PWS_10th SFG_Austere Care and EMT Training.pdf

Version 202407

4/10 C CO Austere Care and EMT Training

18 DECEMBER 2025

PART 1

GENERAL INFORMATION

1. GENERAL: This is a non-personal service contract under which the personnel rendering the services are not subject, either by the contract’s terms or by the manner of its administration, to the supervision and control usually prevailing in relationships between the Government and its employees. The United States (U.S.) Government shall not exercise supervision or control over the Contractor’s employees performing the tasks herein. Such contract employees shall be accountable solely to the Contractor who, in turn shall be responsible to the U.S. Government.

1.1 Description of Services/Introduction: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform 4/10 C CO Austere Care and EMT Training as defined in this PWS except for those items specified as government furnished property (GFP) and government furnished services (GFS). The contractor shall perform to the standards in this contract.

1.2 Background: The C Company, 4th Battalion, 10th Special Forces Group (C/4/10) mission is to assess and develop resistance organizations during the early phases of an Unconventional Warfare (UW) campaign in a denied area to provide the US Government policy makers with Special Warfare options. This mission requires a Special Forces Operational Detachment - Alpha (SFOD-A) to have the ability to provide prolonged medical care and support to themselves and others, within the medical rules of engagement, in semi-permissive and denied environments.

Charlie Company trains specialized operators, known as “Jedburghs” or “Jeds,” that currently operate with allied partners in support of contingency operations abroad. Medical proficiency in prolonged and austere conditions is a core functionality of the Jedburgh mission. Although Jedburghs can have medical members on the team, various mission conditions and directives from 1st Special Forces Command (1SFC) dictate that all members of the team require a higher level of medical. This additional medical training and credentialing is known as a “J4” additional skill identifier (ASI) and can be conducted through vendor-provided training; requirements are outlined in 1SFC regulation 350-1 and J4 credentialing procedures.

1.3 Objectives: The objective of this contract is to provide operators with Austere Medical Care qualifications as outlined by 1SFC credentialing procedures and 1SFC Regulation 350-1. Training objectives include Special Operations Forces Austere Medical Technician (SOFAMT) scope of practice and critical skills as listed in 1SFC SOFAMT policy, instruction to pass and obtain National Association of Emergency Medical Technicians (NAEMT) or National Registry of Emergency Medical Technicians – Basic (NREMT-B) certification test, Tactical Combat Casualty Care (TCCC), and Prolonged Field Care.

1.4 Scope: Contractor shall provide non-personal services necessary to complete the objectives as outlined in 1.3 and defined in part 5.

1.5 Period of Performance: 12 JAN 2026 – 06 MAR 2026.

1.6 General Information:

1.6.1 Quality Control Plan (QCP): The Contractor shall develop, implement, and maintain a QCP and program to ensure all work described in this contract is performed at or above the standard defined in the Performance Requirements Summary (PRS). The QCP is developed by the contractor for its internal use to ensure that it performs and delivers high-quality service. The contractor’s QCP is the means by which the contractor ensures all work complies with the requirements of the contract. The QCP identifies and corrects potential and actual problem areas throughout the entire scope of the contract.

1.6.1.1 The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The QCP shall be submitted within thirty (30) days of contract award. After acceptance of the QCP, the contractor shall receive the contracting officer’s (KO) acceptance in writing of proposed changes to the QC procedures. The contractor shall submit QCP changes within five (5) days to the KO and Contracting Officer’s Representative (COR) for review and approval prior to implementation.

1.6.1.2 The Quality Control Plan shall address as a minimum:

1.6.1.2.1 Inspection Program. Included shall be a quality control inspection program covering all general and specific tasks included in the contract scope of work. It shall specify tasks or areas to be inspected on a scheduled or unscheduled basis, the manner in which inspections are to be conducted, the titles of the individuals who will perform the inspections, and the percentage of the work that will be inspected on a recurring basis. In developing this inspection program, the Contractor shall identify the key activities and associated characteristics in each process that have a significant influence on specific services and provide for methods for evaluation of the selected characteristics.

1.6.1.2.2 Deficiency Identification. The QCP shall include a method of identifying deficiencies in the quality of services performed before the level of performance becomes unacceptable as defined in the PRS. This shall contain processes for corrective action without dependence upon Government direction.

1.6.1.2.3 Deficiency Correction. The program shall contain process control and process performance measurement procedures that shall include how the Contractor shall implement preventive corrective actions. The Contractor shall demonstrate that it has designed quality into the delivery of services thereby mitigating the risk(s) associated with delivery of deficient or nonconforming services.

1.6.1.2.4 Documentation and Enforcement. The QCP shall include a method of documenting and enforcing quality control operations of both prime contractor and subcontractor work; including inspection and testing.

1.6.1.2.5 Trend Analysis. The QCP shall include a method of performing trend analysis and assessments through the use of metrics.

