PWS LabView Software Support DPG 5-20-2025.pdf

LabVIEW Custom Software

PERFORMANCE WORK STATEMENT (PWS)

General Information

1. GENERAL: This is a non-personnel services contract to provide LabVIEW software and National Instruments hardware support. The Government shall not exercise any supervision or control over the contract service providers performing the services herein.

Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1 Description of Services/Introduction: The contractor shall provide supervisory control and data acquisition (SCADA) support services and expertise (software, hardware and instrumentation integration) including equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform LabVIEW software and National Instruments hardware support as defined in this Performance Work Statement except for those items specified as government furnished property and services. The contractor shall perform to the standards in this contract.

SCADA systems are crucial for our organization since they help to maintain efficiency, process data for smarter decisions, and communicate system issues to help mitigate downtime.

1.2 Background: The original LabVIEW software (version 3.0) was purchased in 1993 to support Test & Evaluation (T&E) at Dugway Proving Ground (DPG), West Desert Test Center (WDTC), and Data Sciences Division (DSD). Over the course of the last 30 years, LabVIEW software service contracts have been purchased by the government to keep the software at an updated level (currently version 2023). In addition, the government has purchased an enormous amount of National Instruments hardware, which interfaces directly with the National Instruments (now NI) LabVIEW software. When the Army promulgated its MS Windows 10 image, NI’s LabVIEW was the only instrument control software that was compatible with the image. This caused WDTC to migrate all test fixture control systems to NI hardware and LabVIEW software.

Meanwhile, WDTC continues to employ a variety of control hardware and software across the Test Center.

1.3 Objectives: The service objective is to provide qualified personnel to perform LabVIEW software and National Instruments hardware support and training.

1.4 Scope: The types of services to be performed are as follows:

● LabVIEW software support

● LabVIEW software training

● LabVIEW software development

● Software consulting

● System development

● National Instruments hardware consulting

Period of Performance: The period of performance shall be for one (1) Base Year of 12 months and four (4) 12-month option years. The Period of Performance reads as follows:

Base Year 01Oct2025 – 30Sep2026 Option Year I 01Oct2026 – 30Sep2027 Option Year II 01Oct2027 – 30Sep2028 Option Year III 01Oct2028 – 30Sep2029 Option Year IV 01Oct2029 – 30Sep2030

1.6 General Information

1.6.1 Quality Control: The contractor shall develop and maintain an effective Quality Control Program (QCP) to ensure services are performed in accordance with this PWS.

The government will develop the Quality Assurance Surveillance Plan (QASP) to verify the QCP is effective. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s QCP is the means by which he assures himself that his work complies with the requirement of the contract. The QCP will be delivered by email within 30 days after the contract award and 3 copies of a comprehensive written QCP shall be submitted to the KO and COR within 5 working days when changes are made thereafter. After acceptance of the QCP the contractor shall receive the contracting officer’s acceptance in writing of any proposed change to his QC system.

1.6.2 Quality Assurance: The government will develop the Quality Assurance Surveillance Plan (QASP) to verify the QCP is effective. The government shall evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan. This plan is primarily focused on what the Government must do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s).

1.6.3 Recognized Holidays: The contractor will only be required to work Holidays in an emergency situation.

New Year’s Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Thanksgiving Day Juneteenth Day Christmas Day Independence Day

1.6.4 Hours of Operation: The contractor is responsible for conducting business, between the hours of 0700 – 1730 (MT) Monday thru Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. For other than firm fixed price contracts, the contractor will not be reimbursed when the government facility is closed for the above reasons. The Contractor must at all times have the available and certified personnel for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential. The contractor may also be required to work outside of these hours in an emergency situation.

1.6.5 Place of Performance: The work to be performed under this contract will be performed at either the contractor facility or DPG government facilities. All work performed will be unclassified.

1.6.6 Type of Contract: The government will award a Time and Materials type contract.

1.6.7 Security Requirements:

1.6.7.1 PHYSICAL Security: The contractor shall be responsible for safeguarding all government equipment, information and property provided for contractor use while these items are in their possession. At the close of each work period, government facilities, equipment, and materials shall be secured.

