PWS_LTS - LAANG SIP TRUNKING - 13 Apr 23_version 3.pdf

PERFORMANCE WORK STATEMENT (PWS)

Local Telecommunication Services (LTS)

LA ANG SIP TRUNKING version 1

13 Apr 23 version 3

TABLE OF CONTENTS

1. INTRODUCTION

1.1. Objective

1.2. Background

2. SCOPE

2.1Outages

2.1.1. Scheduled Outage……………………………………………………………………………………….…..2

2.1.2. Unscheduled Outages

2.1.3. Outage Procedures

2.1.4. Outage Priority, Restoration of Service and Maintenance

2.1.4.1. Catastrophic Outage...........................................................………………………………………………...3

2.1.4.2. Emergency Outage…………………………………………………………………………………………3

2.1.4.3. Serious Outage……………………………………………………………………………………………..3

2.1.4.4. Routine Outage……………………………………………………………………………………………..3

2.2. Services Summary

2.2.1. Performance Requirements Summary……………………………………………………………………….4

2.2.2. Inspection…………………………………………………………………………………………………….4

2.2.3. Grade of Service……………………………………………………………………………………………...4

3. GOVERNMENT PROVIDED SPACE AND SERVICES…………………………………..…………………….5

3.1. Securing and Safeguarding

3.2. Rack Space

3.3. Environmental Controls

3.4. Wall Space

4. GENERAL REQUIREMENTS

4.1. Personnel

4.2. Interconnection Agreements, and Cutover Plans

4.2.1. Cutover Plan Content…………………………………………………………………………………….…..6

4.3. Safety, Health and Fire Protection Requirements

4.4. Manpower Reporting Billing and Service Reporting Requirements

4.4.1. Monthly Billing

4.4.2. Customer Service Records (CSR)

5. APPENDICES

APPENDIX 1 – SITE SPECIFIC REQUIREMENTS…

APPENDIX 2 - DEFINITIONS & ACRONYMS

APPENDIX 3 – PERFORMANCE REQUIREMENTS SUMMARY

MARAGGUN, JONATHAN L Lt Col USAF ANG 159 MSG/MSC Subparagraphs 2.1.1, etc.. Are not in TOC

SEARLS, ROBERT C SR TSgt USAF ANG 159 CF/SCXP Added to TOC

MARAGGUN, JONATHAN L Lt Col USAF ANG 159 MSG/MSC

2.1.1 not on TOC

SEARLS, ROBERT C SR TSgt USAF ANG 159 CF/SCXP Added to TOC

MARAGGUN, JONATHAN L Lt Col USAF ANG 159 MSG/MSC Not in TOC

SEARLS, ROBERT C SR TSgt USAF ANG 159 CF/SCXP Added

PWS for LTS – LAANG SIP TRUNKING_version 2

1. INTRODUCTION

1.1. Objective

This requirement will provide essential Local Telecommunication Services (LTS) and features supporting 259 ATCS England Air Park – Alexandria, LA Site specific equipment connectivity requirements are identified in Appendix 1, along with required features. This LTS will support the installation 24 hours a day/seven days a week/365 days a year (24/7/365).

1.2. Background

Historically, the 38th Contracting Squadron (38 CONS) acquired LTS on behalf of its customer sites using a Government-driven Statement of Work (SOW), which limited the contractor to providing services using legacy systems and equipment. LTS does not include long-distance or Defense Switching Network (DSN) services, which are beyond the scope of this action. Due to changes in technology, equipment, and processes, it has become evident that the Government should acquire these services in a performance based manner, consistent with the principles contained in Air Force Instruction (AFI) 63-138 “Acquisition of Services.” These services are considered Information Technology (IT) In accordance with (IAW) Defense Federal Acquisition Regulation Supplement (DFARS) 239.74 “Telecommunications Services.” The requirement herein represents the site’s performance-based requirements for local “dial-tone” and ancillary services as defined herein. As a part of the new process, the Air Force (AF) encourages the Contractor to identify or suggest improvements to existing LTS processes, operating procedures, systems, or applications to the Contracting Officer (CO).

2. SCOPE

The Contractor shall provide all labor, tools, facilities, materials, and services needed to perform and provide local access to the designated circuit demarcation point(s) identified in Appendix 1 to this PWS. These services shall include any equipment, wiring, or infrastructure to ensure the Contractor’s proposed solution is compatible with the Government’s current infrastructure without additional Government expense. Access to the local exchange shall also include operator assistance functions. These services shall not include residential or business services for non- Government entities or Government contractors. The Contractor shall follow all Federal Communications Commission (FCC), Public Utility Commission (PUC), Department of Defense (DoD), AF, and industry standards for this requirement.

The Contractor shall provide and install transmission equipment and cables for local exchange access and transport service circuits to the Government-provided floor space at the Government demarcation location(s) identified in Appendix 1. The Contractor shall connect to Government-provided power connection points and termination frames.

The Contractor shall coordinate with the Government Point of Contact (POC) (primary and alternate names, emails, and telephone numbers shall be provided by the Government

No later than (NLT) five days after contract award) prior to any installation. The Government does not authorize aerial cable installations.

2.1 Outages

2.1.1. Scheduled Outage. The Contractor shall notify the Government POC of any scheduled outage that will affect any telecommunication service. The Contractor shall inform the Government POC NLT 30 days prior to the scheduled outage. The Contractor shall provide a detailed explanation for the outage to include the amount of downtime and end users affected. The Contractor shall notify the Government POC via email of the need for any scheduled service outages.

Such outages shall be scheduled to minimize inconvenience to users. The Government POC must release all affected equipment and circuits prior to any service disruption. The Contractor shall follow procedures identified below for outages.

MARAGGUN, JONATHAN L Lt Col USAF ANG 159 MSG/MSC Use LTS in rest of documents since you already identified it in first paragraph.

SEARLS, ROBERT C SR TSgt USAF ANG 159 CF/SCXP Noted

MARAGGUN, JONATHAN L Lt Col USAF ANG 159 MSG/MSC Flush left with the rest of numbered paragraphs

SEARLS, ROBERT C SR TSgt USAF ANG 159 CF/SCXP Unable to fix indention

MARAGGUN, JONATHAN L Lt Col USAF ANG 159 MSG/MSC

2.1.1 not on TOC

Added to TOC

2.1.2. Unscheduled Outages. If multiple facilities, areas, primary trunks, or cables/fibers are impacted, the Government POC shall assign the category of the outage and establish the repair priority. The Contractor shall notify the Government POC verbally of problem(s) and follow-up with documentation via email within time specified for each outage type.