1.6.1.2.6 Surveillance Methods. The QCP shall contain specific surveillance techniques for all contract services.

The surveillance methods shall be comprehensive and adaptable to the reporting system of the plan.

1.6.2 Quality Assurance (QA): The government shall evaluate the contractor’s performance under this contract in accordance with (IAW) the Quality Assurance Surveillance Plan. This plan is primarily focused on what the Government must do to ensure that the contractor has performed IAW the performance standards and contract quality requirements are met. Contract quality requirements” means the technical requirements in the contract relating to the quality of the product or service and those contract clauses prescribing inspection, and other quality controls incumbent on the contractor, to ensure the product or service conforms to the contractual requirements. It defines how the performance standards will be applied, the frequency of surveillance, the performance threshold, and deductions, if applicable.

1.6.3 Recognized Holidays: The contractor is not required to perform services on federally recognized holidays.

New Year’s Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Thanksgiving Day Independence Day Christmas Day Juneteenth

1.6.4 Hours of Operation: The contractor is responsible for conducting business between the hours of 9AM-5PM Monday through Friday, except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. For other than firm fixed price contracts, the contractor will not be reimbursed when the government facility is closed for the above reasons.

The Contractor must, at all times, maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons.

1.6.5 Place of Performance: The work to be performed under this contract will be performed locally within 25 miles from Fort Carson, CO.

1.6.6 Type of Contract: This is a firm fixed price (FFP) type contract.

1.6.7 Security Requirements:

1.6.7.1 Access and general protection/security policy and procedures: Contractor and all associated subcontractor employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office.

Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204‐9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

1.6.7.2 Physical Security: The contractor shall be responsible for safeguarding all government equipment, information, and property provided for contractor use. At the close of each work period, government facilities, equipment, and materials shall be secured IAW Army Regulation (AR) 190-13, “The Army Physical Security Program.”

1.6.7.3 Escorts: The Contractor and all associated sub-contractor employees performing services under this contract shall be escorted at all times by host nation security personnel or by an individual designated by the Contracting Officer Representative (COR) while accessing U.S. facilities or activities.

1.6.7.4 Personnel Security Clearance Requirements: Reserved.

1.6.7.4.1: The contractor shall follow DOD Federal Acquisition Regulation Supplement (DFARS) clause 252.223- 7004, Drug-free Work Force. The contractor shall conduct drug tests, ensuring all top secret cleared contractor employees are tested at least once per year, each year of the contract, as well as when there is a reasonable suspicion that an employee uses illegal drugs. The drug testing shall be at the contractor’s expense. Positive drug test results shall be made available to both the KO and COR within 24 hours of known test results. Records of drug testing shall be made available to the COR.

1.6.7.5 Background Checks: The Contractor shall ensure contractor employees and subcontractor employees performing services under this contract have passed a security check conducted by the State Police Department of their U.S. residence. Security checks that have been completed as part of a personnel security clearance background investigation, or a previous background check that was a condition of employment, meet this requirement.

Documentation of these checks will be made available to the KO or COR upon request. The Government retains the right to exclude any employee from performance of duties under this contract if a background security check reveals an employee is a security risk. The exclusion of an employee for security reasons will not relieve the Contractor from performance of services required under this contract. If the Government determines additional background checks are required, at a minimum, and upon request from the Government, the Contractor shall provide to the KO or COR, the following information on any contractor or subcontractor employee performing services under this contract:

• Full birth name

• Married name (if applicable)

• SSN or local equivalent (ID card number)

• Date of birth

• Place of birth (city, country)

1.6.7.5.1 Background Check Notification Requirements: If a background check on any employee or subcontractor employee performing services under this contract, whether the check was conducted as a condition of employment or as part of the contract with the Government, reveals any information from any source (including host country law enforcement) of criminal activity by Contractor employees, subcontractors, or subcontractor employees, the Contractor shall immediately notify the KO and COR of that information. The Contractor shall make notification of:

(1) Traffic violations, other than parking, will be reported to the KO or COR only if the contract is for drivers for the Government;

(2) Any suspicious activity by Contractor employees, subcontractors, or subcontractor employees the Contractor believes may pose a risk to U.S. or host nation national security or imminent risk of deadly bodily harm to any person; and

(3) Any actions taken against Contractor employees, subcontractors, or subcontractor employees pursuant to this requirement.

1.6.7.5.2 Remedies. In addition to other remedies available to the Government, the Contractor’s failure to comply with the requirements of this paragraph my result in requiring the Contractor to remove a Contractor employee or employees from the performance of the contract.

1.6.7.5.3 Subcontracts. The Contractor shall include the substance of this paragraph and the preceding paragraph in all subcontracts.

1.6.7.6 Uncleared Contractor Common Access Card (CAC) Credentialing and Access Procedures: Reserved.

1.6.7.6.1 Contractor Common Access Card (CAC) Eligible Requirements: Reserved.

1.6.7.6.1.1 Federal Installation/Facility Access: Contractor and all associated sub-contractor employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The employee performing services under this contract shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services, Security Office or the host nation equivalent.

