Purchase Description_W912PB-23-R-3027.pdf

Description

John Deere tractor 6R 250 or equal with protective equipment

AutoPowr / IVT - 50 km/h

Continuously variable transmission with automatic engine-transmission management.

With accelerator pedal mode incl. transmission/hydraulic oils - Bio Hy – Gard

Answer: In accelerator pedal mode, the driver can adjust the tractor’s ground speed independently of the engine speed. The driving speed is controlled by the foot accelerator, while the hand throttle regulates the engine speed.

BioHy-Gard II Answer: Hydraulic oil is used to lubricate the travel drive and to control the hydraulic functions of the tractor. Hy Gard is the name of the original John Deere oil, it is also possible to use a biological hydraulic oil (Bio Hygard)

ComfortView™ cab, with Command PRO™.

With front and rear windshield wipers and Disc washer tank capability, Front and rear sunshades, interior mirror, front passenger seat, two roof storage compartments, storage box left with 3-pin power outlet, cup holder (in right-hand control console), cigarette lighter and ashtray, rear license plate holder, tool box, Camera preparation incl. camera for front and rear (Rüfa)

Electro-hydraulic rear axle differential lock with oil-cooled clutch

3-pin socket, 7-pin signal interface socket, multiple socket strip, alternating current mains socket

Air comfort seat with CommandARM™.

Grammer seat MSG 97EL with seat top Evolution 741 and two-way adjustable backrest

Air suspension, with driver presence switch.

Low frequency damping, automatic adjustment to driver weight, adjustable seat cushion, tilt and length adjustment, side suspension, Longitudinal suspension, air-suspended lumbar support, carbon fiber layer, seat heating, seat ventilation and wider suspension

Mirror, wide angle.

Left and right electrically adjustable telescopic mirrors, heatable, two mirrors each, with lower wide-angle mirror.

Panoramic windshield with left B-pillar.

Windshield cannot be opened out. Opening panoramic door on right panoramic door, left door on B-pillar.

Hands-free kit

Bluetooth enabled as well as microphone.

Rack and pinion rear axle

All-wheel drive front axle - TLS Plus with brakes

TLS Plus front axle suspension With limited slip differential

Complete forest wheel 710/70R42

On rigid fully welded forest rim

Tires TL, Forst Rider,Steel Belted, Nokian

6208 Complete forest wheel 600/70R30 on rigid fully welded forest rim welded forest rim

Tires TL, Forest Rider, Steel Belted, Nokian

1 spare wheel rear complete (tires like standard tires)

1 spare wheel front complete (tires like standard tires

Tire size Front size 600/70R30 Rim: Welded rim TL20x30

Tire size Rear size 710/70R42 Rim Welded rim TL23x42

Hydraulic top link Oberlenker Hydraulischer Hydraulic top link

Oberlenker mechanisch Mechanical top link

Lower link with catch hook - category 3N

With wear plates for reduced wear.

Stabilizer struts - hydr. Dopple pivot adjustment.

Required when 710 mm or 800 mm rear tires are ordered. are ordered.

The lower links are automatically locked hydraulically at an adjustable lifting height. Due to the double pivoting, you can switch from category 3 to 2 without tools.

Rear PTO - 540E/1000/1000E

Electrically shiftable

Supplied with 35 mm PTO stub with 6 and 21 teeth. Supplied Zapfwellenstummel 6 Zähne stub with 6 teeth

Zapfwellenstummel 21 Zähne stub with 21 teeth, We need two for different attachment

Hydraulic pump - 160 l/min

85 cc pump, PFC system, 160 l at 1,500 rpm Incl. additional tank 160 liters The standard quantity of hydraulic oil is 160 liters and is located in the gearbox housing.

We have a trailer who need 55 liters for the hydraulic tipping system

4 electronic ZSG - Premium

Premium coupler with relief levers for pressure reduction 4 ZSGs 450 series

Auto Trac ™- Preparation

4600 Processor

Command Center Control elem.

4600 Command Center

With a 10.4-inch touchscreen color monitor, compatible with 4600 processor.

Ultimate - Activation 3.5 6000 StarFire receiver

JD Link for diagnostics

Roof hatch Roof hatch= Skylight

The roof window is intended as an emergency exit.

Electric joystick

Can be configured for ISOBUS or tractor functions (front loader, ZSGs, AutoTrac, iTEC, power lift) can be configured.

Air conditioning

Enables automatic adjustment of the air conditioning to changing outdoor conditions

Bottle holder

Floor left installation location

Cooler compartment

Converts the left storage compartment to a cool box

Reversing alarm

100% differential lock in front axle

Fully mechanically lockable front axle differential

Pneumatic trailer brake system, 2 lines.

Includes air dryer and clutch

ABS trailer socket ABS Steckdose ABS trailer socket

Front fender all-wheel - swiveling

Adjusted to front tire size.

Battery - circuit breaker

Lighting package - Ultimate

Standard lighting +

Change of headlights in the hood (except for low beam) to LED (A)

Two fixed LED working lights in the front of the roof (G) Four adjustable LED worklights in the front of the roof (H, I) - change of standard HB3 lighting to LED

Two fixed LED worklights on the side of the roof (L) Four adjustable LED worklights at the rear in the roof (N, O) - change of standard HB3 lighting to LED

Two rear fender worklights - LED Step lighting on the left side

Two H4 repeater driving lights at mid-height on cab post

If a front loader or front linkage is fitted, the driving lights can be switched on and off by the front loader or an by the front loader or an implement. For safety, the headlights supplied with this code the function of the headlights mounted on the radiator grille. headlights.

Rotating warning light LED

Left and right front mounted on the cabin roof

Balls with catch trays

Holder at the rear of the tractor, for up to three balls (guide balls and catch hooks)

If neither guide balls nor catch hooks are ordered, the holder fits category 3.

