QMAA-HM-150012-D_Attachment_D_Vendor_Response_Document.pdf

QMAA-HM-150012-D

ATTACHMENT D, VENDOR RESPONSE DOCUMENT

OFFEROR INFORMATION

Offeror’s Name:

Offeror’s DUNS: ( )

(DUNS+4)

Offeror’s TIN:

Offeror’s Address:

(PLEASE INCLUDE ZIP +4)

Offeror’s Phone:

Offeror’s Email:

Offeror’s Fax:

EXCEPTIONS TO TERMS AND CONDITIONS

Does the offeror take exception to any of the Terms and Conditions (Contract Clauses) presented in the Solicitation Document?

____ No

____ Yes

(If “Yes” is selected, the offeror must provide an attachment listing each contract clause and their exception. The exceptions the offeror is requesting will be negotiated with the GSA Contracting Official(s). Please title the attachment, “Exceptions to Terms and Conditions.”)

VERIFICATION OF REPS AND CERTS (52.212-3)

The offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications -

Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference:

____ Yes

____ No

(If “No” is selected, the offeror must submit an attachment listing the paragraph(s) which have changed and identify, after each paragraph, what has changed.)

Please title the attachment, “Exceptions to Reps and Certs - 52.212-3.”

REGULATION RESPONSES:

Please enter response(s) as necessary for each regulation listed. (If attachments are required for a response, please indicate so and document the title of the attachment which contains the response):

D.4 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS-

COMMERCIAL ITEMS (DEC 2014 ) –

D.13 52.215-6 PLACE OF PERFORMANCE (OCT 1997)

(a) The offeror or respondent, in the performance of any contract resulting from this solicitation, intends, does not intend [check applicable block] to use one or more plants or facilities located at a different address from the address of the offeror or respondent as indicated in this proposal or response to request for information.

(b) If the offeror or respondent checks “intends” in paragraph (a) of this provision, it shall insert in the following spaces the required information:

Place of Performance(Street Address, City, State, County, Zip Code)

Name and Address of Owner and

Operator of the Plant or Facility if Other

Than Offeror or Respondent

D.17 52.225-6 TRADE AGREEMENTS CERTIFICATE (JAN 2005)

(a) The offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled “Trade Agreements.”

(b) The offeror shall list as other end products those supplies that are not U.S.-made or designated country end products.

Other End Products:

LINE ITEM NO. COUNTRY OF ORIGIN

[List as necessary]

(c) The Government will evaluate offers in accordance with the policies and procedures of

Part 25 of the Federal Acquisition Regulation. For line items covered by the WTO GPA, the

Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American Act. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for those products are insufficient to fulfill the requirements of this solicitation.

D.33 E-FSS-514 PRODUCTION AND INSPECTION POINT(S) (JUN 1990)

(a) Production Point. Offeror shall insert, in the appropriate spaces provided below, the names of the manufacturers of the items offered and the address and telephone number of the facility(ies) at which the items will be manufactured or produced.

(b) Source Inspection Point. Offeror shall indicate, in the spaces provided below, the location(s) at which the supplies will be inspected or made available for inspection. If the addresses of the respective production and inspection points are identical, the offeror should insert "same" in the inspection point column.

PRODUCTION POINT-- INSPECTION POINT

ITEM NAME OF NAME, ADDRESS (If other than

NO(S). MANUFACTURE TELEPHONE NUMBER (Including County), and

Production Point)

NOTE: If additional space is needed, the offeror may furnish the requested information by an attachment to the offer.

D.34 F-FSS-200-B DELIVERY--F.O.B. DESTINATION (MAY 1991)

Prices offered must cover delivery F.O.B. Destination (FAR 52.247-34) to the delivery location listed below:

TINKER AIR FORCE BASE

BUILDING 801, ATTN DAN HANSEN

6150 S. AIR DEPOT BLVD.

OKLAHOMA CITY, OK 73145

D.318 G-FSS-900-A CONTACT FOR CONTRACT ADMINISTRATION (JAN 1994)

Offerors are required to designate a person to be contacted for prompt contract administration.

https://www.acquisition.gov/far/current/html/FARTOCP25.html#wp225048

NAME ______________________________________________________

TITLE ______________________________________________________

ADDRESS __________________________________________________

____________________________________ ZIP CODE ______________

TELEPHONE NO. (_______) ___________ FAX NO. _______________

D.39 G-FSS-914-B CONTRACTOR'S REMITTANCE (PAYMENT) ADDRESS (SEP

1996)

(a) Payment by electronic funds transfer (EFT) is the Government’s preferred method of payment. However, under certain conditions, the Government may elect to make payment by check. The offeror shall indicate below the payment (remittance) address to which

Government checks should be mailed for payment of proper invoices submitted under a resultant contract.

PAYMENT ADDRESS:

(b) All offerors are cautioned that if the payment address shown on an invoice differs from that shown above, the address above will govern. Payment to any other address, except as provided for through EFT payment methods, will require an administrative change to the contract.

D.41 I-FSS-88A POINT OF PRODUCTION (MAR 1990)

Offeror shall insert, in the spaces below or on an attached sheet, the names of the manufacturers of the components of the item(s) offered and the address(es) and telephone number(s) of the production facility(ies).

ITEM NO. COMPONENT NO. NAME OF

MANUFACTURER

PRODUCTION

POINT – NAME,

ADDRESS(including country), AND

TELEPHONE

NUMBER

QMAA-HM-150011-D

E.4 52.215-6 PLACE OF PERFORMANCE (OCT 1997)

(a) The offeror or respondent, in the performance of any contract resulting from this solicitation, intends, does not intend [check applicable block] to use one or more plants or facilities located at a different address from the address of the offeror or respondent as indicated in this proposal or response to request for information.

(b) If the offeror or respondent checks “intends” in paragraph (a) of this provision, it shall insert in the following spaces the required information:

PLACE OF PERFORMANCE (STREET

ADDRESS, CITY, STATE, COUNTY, ZIP

CODE) AND DUNS NUMBER

NAME AND ADDRESS OF OWNER AND OPERATOR

OF THE PLANT OR FACILITY IF OTHER THAN

OFFEROR OR RESPONDENT

E.7 52.225-18 PLACE OF MANUFACTURE (SEP 2006)

(a) Definitions. As used in this clause—

Manufactured end product means any end product in Federal Supply Classes (FSC) 1000-9999, except—

(1) FSC 5510, Lumber and Related Basic Wood Materials;

(2) Federal Supply Group (FSG) 87, Agricultural Supplies;

(3) FSG 88, Live Animals;

(4) FSG 89, Food and Related Consumables;

(5) FSC 9410, Crude Grades of Plant Materials;

(6) FSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) FSC 9610, Ores;

(9) FSC 9620, Minerals, Natural and Synthetic; and

QMAA-HM-150011-D

(10) FSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

(b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly—

(1) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or

(2) Outside the United States.

E.11 K-FSS-1 AUTHORIZED NEGOTIATORS (MAR 1998)

The offeror shall, in the spaces provided below, fill in the names of all persons authorized to negotiate with the Government in connection with this request for proposals or quotations.

(List the names, titles, telephone numbers and electronic mail address of the authorized negotiators.)