QSDM-A0-120483-D IPD.doc

DOC document 101 KB Posted Sep 6, 2012

Attached to: PIN Market Survey QSDM-A0-120483-D
Solicitation number: QSDM-A0-120483-D
Issued by: GSA Federal Acquisition Service

About this file

From the source

Item Purchase Descriptions

View the file

Other files

File	Type	Posted
Pin Market Survey QSDM-A0-120483-D.docx	DOCX document	Sep 6, 2012

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

ITEM PURCHASE DESCRIPTION

General Services Administration

ITEM PURCHASE DESCRIPTION QSDM-A0-120483-D

1. 5180-01-516-3218 UI: KT

TOOL KIT, WEAPONS CLEANING

DESCRIPTION

The Military Tool Kit, 7.62MM Rifle, shall consist of the following components in a sheath:

1. Multi-Purpose Tool

The multi-purpose tool shall be fabricated of stainless steel with a black finish. The stainless steel used shall have such properties as to provide for tool capability to withstand abrasive wear, maintain the original shape of its overall structure and components and retain a keen edge on all cutting blades for the entire service-life of the tool.

The multi-purpose tool shall contain the following components: half serrated knife blade with modified drop point, 4-prong front weapon sight adjustment tool, 2 minimum length carbon scraper, can opener, bottle opener and a lanyard eye. It shall have three flat tip screwdrivers, screw sizes 0-1; 4-5; 6-7, one cross tip Phillips #2 screwdriver with a minimum length of 1-1/2 , and a ruler with standard and metric measurements; the standard ruler shall be 3.00" length in 1/8" increments; the metric ruler shall be 8 cm length in 2 mm increments. All components shall have independent tool rotation to prevent the tools from clumping together. The components shall fold into handles, and when opened, shall lock in the open position and be released by lock release mechanisms on the outside of the handles.

The pliers of the multi-purpose tool shall be needle nose with combination jaws. The jaws shall have straight gripping surfaces at the outer end of the jaws, scored either straight or diamond pointed suitable for gripping flat surfaces, and curved gripping jaws with pointed teeth at the center of the jaws, suitable for gripping round surfaces. Wire cutters consisting of replaceable indexable triangular shaped carbide insert cutter bits shall be located below the curved gripping jaws. A crimper shall be located below the wire cutters. The pliers shall be primarily contained by the multi-purpose tool handles while in the closed configuration.

Multi-purpose tool dimensions: Overall Length: 5" +/- 1/2" Closed

2. LED Flashlight with Red Bulb

The flashlight shall have a red LED bulb powered by a single AA battery, anodized aluminum case with black finish, pocket clip, lanyard hole and a knurled twist on/off switch at the tail end of the housing which has a steady-on mode, intermittent mode for signaling and a lock-off mode to protect against accidental turn-on. Dimensions: 3/4 +/- 1/16" diameter, 3-3/8 +/- 1/16" length

3. Weapons Cleaning System designed for all 7.62MM weapons. Also cleans and maintains .303, .308 and .30 caliber rifle systems. All components listed below shall be compatible with each other.

1. 30" Flexible Cable

2. 8" Flexible Cable

3. Short A/P Receiver Brush

4. Scraper

5. T-handle Bar

6. Large Obstruction Remover/T-handle Base

7. .30 Caliber Slotted Tip

8. Straight Locking Lug Pick

9. Female Rod Handle

10. NATO Adapter

11. Bore Reflector/Flag Safety

12. Nylon End Brush

13. .30 Caliber Brush

14. .45 Caliber Brush

15. Panoply Patches (10)

16. Lubricant (CLP)

17. Mohair Lens Brush

The multi-purpose tool, flashlight and weapons cleaning system components shall be furnished in a rectangular shaped black ballistic nylon sheath with two MOLLE straps on the back of the sheath. The maximum dimensions of the sheath when closed and fully loaded are 4-3/4 width, 8-3/4 height and 4 depth.

The sheath contains two outside pockets covered by a flap which hold the multi-purpose tool and the flashlight. A large tooth zipper on three sides of the sheath opens the sheath to expose the weapons cleaning system. The weapons cleaning components are held inside the sheath in either pockets, elastic holders or a foam panel with a cut-out or slot for each piece. The foam panel is permanently attached to the inside of the sheath

Gerber part number 22-01101 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

Table of product attributes included? ( Y / N ) ___________

See Technical Specifications paragraph(s): TB.1, T3.1, T4.1 and T6.1.

