Purchase Description (W80RA6-12-25C).pdf
PDF 102 KB Posted
- Attached to
- Mass Comparator
- Solicitation number
- PANRSA-25-P-0000-011163
About this file
This Purchase Description document outlines the U.S. Army TMDE Activity's (USATA) requirement to procure two MCM5004 Manual Mass Comparators or equivalent units for life cycle replacement. The Mass Comparators must have specific technical capabilities, including a maximum measurement capacity of 5 Kg with 0.1 mg readability, repeatability of 0.5 mg or better, a digital readout display, internal calibration adjustment, off-center loading compensation, and the ability to complete E1 calibrations at a 5 kg load with stabilization in less than 4 seconds.
The equipment will be delivered to USATA's Army Physical Standards Labs at Building 5435, Fowler Road, Redstone Arsenal, with the specific shipping address listing the U.S. Army TMDE Activity, Attn: Bradford Suggs, Building 5435, Redstone Arsenal, AL 35898. This procurement is part of a special notice (Solicitation Number PANRSA-25-P-0000-011163) issued by the Department of the Army Materiel Command Contracting Command Redstone Arsenal to conduct market research and identify potential sources for the Mass Comparators.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Request for Information (W80RA6-12-25C).pdf | ||
| Request for Information (W80RA6-12-25C).pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Purchase Description Procurement of Manual Mass Comparators
The U.S. Army TMDE Activity (USATA) has a requirement to implement a brand name purchase of two (2) MCM5004 Manual Mass Comparators or equivalent that will be a life cycle replacement of an existing model that is becoming inoperable. The unit shall be delivered to USATA’s Army Physical Standards Labs located at Building 5435, Fowler Road Redstone Arsenal. The Mass Comparators will also include the additional measurements to support USATA’s mission as follow:
1.0 Requirements:
• Maximum measurement capability of 5 Kg, with a readability of 0.1 mg,
• Repeatability of 0.5 mg or better, and a digital readout display.
• Comparator must have the capability to complete an internal calibration adjustment and provide compensation for off center loading.
• Comparator must also be able to complete E1 calibrations at a 5 kg load and provide stabilization in less than 4 seconds.
2.0 Delivery Requirements
Shipping Address: U.S. Army TMDE Activity, Attn: Bradford Suggs, Building 5435, Redstone Arsenal, AL 35898
| Purchase Description |
| 1.0 Requirements: |
| Maximum measurement capability of 5 Kg, with a readability of 0.1 mg, |
| Repeatability of 0.5 mg or better, and a digital readout display. |
| Comparator must have the capability to complete an internal calibration adjustment and provide compensation for off center loading. |
| Comparator must also be able to complete E1 calibrations at a 5 kg load and provide stabilization in less than 4 seconds. |
| 2.0 Delivery Requirements |
File details come from the government source that posted it. Updated .