2.1.3. Outage Procedures. The Contractor shall follow procedures identified below for outages. In all cases, notification shall include:

• Reason for interruption;

• Duration;

• Start and stop times;

• Affected equipment, lines, and buildings; and

• Restoration action (what service was impacted and how service was restored)

2.1.4. Outage Priority, Restoration of Service, and Maintenance. The Contractor shall respond and restore service outages. From the time of receipt of the notification, the Contractor shall respond and coordinate with the Government POC within the time limits indicated below. For mission-essential functions, the Government POC shall identify and prioritize the essential contractor services. The Contractor shall prioritize and perform restorations IAW the Telecommunications Services Priority (TSP) and Restoration Priority List (RPL), which are provided by the Government POC. In the event that the Contractor anticipates not being able to perform any of the essential contractor services (i.e. beyond the Contractor’s control) IAW the TSP and RPL during a crisis situation, the Contractor shall notify the Government POC as expeditiously as possible and use its best efforts to cooperate with the Government in the Government’s efforts to maintain the continuity of operations. If the Government POC determines that the outage restoration time frames cannot be met for other non-mission essential functions, the Government POC can declare any outage restoration priority level as catastrophic to emergency to serious to routine if the outage significantly affects the mission of the Government.

2.1.4.1. Catastrophic Outage. A catastrophic outages demands immediate attention, such as a total loss of service, loss of network control, and loss of call processing capability to 95% or more of equipped lines and/or trunks. The Government POC can declare any outage as a catastrophic outage if the outage significantly affects the mission of the Government. A catastrophic outage is normally a sudden and widespread disaster stemming from the result of a man made or natural disaster in which property and site network infrastructure are completely destroyed. Restore service time will be determined from the time the Contractor responds to the Government’s notification IAW the local TSP and RPL requirements. The Contractor must advise the Government POC of their restoration procedures for the base in a catastrophic situation. The Contractor shall respond to the outage NLT one hour of receipt of notification by the Government POC and advise the Government POC of its restoration procedures for a catastrophic situation. The Contractor shall provide the Government POC with updates NLT every four hours on the status of restoration actions.

2.1.4.2. Emergency Outage. An emergency outage demands rapid action. The Government POC can declare any outage as an emergency outage if an outage significantly affects the mission of the Government. Emergency is defined by the Government as any outage that severely hampers the Air Force mission and can be restored within the restoration parameters. The Contractor shall respond to the outage NLT one hour of receipt of notification by the Government POC. The Contractor shall restore service NLT eight hours from the time the Contractor responds to the Government notification.

2.1.4.3. Serious Outage. A serious outage demands timely action, as such as degraded service or a fault condition that makes the system perform at a level less than that for which it is designed; condition discovered in automatic routing which has not shown in the operation of the equipment, but requires attention. The Government POC can declare any outage as a serious outage if an outage significantly affects the mission of the Government. The Contractor shall respond to the outage NLT one hour of receipt of notification by the Government POC. The Contractor shall restore service NLT 24 hours from the time the Contractor responds to the Government notification.

2.1.4.4. Routine Outage. A routine outage minimally disrupts service to property, equipment, and site infrastructure. The Government POC can declare any outage as a routine outage if an outage does not seriously affect the mission, but does hamper day- to-day operation of the Government installation. The Contractor shall respond to the outage NLT one hour of receipt of notification by the Government POC. The Contractor shall restore service NLT two calendar days from the time the Contractor responds to the Government’s notification.

2.2. Services Summary

2.2.1. Performance Requirements Summary

Performance Element Number

Performance Objective PWS Paragraph

Performance Threshold

1 Perform and provide local access at the designated circuit demarcation points identified in Appendix 1 to this PWS.

2 Continuous operation local phone service 24/7/365 with 99.9% availability

2 Inform the Government POC NLT 30 days in advance of scheduled outage providing a detailed explanation for the outage.

2.1.1 Timely and detailed

notification provided 100% of time

3 Responds and restores Catastrophic Priority service outages IAW PWS, TSP, and RPL as coordinated with the Government POC.

2.1.4 and 2.1.4.1

Timely response to notification and timely restoration of services provided 100% of the time

4 Respond and restore Emergency Priority service outages IAW PWS, TSP, and RPL as coordinated with the Government POC.

2.1.4 and 2.1.4.2

Timely response to notification and timely restoration of services provided 100% of the time

5 Respond and restore Serious Priority service outages IAW PWS, TSP, and RPL as coordinated with the Government POC.

2.1.4 and 2.1.4.3

Timely response to notification and timely restoration of services provided 100% of the time

6 Respond and restore Routine service outages IAW PWS, TSP, and RPL as coordinated with the Government POC.

2.1.4 and 2.1.4.4

Timely response to notification and timely restoration of services provided 100% of the time

2.2.2. Inspection. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. The Government has the right to inspect all services identified within the contract (SS and Non- SS items), to the extent practicable at all times and places during the term of the contract.

2.2.3. Grade of Service. Locations carrying contracted voice grade which is packetized for transport across an IP, MPLS, or other IXC system require grade of service (GoS), implemented as quality of service (QoS), to ensure that end-to-end per-call latency and packet jitter remain within ITU standards. This requirement is applicable to VoIP traffic, video traffic, or other real-time traffic that has been identified and contracted for an elevated GoS. Vendor will ensure QoS end to end including through sub-contracted external LEC/CLEC facilities; implementation strategies that may include Committed

MARAGGUN, JONATHAN L Lt Col USAF ANG 159 MSG/MSC 2.2.1…. not in TOCs

SEARLS, ROBERT C SR TSgt USAF ANG 159 CF/SCXP Added to TOC

This Performance Requirements Summary is diff than the one in App 3. If both are needed then re-name one.

PWS for LTS - LAANG SIP TRUNKING_version Page 7 of 29

Access Rates (CAR), Expedited Forwarding (EF), and traffic shaping determined by customer marked DSCP packets or pre-contracted data flows.

3. GOVERNMENT PROVIDED SPACE AND SERVICES

3.1. Securing and Safeguarding

The Contractor shall secure Government facilities, equipment, and materials before leaving a facility. The Contractor shall safeguard the Government provided facilities and material contained therein.

