PURCHASE OF 2026 KUBOTA SVL75-3.pdf

Legal Notice

TOWN OF BRANFORD

REQUEST FOR BIDS

PURCHASE OF A 2026 KUBOTA SVL75-3

The Town of Branford Wastewater Treatment Plant is requesting bids for a 2026 Kubota

SVL75-3. Specifications and scope of services may be obtained from the Finance

Department, Branford Town Hall, 1019 Main Street, Branford, CT, on the Town’s website at www.branford-ct.gov, or on the State of CT DAS website.

Bids are to be submitted in a sealed envelope marked “2026 Kubota SVL75-3” to the

Finance Department, Attention, Purchasing Clerk, 1019 Main Street, Branford, CT 06405 by 11:30 a.m. on Thursday, April 15, 2026. No bids will be accepted after that date and time. Bids will be publicly opened immediately following the submission deadline in the conference room located on the basement floor of Town Hall.

The Board of Selectmen or the majority reserves the right to select or reject any and/or all bids containing alternate proposals, to waive any informality in proposals and to reject any and/or all bids or accept such bid as shall, in their judgment, be in the best interest of the Town of Branford.

Tyechia Pettway

Purchasing Clerk http://www.branford-ct.gov/

INSTRUCTIONS TO BIDDERS

Town of Branford

Wastewater Treatment Plant

FOR THE PURCHASE OF A

2026 KUBOTA SVL75-3

The Town of Branford Wastewater Treatment Plant is requesting bids for a 2026 Kubota SVL75-3.

Bids are to be submitted in a sealed envelope marked “2026 KUBOTA SVL75-3” to the Finance

Department, Attention, Purchasing Clerk, 1019 Main Street, Branford, CT 06405 by 11:30 a.m. on

Thursday, April 15, 2026. No bids will be accepted after that date and time. Bids will be publicly opened immediately following the submission deadline in the conference room located on the basement floor of Town Hall.

Bidders are to state delivery date on bid form.

Price is to be held for 60 days from bid opening.

Make Model Qty Description

Kubota SVL75-3HFWVRC New Tier 4 Kubota Compact Track Loader

74.3HP, Cab with A/C, Hydraulic Quick

Coupler, HIGH FLOW HYDRAULICS, REV FAN, HEATED AIR RIDE SEAT, KUBOTA SHOCKLESS RIDE, CCV HEATER

15" Wide rubber tracks

Kubota AP-HD74LLC 1 74" Heavy Duty, Low Profile, Long Floor, Cutting Edge, Side Cutter,

19.2 cu-ft heaped capacity, Keyless Start, Backup Camera and Bluetooth Stereo

* Telematics

Buyers 8891110 1 Strobe Light Kit (Magnetic)

Kubota S6763 1 Hose Stay

1 3/8 High Impact Front Window Installed

Camso CTL SD 1 Swap out 15" OEM Track to Camso 15" SD Track

* Dealer to provide loner machine in the event of a catastrophic breakdown during the 2 yr factory warranty

Features

Vertical Lift Path Loader Frame

Standard Front Quick Couplers, Float Standard

Hydraulic Quick Coupler Options

Selectable Loader Arm Self-Leveling

Loader Boom Lock

Open ROPS & Air Conditioned ROPS/FOPS Cab Model

High Back Adjustable, Vinyl, Suspension Seat

3" Retractable Seat Belt and 2-Piece Seat Bar

12V Electric Outlet

19-2 gmp Auxiliary Hydraulics Standard, 29.8 gpm option

Direct To Tank Return Line

Rigid Mounted Undercarriage, 4 Lower Track Rollers

Rubber Tracks, 12.6 Standard, 15" Optional

Two Speed Travel System

Automatic Wet Disk Parking Brake

Kubota 4 Hydraulic Pump

2 Gear, 2 Variable Displacement Pumps

Hydraulic Joystick Controls, Optional Multi-Function Grips

ISO Operating Pattern

Hand and Foot Throttle Controls

BID SPECIFICATIONS

2026 KUBOTA SVL75-3

Electronic Travel Torque Management

Automatic Glow Plugs

7" Multifunction Touch Screen

Integrated Rear Camera

Keyless Start

Self-Bleed Fuel System

2 Front and 2 Rear LED Working Lights

Gauges and Warning Lights

Horn and Backup Alarm

Lockable Fuel Cap

Bolt On Grab Handles to enter machine

ENGINE

V3307 Kubota CR-TE4 Tier 4 Final Diesel Engine

4 Cylinder, 4 Cycle, Turbo Charged

74.3 Gross HP @ 2400 rpm (SAE J1995)

DIMENSIONS

Cab Height 81.8"

Width (without attachment) 65.9"

Width with wide track options (without attachment) 69.1"

Length (without attachment) 112"

Length of Track on Ground 56.5"

OPERATIONAL DIMENSIONS

Operating Weight*, SVL75-3H, 12.6" Rubber Tracks, Open

ROPS/FOPS Cat…....................................................................................................................................9,190 lbs.

