Q27-012.DesignBuild Vehicle Maintenance Upfitting Building.pdf
PDF 1 MB Posted
- Solicitation number
- Q27-012
- Issued by
- Fort Bend County, Texas
About this file
Summary of RFQ 27-012: Design/Build Services for Vehicle Maintenance Upfitting Building
This is a Request for Qualifications (RFQ) issued by Fort Bend County, Texas, for design/build services related to a Vehicle Maintenance Upfitting Building located at 230 Legion Drive, Richmond, TX 77469. The selected Design/Build firm will serve as both Architect/Engineer and General Contractor. The project involves designing and constructing a 50' x 100' pre-engineered metal building featuring a large open work area, office, restroom, and parts storage shelving, with all site utility connections included. The scope includes permit acquisition and verification of field conditions prior to construction. The RFQ was issued on November 1, 2026, with a pre-RFQ conference scheduled for November 10, 2026, at 9:00 AM at Fort Bend County Purchasing Department in Richmond, Texas. The deadline for submitting questions is November 17, 2026, with RFQ responses due by November 24, 2026, at 2:00 PM Central Time via the Bonfire Portal or sealed hard copy submission. Evaluation of submissions is scheduled for the week of December 6, 2026, with Commissioners Court approval for contract negotiation anticipated on January 14, 2027, and final contract approval on February 11, 2027. Submissions must include a bound report not exceeding 25 pages with specific tabs addressing understanding of scope, firm experience, staff experience, financial stability, and management plan.
The estimated project budget is $520,000. Fort Bend County will award a design/build contract under Texas Government Code Section 2269.301. All respondents must submit current proof of insurance meeting specified coverage limits, including Workers' Compensation, Employers' Liability ($1,000,000 minimum), Commercial General Liability ($1,000,000 each occurrence/$2,000,000 aggregate), Business Automobile Liability ($1,000,000), and Professional Liability ($1,000,000). Builder's Risk Insurance is also required before issuance of a Purchase Order. Prevailing wage requirements apply under Texas Government Code Chapter 2258, with specific wage rates established for various construction classifications, effective from the wage determination dated May 18, 2026. Performance and Payment Bonds are required for projects exceeding $25,000 and $100,000 respectively, issued by surety companies rated "A" or better by Best's. A 5% retainage is withheld from each application for payment and released upon final completion. Respondents must complete Form 1295 (Certificate of Interested Parties) unless publicly traded, along with W-9, vendor information forms, tax certification, and Stormwater Management Program acknowledgment. No set-asides are indicated in this solicitation.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Prepared: 9/24/2026 Issued: 11/1/2026
Fort Bend County, Texas Request for Qualifications
Design/Build Services for Vehicle Maintenance Upfitting Building for Fort Bend County
RFQ 27-012
SUBMIT RFQS TO: SUBMIT NO LATER THAN:
Electronically using the Bonfire Portal : Tuesday, November 24, 2026 https://fortbendcountytx.bonfirehub.com/portal/ 2:00 PM (Central)
OR
Fort Bend County Purchasing Department MARK ENVELOPE:
Travis Annex 301 Jackson, Suite 201 RFQ 27-012 Richmond, TX 77469 Vehicle Maintenance Upfitting Building Note: All correspondence must include the term “Purchasing Department” in address to assist in proper delivery
-IF SUBMITTING A HARD COPY SEALED RESPONSE,
ALL RFQs MUST BE RECEIVED IN AND TIME/DATE STAMPED BY THE PURCHASING OFFICE
OF FORT BEND COUNTY ON OR BEFORE THE SPECIFIED TIME/DATE STATED ABOVE.
RFQs RECEIVED AS REQUIRED WILL THEN BE OPENED AND NAMES PUBLICLY READ.
RFQs RECEIVED AFTER THE SPECIFIED TIME, WILL BE RETURNED UNOPENED.
-IF SUBMITTING AN ELECTRONIC SEALED RESPONSE,
USING THE “BONFIRE” ELECTRONIC BIDDING PORTAL,
USE LINK https://fortbendcountytx.bonfirehub.com/portal/, CLICK THE HELP BUTTON PROVIDED IN THE BONFIRE WEBSITE AS NEEDED.
Results will not be given by phone. Requests for information must be in Results will be provided after final agreement writing and directed to:
is approved by Commissioners Court. Tyler Kendziora Contracts Manager Tyler.Kendziora@fortbendcountytx.gov
Vendor Responsibilities:
Download and complete any addendums. (Addendums will be posted on the Bonfire Portal no
Later than 48 hours prior to bid opening) Submit response in accordance with requirements stated on the cover of this document.
DO NOT submit responses via email or fax.
https://fortbendcountytx.bonfirehub.com/portal/
COUNTY PURCHASING AGENT
Fort Bend County, Texas
Vendor Information
Legal Company Name (top line of W9) Business Name (if different from legal name)
Type of Business
Federal ID # or S.S. #
Age in Business?Corporation/LLC Sole Proprietor/Individual
Partnership Tax Exempt
SAM.gov Unique Entity ID #
SAM.gov
CAGE / NCAGE
Remittance Address
City/State/Zip
Physical Address
City/State/Zip
Phone Number
Contact Person E-mail
Check all that apply to the company listed above and provide certification number.
DBE-Disadvantaged Business Enterprise ___ SBE-Small Business Enterprise ___ HUB-Texas Historically Underutilized Business __ WBE-Women’s Business Enterprise __
Certification # ___________ Certification # ___________ Certification # ___________ Certification # ___________
Cert Date Exp Date
Company’s gross annual receipts
<$500,000 _____
$5,000,000-$16,999,999 ___
$500,000-$4,999,999 _____ $17,000,000-$22,399,999 _____ >$22,400,000 _____
NAICs codes (Please enter all that apply) Signature of Authorized Representative
Printed Name
Title
Date
Brooke Lindemann Purchasing Agent Office (281) 341-8640
THIS FORM MUST BE SUBMITTED WITH THE SOLICITATION RESPONSE
Publicly Traded Business ___ Noo ___ Yes Ticker Symbol ________
Fort Bend County RFQ 27-012
1.0 OBJECTIVE:
Fort Bend County, herein requests Request for Qualifications from qualified firms for design/build services for Vehicle Maintenance Upfitting Building, located at 230 Legion Drive, Richmond, TX 77469. The Design/Build firm, herein referred to as “Respondent”, shall serve in the capacity of an Architect/Engineer and General Contractor.