3.2. Rack Space

The Government will provide the necessary rack space, if needed, for the installation of the Contractor’s provided transmission equipment. The floor space shall be coordinated with the Government POC to accommodate Contractor-provided relay rack(s), at each demarcation point. Space is available for relay rack(s) for Contractor equipment in the demarcation point.

3.3. Environmental Controls

The Government will provide sufficient environmental controls to maintain humidity and temperature within the Contractor’s equipment operating specifications. In addition, the Government will provide primary and emergency conditioned power sources to operate the Contractor’s equipment within manufacturer’s specifications.

3.4. Wall Space

(259ATCS_ALEXANDRIA LA) The Government will also provide the necessary space, if needed, in B820 TR of wall space.

(236CBCS_HAMMOND LA) The Government will also provide the necessary space, if needed, in B1 TR of wall space.

(122ASOS_PINEVILLE LA) The Government will also provide the necessary space, if needed, in B556 TR of wall space.

4. GENERAL REQUIREMENTS

4.1. Personnel

The Contractor is solely responsible for ensuring sufficient personnel are assigned to this requirement. Appropriate personnel shall possess the qualifications and certifications to perform the requirements listed herein. These qualifications and certifications shall include those required by the Original Equipment Manufacturer (OEM) to maintain, install, and/or operate the equipment covered by this contract.

4.2. Interconnection Agreements, and Cutover Plans

In the event the award is made to a non-incumbent contractor, the incoming Contractor shall submit all Interconnection Agreements (IAs) via link, or as an addendum, to the Government with their quote. The addendum is not included in the technical quote and no page limitations apply to this submittal. Additionally, if providing a quote as a Competitive Local Exchange Carrier (CLEC) for any and/or all services, provide documented evidence of IAs and/or leasing agreements relevant to this effort.

For Government planning and funding purposes, the Contractor, as industry experts, is required to inform the Government of their anticipated cutover time frame. The Contractor shall develop and submit an Initial Cutover Plan to the Government with their technical quote. A Final Cutover Plan is required to be submitted NLT ten (10) working days

MARAGGUN, JONATHAN L Lt Col USAF ANG 159 MSG/MSC Needs to be flush left

Item will not go flush

PWS for LTS - LAANG SIP TRUNKING_version Page 8 of 29 after contract award. This plan shall include installation of the initial required services for cutover of LTS requirements, along with the recommended time frame to complete each phase of the cutover process. The Contractor shall coordinate deviations from the finalized Cutover Plan with the Government POC prior to any work commencing in the affected area. The Contractor shall ensure that all circuits, equipment, and service provided by the incumbent, under the prior contract, are disconnected/discontinued upon successful cutover. At this point, the Contractor shall inform the Government POC that the previous provider’s equipment is no longer needed and may be removed by the previous provider. Any omissions or discrepancies in the Cutover Plan does not relieve the Contractor of its responsibility to install, cutover, and perform all services identified in this requirement. It is the Contractor’s responsibility to resolve any issues associated with these efforts within a time agreed upon by the Government POC and the Contractor.

4.2.1. Cutover Plan Content. The Cutover Plan shall contain, at a minimum, the following site specific information:

a) Overview/Scope of plan, indicating proposed timeframe to complete cutover.

b) A detailed Implementation Plan in working days to complete requirements listed in PWS as site-specific (see

Appendix 1). The use of a Gantt or Milestone chart to illustrate your plan is suggested.

c) Conditions/Support required prior to the start of cutover;

d) A listing of Offeror responsibilities;

e) A listing of proposed Government responsibilities;

f) Key Departments essential to the Offeror’s Installation and Cutover Plan available to participate in routine progress meetings with the Government on a weekly or bi- weekly basis.

g) Key POC List for Contractor, Customer Site and Government Contracting Office must be included in the

Final Cutover Plan.

4.3. Safety, Health and Fire Protection Requirements

The Contractor shall follow local procedures established by the local safety and health offices. Reference the instructions in Code of Federal Regulations (CFR) 29, Part 1926.58, Appendix G for proximate to asbestos containing materials. The Contractor shall record and report to the CSO all available facts relating to each instance of accidental damage to Government property or injury to either Contractor or Government personnel.

4.4 Billing and Service Reporting Requirements.

The Contractor will establish a single Billing Telephone Number (BTN) or Account Telephone Number (ATN) for all awarded services. The same BTN/ATN will be utilized for any subsequent service changes as a direct result of any contract modification issued by the 159TH Mission Support Group Contracting office. All sub-accounts will be tied to main BTN/ATN. Contractor shall consider DoD installation sites as a campus environment where all services fall under one single BTN/ATN.

4.4.1 Monthly Billing.

The Contractor shall provide, upon request by authorized Government Contracting Officer Representative (COR) or 159CF/SCXP personnel, an electronic copy of the current and/or past months billing records for the period of performance of the contract. Billing format will show BTN/ATN, dates of service period, services provided, quantities, pricing for each tariffed service, taxes, fees, surcharge and any other applicable charges.

4.4.2 Customer Service Records (CSR).

The Contractor shall provide, upon request by authorized Government COR or 159CF/SCXP personnel, an electronic copy of the detailed CSR for the period of performance of the contract. CSR refers to the records a telecommunications carrier provides the DoD installation with pertinent information regarding a customer’s detailed account of telecommunication services. CSR shall provide the Universal Service Ordering Code (USOC) or a commercial contractor’s code in reference to specific services or equipment.

The Contractor CSR shall include, but not limited to;

4.2.1 is not in the TOC

SEARLS, ROBERT C SR TSgt USAF ANG 159 CF/SCXP Added

MARAGGUN, JONATHAN L Lt Col USAF ANG 159 MSG/MSC Not in TOC

Added in-place of Manpower Reporting

PWS for LTS - LAANG SIP TRUNKING_version Page 9 of 29

• Direct-In-Dial (DID) phone numbers that includes range for all associated NXXs Primary Interexchange Carrier (PIC) / Local Primary Interexchange Carrier (LPIC) designation

• Commercial Subscriber Lines (CSL) and associated features and functions per CSL

PIC/LPIC designation

• Local Exchange Primary Rate Interface (PRI) w/circuit ID(s) for each PRI

• Basic Rate Interface (BRI) w/circuit ID(s) for each BRI

• CENTREX numbers and associated features and functions per CENTREX number

PIC/LPIC designation

• Hotlines w/circuit ID(s)

• Local Exchange Access Analog Trunks w/circuit ID(s)

• Foreign Exchange Analog Trunks w/circuit ID(s)

• Foreign Exchange Digital Trunks w/circuit ID(s)

• Transport Channels w/circuit ID(s)

• Data Point-to-Point w/circuit ID(s)

• Circuit Extensions w/circuit ID(s)

• Diversity Routing w/circuit ID(s)

• Telephone Book Listings

Public Cross Reference Foreign Additional Non-Published

CSR shall be in a format compatible with basic text, MSWord, Excel, etc.