Mechanical Quick Coupler…...............................................................................................................2,490 lbs.

Rated Operating Capacity (@35% of Tipping Load…..............................................................................3,557 lbs.

Tipping Load….........................................................................................................................................7,112 lbs.

Auxiliary Hydraulics Flow (Low Flow/High Flow)….........................................................................19.2/29.8 gpm

Travel Speed (Low/High)….................................................................................................................5.6/8.6 mph

Reach @ Maximum Height….........................................................................................................................39.6"

Height to Hinge Pin…...................................................................................................................................122.7"

Ground Pressure (Standard Track)…............................................................................................................5.8 psi

Ground Pressure (Wide Track)…..................................................................................................................4.7 psi *includes operator's weight, 175 lbs.

Base Warranty 2 year/2000 hours Full Machine Coverage & 5 Year 3000 hour Emission Coverage

Full Machine Extended Warranty Options: 1 additional year $1250.00 or 2 years additional coverage $2200.00

K-Maintenance: 2 Yr 500 hr. $3,195.64 or 2 years 1000 hr. $5,987.80

BID PROPOSAL

BID PROPOSAL FOR: 2026 KUBOTA SVL75-3

IN ACCORDANCE WITH THE INSTRUCTION TO BIDDERS AND

SPECIFICATIONS WE HEREBY PROPOSE TO FURNISH ALL LABOR AND

MATERIALS REQUIRED BY THE CONTRACT DOCUMENTS AS FOLLOWS:

Vehicle Year ______________________________________________

Vehicle Make ______________________________________________

Vehicle Model ______________________________________________

Total Delivered Price ______________________________________________

Date(s) of Delivery ______________________________________________

Company Name ______________________________________________

Company Address ______________________________________________

Signature and Title of Authorized Representative Date

BID BOND REQUIRED NO

PERFORMANCE BOND REQUIRED NO

TOWN OF BRANFORD

OFFICE OF THE TREASURER

1019 Main Street

Post Office Box 150 (203) 488-8394

Branford, CT 06405 FAX: 315-3736

General Requirements for Bidding and

Instructions to Bidders

NOTICE

Information provided in these specifications is CONFIDENTIAL and is to be used only for the purpose of preparing a proposal. It is further expected that each bidder will read these specifications with care, for failure to meet every one or a combination of specified conditions may invalidate the proposal.

The Town reserves the right to reject any or all bids or any portion thereof and to accept the bid deemed to be in the best interest of the Town of Branford.

Bidders are requested to submit quotations on the basis of these specifications. Alternate quotations will receive consideration providing such alternatives are clearly explained.

The information contained herein is believed to be accurate and is based upon the latest available information but is not to be considered in any way as a warranty.

Revised 10/2024

Standard Form

SECTION I - General Terms and Conditions

A. Compliance with Laws

The bidder shall at all times observe and comply with all laws, ordinances and regulations of the federal, state and local governments, which may in any way affect the preparation or the performance of the contract.

B. Timetable

Price quoted must be valid for 60 days. Delivery and installation completion dates must be included in the bid proposal.

C. Consideration of Proposals

The Board of Selectmen, or a majority of them, reserve the right to select or reject alternate proposals; to waive informality in proposals; and to reject any and all bids, or accept such bid as shall in its judgement be to the best interest of the

Town of Branford.

D. Bid Bond **NOT REQUIRED**

1. A certified check made payable to the “Treasurer, Town of Branford”, or a satisfactory bid executed by the bidder and a surety company in an amount no less than five percent (5%) of the base bid, may be required with each proposal.

2. If the bid bond is submitted by a certified check the Town of Branford will issue a refund of the bid bond to unsuccessful bidders within fifteen (15) business days of the bid award.

E. Performance Bond **NOT REQUIRED**

Successful bidders may be required to furnish a Performance and Payment Bond in the amount of 100% of the contract sum.

F. Protection of Work and Property

Successful bidders shall be responsible for protection of their equipment and materials against theft, damage or deterioration on the site.

G. Competency of Bidders

1. Bidders shall have proven experience in the field of work.

2. Bidders shall submit with their bid a listing of recent work performed within the State of Connecticut of the size equal to or greater than the work being bid.

H. Alternates

1. Any alternates to specified materials or workmanship must be separately listed and described in detail.

2. Alternates will be considered in awarding the contract only if they provide, as a minimum requirement, all features contained in the specifications.

3. The Town of Branford reserves the sole right to determine through its agents the equality of alternate products and/or installation procedures.

I. Bid Requirements

1. Each bidder shall return two (2) copies of the proposal sheet entitled “Bid

Proposal”. Each bid proposal must be signed by an authorized agent of the bidder.