2. 5180-01-516-3219 UI: KT

M-4/M-16 MILITARTY TOOL KIT

DESCRIPTION

The Military Tool Kit, M-4/M-16 Rifle, shall consist of the following components in a sheath:

1. Multi-Purpose Tool

Multi-purpose tool dimensions: Overall Length: 5" +/- 1/2" Closed

2. LED Flashlight with Red Bulb

Dimensions: 3/4 +/- 1/16" diameter, 3-3/8 +/- 1/16" length

3. Weapons Cleaning System designed for M-4 and M-16 weapons. Cleans and maintains all variants of the M-16 rifle, all 5.56MM, and all .223 caliber full and semi-automatic rifles.

All components listed below shall be compatable with each other.

COMPONENT NO.

DESCRIPTION

8" Flexible Cable

30" Flexible Cable

Short A/P Brush

Brass Scraper

T-handle Bar

T-handle Stud

5.56MM Slotted Tip

Straight Locking Lug Pick

Female Rod Handle

Male Rod Handle

NATO Adapter

5.56MM Obstruction Remover/T-handle Base

Bore Reflector/Flag Safety

Nylon End Brush

5.56MM Bore Brush

.35 Caliber Brush

M-16 Patches (10)

Lubricant (CLP)

Cotton Swabs

Lens Cleaner .5oz.

Lens Tissues

Mohair Lens Brush

Gerber part number 22-01100 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

Table of product attributes included? ( Y / N ) ___________

See Technical Specifications paragraph(s): TB.1, T3.1, T4.1 and T6.1.

3. 5180-01-516-3220 UI: KT

TOOL KIT, WEAPONS CLEANING

DESCRIPTION

The Military Tool Kit, Pistol/Sub-Gun, shall consist of the following components in a sheath:

1. Multi-Purpose Tool

The pliers of the multi-purpose tool shall be needle nose with combination jaws. The jaws shall have straight gripping surfaces at the outer end of the jaws, scored either straight or diamond pointed suitable for gripping flat surfaces, and curved gripping jaws with pointed teeth at the center of the jaws, suitable for gripping round surfaces. Wire cutters consisting of replaceable indexable triangular shaped carbide insert cutter bits, shall be located below the curved gripping jaws. A crimper shall be located below the wire cutters. The pliers shall be primarily contained by the multi-purpose tool handles while in the closed configuration.

Multi-purpose tool dimensions: Overall Length: 5" +/- 1/2" Closed

2. LED Flashlight with Red Bulb

Dimensions: 3/4 +/- 1/16" diameter, 3-3/8 +/- 1/16" length

3. Weapons Cleaning System designed for military pistols and subguns 9MM through .45 calibers.

All components listed below shall be compatable with each other.

COMPONENT NO.

DESCRIPTION

8" Flexible Cable

Short A/P Receiver Brush

Female Rod Handle

Pistol Obstruction Remover/T-handle Base

NATO Adapter

.30 Caliber Slotted Tip

Bore Reflector/Flag Safety

Nylon End Brush

.38 Caliber Nylon Brush

10.

.38 Caliber Brush

11.

Panoply Patches (10)

12.

Lubricant (CLP)

13.

Blackened Brass Scraper

14.

Straight Locking Lug Pick

Gerber part number 22-01102 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

Table of product attributes included? ( Y / N ) ___________

See Technical Specifications paragraph(s): TB.1, T3.1, T4.1 and T6.1.

4. 5180-01-516-3222 UI: KT

TOOL KIT, WEAPONS CLEANING

DESCRIPTION

The Military Tool Kit, Combat Shotgun, shall consist of the following components in a sheath:

1. Multi-Purpose Tool

Multi-purpose tool dimensions: Overall Length: 5" +/- 1/2" Closed

2. LED Flashlight with Red Bulb

Dimensions: 3/4 +/- 1/16" diameter, 3-3/8 +/- 1/16" length

3. Weapons Cleaning System designed for 10/12 gauge military shotguns.

All components listed below shall be compatable with each other.

COMPONENT NO.