1.6.7.2 Issuance of Government Property for Contractor Use: The Contractor shall be issued the necessary items to complete their duties at the beginning of the work period.

Subsequently, upon completion of their duties the Contractor will return those items to the Government to be secured.

1.6.7.3 Key, key cards, lock combinations and/or passcodes: The Contractor shall not be issued keys, key cards, lock combinations, cypher codes and/or passcodes.

1.6.7.4 AT Level I training: All contractor employees, to include subcontractor employees, requiring access Army installations, facilities and controlled access areas shall complete AT Level I Awareness training within 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable. The contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee, to the COR or to the contracting officer, if a COR is not assigned, within 45 calendar days after completion of training by all employees and subcontractor personnel. AT level I Awareness training is available at the following website: http://jko.jten.mil.

1.6.7.5 Access and general protection/security policy and procedures: Contractor and all associated subcontractor employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Operations or Security Office. Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204‐9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any http://jko.jten.mil/ individual facility or installation change, the Government may require changes in contractor security matters or processes.

1.6.7.6 iWatch training: The contractor and all associated sub‐contractors shall brief all employees on the local iWATCH Army program (training standards provided by the requiring activity ATO). This local developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR. This training shall be completed within 30 calendar days of contract award and within 30 calendar days of new employees commencing performance with the results reported to the COR NLT 45 calendar days after contract award.

1.6.7.7 Army Training Certification Tracking System (ATCTS) registration: All contractor employees with access to a Government info system must be registered in the ATCTS (Army Training Certification Tracking System) at commencement of services and must successfully complete the DOD Information Assurance Awareness prior to access to the information system and then annually thereafter.

1.6.7.8 OPSEC training: Per AR 530‐1, Operations Security, the contractor employees must complete Level I OPSEC Awareness training. New employees must be trained within 30 calendar days of their reporting for duty and annually thereafter.

1.6.7.9 IA/IT training: All contractor employees and associated subcontractor employees must complete the DoD IA awareness training before issuance of network access and annually thereafter. All contractor employees working IA/IT functions must comply with DoD and Army training requirements in DoDD 8570.01, DoD 8570.01‐M and AR 25‐2 within six months of appointment to IA/IT functions.

1.6.7.10 IA/IT certification: Per DoD 8570.01‐M , DFARS 252.239.7001 and AR 25‐2, the contractor employees supporting IA/IT functions shall be appropriately certified upon contract award. The baseline certification as stipulated in DoD 8570.01‐M must be completed upon contract award.

1.6.7.11 Controlled Unclassified Information (CUI): All contractor employees will comply with the Defense Federal Acquisition Regulation Supplement (DFARS) clause 252.204-7012 and the National Institute of Standards and Technology (NIST) SP 800- 171.

1.6.7.12 Threat Awareness Reporting Program (TARP): Contractor employees must receive annual TARP training.

1.6.8 Qualifications:

1.6.8.1 Software Development, Hardware support, Training

1.6.8.2 The Contractor must be a National Instruments Alliance Partner (NI and their Technicians have all the below certifications) with at least 5 Certified LabVIEW

Architect’s (CLA) and Certified LabVIEW Developer’s (CLD) on staff in order to handle short notice assistance and consultation with WDTC instrumentation personnel in support of Test Programs being conducted at WDTC. The Contractor must also have a Value- Added Reseller (VAR) contract with National Instruments. The Contractor must have both Project Management and Technician capabilities in order to assist DPG personnel.

The Contractor must also have on staff a NI Certified Professional Instructor (CPI) for future training courses to be conducted at DPG. The Contractor must be available on short notice (within 1 day) to respond to emergent test situations or consultation requirements. These requirements of this paragraph will be verified by the Government technical expert and the Contracting Officer’s Representative (COR) prior to commencement of duties.

