PWS Traffic Light Repair 27 Jan 2026.pdf

Performance Work Statement for

Replace/Repair of Traffic Light Controls Arnold Drive/Canon Drive and Arnold Drive/Arkansas Drive

27 January 2026

1.0 Description of Services

1.1 Objective(s): This Performance Work Statement (PWS) describes the services required to provide all qualified personnel, labor, transportation, tools, equipment, materials and services required repair/replace the traffic light controls and cameras at the intersections of Arnold Drive at Cannon West and Arnold Drive and Arkansas on Little Rock AFB, AR 72099. The contractor shall accomplish all services below to meet the requirements of this Performance Work Statement (PWS) to include training of CE personnel on the system programming, use and maintenance. All work shall follow all Federal, State and local regulations, codes and the Manual on Uniform Traffic Control Devices (MUTCD). Work shall be accomplished within 30 days of material arrival. Estimated delivery date of material is required to be sent to the Contracting Officer and/or Government Representative within 15 days of contract award. These services require a fully operational traffic signal with camera switch for camera control at each intersection to be considered a complete project.

1.2 Benefit to United States Air Force (USAF): This acquisition will benefit the United States Air Force (USAF) and Little Rock AFB by safely controlling traffic flow across two busy intersections on the base.

1.3 Background: Both intersections are 4-way intersections with turn lanes. They both carry a large amount of traffic during the hours of 6 am to 5 pm. Coordination with Security Forces and the CES Electric Shop is required for safety of work and to redirect traffic if necessary.

1.4 Non-Personal Services: The Government will neither supervise contractor employees nor control the method by which the contractor performs the required tasks. It shall be the responsibility of the contractor to manage its employees and to guard against any actions that are of the nature of personal services or give the perception of personal services. If the contractor feels that any actions constitute, or are perceived to constitute personal services, it shall be the contractor’s responsibility to notify the Contracting Officer (CO) immediately. These services shall not be used to perform work of a policy/decision making or management nature, (e.g., inherently governmental functions). All decisions relative to programs supported by the contractor shall be the sole responsibility of the Government.

2.0 Service Summary: Not required

3.0 Government Property: Government property will not be provided in this contract.

4.0 Technical Requirements

4.1 Contractor Furnished Material: The contractor shall furnish the following parts/material in the quantities required to meet the requirement to replace damaged/failed and obsolete control systems and make them fully functional and able to accurately read traffic at a 4-way intersection:

4.1.1. For the intersection of Arnold Drive and Cannon West:

Currux all Weather Vision System or Equal to include:

SmartCity ITS Standard-Counts, Classification, Speed & Full actuation Advanced Traffic Analytics/SPM SDLC Module (CV-SDLC) NTCIP Module(CV-NTCIP) Axis M4318-PIVE Fixed Dome Camera Cudy 60 Watt POE injector 128-24-AL camera bracket T94T02D Pendant Kit (online Below) astro-brac pole bracket AS-3009-62-PNC 36-OS-AL; 36" Offset Alum Camera Mt 36" offset 88" OAL w/14" drop Outdoor Rated Cat 5 cable

4.1.2. For the intersection of Arnold Drive and Arkansas:

Currux all Weather Vision System or Equal to include:

SmartCity ITS Standard-Counts, Classification, Speed & Fullactuation Advanced Traffic Analytics/SPM SDLC Module (CV-SDLC) NTCIP Module(CV-NTCIP) Axis M4318-PIVE Fixed Dome Camera Cudy 60 Watt POE injector 128-24-AL camera bracket T94T02D Pendant Kit (online Below) Astro-brac pole bracket AS-3009-62-PNC 36-OS-AL; 36" Offset Alum Camera Mt 36" offset 88" OAL w/14" drop Outdoor Rated Cat 5 cable

4.1.3. Contractor is responsible for all material required to fulfill the PWS requirements.

Example, wiring, connectors, nuts/bolts, brackets, ground rods, cables etc. to install a fully operational system at each intersection.

4.1.4. Or Equal System: If the contractor decides to provide another brand of system, it must be compatible with the existing controls at the intersections above, it must be in similar design, it must be able to operate closed loop, it must be programmable by our technicians easily with training.

