Purchase Description (W80RA6-15-26C).docx
DOCX document 17 KB Posted
- Attached to
- Windowless Gas Proportional Detector
- Solicitation number
- PANRSA26P0000037535
About this file
This is a Purchase Description document supporting a Request for Information (RFI) issued by the U.S. Army Contracting Command-Redstone in support of the U.S. Army Test, Measurement, and Diagnostic Equipment Activity (USATA). The RFI seeks market research and capability information regarding Windowless Gas Proportional Detectors, classified under NAICS code 334515 (Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals) and PSC code 6625 (Electrical and Electronic Properties Measuring and Testing Instruments). The response deadline is June 24, 2026, at 2:00 PM Eastern Time. This is a preliminary market research effort conducted in accordance with FAR 15.201(e) and does not constitute a commitment to contract or a formal Request for Proposal. The contracting office is the Army Contracting Center-Redstone (CCAM-CAC-B), with primary points of contact including Contracting Officer Portia R. Sampson (256-955-9135, portia.r.sampson.civ@army.mil) and Contract Specialist Skylar R. Summ.
Respondents should note that this RFI is voluntary with no compensation for information provided, and non-response does not preclude participation in any future solicitation. If a formal RFP is issued, it will be posted on SAM.gov, and potential offerors are responsible for monitoring the site for updates. The government reserves the right to use submitted information for internal planning and evaluation purposes without obligation to the respondent.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Request for Information - Windowless Gas Proportional Detector.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Purchase Description Procurement of Windowless Gas Proportional Detector
The U.S. Army TMDE Activity (USATA) has a requirement to purchase a brand name purchase of one (1) Windowless Gas Proportional Detector will be used to calibrate Large Area Alpha and Beta plated sources. This item shall be delivered to the Army Primary Standards Laboratory (APSL), Building 5435 Fowler Road, Redstone Arsenal, AL. The Windowless Gas Proportional Detector shall include the following specifications or equivalent (if not brand name):
Requirements:
Model 43-135-1 Qty:1 Windowless Gas Proportional Detector
· 0.025 mm (0.001 in.) platinum on 25-mm (1-in.) spacing, mounted on Teflon insulated posts
· 6 mm (0.25 in.)
· Less than 2500 VDC
· 200 volts with a slope of approximately 1%
· Hermetically sealed MHV connector
· Viton O-ring
· Typically -5 mV for gross counting instrument
· 4 to 30 PSI (27 to 207 kPa)
· 45 PSIA (310.3 kPa)
1.0 Delivery Requirements
Shipping Address: U.S. Army TMDE Activity, Attn: Santosh Parakkal, Building 5435, Redstone Arsenal, AL 35898
File details come from the government source that posted it. Updated .