. 5120-00-180-0730 UI: EA

DESCRIPTION

Type I: Swivel knob, metal handle body, interchangeable blades Tip Width: .100 inch Handle Length: 2-3/4 in. minimum Material Blade: Steel

Features: One bit provided with screwdriver

37. 5120-00-180-0705 UI: EA

DESCRIPTION

Type I: Swivel knob, metal handle body, interchangeable blades.

Tip Type: Flat Tip Screwdriver Bit Tip Thickness: .004 inch Tip Width: .025 inch Blade Length: 1-13/16 inches Overall Length: 4 inches Material, Blade: Steel Material, Handle: Steel Coating, Blade: Chrome Features: Non-Magnetic, knurled handle

See Technical Specifications paragraph(s): T1.2, T2.1, T3.1, T4.1 and T6.1.

38. 5120-00-224-9326 UI: EA

SHOVEL, HAND

DESCRIPTION

Handle Length: 26 inches minimum 28 inches maximum Blade Length: 11-1/2 inches minimum and 12-1/2 inches maximum Blade Width: 9-1/2 inches minimum and 10-1/4 inches maximum Handle Type: D-Style Size Designator: 2 Digging Implement Style: Square Point Blade Construction Type: Open Back Blade Material: Steel Handle Material: Wood, Ash

EXCEPTION TO PALLETIZATON:

A corrugated unit pack on a larger pallet may be used provided the pallet width (depth) is not less than 40 inches, nor more than 48 inches and does not exceed a height of 53 inches.

39. 5120-00-082-8526 UI: EA

SOCKET, SOCKET WRENCH

DESCRIPTION

Type I: Sockets (12-Point) Class 2: Universal Sockets Square Drive Size: 1/4 inch Wrench Opening: Size: 5/16 inch

See Technical Specifications paragraph(s): T1.5, T2.1, T3.1, T4.1 and T6.1.

40. 5120-00-018-1553 UI: EA

SOCKET, SOCKET WRENCH

DESCRIPTION

Type: I Sockets (12 Point) Class: 2 Universal Sockets Square Drive End: 1/4 inch Wrench Opening: 1/4 inch

41. 5120-00-223-8653 UI: EA

VALVE TOOL, DEFLATOR

DESCRIPTION

Pressure Capacity: 3500 psi, maximum Overall length: 2-1-/6 inches Thread Size: 3/8 inch Outside Diameter: 7/16 inch Consists: body, stem and cap Material: Machined steel or aluminum Features: Knurled surfaces for gripping and proper use, removes valve core into tool and exhausts air through ports.

42. 5120-00-087-1022 UI: KT

WRENCH KIT

DESCRIPTION

Component Quantity: 64 Square Drive Size: 1/4 inch Material: Steel Coating: Chrome Features: Furnished in a well constructed box

AS4283

Type I: Handles Class 2: Ratchet, reversible Style B: Fine action Overall Length: 4-7/16 inches Features: Sealed Head (High Strength), Standard Handle

Type II: Attachments Class 1: Universal joint Overall Length: 1-1/8 inches Features: Friction Ball

Type II: Attachments Class 2: Bar, extension, solid Overall Length: 6 inches Features: Breaker Bar

Type II: Attachments Class 2: Bar, extension, solid Overall Length: Set will consist of one (1) each of the following 4 lengths:

2, 4, 6 and 14 inches Features: Knurled

B107.1 Type I: Sockets, single (6-point) Class 1: Regular length Wrench Opening: Set will consist of one (1) each of the following 10 sizes: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2 and 9/16 inch

Type I: Sockets, single (6-point) Class 2: Long length Wrench Opening: Set will consist of one (1) each of the following 10 sizes: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2 and 9/16 inch

Type II: Sockets (8-point) Wrench Opening: Set will consist of one (1) each of the following 3 sizes: 1/4, 5/16 and 3/8 inch