The Contractor must have a familiarity and experience with developing LabVIEW programs for Chemical Agent and Biological based test solutions, Army Test Communications Networks, Chambers, Field Testing, Wind Tunnels, and the ability to adapt to unique Army Test and Evaluation requirements in terms of Software Development, Hardware and test infrastructure control and Data Acquisition. The Contractor must have expertise in a wide range of NI technologies. The following are examples, but not limited to: CompactRIO (cRIO), CompactDAQ (cDAQ), motion, video, Opto22 OPC and LabVIEW communications, EthernetRIO, EtherCAT, Modbus, FPGA programming, and serial communications. The Contractor must have the ability to interface with National Instruments on a deeper Technical level than WDTC’s current NI training contract in order to facilitate fixes and programming solutions on unique software/hardware problems encountered while installing and operating NI hardware, third party hardware and developing LabVIEW software.

1.6.8.3 The contractor will assist WDTC Instrumentation personnel in learning, developing, and deploying LabVIEW software and NI hardware in a variety of architectures, with the aim of increasing WDTC Instrumentation technicians LabVIEW development skills and knowledge.

1.6.8.4 The contractor shall ensure conformance to statutes and laws; Government regulations, policies and procedures; industry best practices. The contractor shall report existing and/or potential organizational Conflicts of Interest (COI).

1.6.8.5 The contractor shall be tasked to provide a CPI (Certified Professional Instructor) in Certified LabVIEW courses to be conducted at DPG. These formal training courses will be set up at times mutually beneficial to both the Government and Contractor. The contractor will also provide copies of the training material, either hard copy or electronic media (DVD). Contract Data Requirements List covered on section 7.0 ATTACHMENT/TECHNICAL EXHIBIT LISTING 1, 2 and 3 CDRL 1

1.6.8.6 The contractor shall be tasked to provide various levels of assistance in terms of Software development and technical services in support of test programs that will vary (to include overall expertise and engineering support, training, development assistance etc.) dependent on level and amount of workload in WDTC. A normal level of assistance to Instrumentation personnel would be consultation and training in software development and hardware expertise, but dependent on workload, the Contractor might be tasked with providing the majority of the Software development and Hardware installation for certain test programs. If this occurs, the Contractor will work closely with Instrumentation personnel to ensure their familiarity with the installed hardware and LabVIEW programming so that Government personnel can facilitate repairs and maintenance. The Contractor will develop Software code in conformance with WDTC data collection standards in order to alleviate confusion and utilize NI hardware compatible with NI hardware already in use at DPG WDTC, unless test requirements dictate otherwise, which then WDTC personnel will be trained to use. When the Contractor is tasked with Developing software for WDTC test programs independent of WDTC government Instrumentation personnel due to WDTC workload, all Software development and Hardware integration will be done with maximum involvement of Government personnel where possible. All software developed for WDTC is understood to be Government property and source code will be provided during development and upon project completion. Training will be provided for programs developed by the Contractor to WDTC government Instrumentation technicians in order to facilitate test support after active involvement of the Contractor is complete.

1.6.8.7 The contractor shall be responsible for ensuring all contractor’s employees working onsite at DPG to possess and maintain current Information Assurance Technician (IAT) Level II professional certification within 60 days after contract award and must maintain IAT Level II for the life of the contract. The contractor and contractor’s employees must also apply to DSD and receive their System Administrator (SA) credentials within 120 days after contract award.

1.6.8.8 Data Rights

1.6.8.8.1 The Contractor shall deliver data and software (with applicable data rights) as set forth in this PWS. In accordance with DFARS 252.227-7013, 7014, 7016, 7017,7019, 7028, 7030, 7037 and DFARS 252.227-7103.6, the Government obtains under this Contract “Unlimited Rights” to all non-commercial computer software, software source code, computer software documentation, enhancements, technical data, and similar non-commercial data developed exclusively at Government expense and delivered to the Government under this contract. “Unlimited Rights” means rights to use, modify, reproduce, release, perform, display, or disclose in whole or in part, in any manner and for any purpose whatsoever, and to have the ability to authorize others to do so.