3-in-1 rail system - hitch with ball

Hitch with ball at least 4 000 kg vertical load

Automatic hitch insert for 3-in-1 rail system - 38 mm bolt.

Requires 3-in-1 rail system.

Hitch insert for use with 3-in-1 rail system.

Fender control for electr. 3dw The hydraulic upper link in the rear is operated remotely using button functions are operated by the 3rd double-acting control unit.

Ultimate front linkage

Dedicated front linkage valve, remote control buttons on front linkage, Position control, integration with iTEC (HMS™), electronic single action/double action, 3-pin socket (12 V) for power supply to implement control units, front top link with category 3 hooks and dedicated front E-SCV with connection couplings and pressureless return

LS connections at the front LS connections consist of 3 lines, 1 pressure 1 return line and 1 control line and are used to supply oil to front-mounted attachments.

2. front control unit via diverter valve Front control devices are used to operate or control front attachments and are double-acting here.

This allows cylinders to be moved in and out.

Top link front with hook cat. 3

If a top link with cat. 3 hooks is ordered, this replaces the top link with cat. 2 balls. Supplied with more stable bearing support

The top link at the front is designed with catch hooks in category 2 on the tractor side and in category 3 on the attachment side.

Front PTO

Clockwise direction of rotation (right in direction of travel).

Preparation for Power Beyond auxiliary pressure supply - rear

Allows hydraulic oil to be supplied to implements with own spool valves or hydraulic motors.

Four separate connections at the rear of the tractor: Pressure

(P), load sensing (LS), return (R) and unpressurized return (D). return (D).

All connections without couplings, closed with plugs

Tractor Implement Automation - Tractor Activation

Activates the tractor for TIA, for setup an

Activation code must be requested from StellarSupport for setup. For full functionality, TIA-enabled

TIA activation is also required for TIA enabled implements.

iTEC - Headland Management System

With AutoLearn self-learning capabilities. Autolearn is a system with self-learning functions, that provides a user-friendly headland management system. Automatic sequencing of tractor functions, normally associated with headland maneuvers.

iTEC is compatible with the 4th generation CommandCenter.

For complex functions such as automatic steering please activate for AutoTrac Ready (code 1832) and for iTEC Pro

2 wheel chocks

Toolbox Answer: The toolbox for tool is at the tractor The location is different

License plate holder - front

Mounted on exhaust pipe in reinforced version

Integrated Service Center

Accessible via CommandCenter Gen. 4 display. Includes

Electronic level sensing for engine oil and coolant.

Instruction of the operating personnel at the USAG Bavaria,DPW Grafenwoehr, TAM Section.

Protected cabin of the company Rheinmetall Defence

Delivery of a splinter-protected cabin of the tractor John Deere model 6 R, incl. underbody plate for the whole vehicle.

Design and achieved protection level of the protected cabin.

the minimum requirements of protective measures of the Berufsgenossenschaft Bau, anchored in DGUV - 1 201 - 027 (previously BGI 833) chap. 5.1.3., are met in full

The protected cabin has been certified by the Beschußamt Ulm in accordance with VPAM7 (civil protection standard at level 7) with a protection coverage of 100 %.

The splinter protection is leant at the main surfaces or comparable with NATO standard.

The targets fully comply with Level 2 of the NATO standard STANAG 4569 and are TL 23509-0006 according to AEP 55 Vol. 1 by the Wehrtechnische Dienststelle 91, Meppen, Germany.

The qualification (see above) and evaluation (see below) are based on a threat situation from the ground. assumed. The roof of the protected cabin is not protected against the threat of splinters.

The qualification (see above) and evaluation (see below) are based on a threat situation from the ground. assumed. The roof of the protected cabin is not protected against the threat of splinters.

For the threat "8.8" World War II flak ammunition with a diameter of 8.8cm, the splinter protection splinter protection is understood as a complete system (complete vehicle with chassis) and is with stronger armor steel plates compared to the above qualification and examined in a quantitative test procedure.

testing procedure.

The effectiveness of the protection will be demonstrated quantitatively in real blasts with representative 8.8 ammunition.

effectiveness of the protection.

The statement of the ZMK, the TÜV acceptance, as well as a short description of the cabin on the subject of maintenance and care and a rescue card.

Camera preparation incl. 3 camera for front and rear incl. monitor

Ritter reverse drive system (version with joystick)

Joystick on armrest, confirmation for load shift, reverse shift, engine speed, steering proportional, EMERGENCY - OFF Turning - side shifting for existing driver's seat Cab extension left, brake (dynamic) via foot pedal, rear cabin floor level relocation air conditioning/heating TÜV acceptance

Execution of driver instruction according to UVV (BGI Municipal plate size 3-5 (Sauter) Axle support

833) Electric door closing system

Emergency exit (procedure)

Field of vision restriction (mirrors, camera system, all-round vision)

Municipal plate size 3-5 (Sauter) Axle support

Offer notes:

Offer incl. warranty extension 1+4 years a' 750 pcs ( 3750 pcs) and maintenance contract up to and including 3750 pcs.

Documentation

Repair manual in German and English, 3 EA.

Spare / Replacement part list in German and English, Handbook or CD, 3 EA.

Delivery / Instruction The tractor must be fully assembled and functional at the factory to be delivered Including all necessary attachments.

Instruction and demonstration for the operating personnel within 4 days of delivery by qualified personnel from the manufacturer and after appointment.

Duration of instruction and demonstrattion ca. 6 hours in German

Delivery address:

USAG Bavaria

DPW, BUILDING & GROUNDS BRANCH

Range Maintenance

Grafenwöhr, Geb. 330

92655 Grafenwöhr