Type III: Universal sockets (12-point) Wrench Opening: Set will consist of one (1) each of the following 6 sizes: 1/4, 5/16, 3/8, 7/16, 1/2 and 9/16 inch

B107.10 Type I: Handles Class 4: T, sliding Overall Length: 4-1/2 inches

Type I: Handles Class 3: Speeder Overall Length: 16 inches

Type II: Attachments Class 2: Extension bar Style B: Flexible Overall Length: 6 inches

Type II: Attachments Class 3: Adapter Style B: Ratchet Overall Length: 1-3/8 inches

Type II: Attachments Class 3: Adapter Style B: Ratchet Overall Length: 7/8 inch Features: 27/32 inch spinner

B107.26 Type I: flat tip Tip Size: 1/4 inch Tip Thickness: .36 inch Overall Length: 7/8 inch Features: Manual Tool

Type I: flat tip Tip Size: Set will consist of one (1) each of the following 3 sizes: 3/16, 1/4 and 3/8 inch Tip Thickness: .32 inch Overall Length: 2-7/8 inches Square Shank Width: 1/4 inch Features: Manual Tool, Standard

Type II: cross tip (PH) Tip Size: Set will consist of one (1) each of the following 3 sizes: #1 and #2 Standard size and #2 Long size Overall Length: 3-1/16 inches Features: Manual Tool

Specification: None Standard Socket Bit Driver Tip Size: Set will consist of one (1) each of the following 8 sizes: 7/64, 3/32, 9/64, 1/8, 5/32, 3/16, 7/32 and 1/4 inch Overall Length: 6 inches Features: Manual Tool, Hex

Standard Clutch Socket Bit Driver Tip Size: Set will consist of one (1) each of the following 3 sizes: 5/32, 3/16 and 1/4 inch Overall Length: 1-3/8 inches Features: Manual Tool

Carburetor Adjusting Tool Overall Length: 19-3/4 inches Shaft Type: Flexible Features: Manual Tool

Screwdriver Bit (Flat Tip) Blade Size: Set will consist of one (1) each of the following 2 sizes: 7/16 x 1/32 inch and 23/64 x 1/32 inch Features: Recessed Blade Carburetor

Flexible Socket Driver Overall Length: 6-3/4 inches Features: Standard Cable, Standard Handle, Manual Tool

Standard Shank Socket Driver Overall Length: 6 inches Features: Soft grip handle, Manual Tool

See Technical Specifications paragraph(s): T1.4, T1.7, T1.8, T2.1, T3.1, T4.2 and T6.1.

43. 5120-00-148-7917 UI: SE

WRENCH SET, COMBINATION BOX AND OPEN END

DESCRIPTION

Type II: Wrenches, Box (12-Point) Class 4: Combination, Box and Open End Wrench Style A: Regular Length Wrench Openings: The set shall consist of one (1) each of the following 12 components: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and 1 inch both ends Material: Steel

Features: Roll or Wrap

See Technical Specifications paragraph(s): TE.6, T1.5, T2.1, T2.4, T3.1, T4.2 and T6.1.

44. 5120-00-204-1999 UI: SE

WRENCH SET, SOCKET

DESCRIPTION

Component Quantity: 21 Material: Steel Coating: Chrome Features: Metal Box

AS954

Type I: Sockets (12-Point) Class 1: Sockets Style A: Regular Length Square Drive Size: 3/4 inch Wrench Openings: The set shall include one (1) each of the following 14 component sizes: 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-7/16, 1-1/2, 1-9/16, 1-5/8, 1-13/16, 1-7/8 and 2 inch

B107.10 Type I: Handles Class 1: Hinged Square Drive Size: The set shall include one (1) each of the following component size: 3/4 inch Overall Length: 17-3/4 inches minimum and 23 inches maximum

Type I: Handles Class 2: Ratchet, Reversible Square Drive Size: The set shall include one (1) each of the following component size: 3/4 inch