1.6.8.8.2 For all non-commercial software provided by contractor, contractor shall ensure that any individual who creates any of the computer software provides an assignment of any and all proprietary rights in the computer software including all copyrights and patent rights to the software so that the Government has the unlimited rights to the software specified above. It is the contractor's obligation to ensure compliance with all open-source covenants or requirements if any open-source software is included in any deliverable.

1.6.8.8.3 The Contractor shall embed the following Code Header in all software components delivered to the Government:

/// SECURITY CLASSIFICATION: CUI

/// UNLIMITED RIGHTS

/// DFARS Clause reference: 252.227-7013 (a)(16) and 252.227-7014 (a)(16) /// Unlimited Rights. The Government has the right to use, modify, reproduce, release, /// perform, display or disclose this (technical data or computer software) in whole or in /// part, in any manner, and for any purpose whatsoever, and to have or authorize others /// to do so.

/// Distribution Statement D. Distribution authorized to the Department of Defense and /// U.S. DoD contractors only in support of US DoD efforts. Other requests shall be /// referred to the Contracting Officer’s Representative (COR).

/// Warning: This document contains data whose export is restricted by the Arms Export /// Control Act (Title 22, U.S.C., Section 2751, et seq.) as amended, or the Export /// Administration Act (Title 50, U.S.C., App 2401 et seq.) as amended. Violations of /// these export laws are subject to severe criminal and civil penalties. Disseminate in /// accordance with provisions of DoD Directive 5230.25.

1.6.8.8.4 The Contractor agrees that regardless of how Contractor-provided data/software is developed or modified during Contract performance, the Contractor shall deliver data/software marked in accordance with requirements in DFARS 252.227-7013, 252.277-7014, or other applicable DFARS references. All documentation provided under this Contract is a deliverable to the Government, and the Government has Unlimited Rights to said documentation.

1.6.8.8.5 For commercial data delivered under this contract, the Government has the right to use, modify, reproduce, release, display, or disclose, in whole or in part, in any manner and for any purpose whatsoever, and to have or authorize others to do so. (Refer to DFARS 252.227-7015 Technical Data, Commercial Items). All deliverables shall be made electronically via email IAW CDRL DD1423 instructions. If a delivery is submitted via email and the size or the firewall prevents its delivery, the Contractor shall provide a Secure File Transfer Protocol site that allows the Government to download the deliverable. If a site is not available or not feasible, the Government will make one available to the Contractor. In case no sites are available, the Contractor shall deliver via compact disk/digital videodisk (CD/DVD). The CD/DVD must be properly labeled to identify the content to include classification, version number, and date.

1.6.8.8.6 Paragraph 5 identifies contract deliverables for this PWS. Data items shall be prepared in accordance with the most recent version of the applicable DID, tailored when approved by the Government. DIDs are available on the “Assist Quick Search” website, http://quicksearch.dla.mil/qsSearch.aspx.

1.6.8.8.7 Where not specified by the Government, the Contractor shall prepare deliverables in Contractor format.

1.6.9 Post Award Conference/Periodic Progress Meetings: The Contractor agrees to attend any post award conference convened by the contracting activity or contract administration office in accordance with Federal Acquisition Regulation Subpart 42.5.

The contracting officer, Contracting Officers Representative (COR), and other Government personnel, as appropriate, may meet periodically with the contractor to review the contractor's performance. At these meetings the contracting officer will apprise the contractor of how the government views the contractor's performance and the contractor will apprise the Government of problems, if any, being experienced.

Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the government. CDRL 4

1.6.10 Contracting Officer Representative (COR): The (COR) will be identified by separate letter. The COR monitors all technical aspects of the contract and assists in contract administration The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract: perform inspections necessary in connection with contract performance: maintain written and oral communications with the Contractor concerning technical aspects of the contract: issue written interpretations of technical requirements, including Government drawings, designs, specifications: monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies; coordinate availability of government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

1.6.11 Key Personnel: The follow personnel are considered key personnel by the government: Contract Manager/Alternate Contract Manager, and LabVIEW Support Personnel. The contractor shall provide a contract manager who shall be responsible for the performance of the work. The name of this person and an alternate who shall act for the contractor when the manager is absent shall be designated in writing to the DPG contracting officer (KO). The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The contract manager or alternate shall be available as identified in section 1.6.4.

Qualifications for all key personnel are identified in section 1.6.8.

1.6.12 Identification of Contractor Employees: All contract personnel attending meetings, answering Government telephones, and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are

Government officials. They must also ensure that all documents or reports produced by contractors are suitably marked as contractor products or that contractor participation is appropriately disclosed. The contractor is not required to obtain a Common Access Card (CAC) and he will be always accompanied by a government employee.

1.6.13 Reserved

1.6.14 Other Direct Costs: All items to be charged as Other Direct Costs must be approved by the government, in writing, prior to accruing the costs.

1.6.15 Organizational Conflict of Interest: Contractor and subcontractor personnel performing work under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications, or work statements, etc.) or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the Contracting Officer immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the Contracting Officer to avoid or mitigate any such OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the Contracting Officer and in the event the Contracting Officer unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the Contracting Officer may affect other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the

OCI.

1.6.17 PHASE IN /PHASE OUT PERIOD: not applicable.

PART 2 DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1. DEFINITIONS

2.1.1. CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2. CONTRACTING OFFICER. A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3. CONTRACTING OFFICER'S REPRESENTATIVE (COR). An employee of the U.S. Government appointed by the contracting officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations.

This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4. DEFECTIVE SERVICE. A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5. DELIVERABLE. Anything that can be physically delivered but may include non-manufactured things such as meeting minutes or reports.

2.1.6. KEY PERSONNEL. Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7. PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.

2.1.8. QUALITY ASSURANCE. The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9. QUALITY ASSURANCE Surveillance Plan (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.10. QUALITY CONTROL. All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.11. SUBCONTRACTOR. One that enters into a contract with a prime contractor.

The Government does not have privity of contract with the subcontractor.

2.1.12. WORK DAY. The number of hours per day the Contractor provides services in accordance with the contract.

2.1.12. WORK WEEK. Monday through Friday, unless specified otherwise.

2.2. ACRONYMS:

ACOR Alternate Contracting Officer's Representative AFARS Army Federal Acquisition Regulation Supplement AR Army Regulation AT-OPSEC Anti Terrorism – Operational Security CAC Common Access Card CCE Contracting Center of Excellence CFR Code of Federal Regulations CLA Certified LabVIEW Architect

CLD Certified LabVIEW Developer COI Conflicts of Interest CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative COTR Contracting Officer's Technical Representative COTS Commercial-Off-the-Shelf DSD Data Sciences Division DA Department of the Army DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement DMDC Defense Manpower Data Center DOD Department of Defense DPG Dugway Proving Ground FAR Federal Acquisition Regulation HIPAA Health Insurance Portability and Accountability Act of 1996 IAT Information Assurance Technician KO Contracting Officer OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program SA System Administrator T&E Test & Evaluation TE Technical Exhibit WDTC West Desert Test Center

PART 3

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

3. GOVERNMENT FURNISHED ITEMS AND SERVICES:

3.1. Services: The Government will provide personnel to assist in obtaining T&E requirements and normal office administrative functions.

3.2 Facilities: The Government will provide the necessary workspace for the contractor staff to provide the support outlined in the PWS to include desk space, telephones, computers, and other items necessary to maintain an office environment.

3.3 Materials. The Contractor shall furnish equipment and materials required to perform work under this contract that are not listed under Part 3 of this PWS.

3.4 Documentation. The Government will make available to all potential vendors all standards, policies, procedures, directives, etc., identified in the PWS.

PART 4

SPECIFIC TASKS

4. Specific Tasks:

4.1. Basic Services. The contractor shall provide services as identified in section 1.4, being:

● LabVIEW software support

● LabVIEW software training

● LabVIEW software development

● Software consulting

● System development

● National Instruments hardware consulting

Specifically, the contractor shall be tasked to provide various levels of assistance in terms of Software development and technical services in support of test programs that will vary dependent on level and amount of workload in WDTC. A normal level of assistance to Instrumentation personnel would be consultation and training in software development and hardware expertise, but dependent on workload, the Contractor might be tasked with providing the majority of the Software development and Hardware installation for certain test programs. If this occurs, the Contractor will work closely with Instrumentation personnel to insure their familiarity with the installed hardware and LabVIEW programming so that Government personnel can facilitate repairs and maintenance. The Contractor will develop Software code in conformance with WDTC data collection standards in order to alleviate confusion and utilize NI hardware compatible with NI hardware already in use at DPG WDTC, unless test requirements dictate otherwise, which then WDTC personnel will be trained to use. When the Contractor is tasked with Developing software for WDTC test programs independent of WDTC government Instrumentation personnel due to WDTC workload, all Software development and Hardware integration will be done with maximum involvement of Government personnel where possible. Training will be provided for programs developed by the Contractor to WDTC government Instrumentation technicians in order to facilitate test support after active involvement of the Contractor is complete.

PART 5

APPLICABLE PUBLICATIONS

5. APPLICABLE PUBLICATIONS (CURRENT EDITIONS)

5.1. The Contractor must abide by all applicable regulations, publications, manuals, and local policies and procedures.

PART 6

ATTACHMENT/TECHNICAL EXHIBIT LISTING

Attachment/Technical Exhibit List:

Attachment 1/Technical Exhibit 1 – Performance Requirements Summary

6.3 Attachment 2/Technical Exhibit 2 – Deliverables Schedule

6.3 Attachment 3/Technical Exhibit 3 – Estimated Workload Data

TECHNICAL EXHIBIT 1

Performance Requirements Summary – PRS

The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. Contractor must at all times have available the certified personnel for the requirements. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success.

Performance Objective

Standard Performance Threshold

Incentive / Disincentive

PRS # 1.

Para: 1.6.8.2 The contractor shall be a National Instruments Silver Alliance Partner with a minimum of 5 Certified LabVIEW Architects (CLA) and Certified LabVIEW Developer’s (CLD) on staff.

The Contractor shall also have a Value Added Reseller (VAR) contract with National Instruments.

The Contractor shall have both Project Management (PM) and Technician capabilities in order to assist DPG personnel. The Contractor shall also have on staff a NI Certified Professional Instructor (CPI) for future training courses to be conducted at

DPG.

The contractor will provide evidence of the Performance Objective.

CDRL 3

Zero deviation from standard.

PRS # 2.

The Contractor shall be available on short notice (within 1 day) to respond to emergent test situations or consultation requirements.

The contractor will provide evidence that they will be available on short notice (within 1 day).

CDRL 3

PRS # 3.

The Contractor shall have a familiarity and experience with developing LabVIEW programs for Chemical Agent and Biological based test solutions, Army Test Communications Networks, Chambers, Field Testing, Wind Tunnels, and the ability to adapt to unique Army Test and Evaluation requirements in terms of Software Development, Hardware and test infrastructure control and Data Acquisition.

The contractor will provide evidence of the Performance Objective.

CDRL 3

75% of standard.

PRS # 4.

Para 1.6.8.2

The Contractor shall have expertise in a wide range of NI technologies. The following are examples, but not limited to: CompactRIO (cRIO), CompactDAQ (cDAQ), motion, video, Opto22 OPC and LabVIEW communications, EthernetRIO, EtherCAT, Modbus, FPGA programming, serial communications.

The contractor will provide evidence of the Performance Objective.

CDRL 3

75% of standard.

PRS # 5.

Para 1.6.8.3

The Contractor must have the ability to interface with National Instruments on a deeper Technical level than WDTC’s current NI training contract in order to facilitate fixes and programming solutions on unique software/hardware problems encountered while installing and operating NI hardware, third party hardware and developing LabVIEW software.

The contractor will provide evidence of the Performance Objective.

CDRL 3

75% of standard.

PRS # 6.

Para 1.6.8.4

The contractor shall ensure conformance to statutes and laws; Government regulations, policies and procedures; industry best practices. The contractor shall report existing and/or potential organizational Conflicts of Interest (COI).

The contractor will provide evidence of the Performance Objective.

CDRL 3

PRS # 7.

Para 1.6.8.5

The contractor shall be tasked to provide a CPI (Certified Professional Instructor) in Certified LabVIEW courses to be conducted at DPG. These training courses will be set up at times mutually beneficial to both the Government and Contractor.

The contractor will provide evidence of the Performance Objective.

CDRL 3

PRS # 8.

Para 4.1

The contractor shall provide various levels of software support in terms of LabVIEW Software development and technical services in support of test programs.

The contractor will provide on-the-spot support with minimal discussion with their home office or LabVIEW experts. CDRL 3

PRS # 9.

Para 4.1

The contractor shall provide various levels of consultation in terms of LabVIEW Software development and technical services in support of test programs.

The contractor will provide on-the-spot consultation with minimal discussion with their home office or LabVIEW experts. CDRL 3

75% of standard.

PRS # 10.

Para 1.6.8.5

The contractor shall provide various levels of training in terms of LabVIEW Software development and technical services in support of test programs.

The contractor will provide on-the-spot training with minimal discussion with their home office or LabVIEW experts. CDRL 3

75% of standard.

PRS # 11.

Para 4.1

The contractor shall provide various levels of system development in terms of LabVIEW Software and National Instruments Hardware and how they work together as a system, in support of test programs.

The contractor will provide on-the-spot system development with minimal discussion with their home office or LabVIEW experts. CDRL

PRS # 12.

Para 4.1

The contractor shall provide various levels of consultation in terms of National Instruments Hardware and technical services in support of test programs.

The contractor will provide on-the-spot consultation of NI hardware with minimal discussion with their home office or LabVIEW experts. CDRL 3

75% of standard.

PRS # 13.

Para 1.6.7

Contractor personnel performing work under this contract must have a Secret clearance within 60 days after contract award

The contractor will provide evidence of obtaining a Secret clearance within 60 days after contract award.

CDRL 3

PRS # 14.

Para 1.6.7

The contractor shall maintain their Secret clearance for the life of the contract. The contractor shall also comply with 1.6.7 Security Requirements

The contractor will provide evidence of maintaining their Secret clearance and compliance with 1.6.7. CDRL 3

PRS # 15.

Para 1.6.8.8

The contractor shall deliver all source code used and created for projects at WDTC with the intent to enable WDTC to modify the code if needed. To this end, the contractor will assign WDTC the copyright ownership of the code.

The contractor will provide evidence of delivery of source code.

CDRL 3

TECHNICAL EXHIBIT 2

DELIVERABLES SCHEDULE

Deliverable

CDR

L Frequency

# of Copies Medium/Format Submit To

The contractor shall provide training materials, as specified in paragraph 1.6.8.5.

1 The training material will be provided prior to or at the time of the training sessions.

There will be enough copies for each of the personnel being trained.

The materials may either be hard copy or electronic media (DVD).

Test Instrumentation Branch, building 4352, Dugway, UT 84022-5000.

The contractor shall provide all software developed for WDTC, as it is understood to be Government property and source code will be provided during development and upon project completion.

2 The source code will be provided during development and upon project completion.

The source code will be provided as needed during development, and 1 final copy upon project completion.

The source code will be provided by electronic media (DVD).

Test Instrumentation Branch, building 4352, Dugway, UT 84022-5000.

The contractor shall provide all evidence of the performance requirements summary, as outlined in Section 7 Technical exhibit 1.

3 Frequency as outlined in Section 7 Technical exhibit 1.

One The evidence may either be hard copy or electronic media (email).

Test Instrumentation Branch, building 4352, Dugway, UT 84022-5000.

The contractor will deliver proof of training IAW paragraphs 1.6.7 and associated sub-paragraphs

4 As required N/A Electronic copy via email

COR or, if no COR has been appointed, the Contracting Officer

TECHNICAL EXHIBIT 3

ESTIMATED WORKLOAD DATA

ITEM

NAME

ESTIMATED QUANTITY

/ YEAR

1 Manager, support, consult, train, Software/System development

________ 526 man-hours