PWS Tower Lease_Redacted.pdf
PDF 140 KB Posted
- Attached to
- D6 Boresight Tower Lease
- Solicitation number
- FA282325QA011
About this file
This Performance Work Statement outlines requirements for leasing space on a Crown Castle tower to support a boresight system at Test Site D-6 in Venice, FL. The lease duration is one base year with four one-year options.
The PWS specifies that the tower must be located between 1,600 feet and 3 miles from Test Site D-6's radar and telemetry systems, with clear line-of-sight. The tower must accommodate three antennas (telemetry boresight, radar boresight, and control radio) to be installed by USAF at 260' height on the southwest leg. Key requirements include space for a 4'x4'x6' equipment rack at the tower base, RF cable routing capability, and structural integrity for rigid antenna mounting. The USAF will provide and maintain the boresight system using Crown Castle approved installers, while Crown Castle will maintain the tower and provide inspection/acceptance. USAF is responsible for power and installation, with ground space provided for an electronics cabinet.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CLS_FA282325QA011.pdf | ||
| Tower Lease - NOCA_Redacted.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Performance Work Statement (PWS)
Leased space on Crown Castle tower to support Test Site D-6 Boresight system
1.0 Introduction
Test Site D-6 is currently under development in Venice FL. D-6 will house two instruments that require a boresight capability: radar and telemetry. Test Site D-6 is not large enough to locate a boresight tower on site, so other locations off site are required for the D-6 boresight system location. Due to power limitations the boresight has to be within 3 unobstructed miles of the RADAR and Telemetry source. The tower mounting location must provide a clear line-of-sight to the D-6 site, clear of any trees or other obstructions.
Duration of this lease is expected to be 1 base year and 4 one year options.
2.0 Requirements
A boresight tower location must be at least 1600 feet from the radar and telemetry systems at Test Site D-6, and no more than 3 miles from the site. The tower mounting location must provide a clear line-of-sight to the D-6 site clear of any trees or other obstructions.
3.0 Performance Requirements
• The D-6 boresight tower must provide mounting locations for 3 antennas:
1. Telemetry boresight antenna
2. Radar boresight antenna
3. Control radio antenna
• The United States Air force (USAF) will provide the Boresight system specifications to Crown Castle.
• There must be a suitable location at the base of the tower to locate a standard 4'x4'x6' foot equipment rack. The tower must also provide a clear route to run RF cables from this equipment rack to the antenna location on the tower. The tower must support RF cables from the equipment rack to each of the three boresight system antennas.
• The tower must be structurally sound and must provide a rigid mounting location for the boresight system antennas.
4.0 Special Requirements
• The USAF will provide the Boresight system to be installed on the tower and will use Crown Castle approved installers.
• Crown Castle will provide tower maintenance; USAF will provide boresight system maintenance.
• Crown Castle will provide inspection and acceptance.
• Three antennas will be installed on this tower by USAF, on the southwest leg of the tower at a height of 260’.
• Ground space will be provided for an electronics cabinet.
• USAF will be responsible for providing power and doing the installation.
• Notifications if any equipment is damaged.
File details come from the government source that posted it. Updated .