RFQ-QSDLA-Z6-12-1499-SQ -1-25-2012.doc

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER)

1 | 50

UNDER BDSA REG. 2 (

RATING

GSA, FAS, Southwest Supply Center

Fire and Industrial Acquisition Branch (QSDLAC-Z6) 819 Taylor Street, Room 6A00 Fort Worth, TX 76102-6114

Delivery – 30 DAYS AFAA OR SOONER

First Article Samples 45 Days After Notice of Award OR SOONER

(See Schedule)

NUMBER

850-5515 - VOICE

9. DESTINATION

To be shown on each order issued against this Standing Quote Agreement.

a. NAME

b. COMPANY

b. STREET ADDRESS

c. STREET ADDRESS

c. CITY

d. CITY

e. STATE

f. ZIP

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5A ON OR

BEFORE CLOSE OF BUSINESS (Date)

February 6, 2012

3:30 PM CST

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5A. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

A. This is a Request for Quote (RFQ) for a Standing Quote Agreement (SQA) for a two-year period, from February 1, 2012 or DATE OF AWARD through January 31 2014, (not $150,000). After the second year if the agreement has not reached $150,000 a review will be done for a possible extension. After the first year any request for a price increase will be a matter of negotiation. If the SQA reaches the $150,000 before the end of the two years, the agreement will be cancelled in its entirety at no cost to either party.

B. The requirements listed are estimates only and no guarantee is given as to the dollar amount to be purchased.

C. If submitting a product under Buy American Act-Free Trade Agreement-Israeli Trade Act please see, clauses 52.225-3 and 52.225-4.

D. The Government will award a Standing Quote Agreement to the offeror determined as the lowest price technically acceptable offer.

Evaluation Factors:

1. TECHNICAL ACCEPTABILITY. Technical acceptability is defined as meeting or exceeding the Government’s Item

Purchase Description for each item offered in response to this RFQ and complying with the required delivery schedule.

2. LOWEST EVALUATED PRICE. The lowest total aggregate price (“Per Unit SQA Price” or “Per Unit Destination SQA Price” multiplied by the “Estimated 24 month Quantity”) will be considered for award.

E. Delivery is required within 30 days after notice of first article approval or sooner.

F. Award will be made in aggregate by group. Award will be FOB Destination.

G. Inspection will be at Source.

H. The Item Purchase Descriptions and Schedule of Items are shown on pages 3 thru 14.

I. Required Clauses, terms and conditions, applicable to all items in this Request for Quotation, is shown on pages 16 thru 50.

J. This is only a request for pricing. Delivery orders will be issued pursuant to the evaluation of the quotations received. DO NOT SHIP.

K. When responding to this Request for Quotation, complete and return the entire package. If you “No Quote,” please indicate and return page 1 only.

12. DISCOUNT FOR PROMPT PAYMENT (

NOTE: Additional provisions and representations ( are ( are not attached.

c. COUNTY

AREA CODE

AUTHORIZED FOR LOCAL REPRODUCTION

STANDARD FORM 18 Re. 6-95) Block 11 continued.

NOTE: Inspection is at Source.

L. This procurement is not set-aside from small business concerns.

M. Berry Amendment does not apply to this procurement.

N. Certification of NFPA Standard 1977, 2011 Edition is required at the time of submission to be considered for award. The gloves shall be subject to First Article Inspection.

Q. The North American Industry Classification System (NAICS) code for this acquisition is *315992*.

R. FAR 52.212-1, Instructions to Offerors – Commercial Items (June 2008) is incorporated by reference; found on page 29. Clause is tailored in paragraph (b), replace the entries showing “SF 1449” references with “SF 18,” and paragraph (h) “Multiple awards.” is replaced with a “Single award agreement.” to be issued as a result of this RFQ.

S. FAR 52.212-4, Contract Terms and Conditions – Commercial Items (June 2010) Found on page 25. Replace the entries showing “SF 1449” references with “SF 18,” T.

When responding to this RFQ, you may submit the entire document via mail or email. Preferably by email to sharita.sheppard@gsa.gov. The full document and all supporting documentation must be received by the closing date and time. The following address can be used to submit your offer by mail:

GSA, Federal Acquisition Service

FIRE AND INDUSTRIAL ACQUISITION BRANCH

Attn: Sharita Sheppard (QSDLAC-Z6)

819 Taylor St. Room 6A00

Fort Worth, TX 76102

U.