2.0 GENERAL:
2.1 The selected party will be requested to submit a proposal for a Design/Build contract under the provisions of the §2269.301 of the Texas Government Code.
2.2 Respondents should carefully read the information contained herein and submit a complete response to all requirements and questions as directed.
2.3 Submittals and any other Respondent information in response to this RFQ shall become the property of Fort Bend County.
2.4 Fort Bend County will not provide compensation to Respondents for any expenses incurred by the Respondent(s) for submittal preparation or for any demonstrations that may be made, unless otherwise expressly stated or required by law. Respondents submit qualifications at their own risk.
2.5 Each submittal should be prepared simply and economically, providing a straightforward, concise description of your firm’s ability to meet the requirements, and an understanding of the County’s needs.
2.6 Fort Bend County makes no guarantee that an award will be made as a result of this RFQ. Fort Bend County reserves the right to accept or reject any or all submittals, with or without cause, waive any formalities or minor technical inconsistencies, or delete any item/requirement from this RFQ or contract when deemed to be in the County’s best interest. Representations made within the qualifications submittal and any subsequent proposal will be binding on responding firms. Fort Bend County will not be bound to act by any previous communication or submittal by the firms other than those responding to this RFQ.
3.0 TEXAS ETHICS COMMISSION FORM 1295:
3.1 Effective January 1, 2016 all contracts executed by Commissioners Court, regardless of the dollar amount, will require completion of Form 1295 "Certificate of Interested Parties", per the new Government Code Statute §2252.908. All vendors submitting a response to a formal Bid, RFP, RFQ or any contracts, contract amendments, renewals or change orders are required to complete the Form 1295 online through the State of Texas Ethics Commission website. Please visit: https://www.ethics.state.tx.us/filinginfo/1295/ https://www.ethics.state.tx.us/filinginfo/1295/
3.2 On-line instructions:
3.2.1 Name of governmental entity is to read: Fort Bend County.
3.2.2 Identification number used by the governmental entity is: Q27-012
3.2.3 Description is the title of the solicitation: Design/Build Services Vehicle Maintenance Upfitting Building
3.3 Highest evaluated vendor (s) will be required to provide the Form 1295 within three (3) calendar days from notification; however, if your company is publicly traded you are not required to complete this form.
4.0 INSURANCE:
4.1 All respondents shall submit, with response, a current certificate of insurance indicating coverage in the amounts stated below. In lieu of submitting a certificate of insurance, respondents may submit, with RFQ, a notarized statement from an Insurance company, authorized to conduct business in the State of Texas, and acceptable to Fort Bend County, guaranteeing the issuance of an insurance policy, with the coverage stated below, to the firm named therein, if successful, upon award of this Contract.
4.2 At contract execution, contractor shall furnish County with property executed certificates of insurance which shall evidence all insurance required and provide that such insurance shall not be canceled, except on 30 days prior written notice to County. Contractor shall provide certified copies of insurance endorsements and/or policies if requested by County. Contractor shall maintain such insurance coverage from the time Services commence until Services are completed and provide replacement certificates, policies and/or endorsements for any such insurance expiring prior to completion of Services. Contractor shall obtain such insurance written on an Occurrence form (or a Claims Made form for Professional Liability insurance) from such companies having Best’s rating of A/VII or better, licensed or approved to transact business in the State of Texas, and shall obtain such insurance of the following types and minimum limits:
4.2.1 Workers’ Compensation insurance. Substitutes to genuine Workers’
Compensation Insurance will not be allowed.
4.2.2 Employers’ Liability insurance with limits of not less than $1,000,000 per injury by accident, $1,000,000 per injury by disease, and $1,000,000 per bodily injury by disease.
4.2.3 Commercial general liability insurance with a limit of not less than
$1,000,000 each occurrence and $2,000,000 in the annual aggregate.
Policy shall cover liability for bodily injury, personal injury, and property damage and products/completed operations arising out of the business operations of the policyholder.
4.2.4 Business Automobile Liability coverage with a combined Bodily
Injury/Property Damage limit of not less than $1,000,000 each accident.
The policy shall cover liability arising from the operation of licensed vehicles by policyholder.
4.2.5 Professional Liability insurance may be made on a Claims Made form with limits not less than $1,000,000.
4.3 County and the members of Commissioners Court shall be named as additional insured to all required coverage except for Workers’ Compensation and Professional Liability (if required). All Liability policies including Workers’ Compensation written on behalf of contractor, excluding Professional Liability, shall contain a waiver of subrogation in favor of County and members of Commissioners Court.
4.4 If required coverage is written on a claims-made basis, contractor warrants that any retroactive date applicable to coverage under the policy precedes the effective date of the contract; and that continuous coverage will be maintained or an extended discovery period will be exercised for a period of two (2) years beginning from the time that work under the agreement is completed.
4.5 Builder’s Risk Insurance: Contractor is required to provide proof before a
Purchase Order is issued for this project and keep in full force and effect until the Transfer Date, Builders Risk Insurance, subject to policy terms and conditions, of direct physical loss or damage to property, materials, equipment and supplies which are to become an integral part of the Project, whether owned by Contractor, or subcontractors of every tier, and in which one or more of same has an insurable interest, while in transit, while at the Construction Site awaiting construction, during construction, and until the Transfer Date. Such insurance shall be maintained to cover, as nearly as practicable, the insurable value of such property, materials, equipment and supplies at risk, and shall contain a waiver of subrogation in favor of Contractor, Architect, subcontractors of any tier and Owner for loss or damage occurring during the Work and shall name Contractor as the named insured and Owner as additional insureds. All Builder's Risk Insurance proceeds shall be paid directly to the Contractor.
