PWS N6116224RC007FR.pdf

PERFORMANCE WORK STATEMENT

Electronics Technician / Dye Penetrant NDI Tester

1.0 Introduction

1.1 The Ordnance Maintenance Division, Code 283, of the Navy Munitions Command Atlantic, Detachment Yorktown (DET YKTN), provides technical material support for Ship Defense and Operating Systems. Included in the material support are inventory management, handling, storage, and maintenance.

2.0 General Description

2.1 STANDARD SUPPORT - The contractor shall:

a. Utilize knowledge of electronic concepts, principles, practices, and techniques in the operation, troubleshooting, alignment, repair and maintenance of test systems necessary to support a full range of projects concerned with producing, overhauling, or testing of air launched weapons systems.

b. Independently provide technical guidance and technical assistance on assigned weapons systems.

Investigate, analyze and resolve problems pertaining to the repair of the weapon systems assigned.

c. Perform corrective and preventative maintenance, alignment, and calibration for automated test systems.

d. Perform modifications of test systems, subsystems, support equipment and software.

e. Have and maintain certification on dye penetrant testing as required by government-controlled specifications.

f. Perform dye penetrant testing on weapons systems using specialized equipment.

The support is required for 8 hours a day, 3 days a week, excluding Government holidays. The period of performance will be from 1 September 2024 through 31 August 2025.

2.2 The principal place of performance will be at the Navy Munitions Command Atlantic, DET YKTN located at the Naval Weapons Station in Yorktown, Virginia.

2.3 Help department with other duties as needed, such as clerical, administrative etc.

2.4 Personnel Qualifications. Personnel utilized by the contractor in the performance of these services shall, as a minimum, meet the experience, education, or other background requirements listed below and shall be fully capable of performing in an efficient, reliable, and professional manner. All employees of the contractor employed in the performance of work under this contract shall be employees of the contractor at all times and not employees of the Government. Although personnel utilized in the performance of these services shall be under the control and supervision of the Contractor, the employee will be working for and report to the NMCLANT DET YKTN, Ordnance Maintenance Division Electronics Technician Supervisor in performance of their duties.

3.0 Minimum Requirements

3.1 Must have knowledge of how to reduce complex interrelated technical engineering data to an assessable form, conduct subsequent analysis/ assessment, draw conclusions and make recommendations in a readily understandable form for systems with complex technical interfaces.

3.2 Must have knowledge of the concept, principles, practices and techniques involved in the operation, troubleshooting, alignment, repair and maintenance of the AN/DSM 156 and the AN/DSM 152.

3.3 Must have the ability to perform modifications of test systems, subsystems, support equipment and software.

3.4 A minimum of 10 years specialized experience related to electronics and electronic air launched weapons systems.

3.5 Must be qualified on day one for nondestructive testing and inspection in accordance with the National Aerospace Standard and the ANSI/ANST.

3.6 Must achieve and maintain a secret security clearance.

3.7 Must have the ability to work safely with Hazardous Materials in the performance of general duties.

4. Government Resources

4.1 The Government will provide any specialized training on its governing instructions, permit requirements, local procedures, or other applicable documents. The Government will provide a desk, small trucks and consumable materials required for directed operations.

4.2 Travel will not be required during the period of performance of contract.

4.3 There will be no telework for this position.

4.4 The contractor shall observe Government holidays as follows:

Name of Holiday Time of Observance

New Year’s Day 1 January

Martin Luther King Jr. Day 3rd Monday in January

President’s Day 3rd Monday in February

Memorial Day Last Monday in May

Juneteenth 19 June

Independence Day 4 July

Labor Day 1st Monday in September

Columbus Day 2nd Monday in October

Veteran’s Day 11 November

Thanksgiving Day 4th Thursday in November

Christmas Day 25 December

If any of the above holidays occur on a Saturday or Sunday, then such holiday shall be observed by the contractor in accordance with the practice as observed by Government employees.

4.5 It shall be the contractor’s responsibility to contact the Contracting Officer’s Representative if any contractor assigned to work at the Government facility will not be working a particular day as not to disrupt any work scheduled.