4.2 Installation Requirements:

4.2.1. Contractor shall remove or connect existing 4-camera system at each intersection to the new system, furnish and install new Currux System or equal set up, test and ensure system is fully operational. Contractor shall ensure all components and controls are fully grounded and prepared for any weather events (rain, snow, fog, low visibility, wind). Ability to detect and actuate based on vehicle class, buses or heavy trucks, cars, pedestrians and bikes.

4.2.2. Once the system is fully operational the contractor shall provide certified training (up to 20 personnel) in the programming, use, repair and maintenance of the Currux or equal system.

4.3 Contract Data Requirements List(s) (CDRL)

4.3.1. Contractor shall provide all technical instructions/schematics/drawings/operation and programming manuals for all the parts and operation of said equipment if available from the manufacturer for the government’s records.

4.3.2. Counterfeit Electronic Parts: The Contractor shall establish and maintain a counterfeit electronic part detection and avoidance system to mitigate the risk of counterfeit electronic (made in China electronic products) parts being installed in end items or otherwise entering the USAF/DoD inventory. Equipment furnished shall be a closed system not available to be wirelessly hacked into from outside overseas or in country sources.

4.4 Holidays and Facility Closings: Contractor/subcontractor personnel shall observe holidays and facility closings as authorized for government personnel. Contractor/subcontractor personnel shall only be permitted access to Government facilities when Government personnel are present.

5.0 General Information

5.1 Continuation of Mission-Essential Services During a Crisis: The Functional Commander/Director has determined these services are not mission-essential and will be delayed or not continue in the event of a crisis.

5.2 Security Requirements:

5.2.1 Security Regulations: The Contractor shall ensure personnel, information, system, property, facility and, if applicable, international security requirements are met. The Contractor shall ensure contractor/subcontractor personnel who perform work on a Government facility comply with the security requirements of the facility. All contractor personnel must possess a REAL ID or a US Government Passport to enter Little Rock AFB. No exceptions. To check to see if your personnel will clear Little Rock AFB security requirements you may email 19sfs.vcc.requests@us.af.mil and request a pass document. Once filled out it could take up to three duty days to receive clearance. Non-US Citizens must email and request a pass document, understanding that this could take up to 30 days for clearance. Make sure you follow the instructions provided.

5.2.2 Operations Security (OPSEC): The purpose of OPSEC is to reduce the vulnerability of USAF missions to adversary collection and exploitation of critical information. DoDD 5205.02E and DoD Manual 5205.02-M require contractors supporting DoD activities to use OPSEC to protect critical information for specified contracts, subcontracts, and information used in the performance of duties in support of Air Force requirements/missions. The Contractor shall ensure Contractor personnel who perform work on (or in) a Government facility comply with the OPSEC procedures and training requirements of the facility as specified in AFI 10-701.

5.2.3 Security Incident or Violation: The Contractor shall immediately notify the Government Security Office of any potential or actual security incident or violation.

5.2.4 Access to Government System(s): Access to Government computer system(s) will not be required to perform tasks under the contract/order.

5.2.5 Access to Government Facility or Military Installation: The Contractor shall ensure contractor/subcontractor personnel who require access to a Government facility or military installation comply with the security requirements of the facility or installation.

5.3 Environmental Management System (EMS): The services performed are not using hazardous materials therefore, the EMS requirement does not apply.

5.4 Agency Affirmative Procurement Programs: This acquisition does not require the purchase of Environmental Protection Agency (EPA)-designated products or United States Department of Agriculture (USDA)-designated products; therefore, the requirement does not apply.

5.5 Safety Requirements: The Government contracts on the understanding that the Contractor is complying with applicable laws concerning workplace safety.

5.5.1 The Contractor is subject to all citations and penalties for violation of applicable workplace safety laws. The burden of compliance rests with the Contractor. Enforcement of workplace safety laws is the responsibility of the agency specified in the applicable law.

5.5.2 The Contracting Officer may notify the Contractor of hazards in Contractor operations that endanger Government personnel or property and require appropriate action. This provision does not constitute assumption of liability for Occupational Safety and Health compliance on the part of the Government or negate other agency responsibility for enforcement of applicable laws.

5.5.3 Accident prevention principles must be thoroughly integrated into all operations. Unsafe conditions and practices, as identified by the designated representative, must be corrected immediately.

5.6 Verification of Services: All work shall be verified by a government representative to ensure services are in accordance with the requirements of this PWS and the traffic light controls are fully functional.