5.0 INDEMNIFICATION:
Respondent shall save harmless County from and against all claims, liability, and expenses, including reasonable attorney’s fees, arising from activities of respondent, its agents, servants or employees, performed under this agreement that result from the negligent act, error, or omission of respondent or any of respondent’s agents, servants or employees.
5.1 Respondent shall timely report all such matters to Fort Bend County and shall, upon the receipt of any such claim, demand, suit, action, proceeding, lien or judgment, not later than the fifteenth day of each month; provide Fort Bend County with a written report on each such matter, setting forth the status of each matter, the schedule or planned proceedings with respect to each matter and the cooperation or assistance, if any, of Fort Bend County required by Respondent in the defense of each matter.
5.2 Respondent's duty to defend, indemnify and hold Fort Bend County harmless shall be absolute. It shall not abate or end by reason of the expiration or termination of any contract unless otherwise agreed by Fort Bend County in writing. The provisions of this section shall survive the termination of the contract and shall remain in full force and effect with respect to all such matters no matter when they arise.
5.3 In the event of any dispute between the parties as to whether a claim, demand, suit, action, proceeding, lien or judgment appears to have been caused by or appears to have arisen out of or in connection with acts or omissions of Respondent, Respondent shall never-the-less fully defend such claim, demand, suit, action, proceeding, lien or judgment until and unless there is a determination by a court of competent jurisdiction that the acts and omissions of Respondent are not at issue in the matter.
5.4 Respondent's indemnification shall cover, and Respondent agrees to indemnify
Fort Bend County, in the event Fort Bend County is found to have been negligent for having selected Respondent to perform the work described in this request.
5.5 The provision by Respondent of insurance shall not limit the liability of
Respondent under an agreement.
5.6 Respondent shall cause all trade contractors and any other contractor who may have a contract to perform construction or installation work in the area where work will be performed under this request, to agree to indemnify Fort Bend County and to hold it harmless from all claims for bodily injury and property damage that arise may from said Respondent's operations. Such provisions shall be in form satisfactory to Fort Bend County.
5.7 Loss Deduction Clause - Fort Bend County shall be exempt from, and in no way liable for, any sums of money which may represent a deductible in any insurance policy. The payment of deductibles shall be the sole responsibility of Respondent and/or trade contractor providing such insurance.
6.0 PREVAILING WAGES:
This project is subject to the prevailing wage rate requirements of Chapter 2258 of the Government Code. All persons employed by Contractor shall be compensated at not less than the rates shown below. Contractor shall keep detailed records of each of its workers and said records shall be made available to County for inspection at all reasonable times. The Contractor shall pay Fort Bend County sixty dollars ($60.00) for each worker employed by the Contractor for the provision of services described herein for each calendar day or part of the day that the worker is paid less than the below stated rates. Contractors may also visit www.wdol.gov/dba.aspx.
General Decision Number: TX20260247 05/18/2026 Superseded General Decision Number: TX20250247
State: Texas Construction Type: Building
County: Fort Bend County in Texas.
BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).
Modification Number Publication Date 0 01/02/2026 1 05/18/2026
Rates Fringes
ASBE0022-009 07/01/2024
ASBESTOS WORKER/HEAT & FROST INSULATOR
(Duct, Pipe and Mechanical System Insulation) $ 30.20 12.38
BOIL0074-003 01/01/2025
BOILERMAKER $ 33.17 24.92
CARP0551-008 04/01/2025
CARPENTER (Excludes Acoustical Ceiling Installation, Drywall Hanging, Form Work and Metal Stud Installation) $ 33.27 9.73
ELEC0716-005 09/01/2025
ELECTRICIAN (Excludes Low Voltage Wiring and Installation of Alarms) $ 38.50 10.71
ELEV0031-003 01/01/2025
ELEVATOR MECHANIC $ 53.59 38.44
FOOTNOTES:
A. 6% under 5 years based on regular hourly rate for all hours worked. 8% over 5 years based on regular hourly rate for all hours worked.
B. Holidays: New Year's Day; Memorial Day; Independence Day; Labor Day; Thanksgiving Day; Friday after Thanksgiving Day; Christmas Day; and Veterans Day.