1.6.7.6.2. Contractor Non CAC Eligible Requirements for DOD Facility and Installation : Reserved.

1.6.7.7 Access to Government Information Systems: Reserved.

1.6.7.8 Key Control: Reserved.

1.6.7.8.1 Reserved.

1.6.7.8.2. Reserved.

1.6.7.9 Lock Combinations: Reserved.

1.6.8 Post Award Conference/Contract Periodic Progress Meetings: The Contractor shall attend the post award conference convened by the contracting activity or contract administration office IAW Federal Acquisition Regulation (FAR) Subpart 42.5. The KO, COR, with other Government personnel, as appropriate, may meet periodically with the Contractor to review the Contractor's performance. At these meetings the KO will apprise the contractor of how the government views the Contractor's performance and the Contractor will apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues.

These meetings shall be at no additional cost to the government.

1.6.9 Contracting Officer Representative (COR): The COR will be identified by separate letter. The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: ensure the Contractor performs the technical requirements of the contract; perform inspections necessary in connection with contract performance; maintain written and oral communications with the Contractor concerning technical aspects of the contract; issue written interpretations of technical requirements, including Government drawings, designs, specifications; monitor Contractor's performance and notifies both the KO and Contractor of any deficiencies; coordinate availability of government furnished property; and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates, or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

1.6.10 Key Personnel: The following contractor personnel are considered key personnel by the government: The Contractor shall provide a contract manager who shall be responsible for the performance of the work. The name of this person, shall be designated in writing to the Contracting Officer prior to start of contract performance. The Contract Manager and alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract.

1.6.11 Special Qualifications or Certifications: Certified to teach EMT courses resulting in EMT certification for participants.

1.6.11.1 IA/IT Training Certification: All Contractor employees and subcontractor employees supporting IA/IT functions must be certified upon contract award as directed in DoD 8570.01-M, DFARS 252.239.7001, and AR 25-

2. Baseline certification as stipulated in DoD 8570.01-M must be completed upon contract award.

1.6.12 Identification of Contractor Employees: Contractor employees shall identify themselves as Contractor personnel and shall avoid representing themselves as Government employees. This identification includes meeting attendance, answering Government telephones, email communications, and working in other situations where Contractor status is not obvious. Contractor personnel identification shall be easily identifiable through the display of badges, name tags, lanyards, etc.

1.6.12.1 Badging of Contractor Employees: If required by the Government, contract personnel and all associated subcontractors employees accessing U.S. facilities or activities, shall present a valid picture ID provided by the Government while accessing Government owned or contracted facilities and shall adhere to facility security policies and restrictions. If applicable, Government issued access badges will not be worn outside designated facility where visible to the general public. Contractor personnel shall return all U.S. Government issued identification to appropriate U.S. Government authorities within five (5) days of the end of their contractual duties.

1.6.12.2 Uniform: Reserved.

1.6.13 Contractor Travel: Reserved.

1.6.14 Other Direct Costs (ODC): Reserved.

1.6.15 Data Rights: Reserved.

1.6.16. Non-Disclosure Requirements: Reserved.

1.6.16.1 Non-Disclosure Statements: Reserved.

1.6.16.2 Advertisement and Social Media: The Contractor shall NOT post information to public website or social media locations, personal or professional, that in any way disclose names, locations, hotel data, participants, discussions, pictures, etc. before, during or after the contract period of performance without the express consent of the Government. The use of propaganda violates DOD Commercial Use of Imagery Guidelines stated at (http://www.defenseimagery.mil/products/DODimagery/commercialuse.html). The Contractor shall not cite any http://www.defenseimagery.mil/products/dodimagery/commercialuse.html information (e.g., contract information, pictures, locations, etc.) obtained through this contract on any marketing tools to include its company website.

1.6.16.3 INFORMATION ASSURANCE: At no time will the Contractor or associated sub-contractor employees transmit government documents or information over using methods that do not meet the security requirements specified in the National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171, "Protecting Controlled Unclassified Information in Nonfederal Information Systems and Organizations" such as personal electronic mail accounts, public digital data storage sites (cloud storage), social media platforms or instant messaging. Approved government sites such as U.S. Army Aviation and Missile Research Development and Engineering Center (ARMDEC) Safe Exchange at https://safe.amrdec.army.mil/SAFE/About.aspx, or All Partners Access Network (APAN) at https://community.apan.org/, or other transmission means determined by the government must be used.

1.6.17 Organizational Conflict of Interest (OCI): Contractor and subcontractor personnel performing work under this contract may receive, have access to, or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO and in the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may affect other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the

OCI.