5.7 Trafficking in Persons: The Contractor shall comply in accordance with the FAR and applicable supplements and shall be in compliance with all applicable guidance and clauses listed in the contract as it relates to Trafficking in Persons. Additional information about Trafficking in Persons is available at the site for the Department of State’s Office to Monitor and Combat Trafficking in Persons. http://www.state.gov/j/tip

6.0 Warranty: Contractor shall guarantee all material, workmanship and labor from defects for a period of 12 months from the date of acceptance of the work. All material follows the manufacturer’s warranty or 12 months whichever is greater. A warranty letter detailing the work accomplished is required to be furnished to the government representative upon acceptance of the work.

7.0 Appendices

Appendix A: Commanders Environmental Commitment

Appendix B: Currux Vision SmartCity ITS System Overview

Appendix C: Axis-m4318 PLVE Panoramic Camera Data Sheet

Appendix D: Bent Metal 36-OS-AL Camera Mount Data Sheet

Appendix A: Commanders Environmental Commitment

Fully Integrated

AI Hardware / Software Solution for Vehicle, Pedestrian, Bicyclist Detection and Controller Actuation

Currux Vision’s Video Detection and Controller Actuation System works with existing or new video cameras (both IP and Analog) to detect vehicles, pedestrians and bicyclists on roads, bike lanes and crosswalks and to actuate traffic controllers, RSUs and flashing beacons using NTCIP, SDLC and I/O contact closures via 5 built in relays.

MADE IN

USA

currux.vision +1-713-955-6185 admin@curruxvision.com

Key Advantages:

Works with existing cameras IP or Analog, and new fisheye cameras

Significantly more accurate than legacy video detection and radar systems (shadows, glare, rain, snow, fog, low light, pole movement)

Best in class PED and BIKE detection and counting

95%+ vehicle counting accuracy

Built in software expansion modules for SPM, Signal Timing Optimization, Safety Analytics and Real Time Alerts

Vision Zero applications with controller and RSU actuations for PEDs in crosswalk, red light running, crosswalk violations

Powerful, reliable, hardened and small factor NEMA TS2 servers that are made in USA by Currux Vision

Very small footprint in the cabinet

(6.8”x6.0”x3.5” inches)

Easy to install and operate

Nationwide customer support and system integration infrastructure via local distributors

Designed Specifically for ITS Applications and Built in America AI GPU Hardware Platform

NEMA TS2 compliant hardware platform is built in Houston, Texas by Currux Vision.

IP addressable, hardened edge-based system that doesn’t require cloud access to operate.

Built in analog camera digital encoder, SDLC connector and 5 I/O relays.

AI-Based Detection and Actuation SystemAppendix B: Currux Vision SmartCity ITS System Overview http://currux.vision currux.vision +1-713-955-6185 admin@curruxvision.com

AI-Vision GPU Server

GPU

CPU

Memory

Storage

NVIDIA 512-Core Volta GPU with Tensor Cores

8-Core ARM v8.2 64-Bit CPU, 8 MB L2 + 4 MB L3

32 GB 256-Bit LPDDR4x Memory / 137 GB/s

32 GB eMMC 5.1

Interfaces

Ethernet

HDMI

Optional SDLC, BNC and I/O Relay

2 Ethernet (1GB/100 Base-T) RJ-45 Connector

1920x1080 to Video Monitor for setup

SDLC DB15 Connector; 4 BNC Analog Camera Inputs; 5 I/O Relays (NO/NC)

Specifications

Temperature

Power

Dimensions

-34* Celsius to + 74* Celsius

12 VDC - 10W/30W

6.75”(W)x6.0”(L)x3.5”(H)

Approvals

Industry Canada

(IC) CAN ICES-3(B)/NB<-2(B)

This device complies with part 15 of the FCC Rules

UL listed Product Logo for Jetson AGX Vavier Developer Kit, model name P2972

UL Recognized Component Logo for Embedded System Module, model number P2888 for Jetson AGX Xavier

This device complies with Industry Canada license-exempt RSS standart(s)

This device bears the CE mark accordance with following directives:

• Electromagnetic Compatibility Directive 2014/30/EU

• Low Voltage Directive 2014/35/EU

• RoHS Directive 2011/65/EU

Network

Ethernet

Protocols

Interoperability

Streaming Method

Max. User Acess

Edge Storage

Web Viewer

Web Language

RJ-45 (10/100Base-T)

IPv4, HTTP, RTSP/RTP/RTCP, TCP/UDP, 802&1x

ONVIF, CGI

Unicast

10 Users

Local PC for setup Mirco SD cards

<Edge, Chrome, Mozilla

English

AI-Based Detection and Actuation System

Appendix C: Axis-m4318 PLVE Panoramic Camera Data Sheet http://currux.vision

Datasheet

AXISM4318-PLVEPanoramicCamera

AXIS M4318-PLVE Panoramic Camera 12 MP dome with 360° view and deep learning

With a 12 MP sensor, this discreet mini dome offers excellent image quality and a complete 180° or 360° overview.