Offerors are responsible for submitting offers, so as to reach the Government office designated in the RFQ by the time specified (See Block 10). It is preferred that each offer package be submitted as in attachment to the RFQ response via email. If offer is received later than the exact time specified in block 10 of the RFQ, it will be considered “late” and will not be accepted.

V.

This is notice that the Government intends to evaluate offers and award will be made on initial quotes, and advises offerors to submit their best terms and prices in their initial quotation.

The Government will not make assumptions concerning the offeror’s intent. Clear identification is the sole responsibility of the offeror.

ALL COMPLETED PAGES (1-50) MUST BE RETURNED WITH YOUR OFFER (NO EXCEPTION). FAILURE TO PROVIDE THE REQUIRED INFORMATION MAY RESULT IN YOUR OFFER NO LONGER BEING EVALUATED/CONSIDERED FOR POSSIBLE AWARD.

Request for Quotation # QSDLA-Z6-12-1499-SQ Dated 1-25-2012 A. Taxpayer Identification Number (TIN): _____________________

B. Data Universal Numbering System (DUNS): ______________________

C. Point of Contact: ______________________

Phone Number: _______________________

Fax: __________________________

E-Mail Address: _______________________

Are you a large or small business? __________________

Are you a manufacturer or dealer? __________________

C. Supplier Name*: ___________________________

Point of Contact*: __________________________

Supplier DUNS*: ___________________________

Supplier TIN*: _____________________________

Is your supplier large or small? _________________

(Please complete the Supplier’s name, TIN and DUNS number for each NSN if different)(Note: “Supplier” refers to the company providing you the product, if you are not the manufacturer).

ITEM PURCHASE DESCRIPTION

Aggregate Group I

NSN: 8415-01-565-0620 Dated 1/11/2012

NFES 1640

GLOVES, BRUSHED PIGSKIN (S): Gloves shall meet NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, edition in effect, with the following characteristics:

Shall be made of 3.0 to 3.5 oz. brushed pigskin; Natural color; Shall not contain PCP, salts or esters; Anatomically designed; Gunn cut, keystone double layer thumb crotch; Double row stitching around inset thumb; Elastic wrist shirring; Bound hem; Storage strap; Lock-stitched 8-10 stitches per inch using spun kevlar thread minimum break strength 12 lbs.; Machine washable.

Size – Small

Unit of issue shall be PR.

Each pair of gloves shall consist of matching right and left gloves that measure within 1/4 inch of each other in length and width.

First Article Inspection: The gloves shall be subject to First Article Inspection. The gloves will be examined for compliance to NFPA 1977 requirements and the requirements of this IPD.

PACKAGING: Each pair of gloves shall be in a poly-bag with a label with the size and NSN number on the bag. One dozen (12) pairs of gloves are put into the inner carton that is also marked with the size, NSN number, and NFES number inside the case.

PACKING: Six (6) dozen pairs of gloves are in a full case. If the order is for less than a carton, no sizes will be mixed. The gloves shall be packed in a close-fitting corrugated fiberboard box, minimum burst strength 275 psi (maximum edge crush strength 32 lb per inch width), and shall be in compliance with the Uniform Freight Classification and the National Motor Freight Classification.

SUPPLEMENTAL PACKING AND PACKAGING REQUIREMENTS: All fiberboard boxes, cushioning, and dunnage used in packing and packaging of this item shall contain recovered materials in accordance with the EPA Comprehensive Procurement Guideline For Products Containing Recovered Materials (40 CFR 247) and the EPA Paper Products Recovered Materials Advisory Notice (Federal Register, Vol. 61, No. 104, May 29, 1996). The EPA's Recommended Recovered Fiber Content Levels for Paperboard and Packaging Products are available at http://www.epa.gov/osw/conserve/tools/cpg/products/paperbrd.htm SPECIAL MARKING: The National Fire Equipment System (NFES) number appearing below the National Stock Number (NSN) of this Item Purchase Description shall be marked on the shipping container below the NSN. The NFES number shall be preceded by "NFES".

MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.

PALLETIZATION: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp and Stockton Locations). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it.

STACKING: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel.

MATERIALS: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein.

UNITIZATION: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified.

UNITIZATION OF PALLET LOAD: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel.

