PURCHASE DESCRIPTION 3D Scanner CMM.docx
DOCX document 33 KB Posted
- Attached to
- Brand Name 3D Scanner Keyence
- Solicitation number
- FA822723Q40012
About this file
This document is a Purchase Description for a 3D Scanner Coordinate Measuring Machine (CMM) required by the RAPID Innovation Center at Hill AFB, UT. The 3D scanner CMM must have an integrated scanner and 360-degree motorized measurement stage, 10 m measurement accuracy, fully automated 3D scanned data to .stp file conversion capability, and a measurement stage up to 500 mm. Required accessories include a measurement controller, calibration board, and measurement stage light blocking curtain. The contractor must provide compatible Windows 10 software with unlimited paid-up licenses and offline operation capability. Initial on-site familiarization and unlimited technical support are also required, along with a one-year warranty.
This Purchase Description supports the related Federal Contract Opportunity FA822723Q40012 for a Brand Name 3D Scanner, issued by the Department of the Air Force Materiel Command Air Force Sustainment Center.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Combined Synopsis 3D Scanner.docx | DOCX document | |
| Combined Synopsis 3D Scanner.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PURCHASE DESCRIPTION
FOR
3D SCANNER CMM
November 7, 2023
Dallin Krebs
809 MXSS/MXDTAD
1.0 DESCRIPTION OF REQUIREMENTS
The RAPID Innovation Center at Hill AFB, UT has a need for a 3D scanner CMM with fully automated CAD conversion capability. The 3D scanner CMM will be used to expand reverse engineering capacity and expedite reverse engineering services in the RAPID Innovation Center.
2.0 TECHNICAL SPECIFICATIONS
The 3D scanner CMM must meet the following technical specifications:
· Integrated scanner and 360° motorized measurement stage unit not to exceed a 36” x 36” x 36” envelope (tabletop unit)
· ±10 µm measurement accuracy
· Capable of fully automated 3D scanned data to .stp file conversion
· Ø500 mm measurement stage
· Capable of full color scanning
3.0 REQUIRED ACCESSORIES
The following accessories shall also be included:
· Measurement controller
· Calibration board
· Measurement stage light blocking curtain
4.0 SOFTWARE
The contractor shall provide all required software for scanner operation and automated scan to CAD conversion. The software must be:
· Compatible with Windows 10 or newer
· Unlimited number of fully paid-up licenses
· Capable of offline operation
5.0 FAMILIARIZATION/SUPPORT
The contractor shall provide an initial product familiarization and unlimited product support. The familiarization and support must include:
· Initial on-site scanner and software setup and familiarization for up to six (6) government employees
· Unlimited access to online training suite
· Unlimited one-on-one technical support by phone and remote desktop
· Troubleshooting
· Application and project support
6.0 WARRANTY/MAINTENANCE
The contractor shall provide:
· One (1) year warranty which warrants all products provided under this contract, under normal use, free from defects in materials and workmanship and that system will perform its design function for a period of no less than one (1) year. Warranty period to start from date of final acceptance. Any defects in materials or workmanship or failure of any product or component to perform its designed function during the warranty period shall be fixed by the contactor at no additional cost to the Government.
7.0 DELIVERY ADDRESS
Physical Address:
| ATTN: Dallin Krebs |
| 5925 Southgate Ave. |
Bldg. 205, Room 22
HILL AFB, UT 84056
Email address for electronic delivery:
dallin.krebs@us.af.mil
File details come from the government source that posted it. Updated .