1.6.18 Phase-in/Phase-Out (PIPO) Period: Reserved.

1.6.19 General Training Requirements:

1.6.19.1 Anti-Terrorism (AT) Level I Training: The Contractor shall complete AT Level I Training within 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever applies, or 30 calendar days after employment of new personnel, all Contractor employees, including subcontractor employees, who are employed under the contract shall complete AT Level I awareness training within 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever applies. The contractor shall submit certificates of completion for each affected Contractor employee and subcontractor employee to the COR or KO within ten (10) calendar days after completion of training by all employees and subcontractor personnel. For Common Access Card (CAC) holders, AT Level I awareness training is available at https://jkodirect.jten.mil, course number “JS-US007-14”. For non-CAC holders, AT Level I awareness training is available at http://jko.jten.mil/courses/atl1/launch.html (this standalone version is intended for non-CAC users without a JKO account only). Training must have been completed within the last 12 months and maintained yearly thereafter. If training cannot be conducted on the website, the Contractor will coordinate with the local AT Officer at their assigned location for classroom training by a Level 2 trained AT Officer and a copy of either the training certificate or the training attendance roster signed by the AT Officer will be maintained by the Contractor. Verification of the training will be provided to the COR or KO within ten (10) calendar days after completion of the training.

1.6.19.2 OPSEC Awareness: If the Contractor, or a subcontractor, or employees of either disclose any information that disrupts or harms the Government's operations or activities, then the Government retains the right to exclude any employee from performance of duties under this contract. The exclusion of an employee for security reasons will not relieve the Contractor from performance of services required under this contract. By way of example, personnel shall not sketch or take photos of government facilities or activities, unless related to service to be provided. All government paper products and removable digital storage material that is received, generated, or stored during the contract will be destroyed completely when no longer needed to preclude recognition of information.

1.6.19.3 Information Assurance (IA) Training: Contractor employees, including subcontractors, requiring access to Government information systems shall complete the DOD IA Cyber Awareness Training. All employees working information technology (IT)/IA functions must comply with DOD and Army training requirements per DOD Directive (DODD) 8570.01, Information Assurance Training Certification and Workforce Management, DOD 8570.01-M, Information Assurance Workforce Improvement Program, and AR 25-2, Information Assurance, within 30 days of employment. Training is available at https://ia.signal.army.mil/DODIAA/default.asp.

1.6.19.4 Information Assurance (IA)/Information Technology (IT) Training: All Contractor employees and subcontractor employees requiring access to Government information systems must complete the DoD IA awareness training before issuance of network access and annually thereafter. All employees working IA/IT functions must comply with DoD and Army training requirements in Per DoD 8570.01, DOD 8570.01-M, and AR 25-2, within 30 days of employment. Training is available at https://ia.signal.army.mil/DoDIAA/default.asp.

1.6.19.5 Threat Awareness Reporting Program (TARP Training): Within 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever applies, or 30 calendar days after employment of new personnel, all Contractor employees, including subcontractor employees, who are employed under the contract and require a security clearance, shall complete TARP training within 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever applies. The Contractor shall submit certificates of completion for each affected Contractor employee and subcontractor employee to the COR within ten (10) calendar days after completion of training by all employees and subcontractor personnel. TARP training is available at the Army Learning Management System (ALMS) https://www.lms.army.mil/. Training must have been completed within the last 12 months and maintained yearly thereafter. If training cannot be conducted on the website, the Contractor will coordinate with the local Counter Intelligence (CI) Officer at their assigned location for classroom training and a copy of either the training certificate or the training attendance roster signed by the CI Officer will be maintained by the Contractor. Verification of the training will be provided to the Contracting Officer (KO) or Contracting Officer Representative (COR) within ten

(10) calendar days after completion of the training.

1.6.19.6 iWATCH Training: The Contractor will ensure that all Contractor employees and sub-contractor employees performing services under this contract have been briefed on the iWATCH Program, or equivalent for their supporting DoD Agency, within 30 days of employment under the contract. The Contractor will coordinate with the supporting DoD Agency AT Officer through the COR or KO for the briefing. This training will be updated as required by the supporting installation AT policies. A copy of the training attendance will be maintained by the Contractor and made available to the COR or KO upon request.

1.6.19.7 OPSEC Training: All Contractor employees and sub-Contractor employees performing services under this contract will complete Level I OPSEC training within 30 calendar days of employment under this contract. OPSEC Level I training is available at https://jkodirect.jten.mil, course number “EUC-ECJ6-110-N-LB”. Training must have been completed within the last 12 months and maintained yearly thereafter. If training cannot be conducted on the website, the Contractor will coordinate with the local OPSEC Officer at their assigned location for classroom training by a Level 2 trained OPSEC Officer and a copy of either the training certificate or the training attendance roster signed by the OPSEC Officer will be maintained by the Contractor. Verification of the training will be provided to the COR or KO upon request.

https://ia.signal.army.mil/DoDIAA/default.asp https://ia.signal.army.mil/DoDIAA/default.asp

PART 2

DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1. Definitions: Reserved.