Type I: Handles Class 4: T, Sliding Square Drive Size: The set shall include one (1) each of the following component size: 3/4 inch Overall Length: 17 inches minimum and 20 inches maximum

AS4283

Type II: Attachments Class 1: Universal Joint Square Drive Size: The set shall include one (1) each of the following component size: 3/4 Overall Length: 4-1/4 inches maximum

Type II: Attachments Class 2: Extension bar Style A: Solid Square Drive Size: 3/4 inch Overall Length: The set shall include one (1) each of the following 3 component lengths: 5, 8 and 16 inches

See Technical Specifications paragraph(s): TE.6, T1.4, T1.5, T1.8, T2.1, T2.4, T3.1, T4.2 and T6.1.

45. 5120-00-081-2309 UI: SE

WRENCH SET, SOCKET

DESCRIPTION

Component Quantity: 27 Material: Steel Coating: Chrome Features: Metal Box or Impact Resistant Plastic Case

AS954

Type I: Sockets (12-Point) Class 1: Sockets Style A: Regular Length Square Drive Size: 1 inch Wrench Openings: The set shall include one (1) each of the following 22 component sizes: 1-1/2, 1-5/8, 1-11/16, 1-3/4, 1-13/16, 1-7/8, 1-15/16, 2, 2-1/8, 2-3/16, 2-1/4, 2-5/16, 2-3/8, 2-7/16, 2-1/2, 2-9/16, 2-5/8, 2-3/4, 2-13/16, 2-15/16, 3 and 3-1/8 inches

B107.10 Type I: Handles Class 1: Hinged Square Drive Size: The set shall include one (1) each of the following component size: 1 inch Overall Length: 22 inches minimum

Type I: Handles Class 2: Ratchet, Reversible Square Drive Size: The set shall include one (1) each of the following component size: 1 inch Overall Length: 20 inches minimum

Type I: Handles Class 4: T, sliding Square Drive Size: The set shall include one (1) each of the following component size: 1 inch Overall Length: 20 inch minimum

Type II: Attachments Class 2: Extension Bar Style A: Solid Square Drive Size: 1 inch Overall Length: The set shall include one (1) each of the following 2 component lengths: 8 and 17 inches

See Technical Specifications paragraph(s): TE.6, T1.5, T1.8, T2.1, T2.4, T3.1, T4.2 and T6.1.

46. 5120-00-103-9800 UI: SE

SOCKET SET, SOCKET WRENCH

DESCRIPTION

Component Quantity: 38

Standard: AS955 Type I: Metric Sockets Class 1: Metric Sockets Style A: Regular length Square Drive Size: 1/2 inch Wrench Openings: Set consists of one (1) each of the following 23 sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm, and 32mm.

Material: Steel Coating: Chrome

Type I: Metric Sockets Class 1: Metric Sockets Style C: Long length Square Drive Size: 1/2 inch Wrench Openings: Set consists of one (1) each of the following 5 sizes: 14mm, 17mm, 19mm, 22mm, and 27mm Material: Steel Coating: Chrome

Specification: AS954 Type I: Sockets (12 Point) Class 1: Sockets Style A: Regular length Square Drive Size: 1/2 inch Wrench Opening: 13/16 inch Material: Steel Coating: Chrome

Specification: AS4283 Type I: Handles Class 1: Hinged Handles Style B: Fine Action Square Drive Size: 1/2 inch Overall Length: 14 inches minimum Material: Steel Coating: Chrome

Type I: Handles Class 2: Ratchet, reversible Style B: Fine Action Square Drive Size: 1/2 inch Material: Steel Coating: Chrome

Type I: Handle Class 3: Speeder, Brace type Square Drive Size: 1/2 inch Material: Steel Coating: Chrome

Type II: Attachments:

Class 1: Universal joint Square Drive Size: 1/2 inch Material: Steel Coating: Chrome

Type II: Attachment Class 2: Bar, extension, solid Square Drive Size: 1/2 inch Overall Length: Set consists of one (1) each of the following 3 lengths: 1 at 2 inches to 3 inches, 1 at 5 inches, and 1 at 10 inches.