ENGI0450-002 04/01/2024
POWER EQUIPMENT OPERATOR
Cranes $ 39.47 10.39
IRON0084-002 06/01/2024
IRONWORKER (ORNAMENTAL AND STRUCTURAL) $ 28.26 8.13
PLAS0783-001 04/01/2023
PLASTERER $ 31.34 10.30
PLUM0068-002 10/01/2024
PLUMBER $ 39.98 11.61
PLUM0211-010 10/01/2025
PIPEFITTER (Including HVAC Pipe Installation) $ 42.09 12.96
SHEE0054-003 04/01/2020
SHEET METAL WORKER (Excludes HVAC Duct and Unit Installation) $ 29.70 13.85
SUTX2014-023 07/21/2014
ACOUSTICAL CEILING MECHANIC $ 16.41 3.98
BRICKLAYER $ 19.86 0.00
CAULKER $ 15.36 0.00
CEMENT MASON/CONCRETE FINISHER $ 13.82 0.00
DRYWALL FINISHER/TAPER $ 16.30 3.71
DRYWALL HANGER AND METAL STUD INSTALLER $ 17.45 3.96
ELECTRICIAN (Alarm Installation Only) $ 17.97 3.37
ELECTRICIAN (Low Voltage Wiring Only) $ 18.00 1.68
FLOOR LAYER: Carpet $ 20.00 0.00
FORM WORKER $ 11.87 0.00
GLAZIER $ 19.12 4.41
INSULATOR – BATT $ 14.87 0.73
IRONWORKER, REINFORCING $ 12.10 0.00
LABORER: Common or General $ 10.79 0.00
LABORER: Mason Tender – Brick $ 13.37 0.00
LABORER: Mason Tender - Cement/Concrete $ 10.50 0.00
LABORER: Pipelayer $ 12.94 0.00
LABORER: Roof Tearoff $ 11.28 0.00
LABORER: Landscape and Irrigation $ 9.49 0.00
LATHER $ 19.73 0.00
OPERATOR:
Backhoe/Excavator/Trackhoe $ 14.10 0.00
OPERATOR: Bobcat/Skid Steer/Skid Loader $ 13.93 0.00
OPERATOR: Bulldozer $ 20.77 0.00
OPERATOR: Drill $ 16.22 0.34
OPERATOR: Forklift $ 15.64 0.00
OPERATOR: Grader/Blade $ 13.37 0.00
OPERATOR: Loader $ 13.55 0.94
OPERATOR: Mechanic $ 17.52 3.33
OPERATOR: Paver (Asphalt, Aggregate, and Concrete) $ 16.03 0.00
OPERATOR: Roller $ 16.00 0.00
PAINTER (Brush, Roller and Spray), Excludes Drywall Finishing/Taping $ 16.77 4.51
ROOFER $ 15.40 0.00
SHEET METAL WORKER (HVAC Duct Installation Only) $ 17.81 2.64
SHEET METAL WORKER (HVAC Unit Installation Only) $ 16.00 1.61
SPRINKLER FITTER (Fire Sprinklers) $ 22.17 9.70
TILE FINISHER $ 12.00 0.00
TILE SETTER $ 16.17 0.00
TRUCK DRIVER: 1/Single Axle Truck $ 14.95 5.23
TRUCK DRIVER: Dump Truck $ 12.39 1.18
TRUCK DRIVER: Flatbed Truck $ 19.65 8.57
TRUCK DRIVER: Semi-Trailer Truck $ 12.50 0.00
TRUCK DRIVER: Water Truck $ 12.00 4.11
WATERPROOFER $ 14.39 0.00
WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.
Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at https://www.dol.gov/agencies/whd/government-contracts.
https://www.dol.gov/agencies/whd/government-contracts https://www.dol.gov/agencies/whd/government-contracts
Note: Executive Order 13658 generally applies to contracts subject to the Davis-Bacon Act that were awarded on or between January 1, 2015 and January 29, 2022, and that have not been renewed or extended on or after January 30, 2022. Executive Order 13658 does not apply to contracts subject only to the Davis-Bacon Related Acts regardless of when they were awarded. If a contract is subject to Executive Order 13658, the contractor must pay all covered workers at least $13.65 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract from May 11, 2026, through December 31, 2026. The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under Executive Order 13658 is available at www.dol.gov/whd/govcontracts.
Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR
5.5 (a) (1) (iii)).
The body of each wage determination lists the classifications and wage rates that have been found to be prevailing for the type(s) of construction and geographic area covered by the wage determination. The classifications are listed in alphabetical order under rate identifiers indicating whether the particular rate is a union rate (current union negotiated rate), a survey rate, a weighted union average rate, a state adopted rate, or a supplemental classification rate.
Union Rate Identifiers
A four-letter identifier beginning with characters other than SU , UAVG , SA , or SC denotes that a union rate was prevailing for that classification in the survey. Example: PLUM0198-005 07/01/2024. PLUM is an identifier of the union whose collectively bargained rate prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. The date, 07/01/2024 in the example, is the effective date of the most current negotiated rate.
Union prevailing wage rates are updated to reflect all changes over time that are reported to WHD in the rates in the collective bargaining agreement (CBA) governing the classification.
Union Average Rate Identifiers
The UAVG identifier indicates that no single rate prevailed for those classifications, but that 100% of the data reported for the classifications reflected union rates. EXAMPLE: UAVG-OH- 0010 01/01/2024. UAVG indicates that the rate is a weighted union average rate. OH indicates the State of Ohio. The next number, 0010 in the example, is an internal number used in producing the wage determination. The date, 01/01/2024 in the example, indicates the date the wage determination was updated to reflect the most current union average rate.
A UAVG rate will be updated once a year, usually in January, to reflect a weighted average of the current rates in the collective bargaining agreements on which the rate is based.
http://www.dol.gov/whd/govcontracts
Survey Rate Identifiers
The SU identifier indicates that either a single non-union rate prevailed (as defined in 29 CFR 1.2) for this classification in the survey or that the rate was derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As a weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SUFL2022-007 6/27/2024. SU indicates the rate is a single non-union prevailing rate or a weighted average of survey data for that classification. FL indicates the State of Florida.
2022 is the year of the survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination.
The date, 6/27/2024 in the example, indicates the survey completion date for the classifications and rates under that identifier.
SU wage rates typically remain in effect until a new survey is conducted. However, the Wage and Hour Division (WHD) has the discretion to update such rates under 29 CFR 1.6(c)(1).
State Adopted Rate Identifiers
The SA identifier indicates that the classifications and prevailing wage rates set by a state (or local) government were adopted under 29 C.F.R 1.3(g)-(h). Example: SAME2023-007 01/03/2024. SA reflects that the rates are state adopted. ME refers to the State of Maine. 2023 is the year during which the state completed the survey on which the listed classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. The date, 01/03/2024 in the example, reflects the date on which the classifications and rates under the SA identifier took effect under state law in the state from which the rates were adopted.