DESCRIPTION

30" Flexible Cable

Short A/P Receiver Brush

T-handle Bar

Shotgun Slotted Tip

Female Rod Handle

Male Rod Handle

NATO Adapter

Large Obstruction Remover/T-handle Base

3/4 Large Patch Saver

10.

Bore Reflector/Flag Safety

11.

.40 Caliber Brush (Tubed)

12.

12/10 Gauge Brush (Tubed)

13.

Panoply Patches (10)

14.

Lubricant (CLP)

Gerber part number 22-01103 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

Table of product attributes included? ( Y / N ) ___________

See Technical Specifications paragraph(s): TB.1, T3.1, T4.1 and T6.1.

5. 5180-01-516-3224 UI: KT

TOOL KIT, WEAPONS CLEANING

DESCRIPTION

The Military Tool Kit, 50 CAL., shall consist of the following components in a sheath:

1. Multi-Purpose Tool

Multi-purpose tool dimensions: Overall Length: 5" +/- 1/2" Closed

2. LED Flashlight with Red Bulb

Dimensions: 3/4 +/- 1/16" diameter, 3-3/8 +/- 1/16" length

3. Weapons Cleaning System designed for 50 caliber weapons.

All components listed below shall be compatable with each other.

COMPONENT NO.

DESCRIPTION

40" Cable

8" Cable

Short A/P Brush

Brass Scraper

Female Rod Handle

12 Gauge Brush

58 Cal. Brush

Panoply Patches

CLP Breakfree

10.

50 Cal. Slotted Tip

11.

50 Cal. Obstruction Remover

12.

50 Cal. Bristle Holder

13.

Bore Reflector

Gerber part number 22-01104 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

Table of product attributes included? ( Y / N ) ___________

See Technical Specifications paragraph(s): TB.1, T3.1, T4.1 and T6.1.

6. 5180-01-516-3225 UI: KT

TOOL KIT, WEAPONS CLEANING:

DESCRIPTION

The Law Enforcement Tool Kit, Deluxe, shall consist of the following components in a sheath:

1. Multi-Purpose Tool

Multi-purpose tool dimensions: Overall Length: 5" +/- 1/2" Closed

2. LED Flashlight with Red Bulb

Dimensions: 3/4 +/- 1/16" diameter, 3-3/8 +/- 1/16" length

3. Weapons Cleaning System designed for military and law enforcement pistols, sub-guns, rifles and shotguns. Cleans and maintains pistols and sub-guns 9MM through .45 calibers, 5.56MM and 7.62MM rifles, and 12 gauge shotguns.

All components listed below shall be compatable with each other.

COMPONENT NO.

DESCRIPTION

.30 Caliber Slotted Tip

Female Rod Handle

Nylon End Brush

Short A/P Receiver Brush

Straight Locking Lug Pick

Pistol T-handle Base/Obstruction Remover

.38 Caliber Brush

.45 Caliber Brush

.30 Caliber Brush

10.

.40 Caliber Brush

11.

.22 Caliber Brush

12.

12/10 Gauge Brush (Tubed)

13.

3" All-Caliber Patches (10)

14.

.22 Caliber Slotted Tip

15.

T-handle Bar

16.

.22 Caliber Obstruction Remover/T-handle Base

17.

NATO Adapter

18.

Solvent

19.

Bore Reflector/Flag Safety

20.

Brass Scraper

21.

.30 Caliber Obstruction Remover/T-handle Base

22.

30" Flexible Cable

23.

12" Flexible Cable

24.

8" Flexible Cable w/ .30 Cal. Tip

25.

3/4 Large Patch

26.

Pin Punch

27.

Shotgun Brush Adapter

28.

Male Rod Handle

29.

Shotgun Slotted Tip

30.

Thread Connector

Gerber part number 22-01105 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

Table of product attributes included? ( Y / N ) ___________

See Technical Specifications paragraph(s): TB.1, T3.1, T4.1 and T6.1.

7. 5180-01-516-3227 UI: KT

TOOL KIT, WEAPONS CLEANING

DESCRIPTION

The Law Enforcement Tool Kit, Pistol/Sub-Gun, shall consist of the following components in a sheath:

1. Multi-Purpose Tool

Multi-purpose tool dimensions: Overall Length: 5" +/- 1/2" Closed

2. LED Flashlight with Red Bulb

Dimensions: 3/4 +/- 1/16" diameter, 3-3/8 +/- 1/16" length

3. Weapons Cleaning System designed for military and law enforcement pistols and sub-guns. Cleans and maintains pistols and sub-guns 9MM, .40 and .45 caliber.