Material: Steel Coating: Chrome

Specification: B107.10M Type I: Handles Class 4: T, sliding Square Drive Size: 1/2 inch Material: Steel Coating: Chrome

Type II: Attachments Class 3: Adapter Style B: Ratchet Square Drive Size: 1/2 inch Material: Steel

Features: An impact resistant plastic or metal box

See Technical Specifications paragraph(s): T1.4, T1.5, T1.6, T1.8, T2.1, T2.5, T3.1, T4.2 and T6.1.

47. 5120-00-228-9518 UI: EA

WRENCH, BOX AND OPEN END, COMBINATION

DESCRIPTION

Type II: Wrenches, Box (12-Point) Class 4: Combination, Box and Open End Wrench Style A: Regular Length Material: Steel Coating: Chrome

EXCEPTION TO SPECIFICATION for Wrench Openings and Length:

Wrench Openings: 1-5/16 inches both ends Overall Length: 18 inches

48. 5120-00-187-7126 UI: EA

WRENCH, OPEN END

DESCRIPTION

Type I: Engineer's wrench, 15 deg angle Class 1: Regular length Wrench Openings: 9/16 inch small end and 5/8 inch large end Overall Length: 6 inches minimum and 8 inches maximum

See Technical Specifications paragraph(s): TE.6, T1.15, T2.1, T3.1, T4.1 and T6.1.

49. 5120-00-203-4799 UI: EA

WRENCH, OPEN END

DESCRIPTION

Wrench Opening: 1-7/8 inches Overall Length: 8-1/2 inches

See Technical Specifications paragraph(s): TE.6, T1.1, T2.1, T3.1, T4.1 and T6.1.

50. 5120-00-018-1519 UI: EA

WRENCH, SPANNER

DESCRIPTION

In accordance with the Naval Ordinance Systems Command drawing 810-4444647, dated 13 Dec 71.

Material: Aluminum Alloy For Couplings Type: Rocker Lug, Slotted or Pin Lug Fire Hose Couplings Coupling Sizes: 1-1/2 inches to 3-1/2 inches

See Technical Specifications paragraph(s): TE.6, T1.21, T2.2, T3.1, T4.1 and T6.1.

51. 5120-00-117-3428 UI: EA

WRENCH, TORQUE

DESCRIPTION

Type I: Indicating Class C: rigid housing Style 3: scale with memory indicator Square Drive Size: 1/4 inch Increment Graduation: 1 inch-pound Torque Range: 75 inch-pounds

Features: Memory indicator, protective compartmented enclosed carrying case

See Technical Specifications paragraph(s): T1.10, T2.1, T3.1, T4.1 and T6.1.

52. 5120-00-132-5808 UI: EA

DESCRIPTION

Type III: Combination Installing and removal tool Class 2: Rear release of contacts Composition B: Plastic Contact Size: 22 Military Part Number: MIL-I-81969/16-04

See Technical Specifications paragraph(s): TE.6, T1.23, T3.1, T4.1 and T6.1.

53. 5120-00-056-3237 UI: SE

SPATULA SET

DESCRIPTION

Consists of three (3) spatulas with two (2) working ends. The set shall be furnished in a case.

Material: Fiberglass filled nylon

Length and width are as follows in inches:

(1) Length 7-1/4, widths 3/8 and 9/32

(2) Length 7-1/4, widths 1/16 and 9/32

(3) Length 7-1/4, widths 3/8 and 1/2

See Technical Specifications paragraph(s): T2.4, T3.1, T4.2 and T6.1.