2.1.1. Contractor. The total contractor organization or a separate entity of it; such as an affiliate, division, or plant that performs its own purchasing.

2.1.2. Contracting officer (KO). A person with the authority to enter into, administer, and/or terminate contracts and make related determinations and findings.

2.1.3. Contracting Officer’s Representative (COR). An individual designated and authorized in writing by the contracting officer to perform specific technical or administrative functions.

2.1.4. Defective Service. A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5. Deliverable. Anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports.

2.1.6. Key Personnel. Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7. Performance Work Statement (PWS). A statement of work for performance-based acquisitions that describes the required results in clear, specific, and objective terms with measurable outcomes.

2.1.8. Physical Security. Protection of the perimeter area, government property, and assets that prevent the loss or damage of Government property.

2.1.9. Quality Assurance. The various functions, including inspection, performed by the government to determine whether a Contractor has fulfilled the contract obligations pertaining to quality and quantity.

2.1.10. Quality Assurance Surveillance Plan (QASP). A plan describing how the agency will survey, observe, test, sample, evaluate and document the Contractor’s performance in meeting critical performance standards identified in the contract.

2.1.11. Quality Control (QC). Tasks performed by the Contractor to improve the quality of the organization’s output.

2.1.12. Shall. An imperative command; has a duty to or is required to. Denotes that a regulation must be followed unless the contracting officer has obtained a deviation.

2.1.13. Subcontractor. Any supplier, distributor, vendor, or firm that furnishes supplies or services to or for a prime contractor or another subcontractor.

2.1.14. Work Day. The number of hours per day the Contractor provides services in accordance with the contract.

2.1.15. Work Week. Monday through Friday, unless specified otherwise.

2.2 Acronyms:

ALMS Army Learning Management System ANSI American National Standards Institute AOR Area of Responsibility AR Army Regulation ATCTS Army Training Certification Tracking System AT Anti-Terrorism CAC Common Access Card CFR Code of Federal Regulations CI Counter Intelligence CLIN Contract Line Item Number CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative DD Form 254 Department of Defense Contract Security Requirement List DOD Department of Defense DODD Department of Defense Directive DODI Department of Defense Instruction FAR Federal Acquisition Regulation FHP Force Health Protection FCG Foreign Clearance Guide FY Fiscal Year GFE Government Furnished Equipment GFP Government Furnished Property IA Information Assurance IAW In Accordance With IT Information Technology JPAS Joint Personnel Adjudication System JTR Joint Travel Regulation KO Contracting Officer LOA Letter of Authorization NCIC-III National Crime Information Center Interstate Identification Index NIST National Institute of Standards and Technology ODC Other Direct Costs OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs OSHA Occupational Safety and Health Administration OPSEC Operation Security PIPO Phase In/Phase Out PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QASP Quality Assurance Surveillance Plan QCP Quality Control Program RA Requiring Activity SCR Service Contract Reporting SOP Standard Operating Procedures SPOT Synchronized Predeployment and Operational Tracker TE Technical Exhibit TSDB Terrorist Screening Data Base U.S.C. United States Code

PART 3

GOVERNMENT FURNISHED PROPERTY AND SERVICES

3.1 Government Furnished Property

3.1.1 Reserved.

3.1.2 Reserved.

3.1.2.1 Reserved.

3.1.3 Reserved.

3.1.4 Reserved.

3.1.5 Reserved.

3.1.6 Reserved.

3.1.7 Reserved.

3.1.8 Reserved.

3.2 Emergency and Rescue

3.2.1 The Government will furnish emergency medical and rescue services to prevent loss of life, limb, or undue suffering within the areas serviced by the applicable installation emergency services provider. The Government will seek reimbursement for medical services rendered, as appropriate.

3.2.2 The Government will provide installation fire services to include firefighting, fire prevention inspections and investigations; Installation security services; confined space rescue; and Hazardous Material (HAZMAT) first response.

3.3 Telecommunications/Utilities

3.3.1 Reserved.

3.3.2 The Government will furnish appropriate amounts of heat, heating fuels, gas, electricity, sewage, and water utilities, as currently installed in GFF, for use under this contract. All facilities do not receive the same utility services.

The contractor shall not change or modify any Government provided utility systems or components or install any CFE components or system without prior KO or designated representative written approval as coordinated through the

DPW.

3.3.3 Reserved.

3.3.4 Reserved.

3.4 Government Owned Vehicles

3.4.1 Reserved.

3.5 GFE Tools, Hand Tools, Equipment; Test, Measurement and Diagnostic Equipment (TDME) Calibration Services

3.5.1 Reserved.

3.5.2 Reserved.

3.5.3 Reserved.

3.6 Government Furnished Facilities and Real Property

3.6.1 Reserved.

3.6.2 Reserved.

3.6.3 Reserved.

3.6.4 Reserved.

3.6.5 Reserved.

3.6.6 The Government will provide parking areas for privately owned vehicles (POV). Contractor personnel shall comply with all local regulations and directives concerning POV traffic and parking.

