Purge Fluid SOW 02132025.pdf
PDF 112 KB Posted
- Attached to
- PURGE FLUID - Hill AFB, UT
- Solicitation number
- FA822425055KH
About this file
This is a Purchase Specification document from the 309th Aircraft Maintenance Group at Hill Air Force Base detailing requirements for 22,500 gallons (+/-) of Purge Fluid conforming to MIL-PRF-38299E specification, Part Number M38299. The document specifies technical delivery requirements including 2-inch and 3-inch cam-lock quick connect/disconnect pipefitting compatibility, minimum 20-feet of 3-inch approved fuel hosing, and the ability for the tanker to pump directly if the base holding tank pump is inoperable.
The delivery terms require shipment via semi-tanker trailer to Buildings 236, 287, and 680 at Hill AFB, Utah within 3 weeks after receipt of order. Deliveries must occur Monday through Thursday between 0600-1300 MDT, with only one truck delivery permitted per day at minimum 24-hour intervals. Required documentation includes Certificate of Conformance, Bill of Lading, and Safety Data Sheet. Drivers must provide license information in advance for base access, speak English, and pass security screening. The government points of contact are Gage Watts and Phil Benstog.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Purge Fluid MIL-PRF-38299E.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
309 Aircraft Maintenance Group
Purchase Specification
PURGE FLUID
1. The Contractor shall deliver 22,500 gallons +/- of Purge Fluid that shall conform to Mil-Spec:
MIL-PRF-38299E.
a. Part Number M38299 (Must be specific to Table 1 found in MIL-PRF-38299E pages 5-
6).
2. No recycling required for this shipment.
3. Equipment required for off-loading Purge Fluid into 309 AMXG’s holding tank(s):
1. 2-inch and 3-inch cam-lock quick connect/disconnect pipefitting, compatible with the 309
AMXG holding tank(s) and system(s).
2. Minimum 20-feet of 3-inch approved fuel/purge fluid hosing with 2-inch and 3-inch
Camlock fittings.
3. As an alternate, tanker shall have the ability to pump from tanker through its own pump into AMXG’s holding tanks in case the 309th AMXG holding tank’s pump is in-operable
(INOP).
4. Driver must contact Government POC to provide Driver's License info to be sponsored on base through the Truck Gate the day before arrival to Hill AFB, Utah.
4. Acquisition Requirements:
a. Purge Fluid must be shipped in a semi-tanker trailer (no drums or small containers)
b. The following shall be provided:
i. Certificate of Conformance (COC)
ii. Bill of Lading
iii. Safety Data Sheet (SDS)
c. Delivery location(s): B236, B287, & B680
i. Gage Watts Building 225 5875 Southgate Ave
HAFB, UT 84056
d. Government POC:
i. Gage Watts (801) 499-9630 or Phil Benstog (385) 358-0491
e. Delivery: 3 Weeks ARO
f. Delivery times: Monday – Thursday 0600 to NLT 1300 (6am to 1pm Mountain Daylight
Time.)
g. Do not send multiple trucks on the same day. One truck delivery per day, with a minimum of 24 hours apart from one another.
h. Entry point: I-15 at Exit 338 Roy, UT (HAFB Gate)
i. Driver shall have valid Driver License, ability to speak and understand English, and ability to pass a security check.
File details come from the government source that posted it. Updated .