54. 5120-00-167-0153 UI: EA

DESCRIPTION

Overall Length: 6 inches Bend Angle: 30 degrees Thread Diameter: 1/2 inch NPT External Orifice Diameter: 1/8 inch Orifice Shape: Round Shape: Bent Material: Plastic

55. 5120-00-224-9456 UI: EA

PULLER, FUSE

DESCRIPTION

Amp Rating: 0 to 100A; Clearly Marked Voltage Rating: 250V or 600V Length: 7-1/2 inches Handle: Notched to provide safety, and must have no-slip grip Insulated: Fully, High Dielectric Features: Double Ended Tong Type; Molded Finger Grip Body; Used for 1/2 inch to 1-1/4 inch diameter cartridge-type fuses

Ideal Industries part number 34-002 or equal

Brand __________________________________________

See Technical Specifications paragraph(s): TE.6, TB.1, T3.1, T4.1 and T6.1.

56. 5120-00-234-8910 UI: EA

SCREWDRIVER, FLAT TIP

DESCRIPTION

Type II: General Purpose, Flared Sides Tip Thickness: 3/64 inch Tip Width: 5/16 inch Blade Length: 6 inches Overall Length: 10 inches minimum and 11-1/2 inches maximum Material, Blade: Steel Material, Handle: Plastic Coating, Blade: Chrome

See Technical Specifications paragraph(s): TE.6, T1.11, T2.1, T3.1, T4.1 and T6.1.

57. 5120-00-240-5328 UI: EA

WRENCH, ADJUSTABLE

DESCRIPTION

Type I: standard openings Jaw Capacity: 0 inch minimum and 61/64 inch maximum Overall Length: 8 inches

See Technical Specifications paragraph(s): TE.6, T1.19, T2.1, T3.1, T4.1 and T6.1.

TECHNICAL SPECIFICATIONS

TECHNICAL DOCUMENT

T1.1

In accordance with Commercial Item Description A-A-1353A dated February 7, 2002.

Applies to item(s) : 49.

T1.2

In accordance with Commercial Item Description A-A-3152A dated July 30, 2002.

Applies to item(s) : 34, 35, 36 and 37.

T1.3

In accordance with Commercial Item Description (CID) A-A-52129, dated June 30, 1993.

Applies to item(s) : 10.

T1.4

Shall be In Accordance With SAE Aerospace Standard: AS4283B - Handles and Attachments for Hand Socket Wrenches, dated December 2011

Applies to item(s) : 6, 7, 8, 12, 42, 44 and 46.

T1.5

In accordance with Society of Automotive Engineers Aerospace Standard AS954G, Wrenches, Hand Twelve Point High Strength, Thin Wall, dated 2011

Exception to AS954G dated 2011:

Exception: Paragraph 3.7 Test Proof Loads, the following requirement shall be incorporated:

Torque shall be applied with a suitable torque producing machine. Torque shall be applied at a speed of 15 deg/min to 30deg/min until proof load value is achieved; test load shall be held for 10 seconds, then torque shall be released. This proof load test shall be performed in the clockwise and counter clockwise direction. .

Applies to item(s) : 39, 40, 43, 44, 45, 46 and 47.

T1.6

In accordance with Society of Automotive Engineers Aerospace (SAE) Standard AS955, Metric Sockets, Wrenches, Hand Twelve Point, High Strength, Thin Wall dated 2012.

Applies to item(s) : 46.

T1.7

In accordance with American Society of Mechanical Engineers (ASME) B107.1-2002.

Applies to item(s) : 42.

T1.8

In accordance with American Society of Mechanical Engineers(ASME) B107.10 - 2005

Applies to item(s) : 1, 5, 42, 44, 45 and 46.

T1.9

In accordance with American Society of Mechanical Engineers (ASME) B107.13 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37.

Applies to item(s) : 24.

T1.10

TYPE I and III Torque Wrenches Shall be in accordance with American Society of Mechanical Engineers (ASME) B107.14 as contained in ASME B107.300-2010; this document incorporates and includes the revisions of primary standard B107.14, B107.28, and B107.29.