Featuring a stereographic lens and Sharpdome 360, it delivers greater sharpness at the edges of the image. Built-in IR illumination with individually controllable LEDs ensures clear, reflection-free footage and excellent image quality even in low light or complete darkness. A deep learning processing unit enables unique opportunities for analytics based on deep learning. Plus, AXIS Object Analytics can detect and classify humans, vehicles, and types of vehicles. Furthermore, Axis Edge Vault protects your Axis device ID and simplifies authorization of Axis devices on your network.

> Complete 180° and 360° overview > Built-in IR with individual IR LEDs > Support for deep learning analytics > Built-in cybersecurity features > Digital roll for ease of installation

Appendix C: Axis-m4318 PLVE Panoramic Camera Data Sheet

AXIS M4318-PLVE Panoramic Camera

Camera

Image sensor 1/2.3” progressive scan RGB CMOS Sensor native resolution 12MP

Lens Focal length: 1.2 mm, F2.2 Horizontal field of view: 182° Vertical field of view: 182° Fixed iris, IR corrected, fixed focus

Day and night Automatic IR-cut filter

Minimum illumination Color: 0.19 lux at 50 IRE, F2.2 B/W: 0.04 lux at 50 IRE, F2.2 0 lux with IR illumination on

Shutter speed 1/8100 s to 0.5 s

Camera adjustment Digital roll: ± 180°

System on chip (SoC)

Model

ARTPEC-8

Memory 2048 MB RAM, 8192 MB Flash

Compute capabilities Deep learning processing unit (DLPU)

Video

Video compression H.264 (MPEG-4 Part 10/AVC) Baseline, Main and High Profiles H.265 (MPEG-H Part 2/HEVC) Main Profile Motion JPEG

Resolution Overview: 2992x2992 to 160x160 Panorama: 3840x2160 to 192x72 Double Panorama: 3584x2688 to 512x288 Quad view: 3584x2688 to 384x288 View area 1-4: 2048x1536 to 256x144 Corner right and left: 3200x1200 to 192x72 Double corner: 2880x2880 to 384x288 Corridor: 2560x1920 to 256x144

Frame rate 360° overview only up to max resolution without WDR:

25/30 fps @ 50/60 Hz 360° overview and 4 dewarped views up to max resolution with WDR: up to 25/20 fps @ 50/60 Hz

Video streaming Multiple, individually configurable streams in H.264, H.265 and Motion JPEG Axis Zipstream technology in H.264 and H.265 Controllable frame rate and bandwidth

VBR/ABR/MBR H.264/H.265

Video streaming indicator

WDR

Forensic WDR: Up to 120 dB depending on scene

Noise reduction Spatial filter (2D noise reduction) Temporal filter (3D noise reduction)

Image settings Saturation, contrast, brightness, sharpness, local contrast, tone mapping, white balance, day/night threshold, exposure mode, exposure zones, compression, mirroring, dynamic text and image overlay, polygon privacy mask

Image processing Axis Zipstream, Forensic WDR, Lightfinder, OptimizedIR

Pan/Tilt/Zoom Digital PTZ of view areas, digital PT of panorama, corner, corridor and quad views, preset positions, guard tours

Audio

Audio features Network speaker pairing

Audio input/output Audio features through portcast technology: two-way audio connectivity, voice enhancer

Network

Network protocols IPv4, IPv6 USGv6, ICMPv4/ICMPv6, HTTP, HTTPS1, HTTP/ 2, TLS1, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, mDNS (Bonjour), UPnP®, SNMP v1/v2c/v3 (MIB- II), DNS/DNSv6, DDNS, NTP, NTS, RTSP, RTP, SRTP/ RTSPS, TCP, UDP, IGMPv1/v2/v3, RTCP, DHCPv4/v6, SSH, LLDP, CDP, MQTT v3.1.1, Syslog, Link-Local address (ZeroConf), IEEE 802.1X (EAP-TLS), IEEE 802.1AR

System integration

Application Programming Interface Open API for software integration, including VAPIX®, metadata and AXIS Camera Application Platform (ACAP); specifications at axis.com/developer-community.