2. Each bidder must complete and have notarized with a notary seal the

“Non-Collusion Affidavit of Bidder” form. This form must accompany all bids being submitted.

3. Each bidder must be in good standing with the Town of Branford.

4. Successful bidders must obtain any required governmental approvals.

J. Specifications – General

The contract shall include all labor and materials, tools and equipment and services required for proper performance of the work as specified hereinafter and as may be required for proper completion of the work in accordance with the highest standards of the trades involved.

K. Examination of Site

Prior to submission of the bid, contractor shall visit the site, consult with the supervisor, and become thoroughly familiar with all conditions under which the work will be installed. The contractor will be responsible for any assumptions made regarding the site for the work to be performed.

SECTION II - Insurance Requirements

Bidder shall agree to maintain in force at all times during which services are to be performed the following coverages and shall name the Town of Branford as an Additional Insured on a primary and non-contributory basis to the Bidder’s Commercial General Liability and Automobile

Liability policies. These requirements shall be clearly stated in the remarks section on the bidders Certificate of Insurance. Insurance shall be written with Carriers approved in the

State of Connecticut and with a minimum Best’s Rating of “A”VIII-. In addition, all Carriers are subject to approval by the Town of Branford.

(Minimum Limits)

General Liability Each Occurrence $1,000,000

General Aggregate $2,000,000

Products/Completed Operations Aggregate

$2,000,000

Excess/Umbrella Liability Each Occurrence $1,000,000

Aggregate $1,000,000

Professional Liability Each Occurrence $1,000,000

Cyber Liability (1) Each Occurrence $1,000,000

Workers’ Compensation and Employers’ Liability (2)

WC Statutory Limits

EL Each Accident $500,000

EL Disease Each Employee $500,000

EL Disease Policy Limit $500,000

If any policy is written on a “Claims Made” basis, the policy must be continually renewed for a minimum of two (2) years from the completion date of this contract. If the policy is replaced and/or the retroactive date is changed, then the expiring policy must be endorsed to extend the reporting periods for claims for the policy in effect during the contract for two (2) years from the completion date.

Original, completed Certificates of Insurance must be presented to the Town of Branford prior to purchase order/contract issuance. Bidder/Contractor/Vendor agrees to provide replacement/renewal certificates at least 30 days prior to the expiration date of the policies.

Should any policy be cancelled for nonpayment of premium, 10 days written notice must be provided to the Town. Should any of the policies be cancelled for other reasons, limits reduced or, coverage altered, 30 days written notice must be given to the Town.

Notes

(1) Cyber Liability is required if Contractor is on Town’s network or houses Town information on their network.

(2) Workers Compensation is required if employees come onto Town property.

Hold Harmless Requirements

The contractor shall, at all times, indemnify and save harmless the Town of Branford, its officers, agents, and servants on account of any and all claims, damages, losses, litigation expense, counsel fees and compensation arising out of injuries (including death) sustained by or alleged to have been sustained by the public, any or all persons affected by the contractor’s work, or by the contractor, any subcontractor, material, men or anyone directly or indirectly employed by them or any one of them while engaged in the performance of this contract. The Town of

Branford shall be named as an additional insured on said policy of public liability insurance to cover all claims against the Town arising out of said contract.

NON-COLLUSION AFFIDAVIT OF BIDDER

State of:

County of: , SS)

; being first duly sworn, deposes and says that:

1) S/he is (owner, partner, officer, representative or agent) of , the Bidder that has submitted the attached Bid:

2) S/he is fully informed regarding the preparation and contents of the attached Bid and of all pertinent circumstances regarding such Bid:

3) Such Bid is genuine and is not a collusive or sham Bid:

4) Neither the said Bidder nor any of its officers, partners, owner, agents, representatives, employees or parties in interest, including this affiant, has in any way colluded, conspired, connived, or agreed, directly or indirectly with any other Bidder, firm or person to submit a collusive or sham

Bid in connection with the Contract for which the attached Bid has been submitted or to refrain from bidding in connection with such Contract, or has in any manner, directly or indirectly, sought by agreement or collusion or communication or conference with any other Bidder, firm or person to fix the price or prices in the attached Bid or of any Bidder, or to fix any overhead, profit or cost element of the bid price or the bid price of any other Bidder or to secure through any collusion, conspiracy, connivance or unlawful agreement any advantage with the Owner or any person interested in the proposed Contract.

5) The price quoted in the attached Bid is fair and proper and is not tainted by collusion, conspiracy, connivance or unlawful agreement on the part of the Bidder or any of its agents, representatives, owners, employees, or parties in interest.

Signed:

Title:

Subscribed and sworn before me this day of , 20 .

Notary Public: NOTARY SEAL

My Commission expires , 20 .

Each bidder must complete and have notarized with a notary seal the “Non-Collusion Affidavit of Bidder” form.

This form must accompany all bids being submitted.

8.NonCollusion Affidavit revised 7-25-24