3.6.7 Reserved.

3.6.8 Reserved.

3.7 Government Furnished Services

3.7.1 Reserved.

3.7.2 Reserved.

3.7.3 The Government will provide pest control services as required.

3.7.4 The Government will provide grass cutting in accordance with the current post-wide grass cutting contract.

3.7.5 The Government will provide snow removal.

3.8 The Government will provide available containers at specific contractor occupied facilities for collection of recyclable paper and cardboard, on-hand scrap metal, non-hazardous waste wood and wood by-products, and trash pickup.

Vs 202407

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4. Contractor Furnished Property and Services

4.1 General: The Contractor shall furnish all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items necessary to perform services as described in the PWS and associated contract documents, except for those items specified in Part 3 Government Property and Services.

4.2 Secret Facility Clearance: Reserved.

4.3 Materials: The Contractor shall provide required materials such as Personal Protective Equipment;

office supplies and materials such as, paper, printer cartridges, and all other office supplies and training materials needed in the performance of this contract; automated data processing equipment (ADPE) such as computers; training aids relevant to medical training.

4.4 Vehicles and Equipment: Reserved.

4.5 Background Checks: Reserved.

PART 5

SPECIFIC TASKS

5. Specific Tasks:

5.1. Basic Services. The contractor shall provide services for training Jedburghs on Special Operations Forces Austere Medical Technician (SOFAMT) scope of practice and critical skills as listed in 1SFC SOFAMT policy, instruction to pass and obtain National Association of Emergency Medical Technicians (NAEMT) or National Registry of Emergency Medical Technicians – Basic certification, Tactical Combat Casualty Care (TCCC), and Prolonged Field Care. Desired outcome for operators who receive the training are: proficient at skills listed in the SOFAMT scope of practice and critical skills (1SFC policy number 011-23 and 1SFC regulation 350-1), receive sufficient instruction to pass an EMT-Basic certification test (1SFC policy number 011-23 and 1SFC regulation 350-1), proficient at TCCC skills in accordance with the Defense Health Agency’s standards ( policy 011-23, 1SFC regulation 350-1, and deployedmedicine.com), proficient in Prolonged Field Care skills in accordance with SOFAMT policy number 011-23.

5.2. Task Heading. Tasks consist of the following:

5.2.1 Special Operations Forces Austere Medical Technician scope of practice and critical skills.

5.2.1.1 Contractor shall train operators on the following SOFAMT scope of practice skills: patient assessment, triage, advanced airway management, ventilatory support (bag valve mask and/or oxygen therapy), patient monitoring, vascular access (intravenous and interosseous), patient packaging, (spinal and extremity immobilization), minor surgical procedures (simple wound suturing, hemorrhage control, hematoma/abscess drainage), emergency needle thoracentesis, finger thoracostomy, administration of medication, initial management of traumatic conditions (burns, concussions, crushing, fragmentation, laceration, penetrating/perforating wounds, amputations), initial management of shock, initial management of emergency medical conditions (cardiac, respiratory, metabolic, neurologic, toxicologic, and ophthalmologic), initial management of emergency environmental conditions (hypothermia, insect/animal stings and bites, altitude sickness), management of complicated accident and extrication situations, management of crush injuries, familiarization with management of uncomplicated infectious diseases.

(a) STD: Skills will be tested in a written exam and demonstrated to instructors in hands-on exercises, including realistic scenarios in which multiple skills are tested in the same scenario.

AQL: Pass or fail.

5.2.1.2 Contractor shall train operators on the following SOFAMT critical skills: vital signs (measuring respiration, pulse, blood pressure, temperature, monitoring vital signs), medical treatment (treatment for respiratory emergency, poisoned casualty, anaphylactic shock, altitude sickness, diabetic emergency, near drowning casualty, allergic reaction, seizing patient, and chest pain, administer external chest compressions, operate an automated external defibrillator, put on sterile gloves, insert/remove a urinary catheter, insert/remove a nasogastric tube, perform suture removal, perform staple removal), trauma treatment (apply a combat tourniquet, bandage an open wound, initiate treatment for open chest injury, initiate treatment for chemical burns of the eye, initiate treatment for a soft tissue injury, perform needle chest decompression, control bleeding, initate treatment for an amputation, initiate treatment for neck wounds, initiate treatment for open abdominal wounds, initiate treatment for lacerations of the eye lid, initiate treatment for impaled object, initiate treatment for head injury, initiate treatment for burns, perform EMT-B trauma assessment, perform a combat casualty assessment, apply a cervical collar, prepare an aid bag, apply local anesthesia), airway management (set up an oxygen tank, open the airway, clear an upper airway obstruction, perform rescue breathing, ventilate a patient with a bag-valve-mask system, perform oral suctioning), venipuncture and IV therapy (obtain blood specimen, intravenous infusion, initiate saline lock, dispense common fluid and electrolyte solutions, administer blood, initiate/remove intraosseous device), primary care (treat sinus infection, irrigate eyes, treat common eye/throat/ear infections, provide care for common respiratory disorders, perform rapid neurologic assessment, perform patient hygiene), musculoskeletal (apply: rigid splint, elastic bandage, traction splint, sling and swath, provide care for suspected spinal injury), triage and evacuation (transport a casualty using one/two man carry or improvised litter, establish a casualty collection point, triage casualties, load casualties into non-standard vehicles, coordinate casualty treatment and evacuation), medication administration (administer: topical, inhalation, ear, eye, intradermal injection, intramuscular injection).

