PWS .pdf

PERFORMANCE WORK STATEMENT (PWS)

High Angle Precision Rifle Ballistics Training

Requiring Activity: 304 Rescue Squadron (304 RQS), 920 Rescue Wing

Training Location: Pollock, Idaho 83547

Period of Performance: 27 April 2026 – 01 May 2026

1.0 GENERAL

This is a non-personal services contract to provide High Angle Precision Rifle Ballistics training for ten (10) members of the 304 Rescue Squadron (304 RQS). The Contractor shall provide all personnel, instructors, equipment, facilities, materials, transportation, supervision, and management necessary to perform the services described in this PWS, except for Government- Furnished Property (GFP).

2.0 BACKGROUND

The 304 RQS provides critical combat search and rescue and humanitarian response capabilities in support of the 920 Rescue Wing mission. In accordance with AFMAN 10-3507, squadron members must maintain proficiency and recertification in High Angle Precision Rifle Ballistics.

This training enhances decision-making, leadership, safety, and mission effectiveness in high-stress operational environments.

3.0 SCOPE

The Contractor shall conduct a five (5) day High Angle Precision Rifle Ballistics course for ten

(10) personnel. The Government will provide four (4) rifles. The Contractor shall provide six (6) rental rifles compatible with course requirements and ammunition calibers.

4.0 TRAINING REQUIREMENTS

Training shall include, at a minimum:

4.1 Zero confirmation and recoil management: The Contractor shall conduct initial rifle zero confirmation for all participants and validate zero at appropriate distances consistent with the course design. The Contractor shall provide instruction on recoil management principles, including body positioning, natural point of aim, trigger control, follow-through, and spotting impacts. Instructors shall provide corrective coaching to ensure students develop repeatable shot placement and maintain consistent grouping within instructor-established acceptable performance standards.

4.2 Kestrel instruction and ballistic validation: The Contractor shall provide classroom instruction on the configuration and proper use of Kestrel or equivalent ballistic devices. Instruction shall include environmental data input procedures such as temperature, density altitude, barometric pressure, and wind inputs. The Contractor shall conduct practical exercises validating ballistic solver outputs through live-fire confirmation. Students shall demonstrate the ability to independently generate firing solutions and adjust those solutions based on real-time environmental changes and observed impacts.

4.3 Shooter/Spotter communications: The Contractor shall instruct participants on standardized shooter/spotter communication procedures, including target acquisition, range confirmation, correction calls, and follow-up engagement commands. Paired drills shall reinforce communication efficiency under time constraints and during live-fire evolutions. The Contractor shall evaluate communication clarity, accuracy, and timeliness and provide corrective feedback to improve team synchronization and performance under stress.

4.4 Chronograph data collection and trueing: The Contractor shall instruct students on the proper setup and safe operation of chronograph equipment to collect muzzle velocity data for student rifles. The Contractor shall train students on ballistic coefficient confirmation and data “trueing” procedures to ensure accurate ballistic profiles.

Students shall validate collected data through extended-distance engagements and demonstrate understanding of how velocity variations influence external ballistic performance.

4.5 Alternate shooting positions and tripod utilization: The Contractor shall provide instruction and practical training in alternate and unconventional firing positions, including standing, kneeling, supported, and improvised positional shooting.

Instruction shall include proper tripod setup, load techniques, and stabilization methods. Students shall conduct drills requiring rapid transitions between positions while maintaining accuracy and stability. The Contractor shall evaluate positional stability, speed, and accuracy within terrain-integrated problem-solving scenarios.

4.6 Extreme high and low angle engagements (up to 60 degrees): The Contractor shall provide terrain enabling engagements at elevation changes up to 60 degrees. Instruction shall include cosine angle correction principles and their practical application. Live-fire exercises shall require students to calculate corrected distances and apply appropriate holds during high and low angle engagements. The Contractor shall ensure safe movement and weapons handling practices on steep and uneven terrain throughout all training evolutions.

4.7 Cross-canyon engagements with variable wind conditions: The Contractor shall provide terrain capable of presenting complex and variable wind conditions typical of cross-canyon engagements. Instruction shall include wind reading techniques utilizing mirage interpretation, terrain indicators, and environmental cues. Live-fire exercises shall require multi-layer wind calls and real-time adjustments. The Contractor shall evaluate the student’s ability to analyze wind effects and adjust firing solutions accordingly in both shooter/shooter and shooter/spotter configurations.

4.8 Internal and external ballistics instruction: The Contractor shall provide classroom instruction covering internal ballistics principles, including pressure and velocity development, as well as external ballistics principles such as trajectory, drag, gravity effects, and other environmental influences as applicable. Instruction shall include analysis of ammunition selection and environmental variables impacting projectile performance. Students shall demonstrate working knowledge of ballistic principles through practical application and live-fire validation exercises.

4.9 Low light / no light engagements: The Contractor shall conduct live-fire training during reduced visibility conditions. Instruction shall address target identification considerations, equipment configuration, safety protocols, and engagement procedures under low-light or no-light conditions. Students shall demonstrate safe weapons handling, target discrimination, and effective engagement performance during limited visibility scenarios.

4.10 Culminating exercise (CULEX) and after-action debrief: The Contractor shall conduct a culminating exercise integrating all course components in a scenario-based training event. The exercise shall require students to independently develop ballistic solutions, execute engagements, and apply communication procedures under simulated operational conditions. The Contractor shall evaluate decision-making, technical proficiency, and teamwork performance. Upon completion, the Contractor shall conduct a formal after-action review identifying strengths, deficiencies, and sustainment recommendations. A written course completion roster identifying all personnel who successfully completed the training shall be provided to the Government.

4.11 Ammunition Responsibility: The Contractor shall provide all required ammunition necessary to execute the full five (5) day course of instruction. The Contractor shall ensure ammunition is commercially manufactured, serviceable, and compatible with both Government-provided and Contractor-provided rifles.

The Contractor shall maintain proper storage, handling, and accountability procedures in accordance with applicable federal, state, and local laws. All costs associated with Contractor-furnished ammunition shall be included in the contract price. The Contractor shall ensure safe ammunition handling procedures are enforced throughout all training evolutions. Any ammunition malfunction, misfire, or safety-related incident shall be immediately reported to the Government Point of Contact (POC).

4.12 Risk Mitigation and Medical Response Requirements: The Contractor shall maintain a safety plan and risk mitigation strategy for all live-fire and movement-based training. A safety briefing will be conducted at the start of each training day and before high-risk activities. A qualified Range Safety Officer (RSO) must be present during live-fire operations, with authority to halt training if unsafe conditions arise. Basic life support (BLS) capabilities, including trauma kits and trained personnel, must be available on-site. The training venue must be within sixty (60) minutes of a medical facility capable of handling traumatic injuries, and the Contractor must provide its name and location beforehand. Reliable communication with emergency services is required at all times, and in the case of a medical emergency, both emergency services and the Government POC must be notified immediately. Any safety incidents or injuries must be documented and reported to the Government within twenty-four (24) hours.

5.0 FACILITIES AND SUPPORT REQUIREMENTS

The Contractor shall provide range facilities capable of supporting high-angle shooting, cross-canyon engagements, and extended distances up to 2,500 meters.

• Classroom with seating for 12 personnel and HDMI-capable AV equipment

• Mountainous terrain with dynamic wind conditions

• Steel targets and moving target systems

• Secure arms storage and cleaning area

• Off-road vehicles for range movement

• Wi-Fi and basic life support amenities

5.1 Individuals attending the training course will be traveling on DTS orders. Therefore, the contractor will not incorporate lodging costs, meal costs, or other food item costs into quotation pricing. All individuals attending training, site visits, or any other activity related to this contract are solely responsible for arranging and funding their own lodging and meals.

6.0 PERIOD AND PLACE OF PERFORMANCE

Training shall occur 27 April 2026 through 01 May 2026 in the vicinity of Pollock, Idaho 83547.

7.0 DELIVERABLES

The Contractor shall provide:

• Training schedule 30 days prior to execution

• Packing list 14 days prior to execution

• Instructor roster and qualifications

• Final training completion roster

• After-action report summarizing training outcomes

8.0 QUALITY ASSURANCE

The Government will evaluate contractor performance based on adherence to schedule, quality of instruction, safety compliance, and delivery of required services.

8.1 PERFORMANCE REQUIREMENTS SUMMARY (PRS)

Performance Objective

Performance Standard

Method of Surveillance

Acceptable Quality Level (AQL)

Provide 5-day training course

All required topics delivered

Government POC observation

100%

Provide rental rifles 6 serviceable rifles available

Government Inspection 100%

Deliver required documentation

All deliverables submitted on time

Document review 100%

Maintain safety compliance

No preventable safety incidents

Incident reporting review

Zero tolerance

9.0 NON-PERSONAL SERVICES STATEMENT

Contractor personnel shall be controlled and supervised by the Contractor. No contractor personnel shall supervise Government employees or obligate Government funds. Only the Contracting Officer may modify the contract.

10.0 POINTS OF CONTACT

• Primary POC: John (JP) P. Marchand, Pararescueman, john.marchand.2@us.af.mil

• Alternate POC: Kalu Nebebe, Contract Manager, kalu.nebebe.1@us.af.mil