PURCHASE DESCRIPTION Polyurethane 3D Printer.docx
DOCX document 33 KB Posted
- Attached to
- 15570 - Chromatic Printer Upgrade & Support
- Solicitation number
- FA8227-26-Q-1005
About this file
This is a Purchase Description document for polyurethane 3D printer support required by the RAPID Innovation Center at Hill Air Force Base, Utah, dated January 15, 2026. The Air Force Materiel Command Air Force Sustainment Center seeks continued support for a Chromatic RX Flow 7000 polyurethane 3D printer to expand additive manufacturing capabilities and increase flexible parts production. The required deliverables include printer support components (tip wipe, tip setter with purge calibration fixture, touch probe, new configuration files, and C3DM technician installation), a minimum of 100 print tips, and a minimum of 14.4 liters of material. The contractor must provide Windows 11-compatible software for building preparation and printer operation, along with on-site training at Hill AFB for a minimum of six trainees over at least two days, covering equipment operation, software use, calibration, maintenance, and accessories to enable independent operation.
The contract includes a one-year warranty beginning from final acceptance date, during which the contractor must repair any defects in materials, workmanship, or product performance at no cost to the Government, and provide all software updates. Delivery is required to Building 205, Room 22, 5925 Southgate Avenue, Hill AFB, Utah 84056, with electronic correspondence directed to Rulon Stitzer at Rulon.stitzer@us.af.mil. The related solicitation number is FA8227-26-Q-1005, issued under the designation 15570 - Chromatic Printer Upgrade & Support.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 15570 - Chromatic Printer upgrade support SSJ.pdf | ||
| 15570 - Combo Chromatic Printer Upgrade-Support.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PURCHASE DESCRIPTION
FOR
POLYURETHANE 3D PRINTER SUPPORT
January 15, 2026
Rulon Stitzer
809 MXSS/MXDTAD
1.0 DESCRIPTION OF REQUIREMENTS
The RAPID Innovation Center at Hill AFB, UT has a need for continued support for its polyurethane 3D printer to expand additive manufacturing capability and to increase flexible parts capability.
2.0 TECHNICAL SPECIFICATIONS
The 3D printer support must meet the following technical specifications:
· Support must be suitable for Chromatic RX Flow 7000
· Tip Wipe
· Tip setter + purge calibration fixture
· Touch Probe
· New config files (software)
· C3DM technician install
· 4K hardware and soft
3.0 REQUIRED ACCESSORIES
The following accessories shall also be included:
· 100 print tips minimum
· 14.4 L of material minimum
4.0 SOFTWARE
The contractor will provide all required software for building preparation and printer operation. The software must be:
· Compatible with Windows 11 or newer
5.0 TRAINING
The contractor will provide training that meets the following requirements:
· Minimum of six (6) trainees
· Minimum of two (2) days
· Thoroughly cover the equipment, software, calibration, maintenance, and accessories so that a user at the end of the training can operate independently
· Be conducted at Hill AFB, UT
6.0 WARRANTY/MAINTENANCE
The contractor shall provide:
· One (1) year warranty which warrants all products provided under this contract, under normal use, free from defects in materials and workmanship and that system will perform its design function for a period of no less than one (1) year. Warranty period to start from date of final acceptance. Any defects in materials or workmanship or failure of any product or component to perform its designed function during the warranty period shall be fixed by the contactor at no additional cost to the Government. Any software updates shall also be included during the warranty period.
7.0 DELIVERY ADDRESS
Physical Address:
| ATTN: Rulon Stitzer |
| 5925 Southgate Ave. |
Bldg. 205 Room 22
HILL AFB, UT 84056
Email address for electronic delivery:
Rulon.stitzer@us.af.mil
File details come from the government source that posted it. Updated .