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines can be found at the USDA.gov website. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

NSN: 8415-01-565-0623 Dated 1/11/2012

NFES 1639

GLOVES, BRUSHED PIGSKIN: Gloves shall meet NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, edition in effect, with the following characteristics:

Shall be made of 3.0 to 3.5 oz. brushed pigskin; Natural color; Shall not contain PCP, salts or esters; Anatomically designed; Gunn cut, keystone double layer thumb crotch; Double row stitching around inset thumb; Elastic wrist shirring; Bound hem; Storage strap; Lock-stitched 8-10 stitches per inch using spun kevlar thread minimum break strength 12 lbs.; Machine washable.

Size – Extra-Small

Unit of issue shall be PR.

Each pair of gloves shall consist of matching right and left gloves that measure within 1/4 inch of each other in length and width.

First Article Inspection: The gloves shall be subject to First Article Inspection. The gloves will be examined for compliance to NFPA 1977 requirements and the requirements of this IPD.

PACKAGING: Each pair of gloves shall be in a poly-bag with a label with the size and NSN number on the bag. One dozen (12) pairs of gloves are put into the inner carton that is also marked with the size, NSN number, and NFES number inside the case.

PACKING: Six (6) dozen pairs of gloves are in a full case. If the order is for less than a carton, no sizes will be mixed. The gloves shall be packed in a close-fitting corrugated fiberboard box, minimum burst strength 275 psi (maximum edge crush strength 32 lb per inch width), and shall be in compliance with the Uniform Freight Classification and the National Motor Freight Classification.

SUPPLEMENTAL PACKING AND PACKAGING REQUIREMENTS: All fiberboard boxes, cushioning, and dunnage used in packing and packaging of this item shall contain recovered materials in accordance with the EPA Comprehensive Procurement Guideline For Products Containing Recovered Materials (40 CFR 247) and the EPA Paper Products Recovered Materials Advisory Notice (Federal Register, Vol. 61, No. 104, May 29, 1996). The EPA's Recommended Recovered Fiber Content Levels for Paperboard and Packaging Products are available at http://www.epa.gov/osw/conserve/tools/cpg/products/paperbrd.htm SPECIAL MARKING: The National Fire Equipment System (NFES) number appearing below the National Stock Number (NSN) of this Item Purchase Description shall be marked on the shipping container below the NSN. The NFES number shall be preceded by "NFES".

MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.

PALLETIZATION: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp and Stockton Locations). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it.

STACKING: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel.

MATERIALS: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein.

UNITIZATION: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified.

UNITIZATION OF PALLET LOAD: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel.

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines can be found at the USDA.gov website. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

Aggregate Group II

NSN 8415-01-568-0006 Dated 1/18/2012

NFES 1475

GLOVES, SPLIT LEATHER (S): Gloves shall meet NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, edition in effect, with the following characteristics:

Shall be made of 3.0 to 3.5 oz. split cowhide; Tanned to resist cracking, peeling, and stiffening; Color: gray; Anatomically designed; Unlined; Gunn cut; Wing thumb; Continuous index finger construction; Elastic two inch long two-ply yellow Kevlar knit wristlet with spandex interspersed each 6th row; Storage strap; Minimum 8 stitches per inch using Kevlar 30/3 thread.

Size – Small

Unit of issue shall be PR.

Each pair of gloves shall consist of matching right and left gloves that measure within 1/4 inch of each other in length and width.

First Article Inspection: The gloves shall be subject to First Article Inspection. The gloves will be examined for compliance to NFPA 1977 requirements and the requirements of this IPD.

PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed in accordance with the latest revision of ASTM D 3951, Standard Practice for Commercial Packaging. Copies of ASTM standards are available from the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. Phone: 610-832-9585, Fax: 610-832-9555, Web site: www.astm.org, e-mail: service@astm.org.

SPECIAL MARKING: The National Fire Equipment System (NFES) number appearing below the National Stock Number (NSN) of this Item Purchase Description shall be marked on the shipping container below the NSN. The NFES number shall be preceded by "NFES".

MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.

SUPPLEMENTAL PACKING AND PACKAGING REQUIREMENTS: All fiberboard boxes, cushioning, and dunnage used in packing and packaging of this item shall contain recovered materials in accordance with the EPA Comprehensive Procurement Guideline For Products Containing Recovered Materials (40 CFR 247) and the EPA Paper Products Recovered Materials Advisory Notice (Federal Register, Vol. 61, No. 104, May 29, 1996). The EPA's Recommended Recovered Fiber Content Levels for Paperboard and Packaging Products are available at:

http://www.epa.gov/osw/conserve/tools/cpg/products/paperbrd.htm

PALLETIZATION: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp and Stockton Locations). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it.

STACKING: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel.

MATERIALS: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein.