TYPE II Torque Wrenches Shall be in accordance with the SAE International Aerospace Standard AS 28431; Aerospace Hand Torque Wrenches (Mechanical, Impulse)

Applies to item(s) : 51.

T1.11

In accordance with American Society of Mechanical Engineers (ASME) B107.15 as contained in ASME B107.600-2008; this document incorporates and includes the revisions of primary standard B107.15, B107.26, B107.30, and B107.31

Applies to item(s) : 31, 33 and 56.

T1.12

In accordance with American Society of Mechanical Engineers (ASME) B107.19 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37.

Applies to item(s) : 25.

T1.13

In accordance with American Society of Mechanical Engineers (ASME) B107.21 as contained in ASME B107.100-2010; this document incorporates and includes the revisions of primary standard B107.6, B107.8, B107.9, B107.21, B107.39, B107.40, and B107.66.

Applies to item(s) : 4.

T1.14

In accordance with American Society of Mechanical Engineers (ASME) B107.15 as contained in ASME B107.600-2008; this document incorporates and includes the revisions of primary standard B107.15, B107.26, B107.30, and B107.31

Applies to item(s) : 30 and 32.

T1.15

In accordance with American Society of Mechanical Engineers (ASME) B107.39 as contained in ASME B107.100-2010; this document incorporates and includes the revisions of primary standard B107.6, B107.8, B107.9, B107.21, B107.39, B107.40, and B107.66.

Applies to item(s) : 48.

T1.16

In accordance with American Society of Mechanical Engineers (ASME) B107.48 as contained in ASME B107.410-2008; this document incorporates and includes the revisions of primary standard B107.43, B107.44, B107.46, B107.48, B107.49, B107.50, B107.52 and B107.59

Applies to item(s) : 29.

T1.17

In accordance with American Society of Mechanical Engineers (ASME) B107.52 as contained in ASME B107.410-2008; this document incorporates and includes the revisions of primary standard B107.43, B107.44, B107.46, B107.48, B107.49, B107.50, B107.52 and B107.59

Applies to item(s) : 2.

T1.18

In accordance with American Society of Mechanical Engineers (ASME) B107.54 as contained in ASME B107.400-2008; this document incorporates and includes the revisions of primary standard B107.41, B107.42, B107.53, B107.54, B107.56, and B107.58

Applies to item(s) : 11.

T1.19

In accordance with American Society of Mechanical Engineers (ASME) B107.8 - 2003 stand alone standard or as contained in ASME B107.100-2010.

Applies to item(s) : 57.

T1.20

In accordance with ASME B18.3-2003, Socket Cap, Shoulder and Set Screws, Hex and Spline Keys.

Applies to item(s) : 18 and 19.

T1.21 Applies to item(s) : 50.

T1.22

This specification covers forged hardened steel calking irons designed for ship calking and making purposes. GGG-I-671

Applies to item(s) : 3.

T1.23

In accordance with Military Specification MIL-I-81969B

Please check to see if QPL QUALIFICATION REQUIRED: QPL transformed to QPD, December 9, 2008. Please go to http://quicksearch.dla.mil/, and follow the steps below to view the QPD.

1. Input "81969" in Document Number field and click "Submit"

2. Click on QPL-81969 under "Document ID" column.

3. Click on "Qualification" in the "Overview" section to view the QPD.

Applies to item(s) : 13 and 52.

T1.24

In accordance with Military Specification MIL-I-81969B, dated August 20, 1982 and Specification Sheet MIL-I-81969/16A, dated January 11, 1979.

Applies to item(s) : 14.

EXCEPTION(S) TO TECHNICAL DOCUMENT

T2.1

Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

Applies to item(s) : 1, 4, 5, 6, 7, 8, 12, 19, 31, 32, 33, 37, 39, 40, 42, 43, 44, 45, 46, 47, 48, 49, 51, 56 and 57.