All components listed below shall be compatable with each other.

COMPONENT NO.

DESCRIPTION

Solvent

Bore Reflector/Flag Safety

Short A/P Receiver Brush

Female Rod Handle

Pistol Obstruction Remover/T-handle Base

NATO Adapter

.30 Caliber Slotted Tip

Pin Punch

Nylon End Brush

.45 Caliber Nylon Brush

.38 Caliber Brush

Panoply Patches (10)

8" Flexible Cable w/ .30 Cal. Tip

Brass Scraper

Straight Locking Lug Pick

12" Flexible Cable

20" Flexible Cable

Gerber part number 22-01106 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

Table of product attributes included? ( Y / N ) ___________

See Technical Specifications paragraph(s): TB.1, T3.1, T4.1 and T6.1.

8. 5180-01-516-3229 UI: KT

TOOL KIT, MINE PROBE

DESCRIPTION

Contains: multi-tool with blasting cap crimper; LED flashlight with white bulb; 3-piece titanium probe and handle; 3 plastic delrin tips and 3 titanium tips; furnished in a black ballistic sheath.

Gerber part number 05982 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

Table of product attributes included? ( Y / N ) ___________

See Technical Specifications paragraph(s): TB.1, T3.1, T4.1 and T6.1.

TECHNICAL SPECIFICATIONS

ITEM MARKING

T3.1 Each item Shall Be Marked in a Permanent and Legible Manner with:

1) Manufacturer's Part Number

2) Manufacturer's Name or Identifying Symbol, and

3) Country of Origin

Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN). Requisition Number and TCN are found on the Purchase Order.

Applies to item(s) : 1, 2, 3, 4, 5, 6, 7 and 8.

PACKAGING

T4.1 One (1) item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage.

Applies to item(s) : 1, 2, 3, 4, 5, 6, 7 and 8.

MARKING

T6.1 All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to the GSA DEPOT and MILITARY ACTIVITIES shall be in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site:

http://assist.daps.dla.mil/quicksearch/

NOTICE: All Pallets transported / Shipped to the GSA Depot MUST be HEAT TREATED and marked IAW IIPC

Palletization: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp Location). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it.

Stacking: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel.

Materials: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein.

Unitization: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified.

Unitization of pallet load: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel.

Notice of special requirements for shipment to all countries, GSA Depots and DLA Consolidated Shipping Points that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published Guidelines for Regulating Wood Packaging Material in International Trade. Countries endorsing the IPPC Guidelines are found at the website given below. General Services Administration Acquisition Manual (GSAM) Clause 552.211-89 requires non-manufactured wood pallets and other non-manufactured wood packaging material used to pack items for delivery to or through IPPC countries be marked and properly treated in accordance with IPPC guidelines. Pallets and packing material shipped to FAS distribution facilities designated for possible delivery to the countries endorsing the IPPC Guidelines will comply with DLAD 47.305-1, and MIL-STD-2073-1.

http://www.aphis.usda.gov/import_export/plants/plant_exports/wpm/country/index.shtml

UNIT PACKAGES:

The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 psi, or Edge Crush Test (ECT) 32 Lbs. per Inch Width.

Applies to item(s) : 1, 2, 3, 4, 5, 6, 7 and 8.

TB.1

Vendors offering other than brand name items identified herein, MUST furnish with their quotes/offers adequate descriptive literature so that a determination can be made as to equality of the products offered; Including but not limited to, an all inclusive table of product attributes comparing brand name offer verses or equal offering.

In order for the government to make an "or equal" determination of the offered product(s), the furnished information must delineate each applicable characteristic, unit of measure, and test method of the offered product(s) directly correlated to each of the requirements delineated in the item purchase description. Failure to furnish this information/literature will result in the bid being rejected as non-responsive and will not be considered for award. (see FAR clause 52.211-6).

Applies to item(s) : 1, 2, 3, 4, 5, 6, 7 and 8.

Printed on: 9/6/2012, 10:07:43 AM Page 2

_1126594845.doc

File details come from the government source that posted it. Updated Nov 14, 2017.