(a) STD: Skills will be tested in a written exam and demonstrated to instructors in hands-on exercises, including realistic scenarios in which multiple skills are tested in the same scenario.

AQL: Pass or Fail.

5.2.2 Contractor shall train operators on NAEMT/NREMT-Basic skills according to NAEMT/NREMT standards.

(a) STD: Operators will complete the National Registry EMT certification exam as part of the training course.

AQL: Pass or fail.

5.2.3 Contractor shall train operators on the following prolonged field care tasks: assessments (trauma, medical and clinical), resuscitation (IV fluids, blood products, transfusion, advanced/prolonged resuscitation), airway (bag-valve-mask with oxygen supplement, intubations, cricothyrotomy), wounds and splinting (tourniquet, junctional tourniquet, dressings, joint/traction/fracture splinting, prolonged wound care, dressing changes), pharmacology (common medications, pain management, miscellaneous medications), vitals/monitoring (AED and CPR techniques, vital signs), evacuation (casualty collection point and triage, litter employment), documentation (handoffs, prolonged field care tracking documents), environmental (heat/cold injuries/altitude injuries).

(a) STD: Skills will be tested in a written exam and demonstrated to instructors in hands-on exercises, including realistic scenarios in which multiple skills are tested in the same scenario.

AQL: Pass or Fail.

5.2.4 Contractor shall train operators on the TCCC standards as set forth by the Defense Health Agency’s TCCC website www.deployedmedicine.com.

(a) STD: Skills will be tested in a written exam and demonstrated to instructors in hands-on exercises, including realistic scenarios in which multiple skills are tested in the same scenario.

AQL: Pass or Fail.

5.3. Service Contract Reporting (SCR): Reserved.

http://www.deployedmedicine.com/

PART 6

APPLICABLE PUBLICATIONS

6. APPLICABLE PUBLICATIONS (CURRENT EDITIONS) The following publications, manuals, regulations, etc. are mentioned in this PWS and are listed below.

6.1. Department Of Defense Contract Security Classification Specification (DD Form 254)

6.1.1 Department of Defense Security Agreement (DD Form 441)

6.1.2 National Industrial Security Program Operating Manual (DoD 5220.22-M)

6.1.3 Installation Access Control (AE Reg 190-16)

6.1.4 The Army Physical Security Program (AR 190-13)

6.1.5 Contractor Identification (AE Reg 27-715)

6.1.6 U.S. Army Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1)

6.1.7 Information Assurance Workforce Improvement Program (DoD 8570-M)

6.1.8 Information Assurance Training Certification and Workforce Management Directive (DoDD 8570.01)

6.1.9 Information Assurance (AR 25-2)

6.1.10 Electromagnetic Compatibility Directive (2004/108/EC)

6.1.11 Policies and Procedures for Property Accountability (AR 735-5)

6.1.12 1SFC Training Policy (1SFC Regulation 350-1)

6.1.13 Special Operations Forces Austere Medical Technician Program Policies and Procedures (011-23)

PART 7

ATTACHMENT/TECHNICAL EXHIBIT LISTING

7. Attachment and Technical Exhibit List

7.1 Technical Exhibit A – Performance Requirements Summary

7.2 Technical Exhibit B – Deliverables Schedule - Reserved

7.3 Attachment 1 – Estimated Workload Data - Reserved

7.4 Attachment 2 – Historical Workload Data – Reserved

7.5 Attachment 3 – OCI Language - Reserved

7.6 Attachment 4 - Reserved

TECHNICAL EXHIBIT A

Performance Requirements Summary Performance

Objective (The Service required— usually a shall statement)

Standard Performance Threshold (This is the maximum error rate. It could possibly be “Zero deviation from standard”)

Incentive (Positive and/or

Negative)

1. Combating Trafficking in Persons FAR 52.222-50 c

The Contractor shall Notify its employees of

a. The United States Government's zero tolerance policy described in paragraph

(b) of this clause

The actions that will be taken against employees for violations of this policy. Such actions may include, but are not limited to, removal from the contract, reduction in benefits, or termination of employment.

100% Compliance Contractor compliance rate shall be utilized as objective evidence of contract compliance and documented into the CPAR system;

contractor shall re-perform the service

2. Service Contract Reporting

Reserved. Reserved. Reserved.

PRS # 1.

a. 5.2.1.1

b. The contractor shall provide qualified instruction on the topics covered in 5.2.1.1.

Contractor provided operators training on the SOFAMT scope of practice skills: patient assessment, triage, advanced airway management, ventilatory support (bag valve mask and/or oxygen therapy), patient monitoring, vascular access (intravenous and interosseous), patient packaging, (spinal and extremity immobilization), minor surgical procedures (simple wound suturing, hemorrhage control, hematoma/abscess drainage), emergency needle thoracentesis, finger thoracostomy, administration of medication, initial management of traumatic conditions (burns, concussions, crushing, fragmentation, laceration, penetrating/perforating wounds, amputations), initial management of shock, initial management of emergency medical conditions (cardiac, respiratory, metabolic, neurologic, toxicologic, and ophthalmologic), initial management of emergency environmental conditions (hypothermia, insect/animal stings and bites, altitude sickness), management of complicated accident and extrication situations, management of crush injuries, familiarization with management of uncomplicated infectious diseases.

100% Compliance Samplings of after-action reports (AARs) and sample test results will be provided to the COR for periodic evaluation.

PRS # 2.

a. 5.2.1.2

Contractor provided operators on the following SOFAMT critical skills: vital signs

100% Compliance Samplings of after-action reports

b. The contractor shall provide qualified instruction on the topics covered in 5.2.1.2.

(measuring respiration, pulse, blood pressure, temperature, monitoring vital signs), medical treatment (treatment for respiratory emergency, poisoned casualty, anaphylactic shock, altitude sickness, diabetic emergency, near drowning casualty, allergic reaction, seizing patient, and chest pain, administer external chest compressions, operate an automated external defibrillator, put on sterile gloves, insert/remove a urinary catheter, insert/remove a nasogastric tube, perform suture removal, perform staple removal), trauma treatment (apply a combat tourniquet, bandage an open wound, initiate treatment for open chest injury, initiate treatment for chemical burns of the eye, initiate treatment for a soft tissue injury, perform needle chest decompression, control bleeding, initiate treatment for an amputation, initiate treatment for neck wounds, initiate treatment for open abdominal wounds, initiate treatment for lacerations of the eye lid, initiate treatment for impaled object, initiate treatment for head injury, initiate treatment for burns, perform EMT-B trauma assessment, perform a combat casualty assessment, apply a cervical collar, prepare an aid bag, apply local anesthesia), airway management (set up an oxygen tank, open the airway, clear an upper airway obstruction, perform rescue breathing, ventilate a patient with a bag-valve-mask system, perform oral suctioning), venipuncture and IV therapy (obtain blood specimen, intravenous infusion, initiate saline lock, dispense common fluid and electrolyte solutions, administer blood, initiate/remove intraosseous device), primary care (treat sinus infection, irrigate eyes, treat common eye/throat/ear infections, provide care for common respiratory disorders, perform rapid neurologic assessment, perform patient hygiene), musculoskeletal (apply: rigid splint, elastic bandage, traction splint, sling and swath, provide care for suspected spinal injury), triage and evacuation (transport a casualty using one/two man carry or improvised litter, establish a casualty collection point, triage casualties, load casualties into non-standard vehicles, coordinate casualty treatment and evacuation), medication administration (administer:

topical, inhalation, ear, eye, intradermal injection, intramuscular injection).

(AARs) and sample test results will be provided to the COR for periodic evaluation.

PRS # 3.

a. 5.2.2

b. The contractor shall provide qualified instruction on the topics covered in 5.2.2.

Contractor provided operators training on NAEMT/NREMT-Basic skills according to NAEMT/NREMT standards.

100% compliance. Samplings of after-action reports (AARs) and sample test results will be provided to the COR for evaluation.

PRS # 4.

a. 5.2.3

b. The contractor shall provide qualified instruction on the topics covered in 5.2.3.

Contractor provided operators training on the following prolonged field care tasks:

assessments (trauma, medical and clinical), resuscitation (IV fluids, blood products, transfusion, advanced/prolonged resuscitation), airway (bag-valve-mask with oxygen supplement, intubations, cricothyrotomy), wounds and splinting (tourniquet, junctional tourniquet, dressings, joint/traction/fracture splinting, prolonged wound care, dressing changes), pharmacology (common medications, pain management, miscellaneous medications), vitals/monitoring (AED and CPR techniques, vital signs), evacuation (casualty collection point and triage, litter employment), documentation (handoffs, prolonged field care tracking documents), environmental (heat/cold injuries/altitude injuries).

100% compliance. Samplings of after-action reports (AARs) and sample test results will be provided to the COR for evaluation.

PRS # 5.

a. 5.2.4

b. The contractor shall provide qualified instruction on the topics covered in…