Contractor shall provide a web link to access USOC or commercial codes for validation of services by the COR or 38 CONs personnel.

SITE SPECIFIC REQUIREMENTS APPENDIX 1 – ALL LOCATIONS

5.1. Required Services and Features

The Contractor shall provide the following Government line of local commercial communications services at cutover.

Innovative technical solutions are encouraged but must be compatible with the current requirement that is listed in the remainder of this Appendix. The quantity of these initial service requirements will be incorporated into the Pricing Schedule. The installation service requirement will be identified here in Appendix 1 and in the Pricing Schedule.

(259ATCS_ALEXANDRIA LA) The Government telephone switching system is identified as an AVAYA/NORTEL CS1000E VoIP Hybrid Telephone System with Call Pilot voice mail and Telephony Manager with the 3621/5.0 – NORTEL COMMUNICATION SERVER 1000, and the switching system is located in B820 TR at 1403 FLOYD

ROGERSBLVD, ALEXANDRIA LA 71303.

(236CBCS_HAMMOND LA) The Government telephone switching system is identified as a AVAYA/NORTEL CS1000E VoIP Hybrid Telephone System with Call Pilot voice mail and Telephony Manager with the 3621/5.0 – NORTEL, COMMUNICATION SERVER 1000, and the switching system is located in B1 TR and 901 JUDGE

LEON FORD DR, HAMMOND LA 70401.

(122ASOS_PINEVILLE LA) The Government telephone switching system is identified as a Nortel Option 11 with the SOFTWARE version release 23. The switching system is located in 122ASOS (LAANG) Camp Beauregard, Bldg 556, PWS for LTS - LAANG SIP TRUNKING_version Page 10 of 29

9th Street, Pineville LA 71360-3759.

(159FW_NEW ORLEANS LA) The Government telephone switching system is identified as a AVAYA/NORTEL CS1000M VoIP Hybrid Telephone System with Call Pilot voice mail and Telephony Manager with the 3621/5.0 – NORTEL, COMMUNICATION SERVER 1000, and the switching system is located in B24 TR and 400 RUSSELL

AVE, B24 TR, NAS JRB NEW ORLEANS, NEW ORLEANS LA 70143-0027.

The Government Communication Services Officer (CSO) and Technical Representative shall be identified at the post award conference and updates provided to the contractor as required by the CO.

5.2. Direct-Inward-Dialing (DID) Directory Numbers. (259ATCS_ALEXANDRIA LA)

NPA- NXX-XXXX DID Directory Numbers

(318) 561-6581 to 6640 60

TOTAL 60

(236CBCS_HAMMOND LA)

(122ASOS_PINEVILLE LA)

NPA- NXX-XXXX DID Directory Numbers

(318) 641-5940 to 5999 60

(318) 641-5000 to 5039 40

TOTAL 100

(159FW_NEW ORLEANS LA)

NPA- NXX-XXXX DID Directory Numbers

(504) 391-7900 to 7919 20

(504) 391-8300 to 8699 400

(504) 433-8800 to 8899 100

(504) 433-8000 to 8099 100

TOTAL 620

5.3. Exchange and Access Lines.

5.3.1. Commercial Subscriber Lines. The number of Commercial Subscriber Lines (CSL) is: 3.

(259ATCS_ALEXANDRIA)

(NPA)-NXX-XXX

Type

Services and

Optional Features

Demarcation

Organization & End Demarcation

Location

(318) 442-4722 Analog BS, FR, Non-Public, Touch-Tone

BLDG 1107,

1100 Frank Andrews Blvd Alexandria, LA 71303

(FIXED TOWER)

BLDG 3007

3000 Mobile Tower Rd Alexandria, LA 71303

NPA- NXX-XXXX DID Directory Numbers 985-429-3200 To 3299 100

TOTAL 100

PWS for LTS - LAANG SIP TRUNKING_version Page 11 of 29

(318) 442-9641 Analog BS, FR, Non-Public, Touch-Tone

BLDG 1107,

1100 Frank Andrews Blvd

Alexandria, LA 71303

(318) 767-1473 Analog BS, FR, Non-Public, Touch-Tone

BLDG 1107,

1100 Frank Andrews Blvd

Commercial Subscriber Lines. The number of Commercial Subscriber Lines (CSL) is: 2. (236CBCS_HAMMOND LA)

End Demarcation

Location

(985) 345-2481

Analog BS, FR B22-1, 66 BLOCK 901 Judge Leon Ford

Hammond, LA 70401

(985) 345-3282

Analog BS, FR B22-1, 66 BLOCK 901 Judge Leon Ford

Hammond, LA 70401

Commercial Subscriber Lines. The number of commercial lines is: 2 (122ASOS_PINEVILLE LA)

(NPA)-NXX-XXX Qty &

Type Services and

Optional

End Demarcation

Location

(318) 641-0176 Analog Basic Services (BS) LAARNG COMM Bldg 420, Fl 2

CAMP

BEAUREGARD

PINEVILLE LA

71360-3759

122 ASOS, BLDG

556 9TH ST

CAMP

BEAUREGARD

(318) 641-0177 Analog Basic Services (BS) LAARNG COMM

Bldg 420, Fl 2

CAMP

BEAUREGARD

122 ASOS, BLDG

556 9TH ST

CAMP

BEAUREGARD

PWS for LTS - LAANG SIP TRUNKING_version Page 12 of 29

Commercial Subscriber Lines. The number of commercial lines is: 5 (159FW_NEW ORLEANS LA)