WAGE DETERMINATION APPEALS PROCESS
1.) Has there been an initial decision in the matter? This can be:
a) a survey underlying a wage determination
b) an existing published wage determination
c) an initial WHD letter setting forth a position on a wage determination matter
d) an initial conformance (additional classification and rate) determination
On survey related matters, initial contact, including requests for summaries of surveys, should be directed to the WHD Branch of Wage Surveys. Requests can be submitted via email to davisbaconinfo@dol.gov or by mail to:
Branch of Wage Surveys Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210
Regarding any other wage determination matter such as conformance decisions, requests for initial decisions should be directed to the WHD Branch of Construction Wage Determinations.
Requests can be submitted via email to BCWD-Office@dol.gov or by mail to:
Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210
2) If an initial decision has been issued, then any interested party (those affected by the action) that disagrees with the decision can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Requests for review and reconsideration can be submitted via email to dba.reconsideration@dol.gov or by mail to:
Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210
The request should be accompanied by a full statement of the interested party's position and any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.
3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:
Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210
7.0 PRE-RFQ CONFERENCE:
A Pre-RFQ conference will be conducted on Tuesday, November 10, 2026 at 9:00 AM (central). The pre-RFQ conference will be held at the Fort Bend County Purchasing Department located in the Travis Annex at 301 Jackson, Suite 201, Richmond, Texas 77469. All vendors are encouraged to attend. A site visit will commence after the conference, if necessary.
8.0 SCOPE OF WORK:
8.1 Vendor is to design, construct, and permit a 50’ x 100’ pre-engineered metal building on an existing site. the new building will include a large open work area, office, restroom and parts storage shelving. The project scope also includes all site utility connections. Detention has already been accounted for onsite. Contractor required to verify field conditions prior to construction.
Contractor to develop design, specifications and cost estimate within the established project budget for the above scope of work.
9.0 ESTIMATED BUDGET:
Estimated budget to complete this project is $520,000.
10.0 ESTIMATED SCHEDULE:
Advertisement begins: November 1, 2026 Pre-RFQ conference November 10, 2026 Deadline for questions: November 17, 2026 Responses due: November 24, 2026 Evaluation of Submissions: Week of December 6th Commissioners Court for permission to Negotiate: January 14, 2027 Final Contract Approval Commissioners Court: February 11, 2027
11.0 FORMAT OF RESPONSE, QUALIFICATIONS, AND EVALUATION
FACTORS:
11.1 Electronic Sealed Submission Requirements: Use Bonfire Portal Link https://fortbendcountytx.bonfirehub.com/portal/?tab=openOpportunities Click the help button provided in the Bonfire website as needed. Note that this is the preferred method of submission for all Fort Bend County Solicitations.
Submissions are required by RFQ opening time of 2:00 PM on the date specified.
11.2 Hard Copy Sealed Submission Requirements: To facilitate evaluation of submittals, one (1) original, Four (4) paper copies and one (1) electronic response on a flash drive is required. Flash drive must contain only one (1) file in PDF format and must match written/original/paper response identically. Failure to provide proper flash drive will result in disqualification.
11.2.1 Request for Qualifications must take the form of a bound 8-1/2-inch by
11-inch report with a Table of Contents and all pages numbered in sequence (maximum 25 pages). Binding must allow reports to lay flat when open and may be either wire or GBC. Format of the report may be either “portrait” or “landscape” format with binding on either long or short side.
11.3 Respondents are required to follow the outline below when preparing their submission. Tabs must be utilized to identify each section. (Tabs should be in the format of insertable binder tab dividers.)
Tab Title Title Page Letter of Transmittal Table of Contents https://fortbendcountytx.bonfirehub.com/portal/?tab=openOpportunities
Executive Summary 1 Understanding Scope of Work 2 Firm’s Experience 3 Staff Experience 4 Financial Stability 5 Firm’s Management Plan 6 Required forms (insurance, vendor forms, W9, debt form, and Stormwater Management Program form)
11.4 Executive Summary - This part of the response to the RFQ should be limited to a brief narrative highlighting the Respondent’s submission. Note that the executive summary should identify the primary contacts for the Respondent.
11.5 Respondents will be evaluated utilizing the factors, as weighted below:
Understanding Scope of Work (weight factor = 20%)
Tab 1 Understanding of Scope of Work: Parties demonstrate their ability to meet the required qualifications listed. In addition, describe how the services requested in this instrument will be provided and how they will be supported. Describe the approach your firm will take to the required collaboration, scheduling and coordination required for this project.
Firm’s Experience (weight factor = 35%)
Tab 2 Firm Experience with Projects of Similar Size and Complexity:
Such experience must be in the form of providing general contracting services for similar municipal/county government facilities. List a minimum of three (3) similar projects completed within the last ten (10) years; provide the name, location, and description of each project, completion date, final cost, the client, and a contact person and phone number. Provide organization chart under Tab for Firm Experience.
Staff Experience (weight factor = 25%)
Tab 3
Staff Experience with Projects of Similar Size and Complexity:
Such experience must be in the form of providing project management and construction services for similar facilities. List a minimum of three (3) similar projects completed within the last ten
(10) years; provide the name and location of each project, the client, and a contact person and phone number and completion date. In addition, provide resumes for project superintendent and project manager who will be assigned to this project.
Financial Stability (weight factor = 5%)
Tab 4
Complete and accurate responses to the following questions:
a. Has your Company ever failed to complete any work awarded to it in the last ten (10) years?
b. Are there any judgments, claims, arbitration proceedings or suits pending or outstanding against your Company or its officers in the last ten (10) years?
c. Has your Company filed any lawsuits or requested arbitration with regard to construction contracts within the last five (5) years? If yes, please provide details.
d. Does your company have the ability to obtain payment and performance bonds required for this project?
Firm’s Management Plan (weight factor = 10%)
Tab 5 Firm’s Management System, Software and Cost Control. Describe how the construction management services will be provided and how they will be supported.
