QQ Reissue Pro-Cut Lathe JSRCC .pdf

Rev3-04.03.23

QQ #66810

Repost Pro-Cut™ Lathe Reynolds Community College

Repost Pro-Cut™ Lathe

Reynolds Community College

Small Business Set-Aside Award

Questions will be Received until: 5/21/2024 at 2:00 PM local time

Bids will be Received Until: 5/24/2024 at 2:00 PM local time. All bids must be received electronically through eVA by the date and time stated immediately above. Emailed and or faxed bids will not be considered.

CONTACTING ANY OTHER REPRESENTATIVE OF THE VCCS OR THE COLLEGE MAY RESULT

IN THE BID BEING DEEMED NON-RESPONSIVE

Any inquiries regarding this solicitation should be directed only to: Blake Underwood , Lead Buyer, Email: bunderwood@ssc.vccs.edu Phone: 540-591-4000

TABLE OF CONTENTS PAGE #

I. Purpose 2

II. Questions Regarding Unsealed Solicitation 2

III. General Definitions 2

IV. Scope of Work 2

V. Specifications Requirements 4

VI. Method for Payment 5

Please refer to terms and conditions attached to this solicitation.

ATTACHMENTS PAGE #

A. Certificate of Insurance* 6

* This item should be completed and returned as part of the Unsealed Solicitation submission package before services can proceed. A certificate of Insurance according to the requirement in this QQ must be submitted three (3) business days from date of closed bid or submitted bids will be deemed non-responsible.

Note: This public body does not discriminate against faith-based organizations in accordance with the Code of Virginia, § 2.2- 4343.1 or against a bidder because of race, religion, color, sex, national origin, age, disability, sexual orientation, gender identity, political affiliation, or veteran status or any other basis prohibited by state law relating to discrimination in employment. Faith-based organizations may request that the issuing agency not include subparagraph 1.e in General Terms and Condition C. Such a request shall be in writing and explain why an exception should be made in that Quick Quote.

SET-ASIDES IN ACCORDANCE WITH THE SMALL BUSINESS ENHANCEMENT AWARD

PRIORITY: This solicitation is set-aside for award priority to DSBSD-certified micro businesses or small businesses when designated as “Micro Business Set-Aside Award Priority” or “Small Business Set-Aside Award Priority” accordingly in the solicitation.

DSBSD-certified micro businesses or small businesses also includes DSBSD-certified women-owned and minority-owned businesses when they have received the DSBSD small business certification. For purposes of award, bidders shall be deemed micro businesses or small businesses if and only if they are certified as such by DSBSD on the due date for receipt of bids.

I. PURPOSE:

The Virginia Community College Shared Services Center (herein referred to as “SSC”) is

Soliciting bids from qualified firms to Furnish, Deliver and Assemble, A Pro-Cut™ Lathe as requested, to Reynolds Community College 1651 E Parham RD Richmond Virginia 23228

It is anticipated that deliveries will be completed by 6/4/2024 no later than the end of the business day.

II. QUESTIONS REGARDING UNSEALED SOLICITATION

Any questions regarding the Unsealed Solicitation shall be addressed to Blake Underwood at bunderwood@ssc.vccs.edu

III. GENERAL:

For the purpose of clarification, each firm receiving this Unsealed Solicitation is referred to as a “Bidder” and the Bidder awarded the contract to supply the goods is referred to as a “Contractor”. Virginia Community College Shared Services Center is referred to as “Department”, “VCCS or as “SSC”, and “Representative” refers to the SSC Contract Administrator who will be administering the contract. This Unsealed Solicitation states the instructions for submitting bids, the procedure, and criteria by which a contract may be awarded, and the contractual terms which will exclusively govern the contract between SSC and the Contractor.

All Bids must be received ELECTRONICALLY THROUGH eVA at the date and time stated above.

mailto:bunderwood@ssc.vccs.edu

EMAILED AND OR FAXED BIDS WILL NOT BE CONSIDERED.

IV. SCOPE OF WORK:

1. Unit Bid Pricing: Bid shall be in the form of a firm unit price during the contract period. Unit Price per lot shall include transport and delivery to site for each lot item bid. Bidders shall provide a fully completed detailed quote with their bid response. Failure to submit a detailed quote along with their bid may render the vendor as non-responsive.

2. Equivalency: The Commonwealth reserves all rights to determine the equivalency of any substituted product. All bidders proposing an equivalent item shall supply sales sheets or other manufacturer supplied documents to allow the Commonwealth to determine equivalency.

3. Delivery Point: The address for each delivery location is Reynolds Community College 1651 E Parham RD Richmond Virginia 23228

4. Off-Loading: The Contractor shall be responsible for off-loading material in neat stockpiles unless otherwise directed. The following may be needed to unload delivery: Forklift, Liftgate

5. Delivery Hours: For planning purposes, the normal hours for acceptance of deliveries are (Monday through Friday between the hours of 8:00AM and 5:00PM), except on days designated as Federal or State holidays or mandated closing.

6. Delivery Notification: The Contractor shall coordinate actual delivery notification at least twenty-four (24) hours prior to intended delivery. Contact information for each delivery will be given at the time of award.

7. Delivery Need by Date: 6/4/2024

8. Warranty: Standard Warranty

V. SPECIFICATION REQUIREMENTS:

Reynolds Community College seeks a qualified firm to furnish, deliver and assemble a Pro-Cut™ Bench Lathe to include the standard pkg see specifications below.

QTY Item # Description 1 PCIB 17pk Pro-Cut™ Bench Lathe Standard Package to include the following items

• 50-778 performance plus Insert

• 37-740 T8 Tip Screw Wrench

• 50-744 Vented Disc Chip Deflector

• 50-4744 Band Silencer-Drum

• 37-4065 3Mm Gib Screw Wrench

• 50-4010 Double Taper Spacer 33. 1.42 6mm

• 50-4011 Double Taper Spacer 33.5 44mm -2 QTY

• 50-4012 Double Taper Spacer 43.3 52.9 mm

• 50-4013 Double Taper Spacer 53.1 61.8mm

• 50-4014 Double Taper Spacer 62.3 71.9mm

• 50-4015 Small Cone 62 mm

• 50-4016 Medium Cone 83mm

• 50-4017 Large Cone 99mm

• 50-4035 Extra-large Cone 115mm

• 50-4018 1” Arbor Thread Spacer

• 50-4019/50-4020 Matched Concave/Convex

Spherical Washer set

• 50-4021 Standard Spring

• 50-4022 5.75 Bell Clamps

• 50-4023 4.00 Bell Clamps

• 50-4025 Standard 1 Arbor

• 36-4020 M24x2.0LH threaded Arbor Nut

• 50-4066 35mm Arbor Nut Wrench

• 36-4005 Draw Bar Nut M 12

1 Assemble- to include any Calibration

1 Delivery

VI. METHOD FOR PAYMENT:

Payment will be made (in accordance with the Virginia Prompt Payment Act) within 30 days after receipt of valid invoice and verification of satisfactory goods received and/or completion of work.

Invoices shall be submitted to the address listed below for all items completed within the designated billing period.

Payment will be made to the vendor in accordance with the Commonwealth of Virginia Prompt Payment Act. Invoice(s) shall be emailed to invoice@ssc.vccs.edu or mailed to the address below, referencing any purchase order numbers that result from this solicitation.

Virginia Community College Shared Services Center Attn: Accounts Payable

147 Daleville Centre Drive Daleville, VA 24083

Remainder of page intentionally left blank

ATTACHMENT A – CERTIFICATE OF INSURANCE SAMPLE