End Demarcation

Location

(504) 393-6723 Analog Basic Services (BS), CMD POST

159FW/CP

NAS JRB NEW

ORLEANS LA

400 Russell Ave. Bldg

285, New Orleans LA 70143-0027

159FW/CP

NAS JRB NEW

ORLEANS LA

400 Russell Ave. Bldg

285, New Orleans LA 70143-0027

(504)393-7128 Analog BS ACMI

159OG

NAS JRB NEW

ORLEANS LA

400 RUSSELL AVE

BLDG 285

NEW ORLEANS LA

70143-0027

159OG

NAS JRB NEW

ORLEANS LA

400 Russell Ave. Bldg

285, New Orleans LA 70143-0027

504-394-9474 Analog BS 159FW/CP

NAS JRB NEW

ORLEANS LA

400 Russell Ave. Bldg

285, New Orleans LA 70143-0027

159FW/CP

NAS JRB NEW

ORLEANS LA

400 Russell Ave. Bldg

285, New Orleans LA 70143-0027

504-391-8300 Analog BS 159FW/CP

NAS JRB NEW

ORLEANS LA

400 Russell Ave. Bldg

285, New Orleans LA 70143-0027

159FW/CP

NAS JRB NEW

ORLEANS LA

400 Russell Ave. Bldg

285, New Orleans LA 70143-0027

504-391-8301 Analog BS 159FW/CP

NAS JRB NEW

ORLEANS LA

400 Russell Ave. Bldg

285, New Orleans LA 70143-0027

159FW/CP

NAS JRB NEW

ORLEANS LA

400 Russell Ave. Bldg

285, New Orleans LA 70143-0027

5.3.2. Hot Lines.

(259ATCS_ALEXANDRIA LA)

Circuit ID (Name) Serving Demarcation Destination Demarcation

Estimated Mileage

Organization & Location

60.PLPC.502801

automatic ringdown

(E-911 CKT)

BLDG 820 BLDG 3007

(RADAR

SITE/MOBILE

TOWER)

1 259ATCS LA ANG

1403 FLOYD ROGERS

BLVD

ALEXANDRIA LA

71303

60.PLPC.502801

automatic ringdown

(E-911 CKT)

BLDG 820 BASE FIRE

STATION

1 259ATCS LA ANG

1403 FLOYD ROGERS

BLVD

PWS for LTS - LAANG SIP TRUNKING_version Page 13 of 29

5.4. Local Exchange and Access Trunks.

5.4.1. Local Exchange Access Analog Trunks. (259ATCS_ALEXANDRIA LA)

Circuit ID Qty & Type IC Channel Signaling:

Supervision, Addressing, Start

OG Channel Signaling:

Supervision, Addressing, Start

Demarcation

CITY DID 4, 4-Wire

(IC)

E&M Type 1, DTMF, WS, Hunting/Rollover Service, Touch- Tone

N/A BLDG 820

259ATCS LA ANG

1403 FLOYD

ROGERS BLVD

ALEXANDRIA LA

71303

City DOD 3, 2-Wire

(OG)

N/A E&M Type 1, DTMF, WS

BLDG 820

259ATCS LA ANG

1403 FLOYD

ROGERS BLVD

ALEXANDRIA LA

71303

City DID/DOD 1, 2-Wire (2-Way)

E&M Type 1, DTMF, WS

E&M Type 1, DTMF, WS

BLDG 820

259ATCS LA ANG

1403 FLOYD

ROGERS BLVD

Circuit ID

Qty & Type

IC Channel Signaling:

Supervision, Addressing, Start

OG Channel Signaling:

Supervision, Addressing, Start

Demarcation

985-345-8891 1, 2-wire, 2- Way

E&M, DTMF, GS E&M, DTMF, GS 901 Judge Leon Ford Hammond, LA 70401

985-345-5034 985-345-9724 985-345-9914

3, 2-Wire, Outgoing

N/A E&M , DTMF, WS 901 Judge Leon Ford Hammond, LA 70401

985-429-3200 4, 2-Wire Incoming, Hunting

E&M Type 1, DTMF, GS

N/A 901 Judge Leon Ford Hammond, LA 70401

Qty &

IC Channel Signaling:

OG Channel Signaling:

PWS for LTS - LAANG SIP TRUNKING_version Page 14 of 29

Supervision, Addressing, Start

Supervision, Addressing, Start

CITY DID

318.641.5940 DID #s: 1, 2, 3, 4

4, 2-wire

(IC) ,

Hunting Rollover

DTMF, Loop Dial Repeating, WS

N/A LAARNG COMM

Bldg 420, Fl 2

CAMP

BEAUREGARD

City DOD 318.641.1798 TRUNK #s: 3001, 3002, 3003

3, 2 Wire

(OG)

N/A Loop-Start, DTMF

LAARNG COMM

Bldg 420, Fl 2

CAMP

BEAUREGARD

City DID/DOD 318.641.1428

1, 2 Wire (2-Way)

DTMF, Ground Start

DTMF, Ground Start

LAARNG COMM

Bldg 420, Fl 2

CAMP

BEAUREGARD

(159FW_NEW ORLEANS LA)

Qty & Type IC Channel Signaling:

Supervision, Addressing, Start

OG Channel Signaling:

Supervision, Addressing, Start

Demarcation

CITY DID

5043918300

18, 2-wire

(IC)

Type1, DTMF (Loop dial repeating WINK Start DTMF)

N/A Bldg 30 400 Russell Ave.

New Orleans LA 70143-0027

City DOD 5043949474

22, 2-wire

(OC)

N/A Ground Start

DTMF

Bldg 30 400 Russell Ave.

New Orleans LA

5.4.2. Local Exchange Access Digital Trunks – NOT APPLICABLE.

5.4.1. Local Exchange Digital (ISDN Primary Rate Interface (PRI) Trunks/Enterprise Voice over Internet Protocol (EVoIP) – The 259 ATCS, 236 CBCS, 122 ASOS, 159 FW does not currently have PRI/EVOIP (SIP) Trunking installed; however, this service is now required on-site. Request that the vendor provide a PRI/EVOIP (SIP) Trunking solution and work in unisom with 159 CF Plans and Implementations office and 159 CF Infrastructure office in order to solidify a solution with pricing.