UNITIZATION: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified.

UNITIZATION OF PALLET LOAD: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel.

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines can be found at the USDA.gov website. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

NSN 8415-01-568-0008 Dated 1/18/2012

NFES 1477

GLOVES, SPLIT LEATHER (L): Gloves shall meet NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, edition in effect, with the following characteristics:

Shall be made of 3.0 to 3.5 oz. split cowhide; Tanned to resist cracking, peeling, and stiffening; Color: gray; Anatomically designed; Unlined; Gunn cut; Wing thumb; Continuous index finger construction; Elastic two inch long two-ply yellow Kevlar knit wristlet with spandex interspersed each 6th row; Storage strap; Minimum 8 stitches per inch using Kevlar 30/3 thread.

Size – Large

Unit of issue shall be PR.

Each pair of gloves shall consist of matching right and left gloves that measure within 1/4 inch of each other in length and width.

First Article Inspection: The gloves shall be subject to First Article Inspection. The gloves will be examined for compliance to NFPA 1977 requirements and the requirements of this IPD.

PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed in accordance with the latest revision of ASTM D 3951, Standard Practice for Commercial Packaging. Copies of ASTM standards are available from the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. Phone: 610-832-9585, Fax: 610-832-9555, Web site: www.astm.org, e-mail: service@astm.org.

SPECIAL MARKING: The National Fire Equipment System (NFES) number appearing below the National Stock Number (NSN) of this Item Purchase Description shall be marked on the shipping container below the NSN. The NFES number shall be preceded by "NFES".

MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.

SUPPLEMENTAL PACKING AND PACKAGING REQUIREMENTS: All fiberboard boxes, cushioning, and dunnage used in packing and packaging of this item shall contain recovered materials in accordance with the EPA Comprehensive Procurement Guideline For Products Containing Recovered Materials (40 CFR 247) and the EPA Paper Products Recovered Materials Advisory Notice (Federal Register, Vol. 61, No. 104, May 29, 1996). The EPA's Recommended Recovered Fiber Content Levels for Paperboard and Packaging Products are available at:

http://www.epa.gov/osw/conserve/tools/cpg/products/paperbrd.htm

PALLETIZATION: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp and Stockton Locations). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it.

STACKING: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel.

MATERIALS: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein.

UNITIZATION: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified.

UNITIZATION OF PALLET LOAD: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel.

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines can be found at the USDA.gov website. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

NSN 8415-01-568-0011 Dated 1/18/2012

NFES 1474

GLOVES, SPLIT LEATHER (XS): Gloves shall meet NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, edition in effect, with the following characteristics:

Shall be made of 3.0 to 3.5 oz. split cowhide; Tanned to resist cracking, peeling, and stiffening; Color: gray; Anatomically designed; Unlined; Gunn cut; Wing thumb; Continuous index finger construction; Elastic two inch long two-ply yellow Kevlar knit wristlet with spandex interspersed each 6th row; Storage strap; Minimum 8 stitches per inch using Kevlar 30/3 thread.

Size – Extra-Small

Unit of issue shall be PR.

Each pair of gloves shall consist of matching right and left gloves that measure within 1/4 inch of each other in length and width.

First Article Inspection: The gloves shall be subject to First Article Inspection. The gloves will be examined for compliance to NFPA 1977 requirements and the requirements of this IPD.

PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed in accordance with the latest revision of ASTM D 3951, Standard Practice for Commercial Packaging. Copies of ASTM standards are available from the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. Phone: 610-832-9585, Fax: 610-832-9555, Web site: www.astm.org, e-mail: service@astm.org.

SPECIAL MARKING: The National Fire Equipment System (NFES) number appearing below the National Stock Number (NSN) of this Item Purchase Description shall be marked on the shipping container below the NSN. The NFES number shall be preceded by "NFES".

MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.

SUPPLEMENTAL PACKING AND PACKAGING REQUIREMENTS: All fiberboard boxes, cushioning, and dunnage used in packing and packaging of this item shall contain recovered materials in accordance with the EPA Comprehensive Procurement Guideline For Products Containing Recovered Materials (40 CFR 247) and the EPA Paper Products Recovered Materials Advisory Notice (Federal Register, Vol. 61, No. 104, May 29, 1996). The EPA's Recommended Recovered Fiber Content Levels for Paperboard and Packaging Products are available at:

http://www.epa.gov/osw/conserve/tools/cpg/products/paperbrd.htm

PALLETIZATION: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp and Stockton Locations). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it.

STACKING: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel.

MATERIALS: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein.

UNITIZATION: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified.

UNITIZATION OF PALLET LOAD: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel.

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines can be found at the USDA.gov website. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

NSN 8415-01-568-0012 Dated 1/18/2012

NFES 1478

GLOVES, SPLIT LEATHER (XL): Gloves shall meet NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, edition in effect, with the following characteristics:

Shall be made of 3.0 to 3.5 oz. split cowhide; Tanned to resist cracking, peeling, and stiffening; Color: gray; Anatomically designed; Unlined; Gunn cut; Wing thumb; Continuous index finger construction; Elastic two inch long two-ply yellow Kevlar knit wristlet with spandex interspersed each 6th row; Storage strap; Minimum 8 stitches per inch using Kevlar 30/3 thread.

Size – Extra-Large

Unit of issue shall be PR.

Each pair of gloves shall consist of matching right and left gloves that measure within 1/4 inch of each other in length and width.

First Article Inspection: The gloves shall be subject to First Article Inspection. The gloves will be examined for compliance to NFPA 1977 requirements and the requirements of this IPD.

PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed in accordance with the latest revision of ASTM D 3951, Standard Practice for Commercial Packaging. Copies of ASTM standards are available from the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. Phone: 610-832-9585, Fax: 610-832-9555, Web site: www.astm.org, e-mail: service@astm.org.

SPECIAL MARKING: The National Fire Equipment System (NFES) number appearing below the National Stock Number (NSN) of this Item Purchase Description shall be marked on the shipping container below the NSN. The NFES number shall be preceded by "NFES".

MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.

SUPPLEMENTAL PACKING AND PACKAGING REQUIREMENTS: All fiberboard boxes, cushioning, and dunnage used in packing and packaging of this item shall contain recovered materials in accordance with the EPA Comprehensive Procurement Guideline For Products Containing Recovered Materials (40 CFR 247) and the EPA Paper Products Recovered Materials Advisory Notice (Federal Register, Vol. 61, No. 104, May 29, 1996). The EPA's Recommended Recovered Fiber Content Levels for Paperboard and Packaging Products are available at:

http://www.epa.gov/osw/conserve/tools/cpg/products/paperbrd.htm

PALLETIZATION: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp and Stockton Locations). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it.

STACKING: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel.

MATERIALS: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein.

UNITIZATION: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified.

UNITIZATION OF PALLET LOAD: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel.

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines can be found at the USDA.gov website. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

NSN 8415-01-568-0013 Dated 1/18/2012

NFES 1476

GLOVES, SPLIT LEATHER (M): Gloves shall meet NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, edition in effect, with the following characteristics:

Shall be made of 3.0 to 3.5 oz. split cowhide; Tanned to resist cracking, peeling, and stiffening; Color: gray; Anatomically designed; Unlined; Gunn cut; Wing thumb; Continuous index finger construction; Elastic two inch long two-ply yellow Kevlar knit wristlet with spandex interspersed each 6th row; Storage strap; Minimum 8 stitches per inch using Kevlar 30/3 thread.

Size – Medium

Unit of issue shall be PR.

Each pair of gloves shall consist of matching right and left gloves that measure within 1/4 inch of each other in length and width.

First Article Inspection: The gloves shall be subject to First Article Inspection. The gloves will be examined for compliance to NFPA 1977 requirements and the requirements of this IPD.

PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed in accordance with the latest revision of ASTM D 3951, Standard Practice for Commercial Packaging. Copies of ASTM standards are available from the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. Phone: 610-832-9585, Fax: 610-832-9555, Web site: www.astm.org, e-mail: service@astm.org.

SPECIAL MARKING: The National Fire Equipment System (NFES) number appearing below the National Stock Number (NSN) of this Item Purchase Description shall be marked on the shipping container below the NSN. The NFES number shall be preceded by "NFES".

MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.

SUPPLEMENTAL PACKING AND PACKAGING REQUIREMENTS: All fiberboard boxes, cushioning, and dunnage used in packing and packaging of this item shall contain recovered materials in accordance with the EPA Comprehensive Procurement Guideline For Products Containing Recovered Materials (40 CFR 247) and the EPA Paper Products Recovered Materials Advisory Notice (Federal Register, Vol. 61, No. 104, May 29, 1996). The EPA's Recommended Recovered Fiber Content Levels for Paperboard and Packaging Products are available at:

http://www.epa.gov/o…