Overall Completeness of Proposal (weight factor = 5%)
Tab 6 Required Proof of Insurance
Completed Respondent forms
Completed W9 form
Completed debt form
Completed Contractor Acknowledgement of Stormwater
Management Program form
12.0 SELECTION PROCESS:
Request for Qualifications will be evaluated by a committee comprised of County staff. The committee will review Request for Qualifications submitted and may develop a short list of not more than three (3) firms. These firms will be requested to submit additional information and may be invited to interview with the Committee. Based on further review after the interviews, the committee will forward their recommendations to the Fort Bend County Commissioners Court.
13.0 PERFORMANCE AND PAYMENT BONDS:
Performance and Payment Bonds: In the event the total accepted bid price exceeds $25,000 the Contractor must provide a payment bond in the amount of 100% of the total contract sum, and in the event the total accepted bid price exceeds $100,000 the contractor must also provide a performance bond in the amount of 100% of the total contract sum. Bonds must be submitted to the Office of the County Purchasing Agent within ten (10) calendar days after receipt of notification of bid award. Such bonds shall be executed by a corporate surety duly authorized and admitted to do business in the State of Texas and licensed in the State of Texas to issue surety bonds with a Best Rating of "A" or better. Fort Bend County reserves the right to accept or reject any surety company proposed by the Contractor. In the event Fort Bend County rejects, the proposed surety company, the Contractor will be afforded five (5) additional days to submit the required bonds issued by a surety company acceptable to Fort Bend County.
14.0 RETAINAGE:
Within thirty (30) days after receipt of each uncontested Application for Payment together with the supporting materials required, County shall advance to Contractor the uncontested amount requested in such uncontested Application for Payment, except five percent (5%) of the amount requested (hereinafter "Retainage") in each Application for Payment by County.
The Retainage withheld shall be released upon final completion of the entire Project and verification of satisfactory work performed, unless grounds exist for withholding payment on account of other defaults by Contractor, including services provided by its sub-contractors.
15.0 QUESTIONS:
Questions about this Statement of Qualification Package should be directed in writing via Bonfire only to Tyler Kendziora, Contracts Manager. Questions will be accepted until 9:00 AM CST, Tuesday, November 17, 2026.
16.0 STATE LAW REQUIREMENTS FOR CONTRACTS:
The contents of this section are required by Texas Law and are included by County regardless of content.
16.1 Agreement to Not Boycott Israel Chapter 2271 Texas Government Code:
Contractor verifies that if Contractor employs ten (10) or more full-time employees and this Agreement has a value of $100,000 or more, Contractor does not boycott Israel and will not boycott Israel during the term of this Agreement.
16.2 Texas Government Code Section 2251.152 Acknowledgment: By signature on vendor form, Contractor represents pursuant to Section 2252.152 of the Texas Government Code, that Contractor is not listed on the website of the Comptroller of the State of Texas concerning the listing of companies that are identified under Section 806.051, Section 807.051 or Section 2253.153.
17.0 ADDITIONAL REQUIRED FORMS:
All respondents submitting shall complete the attached and return with submission:
17.1 Current Proof of Insurance
17.2 Vendor Information Form
17.3 W9 Form
17.4 Tax Form/Debt/Residence Certification
17.5 Contractor Acknowledgement of Stormwater Management Program
18.0 EXHIBIT:
18.1 Building Plan
Form W-9 (Rev. March 2024) Department of the Treasury Internal Revenue Service
Request for Taxpayer Identification Number and Certification
Go to www.irs.gov/FormW9 for instructions and the latest information.
Give form to the requester. Do not send to the IRS.
Before you begin. For guidance related to the purpose of Form W-9, see Purpose of Form, below.
1 Name of entity/individual. An entry is required. (For a sole proprietor or disregarded entity, enter the owner’s name on line 1, and enter the business/disregarded entity’s name on line 2.)
2 Business name/disregarded entity name, if different from above.
3a Check the appropriate box for federal tax classification of the entity/individual whose name is entered on line 1. Check only one of the following seven boxes.
Individual/sole proprietor C corporation S corporation Partnership Trust/estate
LLC. Enter the tax classification (C = C corporation, S = S corporation, P = Partnership) Note: Check the “LLC” box above and, in the entry space, enter the appropriate code (C, S, or P) for the tax classification of the LLC, unless it is a disregarded entity. A disregarded entity should instead check the appropriate box for the tax classification of its owner.
Other (see instructions)
3b If on line 3a you checked “Partnership” or “Trust/estate,” or checked “LLC” and entered “P” as its tax classification, and you are providing this form to a partnership, trust, or estate in which you have an ownership interest, check this box if you have any foreign partners, owners, or beneficiaries. See instructions
4 Exemptions (codes apply only to certain entities, not individuals;
see instructions on page 3):
Exempt payee code (if any)
Exemption from Foreign Account Tax Compliance Act (FATCA) reporting code (if any)
(Applies to accounts maintained outside the United States.)
5 Address (number, street, and apt. or suite no.). See instructions. Requester’s name and address (optional)
6 City, state, and ZIP code
7 List account number(s) here (optional)
Part I Taxpayer Identification Number (TIN) Enter your TIN in the appropriate box. The TIN provided must match the name given on line 1 to avoid backup withholding. For individuals, this is generally your social security number (SSN). However, for a resident alien, sole proprietor, or disregarded entity, see the instructions for Part I, later. For other entities, it is your employer identification number (EIN). If you do not have a number, see How to get a TIN, later.
Note: If the account is in more than one name, see the instructions for line 1. See also What Name and Number To Give the Requester for guidelines on whose number to enter.
Social security number or
Part II Certification Under penalties of perjury, I certify that:
1. The number shown on this form is my correct taxpayer identification number (or I am waiting for a number to be issued to me); and
2. I am not subject to backup withholding because (a) I am exempt from backup withholding, or (b) I have not been notified by the Internal Revenue
Service (IRS) that I am subject to backup withholding as a result of a failure to report all interest or dividends, or (c) the IRS has notified me that I am no longer subject to backup withholding; and
3. I am a U.S. citizen or other U.S. person (defined below); and
4. The FATCA code(s) entered on this form (if any) indicating that I am exempt from FATCA reporting is correct.
Certification instructions. You must cross out item 2 above if you have been notified by the IRS that you are currently subject to backup withholding because you have failed to report all interest and dividends on your tax return. For real estate transactions, item 2 does not apply. For mortgage interest paid, acquisition or abandonment of secured property, cancellation of debt, contributions to an individual retirement arrangement (IRA), and, generally, payments other than interest and dividends, you are not required to sign the certification, but you must provide your correct TIN. See the instructions for Part II, later.
General Instructions Section references are to the Internal Revenue Code unless otherwise noted.
Future developments. For the latest information about developments related to Form W-9 and its instructions, such as legislation enacted after they were published, go to www.irs.gov/FormW9.
What’s New Line 3a has been modified to clarify how a disregarded entity completes this line. An LLC that is a disregarded entity should check the appropriate box for the tax classification of its owner. Otherwise, it should check the “LLC” box and enter its appropriate tax classification.
New line 3b has been added to this form. A flow-through entity is required to complete this line to indicate that it has direct or indirect foreign partners, owners, or beneficiaries when it provides the Form W-9 to another flow-through entity in which it has an ownership interest. This change is intended to provide a flow-through entity with information regarding the status of its indirect foreign partners, owners, or beneficiaries, so that it can satisfy any applicable reporting requirements. For example, a partnership that has any indirect foreign partners may be required to complete Schedules K-2 and K-3. See the Partnership Instructions for Schedules K-2 and K-3 (Form 1065).
Purpose of Form An individual or entity (Form W-9 requester) who is required to file an information return with the IRS is giving you this form because they
Cat. No. 10231X Form W-9 (Rev. 3-2024)
Employer identification number
Sign Signature of Here U.S. person
Pr in t o r t yp e.
Se e Sp ec ifi c In st ru ct io ns o n pa ge http://www.irs.gov/FormW9 http://www.irs.gov/FormW9
Job No.: RFQ _________
TAX FORM/DEBT/ RESIDENCE CERTIFICATION
(for Advertised Projects)
Taxpayer Identification Number (T.I.N.):
Company Name submitting Bid/Proposal:
Mailing Address:
Are you registered to do business in the State of Texas? Yes No
If you are an individual, list the names and addresses of any partnership of which you are a general partner or any assumed name(s) under which you operate your business
I. Property: List all taxable property in Fort Bend County owned by you or above partnerships as well as any d/b/a names. Include real and personal property as well as mineral interest accounts. (Use a second sheet of paper if necessary.)
Fort Bend County Tax Acct. No.* Property address or location**
* This is the property account identification number assigned by the Fort Bend County Appraisal District.
** For real property, specify the property address or legal description. For business personal property, specify the address where the property is located. For example, office equipment will normally be at your office, but inventory may be stored at a warehouse or other location.
II. Fort Bend County Debt - Do you owe any debts to Fort Bend County (taxes on properties listed in I above, tickets, fines, tolls, court judgments, etc.)?
Yes No If yes, attach a separate page explaining the debt.
III. Residence Certification - Pursuant to Texas Government Code §2252.001 et seq., as amended, Fort Bend County requests Residence Certification. §2252.001 et seq. of the Government Code provides some restrictions on the awarding of governmental contracts; pertinent provisions of §2252.001 are stated below:
(3) "Nonresident bidder" refers to a person who is not a resident.
(4) "Resident bidder" refers to a person whose principal place of business is in this state, including a contractor whose ultimate parent company or majority owner has its principal place of business in this state.
I certify that is a Resident Bidder of Texas as defined in Government Code [Company Name] §2252.001.
I certify that is a Nonresident Bidder as defined in Government Code [Company Name]
§2252.001 and our principal place of business is .
[City and State]
Created 05/12 krejcche Text Box mosestab Sticky Note Marked set by mosestab mosestab Sticky Note Marked set by mosestab
Mandatory Form
Contractor Acknowledgement of Storm Water Management Program
I hereby acknowledge that I am aware of the stormwater management program and standard operating procedures developed by Fort Bend County in compliance with the TPDES General Permit No.
TXR040000. I agree to comply with all applicable best management practices and standard operating procedures while conducting my services for Fort Bend County. I agree to conduct all services in a manner that does not introduce illicit discharges of pollutants to streets, stormwater inlets, drainage ditches or any portion of the drainage system. The following materials and/or pollutant sources must not be discharged to the drainage system as a result of any services provided:
1. Grass clippings, leaves, mulch, rocks, sand, dirt or other waste materials resulting from landscaping activities, (except those materials resulting from ditch mowing or maintenance activities)
2. Herbicides, pesticides and/or fertilizers, (except those intended for aquatic use)
3. Detergents, fuels, solvents, oils and/or lubricants, other equipment and/or vehicle fluids,
4. Other hazardous materials including paints, thinners, chemicals or related waste materials,
5. Uncontrolled dewatering discharges, equipment and/or vehicle wash waters,
6. Sanitary waste, trash, debris, or other waste products
7. Wastewater from wet saw machinery,
8. Other pollutants that degrade water quality or pose a threat to human health or the environment.
Furthermore, I agree to notify Fort Bend County immediately of any issue caused by or identified by:
(Company/Contractor) that is believed to be an immediate threat to human health or the environment.
Contractor Signature Date
Printed Name
Title
RESTRM.
OFFICE
A2.0
U
PF
IT
TI
N G
S H
O P
VE
H
IC
LE
M A
IN
TE
N A
N C
E
RI
CH
M
O N
D , T
EX
AS
AutoCAD SHX Text 1/8" = 1'-0"
AutoCAD SHX Text
BUILDING PLAN
AutoCAD SHX Text 8'-4"
AutoCAD SHX Text 8'-4"
AutoCAD SHX Text E
AutoCAD SHX Text A
AutoCAD SHX Text C
AutoCAD SHX Text D
AutoCAD SHX Text 100'-3"
AutoCAD SHX Text
(OUT TO OUT SLAB)
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text 25'-0"
AutoCAD SHX Text 25'-0"
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text 25'-0"
AutoCAD SHX Text 25'-0"
AutoCAD SHX Text B
AutoCAD SHX Text
%%UWAREHOUSE
AutoCAD SHX Text
(5,038 SQ.FT.)
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 50'-3"
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text 16'-8"
AutoCAD SHX Text 16'-8"
AutoCAD SHX Text 16'-8"
AutoCAD SHX Text
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text
(OUT TO OUT SLAB)
AutoCAD SHX Text 01c
AutoCAD SHX Text 12'-0"Wx14'-0"H
AutoCAD SHX Text
SECTIONAL O.H. DOOR
AutoCAD SHX Text
LAV.
AutoCAD SHX Text
HC
AutoCAD SHX Text T/W
AutoCAD SHX Text 1'-6"
AutoCAD SHX Text
SD
AutoCAD SHX Text
WC
AutoCAD SHX Text
HC
AutoCAD SHX Text
36"GB
AutoCAD SHX Text 1'-5"
AutoCAD SHX Text
TPH
AutoCAD SHX Text
42"GB
AutoCAD SHX Text 04c
AutoCAD SHX Text 12'-0"Wx14'-0"H
AutoCAD SHX Text
SECTIONAL O.H. DOOR
AutoCAD SHX Text 03c
AutoCAD SHX Text 02c
AutoCAD SHX Text
INSULATED STL. DOOR
AutoCAD SHX Text
IN MTL. BLDG. FRAME
AutoCAD SHX Text
CONC. LANDING
AutoCAD SHX Text (5'Dx6'W)
AutoCAD SHX Text
2% SLOPE
AutoCAD SHX Text
(MAX.)
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
BUILDING PLAN
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
DRAWN
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
ISSUED FOR:
AutoCAD SHX Text
REVISIONS:
AutoCAD SHX Text
AutoCAD SHX Text
JCPM
AutoCAD SHX Text
SCHEMATIC DESIGN
AutoCAD SHX Text
FBC-VM
AutoCAD SHX Text 09/23/2026
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
AutoCAD SHX Text 48"x108"
AutoCAD SHX Text
PALLET
AutoCAD SHX Text
RACK
| RFQ 27-012 |
| Richmond, TX 77469 Vehicle Maintenance Upfitting Building |
| Vendor Information Form.Updated.7.1.25.pdf |
| W9.Tax.SWMP.pdf |
| No Bid.Proposal.Qualifications Form.pdf |
| Sheet1 |
| No Bid.Proposal.Qualifications Form.pdf |
| Sheet1 |
| W9.Tax.SWMP.pdf |
| No Bid.Proposal.Qualifications Form.pdf |
| Sheet1 |
| No Bid.Proposal.Qualifications Form.pdf |
| Sheet1 |
| Building Plan 2026.pdf |
| Sheets and Views |
| Model |
| Legal Company Name top line of W9: |
| Business Name: |
| Age in Business: |
| CorporationLLC Sole ProprietorIndividual Partnership Tax ExemptFederal ID or SS: |
| Unique Entity ID: |
| CAGE NCAGE: |
| No: |
| Yes Ticker Symbol: |
| No Yes Ticker SymbolRemittance Address: |
| No Yes Ticker SymbolCityStateZip: |
| No Yes Ticker SymbolPhysical Address: |
| No Yes Ticker SymbolCityStateZip_2: |
| No Yes Ticker SymbolPhone Number: |
| No Yes Ticker SymbolEmail: |
| Certification: |
| Certification_2: |
| Certification_3: |
| Certification_4: |
| 1: |
| 2: |
| 3: |
| Exp Date 1: |
| Exp Date 2: |
| Exp Date 3: |
| Exp Date 4: |
| 500000: |
| 1700000022399999: |
| 22400000: |
| NAICs codes Please enter all that apply: |
| Signature of Authorized Representative: |
| ________: |
| Check Box7: Off |
| Check Box8: Off |
| Check Box3: Off |
| Check Box4: Off |
| Check Box9: Off |
| Check Box10: Off |
| 1 Name of entityindividual An entry is required For a sole proprietor or disregarded entity enter the owners name on line 1 and enter the businessdisregarded entitys name on line 2: |
| 2 Business namedisregarded entity name if different from above: |
| Individualsole proprietor: Off |
| C corporation: Off |
| S corporation: Off |
| Partnership: Off |
| Trustestate: Off |
| LLC Enter the tax classification C C corporation S S corporation P Partnership: Off |
| Other see instructions: Off |
| undefined: |
| Exempt payee code if any: |
| box for the tax classification of its owner: |
| Compliance Act FATCA reporting: |
| undefined_2: |
| 5 Address number street and apt or suite no See instructions: |
| 6 City state and ZIP code: |
| Requesters name and address optional: |
| 7 List account numbers here optional: |
| Social security number: |
| Signature of US person: |
| Text13: |
| Text14: |
| Text22: |
| Text23: |
| Text24: |
| Text25: |
| Text26: |
| Text1: |
| Text2: |
| Text3: |
| Text4: |
| Check Box5: Off |
| Check Box6: Off |
| Text7: |
| Text8: |
| Text9: |
| Text15: |
| Text10: |
| Text16: |
| Text11: |
| Text17: |
| Text12: |
| Text18: |
| Check Box18: Off |
| Check Box17: Off |
| Check Box19: Off |
| Check Box20: Off |
| Text19: |
| Text20: |
| Text21: |
| CompanyContractor: |
| Date: |
| Printed Name: |
| Title: |
File details come from the government source that posted it. Updated .