PWS for LTS - LAANG SIP TRUNKING_version Page 15 of 29

5.5. Foreign Exchange (FX) Lines/Trunks – NOT APPLICABLE.

5.5.1. Analog FX Line/Trunks – NOT APPLICABLE.

5.5.2. Foreign Exchange Digital Trunks – NOT APPLICABLE.

5.6. Transport Channels. (259ATCS_ALEXANDRIA LA)

Circuit ID/Name Type Demarcation Destination Estimated

Mileage Circuit

Description 60.PLXX.505151 Voice, Dry Pair

BLDG 820,

1403 Floyd Rogers Blvd Alexandria, LA

BLDG 1107,

1100 Frank Andrews Blvd

(FIXED TOWER)

0.5 Voice

60.PLXX.505152 Voice, Dry Pair

BLDG 820,

1403 Floyd Rogers Blvd

BLDG 1107,

1100 Frank Andrews Blvd

(FIXED TOWER)

0.5 Voice

60.PLPC.505677

(RAU Circuit)

Voice, 2-Wire

BLDG 3007

3000 Mobile Tower Rd

BLDG 1107,

1100 Frank Andrews Blvd

0.5 Voice

60.0SPC504038 – 44

Voice, 2-Wire

BLDG 820,

1403 Floyd Rogers Blvd

3000 Mobile Tower Rd

1 Voice

L1HCGS468909 T-1 BLDG 30

NAS JRB NEW

ORLEANS

BELLE CHASSE

LA 70143

BLDG 820,

1403 Floyd Rogers Blvd

Voice/Data

5.7. Data Point-to-Point Circuits NA.

5.8. Circuit Extension.

Circuit ID/Name Type Demarcation User’s Location Estimated Mileage

Circuit Description

(318) 442-4722

60PLPC502658MT

2-Wire, Voice

BLDG 1107,

1100 Frank Andrews Blvd

3000 Mobile Tower Rd

0.5 Voice Line

(318) 442-9641

60PLPC502660MT

2-Wire, Voice

BLDG 1107,

1100 Frank

BLDG 3007

PWS for LTS - LAANG SIP TRUNKING_version Page 16 of 29

(318) 767-1473

60PLPC502659MT

2-Wire, Voice

BLDG 1107,

1100 Frank

(318) 561-9710 (Monitors FAA Lines)

2-Wire, Voice

BLDG 1107,

1100 Frank

0.5 VOICE LINE

(Monitors other Lines)

5.9. Public Listings.

Description Qty

Public Listing, Government Section 1 Cross Reference Listing, Alphabetical Section 0 Additional Listings 0 Foreign Listing, Government Section 1

Description Qty Public Listing, Government Section 1

Cross Reference Listing, Alphabetical Section 0

Foreign Listing, Government Section 1

Public Listing, Government Section 1 Cross Reference Listing, Alphabetical Section 0

Foreign Listing, Government Section 0

Public Listing, Government Section 4 Cross Reference Listing, Alphabetical Section 0

Foreign Listing, Government Section 0

5.10. Telephone Directories.

Contractor shall provide a local telephone directory annually at award, and each subsequent year at the exercise of the option year.

Annotate the desired method of delivery you desire and delete the other two.

PWS for LTS - LAANG SIP TRUNKING_version Page 17 of 29

Local Telephone Directories .PDF electronic format (Adobe®). 5

Email address here: ROBERT.SEARLS.1@US.AF.MIL kip.guidry@us.af.mil

Local Telephone Directories Disc .PDF format (Adobe®). 5

Physical USPS mailing address here:

259ATCS, Bldg 820 1403 Floyd Rogers Blvd Alexandria LA 71303

Local Telephone Directories (Hard Copy – State how many hard copies required) 2

Physical USPS delivery address here:

259ATCS, Bldg 820 1403 Floyd Rogers Blvd Alexandria LA 71303.

Local Telephone Directories .PDF electronic format (Adobe®). 5 kenneth.dupuy.1@us.af.mil

Physical USPS mailing address here:

236CBCS, Building 1, 901 Judge Leon Ford Dr, Hammond LA 70401.

Local Telephone Directories (Hard Copy – State how many hard copies required) mailto:ROBERT.SEARLS.1@US.AF.MIL mailto:kip.guidry@us.af.mil mailto:ROBERT.SEARLS.1@US.AF.MIL mailto:kenneth.dupuy.1@us.af.mil

PWS for LTS - LAANG SIP TRUNKING_version Page 18 of 29

Physical USPS delivery address here:

236CBCS, Building 1, 901 Judge Leon Ford Dr, Hammond LA 70401.

Local Telephone Directories .PDF electronic format (Adobe®). 5 brittany.longmire@us.af.mil

Physical USPS mailing address here:

122 ASOS, BLDG 556, 556 9TH ST, CAMP BEAUREGARD

PINEVILLE LA 71360-3759

Local Telephone Directories (Hard Copy – State how many hard copies required)

Physical USPS delivery address here:

122 ASOS, BLDG 556, 556 9TH ST, CAMP BEAUREGARD

PINEVILLE LA 71360-3759

Local Telephone Directories .PDF electronic format (Adobe®). 5 sean.bauer.1@us.af.mil

Physical USPS mailing address here:

159 CF LA ANG, 400 Russell Ave B149 R106, NAS JRB New Orleans, LA 70143-

PWS for LTS - LAANG SIP TRUNKING_version Page 19 of 29

Local Telephone Directories (Hard Copy – State how many hard copies required) 2

Physical USPS delivery address here:

159 CF LA ANG, 400 Russell Ave B149 R106, NAS JRB New Orleans, LA

5.11. E911 Compatibility

The Contractor shall provide configuration diagrams to show access to 911 or enhanced 911 services, where available, through the local city or county emergency services organization. All 911 calls generated on-base and from commercial subscriber lines are set-up as the “speed call” list and route through local trunking to go directly off-base to the local 911 call center. Emergency service assistance shall be provided for the hearing impaired.

E911 Services. Requirement is two (2) CAMA trunks, two (2) ALI circuits, and other services/equipment required to support the transfer of E911calls from the local, vendor owned, Selective Router to the Base owned PSAP.

The Base will have Government Owned Operator Consoles to receive ANI/ALI and mapping; and a Government Owned Stand-alone ALI database for all on-base devices. The Base will provide database maintenance (i.e. update the ANI/ALI information) for all its DID/DSN numbers within the Government Owned ALI database. The Contractor shall provide E911 database maintenance for all commercial numbers (numbers not maintained by the Base).

The CAMA trunks will terminate at the Vendor’s Selective Router and the Base’s External CAMA converter. The ALI Circuits will terminate at the ILEC owned ALI Database and the Base owned ALI Database.