One-click cloud connection ONVIF® Profile G, ONVIF® Profile M, ONVIF® Profile S, and ONVIF® Profile T, specification at onvif.org Support for Session Initiation Protocol (SIP) for integration with Voice over IP (VoIP) systems, peer to peer or integrated with SIP/PBX.

Video management systems Compatible with AXIS Camera Station Edge, AXIS Camera Station Pro, AXIS Camera Station 5, and video management software from Axis’ partners available at axis.com/vms.

Onscreen controls Privacy masks IR illumination Media clip

Event conditions Device status: above operating temperature, above or below operating temperature, below operating temperature, casing open, IP address removed, live stream active, network lost, new IP address, system ready, within operating temperature Edge storage: recording ongoing, storage disruption, storage health issues detected I/O: digital input is active, digital output is active, manual trigger, virtual input is active MQTT: stateless Scheduled and recurring: schedule Video: average bitrate degradation, day-night mode, tampering

Event actions Day-night mode: use while the rule is active I/O: toggle once, toggle while the rule is active Illumination: use lights, use lights while the rule is active Images: FTP, HTTP, HTTPS, SFTP, email and network share MQTT: publish Notification: HTTP, HTTPS, TCP and email Overlay text: use, use while the rule is active Recordings: record video, record video while the rule is active SNMP trap messages: send, send while the rule is active Status LED: flash, flash while the rule is active Video clips: FTP, HTTP, HTTPS, SFTP, email and network share WDR mode: set, set while the rule is active

Built-in installation aids Pixel counter, level grid, digital roll

Analytics

Applications Included AXIS Object Analytics, AXIS Image Health Analytics, AXIS Scene Metadata, AXIS Video Motion Detection, active tampering alarm Supported Support for AXIS Camera Application Platform enabling installation of third-party applications, see axis.com/ acap

AXIS Object Analytics Object classes: humans, vehicles (types: cars, buses, trucks, bikes) Scenarios: line crossing, object in area, crossline counting, occupancy in areaBETA Up to 10 scenarios Other features: triggered objects visualized with trajectories, color-coded bounding boxes and tables Polygon include/exclude areas ONVIF Motion Alarm event

AXIS Image Health Analytics Detection settings:

Tampering: blocked image, redirected image Image degradation: blurred image, underexposed image Other features: sensitivity, validation period

AXIS Scene Metadata Object classes: humans, faces, vehicles (types: cars, buses, trucks, bikes) Object attributes: vehicle color, confidence, position

1. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (openssl.org), and cryptographic software written by Eric Young (eay@cryptsoft.com).

https://www.axis.com/developer-community https://www.axis.com/developer-community https://www.onvif.org https://www.axis.com/vms https://www.axis.com/acap https://www.axis.com/acap

Approvals

Product markings CSA, UL/cUL, BIS, UKCA, CE, KC

Supply chain TAA compliant

EMC

EN 55035, EN 55032 Class A, EN 50121-4, EN 61000-6-1, EN 61000-6-2, EN 61547

Australia/New Zealand: RCM AS/NZS CISPR 32 Class A Canada: ICES-3(A)/NMB-3(A) Japan: VCCI Class A Korea: KS C 9835, KS C 9832 Class A USA: FCC Part 15 Subpart B Class A Railway: IEC 62236-4

Safety IEC/EN/UL 62368-1 ed. 3, CAN/CSA C22.2 No. 62368-1 ed. 3, IEC/EN 62471 risk group exempt, UN ECE R118, IS 13252

Environment

IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6,

IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-78,

IEC/EN 62262 IK10, IEC/EN 60529 IP66, ISO 4892-2,

NEMA 250 Type 4X, NEMA TS 2 (2.2.7-2.2.9), ISO 21207 (Method B)

Network

NIST SP500-267

Cybersecurity ETSI EN 303 645, BSI IT Security Label, FIPS-140

Cybersecurity

Edge security Software: Signed OS, brute force delay protection, digest authentication and OAuth 2.0 RFC6749 Client Credential Flow/OpenID Authorization Code Flow for centralized ADFS account management, password protection, Axis Cryptographic Module (FIPS 140-2 level 1), AES-XTS-Plain64 256bit SD card encryption Hardware: Axis Edge Vault cybersecurity platform Secure element (CC EAL 6+), system-on-chip security (TEE), Axis device ID, secure keystore, signed video, secure boot, encrypted filesystem (AES-XTS-Plain64 256bit)

Network security IEEE 802.1X (EAP-TLS, PEAP-MSCHAPv2)2, IEEE 802.1AE (MACsec PSK/EAP-TLS), IEEE 802.1AR, HTTPS/HSTS2, TLS v1.2/v1.32, Network Time Security (NTS), X.509 Certificate PKI, host-based firewall

Documentation AXIS OS Hardening Guide Axis Vulnerability Management Policy Axis Security Development Model AXIS OS Software Bill of Material (SBOM) To download documents, go to axis.com/support/ cybersecurity/resources To read more about Axis cybersecurity support, go to axis.com/cybersecurity

General

Casing IP66-, NEMA 4X- and IK10-rated Polycarbonate hard-coated dome Aluminum Color: white NCS S 1002-B Repaintable skin cover accessory

Mounting Mounting bracket with junction box holes (double-gang, single-gang, and 4” octagon) ¼”-20 UNC tripod screw thread

Power Power over Ethernet (PoE) IEEE 802.3af/802.3at Type 1 Class 3 Typical 6.4 W, max 12.95 W

Connectors Network: Shielded RJ45 10BASE-T/100BASE-TX PoE I/O: Terminal block for 1 supervised alarm input and 1 output (12 VDC output, max. load 25 mA) Audio: Audio and I/O connectivity via portcast technology

IR illumination OptimizedIR with power-efficient, long-life 850 nm IR LEDs Range of reach 15 m (49.2 ft) depending on the scene

Storage Support for microSD/microSDHC/microSDXC card Recording to network-attached storage (NAS) For SD card and NAS recommendations see axis.com

2. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (openssl.org), and cryptographic software written by Eric Young (eay@cryptsoft.com).

https://help.axis.com/axis-os-hardening-guide https://help.axis.com/axis-vulnerability-management-policy https://help.axis.com/axis-security-development-model https://www.axis.com/support/cybersecurity/resources https://www.axis.com/support/cybersecurity/resources https://www.axis.com/cybersecurity https://www.axis.com

Operating conditions -40 °C to 50 °C (-40 °F to 122 °F) Start-up temperature: -30 °C Humidity 10-100% RH (condensing)

Storage conditions -40 °C to 65 °C (-40 °F to 149 °F) Humidity 5-95% RH (non-condensing)

Dimensions Height: 70 mm (2.7 in) ø 149 mm (5.9 in) Effective Projected Area (EPA): 0.0076 m2 (0.025 ft2)

Weight 860 g (1.9 lb)

Box content Camera, installation guide, terminal block connector, connector guard, cable gaskets, cable hole lid, owner authentication key

Optional accessories AXIS T8415 Wireless Installation Tool, AXIS T94T02D Pendant kit, AXIS TM3814 Skin Cover Black, AXIS TM3204 Recessed Mount, AXIS TM3206 Recessed Mount, AXIS Mounts and Cabinets, AXIS Surveillance Cards For more accessories, go to axis.com/products/axis-m4318-plve#accessories

System tools AXIS Site Designer, AXIS Device Manager, product selector, accessory selector, lens calculator Available at axis.com

Languages English, German, French, Spanish, Italian, Russian, Simplified Chinese, Japanese, Korean, Portuguese, Polish, Traditional Chinese, Dutch, Czech, Swedish, Finnish, Turkish, Thai, Vietnamese

Warranty 5-year warranty, see axis.com/warranty

Part numbers Available at axis.com/products/axis-m4318-plve#part-numbers

Sustainability

Substance control PVC free, BFR/CFR free in accordance with JEDEC/ECA Standard JS709 RoHS in accordance with EU RoHS Directive 2011/65/ EU/ and EN 63000:2018 REACH in accordance with (EC) No 1907/2006. For SCIP UUID, see axis.com/partner.

Materials Renewable carbon-based plastic content: 29.6% (bio-based) Screened for conflict minerals in accordance with OECD guidelines To read more about sustainability at Axis, go to axis.

com/about-axis/sustainability

Environmental responsibility axis.com/environmental-responsibility Axis Communications is a signatory of the UN Global Compact, read more at unglobalcompact.org https://www.axis.com/products/axis-m4318-plve#accessories https://www.axis.com/products/axis-m4318-plve#accessories https://www.axis.com https://www.axis.com/warranty https://www.axis.com/products/axis-m4318-plve#part-numbers https://www.axis.com/products/axis-m4318-plve#part-numbers https://www.axis.com/partner https://axis.com/about-axis/sustainability https://axis.com/about-axis/sustainability https://www.axis.com/environmental-responsibility https://www.unglobalcompact.org

Dimension drawing

Highlighted capabilities

AXIS Object Analytics AXIS Object Analytics is a preinstalled, multifeatured video analytics that detects and classifies humans, vehicles, and types of vehicles. Thanks to AI-based algorithms and behavioral conditions, it analyzes the scene and their spatial behavior within – all tailored to your specific needs. Scalable and edge-based, it requires minimum effort to set up and supports various scenarios running simultaneously.

Axis Edge Vault Axis Edge Vault is the hardware-based cybersecurity platform that safeguards the Axis device. It forms the foundation that all secure operations depend on and offer features to protect the device’s identity, safeguard its integrity and protect sensitive information from unauthorized access. For instance, secure boot ensures that a device can boot only with signed OS, which prevents physical supply chain tampering. With signed OS, the device is also able to validate new device software before accepting to install it. And the secure keystore is the critical building-block for protecting cryptographic information used for secure communication (IEEE 802.1X, HTTPS, Axis device ID, access control keys etc.) against malicious extraction in the event of a security breach. The secure keystore and secure connections are provided through a Common Criteria or FIPS 140 certified hardware-based cryptographic computing module.

Furthermore, signed video ensures that video evidence can be verified as untampered. Each camera uses its unique video signing key, which is securely stored in the secure keystore, to add a signature into the video stream allowing video to be traced back to the Axis camera from where it originated.

To read more about Axis Edge Vault, go to axis. com/ solutions/edge-vault.

Lightfinder The Axis Lightfinder technology delivers high-resolution, full-color video with a minimum of motion blur even in near darkness. Because it strips away noise, Lightfinder makes dark areas in a scene visible and captures details in very low light. Cameras with Lightfinder discern color in low light better than the human eye. In surveillance, color may be the critical factor to identify a person, an object, or a vehicle.

OptimizedIR Axis OptimizedIR provides a unique and powerful combination of camera intelligence and sophisticated LED technology, resulting in our most advanced camera-integrated IR solutions for complete darkness. In our pan-tilt-zoom (PTZ) cameras with OptimizedIR, the IR beam automatically adapts and becomes wider or narrower as the camera zooms in and out to make sure that the entire field of view is always evenly illuminated.

Zipstream The Axis Zipstream technology preserves all the important forensic in the video stream while lowering bandwidth and storage requirements by an average of 50%. Zipstream also includes three intelligent algorithms, which ensure that relevant forensic information is identified, recorded, and sent in full resolution and frame rate.

For more information, see axis.com/glossary

© 2023 – 2025 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX are registered trademarks of Axis AB in various jurisdictions. All other trademarks are the property of their respective owners. We reserve the right to introduce modifications without notice.

www.axis.com T10175302/EN/M16.2/202507 https://www.axis.com/solutions/edge-vault https://www.axis.com/solutions/edge-vault https://www.axis.com/glossary

Bent Metal Works, Inc.

Hernando Beach, FL Bentmetalworksfl.com 407-267-9394

*Dimensions may vary +- 0.25”

✓ Constructed of 6000 Series Aluminum which is generally considered to be “Marine Grade”, Aerospace Grade”’ and “Automotive Grade” alloys.

✓ Tubes are constructed from Aluminum Alloy 6063-T4.

✓ Meets or exceeds UL Standard for Electrical Rigid Metal Conduit – Aluminum, UL 6A, File # E337297

✓ Trade Size: 1.5”

✓ Weight per 100: 887.0 pounds

✓ Nominal O.D. : 1.9 “

✓ Nominal Wall Thickness:

0.138 inches

MODEL # 36-OS-AL

Appendix D: Bent Metal 36-OS-AL Camera Mount Data Sheet gina.posey Highlight