PWS v2.pdf

PDF 150 KB Posted

Attached to
Eaton Cutler Hammer Circuit Breaker
Solicitation number
N0018926QL124-0001
Issued by

About this file

This is a Performance Work Statement/Statement of Work for the acquisition of an emergency generator circuit breaker for Naval Computer and Telecommunications Station (NCTS) Sicily.

The contractor is required to provide a functional 2500-amp Eaton/Cutler Hammer 3-pole circuit breaker (Model MDSC253WEA, CAT# MDSC253WEA25MTCNAA6Y HNNAX) connected to Generator #5 at NCTS Sicily, NAS II Sigonella, and arrange shipping to the overseas location in Sigonella, Italy. Key performance objectives include providing the exact brand, part number, specification, and cost including overseas shipping. The contractor must thoroughly inspect the new circuit breaker before shipment. The period of performance begins immediately after award, with working hours of 0700-1600 Monday through Friday except federal holidays. The contractor is responsible for furnishing all labor, materials, tools, equipment, and replacement parts necessary to perform required tasks and repair the circuit breaker for all likely failure scenarios. Government quality assurance requires submission of a written report with shipped equipment, and all deliverables are subject to inspection, review, and acceptance by the Government. The contract may be cancelled with 30-day written notice, with payment limited to services received before termination. Points of contact include Contracting Officer Samantha Ballance and NCTS Sicily N4 Department Head ENS Maxwell Vargo.

View the file

Other files

File Type Posted
N0018926QL124-0003.pdf PDF
N0018926QL124-0002.pdf PDF
N0018926QL124-0001.pdf PDF
Brand Name Justification_Redacted.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

PERFORMANCE WORK STATEMENT/STATEMENT OF WORK

NCTS SICILY

EMERGENCY GENERATOR #5 OUTPUT CIRCUIT BREAKER Acquisition

1.0 INTRODUCTION: NCTS Sicily executes continuous operations to ensure access and superiority within the electromagnetic (EM) and cyberspace domains for U.S, NATO, and coalition forces operating in the U.S. European Command (EUCOM), U.S. Africa Command (AFRICOM), and

U.S. Central Command (CENTCOM) areas of responsibility.

2.0 BACKGROUND: Commander, Navy Information Forces (COMNAVIFOR) has ultimate ownership of standalone non-structural mission support equipment, which can include generators; UPS Systems; heating, ventilation and air conditioning (HVAC) and other critical electrical and mechanical systems that support the COMNAVIFOR mission.

The services provided by the contractor are a requirement for continuous operation of the site providing backup power via emergency generator to NCTS Sicily mission.

3.0 SCOPE OF WORK:

3.1 This PWS defines the requirements for a contractor to provide a functional 2500amp

Eaton/Cutler Hammer 3-pole circuit breaker (CB) connected to Generator #5 at Naval

Computer and Telecommunications Station (NCTS) Sicily, NAS II Sigonella and provide shipping to the location.

3.1.1 Performance Objectives:

3.1.1.1 Provide exact brand, Part and specification part

3.1.1.2 Provide Cost including shipping to the location.

3.1.2 The Contractor shall perform the following tasks:

3.1.2.1 Thoroughly inspect the new 2500-amp Eaton/Cutler Hammer circuit breaker before shipping it to the below mentioned location.

3.1.2.2 Provide the cost for shipping overseas.

3.2 Location of Performance

3.2.1 The site address for shipping is an OCONUS location and is as follows:

NCTS SICILY N68893

BLDG 452

STRADA STATALE 417

CATANIA GELA

SIGONELLA, ITALY IT

95040

Primary POC:

ENS Max Vargo

Email: nctsn43facilities_emergencypower@us.navy.mil

Tel: 011-39-095-86-2413

Cell: +1 (919) 302-9541

Secondary POC for

Logistics: LS1 Rio Wood rio.a.wood.mil@us.navy.mil

COMM: 011-39-095-86-6237

DSN:314-624-6036

3.3 Proposed Period of Performance

3.3.1 The Period of Performance for this contract is:

3.3.1.1 Immediately after award.

3.4 Location Work Hours

3.4.1 The working hours is 0700 – 1600, Monday through Friday, except for federal holidays.

3.5 Details of Required Services 3.5.1

Breaker Information:

Eaton Cutler-Hammer Magnum DS

MDSC253WEA Low Voltage Power CB

CAT# MDSC253WEA25MTCNAA6Y HNNAX

3.6 Government Furnished Material:

3.6.1 None

3.7 Contractor Furnished Material:

3.7.1 All labor, materials, tools, and equipment necessary to perform the required tasks.

3.7.2 All replacement parts required to repair the circuit breaker, anticipating all likely failure scenarios.

4.0 APPLICABLE DOCUMENTS

4.1 Instructions, regulations, and OEM manuals.

4.1.1 COMNAVIFOR 11311.1

5.0 Qualifications/Certifications

N/A

6.0 QUALITY CONTROL SURVEILLANCE PLAN (QASP)

6.1 Contractor Quality Control methods

6.1.1 The contractor will provide a written report with shipped equipment.

6.2 Government Quality Assurance

6.2.1 The performance and quality of work delivered by the contractor, including delivery services rendered and any documentation or written material compiled shall be subject to inspection, review, and acceptance by the Government.

7.0 CANCELLATION/OTHER CONDITIONS

7.1 This contract may be cancelled in whole or in part with a 30-day written notice from the

Contracting Officer. If this tasking is cancelled, the U.S. Government shall be liable only for payment of services received before the effective date of the termination.

7.2 The contractor must be aware of contingencies. Due to the emergent nature of exercise and real-world communications requirements and schedules, adjustments in the amount of labor, overtime and other resources needed to complete the task may be required.

8.0 BASE ACCESS/SECURITY

N/A

9.0 POINTS OF CONTACT

9.1 COR

9.1.1 TBD

9.2 KO

9.2.1 Samantha Ballance/ (564) 230-2642/ samantha.a.ballance.civ@us.navy.mil

9.3 NCTS Sicily N4 DH

9.3.1 ENS Maxwell Vargo/ 001-717-319-6200 /maxwell.b.vargo.mil@us.navy.mil

9.4 NCTAMSLANT N4 Facilities, Chief Engineer

9.4.1 Aaron Edwards / 757-400-9200 / aaron.t.edwards6.civ@us.navy.mil mailto:maxwell.b.vargo.mil@us.navy.mil

File details come from the government source that posted it. Updated .