Description Quantity CAMA Circuits N/A

ANI, ALI, Circuit(s) N/A

NOTE: At this time, E911 services are not installed. All 911 calls are routed to the local Sheriff office.

5.12. Special Services

PWS for LTS - LAANG SIP TRUNKING_version Page 20 of 29

Examples of vendor circuit/trunk routing supporting Appendix 1 requirements are provided in the below diagrams 1 and 2. These examples apply to ANG and Government sites with switches and/or PBX configuration, for Traditional Legacy or SIP trunking delivery. The Carrier, if providing a CPE installed digital loop carrier system or other IP based CPE gateway system, will provide the customer with IP, VLAN, routing protocols or other pertinent information to allow the customer to logically interface with the carrier system. The customer owned demarcation device will in most cases consist of an Edge Boundary Controller providing isolation and firewall services. The vendor shall provide a 24/7 capability to monitor the IP connection to the customer gateway equipment and alert the customer to a link failure;

the customer must also have the ability to reach the vendor’s network operations center on a 24/7 basis.

5.13. Service Routing.

Contractor shall submit a service routing diagram (reference Appendix Diagrams 1 and 2 for examples) and/or service routing description in their technical quote. Contractor may provide the requested diagram and legend using these formats or a similar format to be in compliance with paragraph 4.3.1. Submission of a generic diagram or not explaining the service routing may be determined technically unacceptable.

Diagram 1

PWS for LTS LAANG SIP TRUNKING_version Page 21 of 29

TRADITIONAL LEGACY

Vendor / Incumbent Local Exchange Carrier (ILEC) / Competitive Local Exchange

Carrier (CLEC) Dial Central Office (DCO)

Off Premise

# of BRI and CSL

# of PRIs and DIDs

# of BRI and CSL

Off Govt Quarters

Apple

# of PRIs and DIDs Remote

GOVT

MDF

GOVT

SWITCH

Pump House

2 ‐

Alarm Main Site DCO 1234 AF Road, Any Base, USA

Voice Grade

Hotline

Police Dept

Medical Facility

4 ‐

Data Foreign

Exchange Trunk

Foreign City DCO 583 Claire Blvd

Outside Local LATA

PWS for LTS LAANG SIP TRUNKING_version Page 22 of 29

Diagram 2 UTILIZING

SIP TRUNKING

Note: The vendor controlled Customer Premise Equipment (CPE) shall be vendor provided. The EBC, if available, shall be Government provided.

VENDOR/LEC/ILEC

NETWORK

PRI

LEC Provided Multifunction Edge Router BRI

CPE (SIP)

GIG

Ether

Govt Provided Edge Boundary Controller

(if available)

Legacy Services & Equipment

Unified

Communications

IP Network

PWS for LTS LAANG SIP TRUNKING_version Page 23 of 29

APPENDIX 2 - DEFINITIONS & ACRONYMS

Table A. Definitions

TERM DEFINITION

Appendix 1 Defines the requirements detailing locations on circuit delivery.

Call Setup Success Rate

(CSSR)

The fractionalized amount of calls that make a successful connection to a dialed number, this is divided by the total number of calls placed. (As defined by International Telecommunication Union).

Circuit Termination Circuit termination at the Government installation includes the Main Distribution Frame (MDF) for analog signals, metallic cable pairs, Digital Signal Cross-Connect (DSX)-1 patch, cross connect panel(s) for T-1 and/or T-3 circuits, fiber optic patch and cross connect panels for optical interface equipment such as the optical carrier or SONET or MPLS systems, optical multiplexer equipment, and may extend to Cat 3/5/6 RJ-45 jack fields if directed by the Government POC to ensure adequate hand off of the circuit to the Government. Other wall-mounted, punch-down, terminal blocks are used for isolation and termination of Contractor metallic facilities.

Communications Focal Point (CFP)

A 24/7 Focal Point located on an Air Force Facility that provides one stop notification services and provides reporting and tracking of communications outages to Government users of the communication systems.

Commercial Subscriber lines (CSL)

A CSL is defined by Government standards as a voice grade subscriber line serving directly from the Contractor’s central office switch to customer’s location.

Competitive Local Exchange Carrier

(CLEC)

A telephone company that competes with the already established local telephone business by providing its own network and switching.

Contractor A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

PWS for LTS LAANG SIP TRUNKING_version Page 24 of 29

Customer Premise Equipment (CPE)

Also known as Customer-Provided Equipment is any equipment located at a subscriber's premises and connected with a carrier's telecommunication network at the contractually established demarcation point. The demarcation point contractually separates the customer equipment from the equipment located in either the distribution infrastructure or central office of the communications service provider. Vendor installed CPE devices are fully vendor owned, maintained, and monitored by the Vendor’s management platform. CPE equipment can be powered from the customer source electrical system, but a sufficient emergency power source must be available during periods of customer power interruption for any services contractually requiring a high level of reliability.

Customer Service Record

(CSR)

Report that details the fixed monthly charges billed by the local telephone company. The CSR is composed of computer codes called USOCs, which in turn correspond to a particular tariffed service.

Defective Service A service output that does not meet the standard of performance associated with the

PWS.

Deliverable Anything that can be physically delivered, but may include non- manufactured things such as meeting minutes or reports.

Dropped Call Rate (DCR) The fractionalized amount of calls that experience a lost connection after a successful initial call establishment. (As defined by International Telecommunication Union).

DS-1 A DS level and framing specification for synchronous digital streams, over circuits in the North American digital transmission hierarchy, at the DS1 transmission rate of 1,544,000 bits per second. DS1 is commonly used to multiplex 24 DS0 channels. Each DS0 channel, originally a digitized voice-grade telephone signal, carries 8000 bytes per second (64,000 bits per second). A DS1 frame includes one byte from each of the 24 DS0 channels and adds one framing bit, making a total of 193 bits per frame at 8000 frames per second. The result is 193*8000 = 1,544,000 bits per second.

PWS for LTS LAANG SIP TRUNKING_version Page 25 of 29

Edge Boundary Controller

(EBC)

A customer provided network node device that provides firewall, intrusion detection, routing, QoS, and packet equalization between the Vendors IP Wide Area Network and the interior customer IP network. The EBC will provide the logical demarcation point between IP SIP delivered services when applicable and will physically interface to the vendor’s CPE Gateway Router device.