T2.2

Mark each tool in a permanent and legible manner with drawing number, manufacturer's name or identifying symbol, and country of origin

Applies to item(s) : 50.

T2.3

In lieu of marking(s) specified on drawing(s), mark each tool in a permanent and legible manner with manufacturer's part number and name or identifying symbol.

Applies to item(s) : 26.

T2.4

Tools in the set shall be manufactured by only one manufacturer unless otherwise specified.

Applies to item(s) : 18, 31, 43, 44, 45 and 53.

T2.5

Tools in the set shall be manufactured by by no more than two manufacturers unless otherwise specified.

Applies to item(s) : 46.

ITEM MARKING

T3.1

Each item Shall Be Marked in a Permanent and Legible Manner with:

1) Manufacturer's Part Number

2) Manufacturer's Name or Identifying Symbol, and

3) Country of Origin

Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN). Requisition Number and TCN are found on the Purchase Order.

Applies to item(s) : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56 and 57.

PACKAGING

T4.1

One (1) item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage.

Applies to item(s) : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 47, 48, 49, 50, 51, 52, 54, 55, 56 and 57.

T4.2

One (1) set shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling and storage.

Applies to item(s) : 18, 30, 31, 42, 43, 44, 45, 46 and 53.

MARKING

T6.1

All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to the GSA DEPOT and MILITARY ACTIVITIES shall be in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site:

http://assist.daps.dla.mil/quicksearch/

NOTICE: All Pallets transported / Shipped to the GSA Depot MUST be HEAT TREATED and marked IAW IIPC

Palletization: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp Location). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it.

Stacking: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel.

Materials: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein.

Unitization: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified.

Unitization of pallet load: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel.

Notice of special requirements for shipment to all countries, GSA Depots and DLA Consolidated Shipping Points that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published Guidelines for Regulating Wood Packaging Material in International Trade. Countries endorsing the IPPC Guidelines are found at the website given below. General Services Administration Acquisition Manual (GSAM) Clause 552.211-89 requires non-manufactured wood pallets and other non-manufactured wood packaging material used to pack items for delivery to or through IPPC countries be marked and properly treated in accordance with IPPC guidelines. Pallets and packing material shipped to FAS distribution facilities designated for possible delivery to the countries endorsing the IPPC Guidelines will comply with DLAD 47.305-1, and MIL-STD-2073-1.

http://www.aphis.usda.gov/import_export/plants/plant_exports/wpm/country/index.shtml

UNIT PACKAGES:

The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 psi, or Edge Crush Test (ECT) 32 Lbs. per Inch Width.

Applies to item(s) : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56 and 57.

ENVIRONMENTAL FIELDS

TE.6. PRIME

Packaging and packing requirements in this item purchase description are unique at the request of the U.S. Navy Supply Systems Command. This item is included in the Navy s PLASTICS REMOVAL IN MARINE ENVIRONMENT (PRIME) PROGRAM under the U.S. Marine Plastic Pollution Research and Control Act of 1987 (MPPRCA) and the International Convention for the Prevention of Pollution from Ships Treaty (MARPOL) Annex V. Items in the PRIME program prohibit the use of plastic packaging, void fill other than Kraft paper, and tape when plastics are defined in ASTM D883-00, Standard Terminology Related to Plastics . The package shall be the same as that normally provided by the supplier and the pack shall comply with the rules and regulations applicable to the mode of transportation except that the use of plastic packing materials, void fill other than Kraft paper, and pressure sensitive tapes are prohibited.

Applies to item(s): 1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 19, 24, 27, 28, 29, 31, 32, 38, 43, 44, 45, 48, 49, 50, 52, 55, 56 and 57

TB.1

Brand Name or Equal Submissions:

FAR Provisions 52.211-6, Brand Name or Equal Applies

Applies to item(s) : 15, 21, 22, 23 and 55.

Printed on: 4/8/2015, 7:33:07 AM Page 45 image2.png image1.png image3.png oleObject1.bin