Extended Area Calling Service

A geographic area beyond the local service area to which traffic is classified as local for selected customers, i.e., telephone service that allows subscribers in one exchange to call subscribers of another exchange without a toll charge or for a negotiated fixed rate.

Flat Rate A non-fluctuating monthly rate for telephone service in which an unlimited number of local calls can be made without further charge the extent of the contract. The monthly rate is established in the contract.

Government Emergency Telecommunications Service (GETS)

A White House-directed emergency phone service provided by the National Communications System (NCS) in the Cyber Security & Communications Division, National Protection and Programs of the Department of Homeland Security. GETS supports Federal, State, local, and tribal Government, industry, and non-Governmental organization (NGO) personnel in performing their National Security and Emergency Preparedness (NS/EP) missions. GETS provides emergency access and priority processing in the local and long distance segments of the Public Switched Telephone Network (PSTN). It is used in an emergency or crisis situation when the PSTN is congested and the probability of completing a call over normal or other alternate tele-communication means has significantly decreased. The servicing LEC must have NPA

(710) in the switch to allow access to the GETS line assigned to a specific site. Dialing 0/1+710-NXX-XXXX provides access to an emergency service for authorized users. The 710 NPA provides access to a tariffed service of the GETS interexchange carriers (AT&T, MCI WorldCom, and Sprint) and the call is billed to the U.S. Government. Web link: http://gets.ncs.gov/

Incumbent Local Exchange Carrier (ILEC)

The dominant phone carrier within a geographic area as determined by the FCC Section 252 of the Telecommunications Act of 1996 provided local exchange service to specific area.

http://gets.ncs.gov/

PWS for LTS LAANG SIP TRUNKING_version Page 26 of 29

Interconnection Agreement A business contract between telecommunication organizations for interconnecting their networks and exchanging telecommunication traffic. These agreements are present in both public switched telephone networks and the Internet.

Intra LATA Local toll service (also called intra-Local Access and Transport Area (LATA), local long distance, or regional toll service) provides calling within a geographic area known as a LATA. Per-minute toll charges usually apply to these calls.

Local Exchange Access and Service Areas

Areas shall include the areas/zones coverage as currently defined by the incumbent local service provider(s) and/or the State PUC for the Site and shall be applied under the scope of this contract and provide a list of these local exchange access service areas and any updates as they accrue. When the Contractor provides services to a Government installation, the LATA boundary shall not be limited or restricted to a Contractor’s service area. Connection to intra-LATA exchange areas and with inter-LATA exchange carriers is required.

Measured Rate A message rate structure in which the monthly phone line rental includes a fixed rate on calls within a defined area. Measured services are often charged on the number of calls, the time of day, the distance traveled and/or the length of the call.

Non-Recurring Charges A one-time fee IAW the established tariff rates at time of award that is associated with adding a local exchange service, including installment, activation and/or equipment.

Physical Security Actions that prevent the loss or damage of Government property.

Quality Assurance The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

Quality Control All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

Reliability The probability that a system will not fail during a specified period of time.

PWS for LTS LAANG SIP TRUNKING_version Page 27 of 29

Resilience The ability of a system to recover to its normal operating form after a failure or an outage.

Session Initiation Protocol (SIP)

A communications protocol for signaling, call setup/teardown, and communication of telephone and Video Real-Time Systems over an IP Based Unified Communication System. (As defined by Internet Assigned Numbers Authority & Request for Comments).

Session Initiation Protocol (SIP) Trunking

A Voice over Internet Protocol (VoIP) and streaming media service Based on the SIP by which Internet telephone service providers (ITSPs).

SIP Trunk An IP Based virtual connector between Unified Communication Systems designed to transport high-density unicast & multicast telephone/video traffic channels.

Traffic Analysis Inference of information from observable characteristics of data flow(s), such as the identities and locations of the source(s) and destinations(s), and the presence, amount, frequency and duration of occurrence.

TABLE B ACRONYMS:

ACRONYM EXTENDED

AF Air Force AFI Air Force Instruction BRI Basic Rate Interface BS Basic Services BTN Billing Telephone Number CSSR Call Setup Success Rate CFP Communications Focal Point CLEC Competitive Local Exchange Carrier CO Contracting Officer CPE Customer Premise Equipment CSL Commercial Subscriber Lines CSO Communications Services Officer DCO Dial Central Office DCR Dropped Call Rate DFARS Defense Federal Acquisition Regulation Supplement DID Direct In Dial DOD Department of Defense

PWS for LTS LAANG SIP TRUNKING_version Page 28 of 29

ACRONYM EXTENDED

DP Dial Pulse DSN Defense Switching Network DSX Digital Signal Cross-Connect DTMF Dual Tone Multi-Frequency EBC Edge Boundary Controller FCC Federal Communications Commission FD Full Duplex FR Flat Rate FX Foreign Exchange GETS Government Emergency Telecommunications Service GS Ground Start HD Half Duplex IAW In Accordance With IC Incoming ILEC Incumbent Local Exchange Carrier ISDN Integrated Services Digital Network IT Information Technology LATA Local Access Transport Area LS Loop Start LTS Local Telecommunications Services MF Multi-Frequency MDF Main Distribution Frame MR Measured Rate NCS National Communications System NS/EP National Security and Emergency Preparedness NGO Non-Governmental Organization NLT No Later Than OEM Original Equipment Manufacturer OG Outgoing POC Point of Contact PRI Primary Rate Interface PUC Public Utility Commission PWS Performance Based Work Statement PSTN Public Switched Telephone Network RPL Restoration Priority List SIP Session Initiation Protocol SS Services Summary TS Telecommunication Services TSP Telecommunications Services Priority WS Wink Start

PWS for LTS LAANG SIP TRUNKING_version Page 29 of 29

APPENDIX 3 – PERFORMANCE REQUIREMENTS SUMMARY

This PRS includes performance objectives the Government will use to determine contractor performance and will compare contractor performance to the Acceptable Quality Level (AQL).

Performance Objective

Performance Standard Acceptable Quality Levels (AQL)

Surveillance Method / By Whom

5.0 paragraph ref The contractor shall deliver 150kw generator to location specified in section 3 of PWS

100% One time inspection by COR

4.5.2 CSR Generator functions per

manufacturer specifications to provide backup power to Alert Facility

100% Weekly Inspection / COR (Power Production)

5.10 Directory The contractor shall deliver 1

copies of phone directory as specified in section 5.10 of PWS

100% Annual Delivery

Signed: