STATE OF FLORIDA DEPARTMENT OF TRANSPORTATION

FDOT DESCRIPTION OF INTENDED

SINGLE SOURCE PURCHASE

(PUR 7776)

375-040-53

PROCUREMENT

03/19

PUR 7776 (rev.10/14) Page 1 of 2 60A-1.010, F.A.C.

AGENCY: DEPARTMENT OF TRANSPORTATION

TITLE: Drill Rig purchase

Short description of the commodity or service desired: Boring and Subsurface Exploration Drill Machine

CONTACT

Name: Destyne Grayson

Address: 605 Suwannee St. MS 20 Tallahassee FL, 32399-0450

Telephone: (850) 414.4253

Email: CO.Purch@dot.state.fl.us

Internal tracking number, if any: DOT-SS-27-9015-DG

Date posted: Last day for receipt of information:

This description of commodities or contractual services intended for purchase from a single source is posted in accordance with section 287.057(3)(c), Florida Statutes and will remain posted for a period of at least 15 business days.

Commodity or Service Required (commodity class and group, manufacturer, model, and description, as appropriate):

20111500 - Drilling and exploration equipment

20111600 - Drilling and operation machinery

20121500 - Conventional drilling tools

20122800 - Drilling and workover rigs and equipment

Quantity or Term (as appropriate): 1 (One) Drill Rig

Requestor (division, bureau, office, individual, as appropriate): Melanie Sowers, State Materials Office

Performance and/or Design Requirements (intended use, function or application, compatibility etc. requirements; reference to policy, rule, statute or other act of the Legislature, etc., as appropriate): This equipment shall be used for soil sampling, foundation testing, monitoring well installation and subsurface exploration work. The drill machine shall be capable of performing auger borings in unconsolidated formations with hollow-stem augers. The drill shall have the capability of productively using currently popular geoexploration methods and techniques that include shelby tube or continuous tube sampling and standard penetration testing. The drill shall be capable of coring or rotary drilling applications. Please see the attached specification pages.

Intended source (vendor, contractor): Central Mine Equipment, Company.

Estimated Dollar Amount: $574,195.00

Justification for single source acquisition (what is necessary and unique about the product, service or source; steps taken to confirm unavailability of competition, as appropriate): Central Mine Equipment Company, is the sole manufacturer of this rig and no other manufacturer produces one meeting the Department's specifications..

Approved By: (names & titles, as appropriate to Post on Vendor Bid System (VBS), e.g., requestor, requestor management, information systems, budget, purchasing):

Authorized Signature Title

Central Office Legal Review:

Authorized Signature Title

Docusign Envelope ID: 8FFFDA88-6F67-894A-800E-9AB141F0441B

State Purchasing Administrator

Assistant General Counsel

8.27.2026 9.18.2026

STATE OF FLORIDA DEPARTMENT OF TRANSPORTATION

FDOT DESCRIPTION OF INTENDED

SINGLE SOURCE PURCHASE

(PUR 7776)

375-040-53

PROCUREMENT

03/19

PUR 7776 (rev.10/14) Page 2 of 2 60A-1.010, F.A.C.

Legal review by the Office of General Counsel is required prior to posting. Please coordinate with District Legal

Counsel prior to submission to the Office of General Counsel, MS-58.

Prospective vendors are requested to provide information regarding their ability to supply the commodities or contractual services described. If it is determined in writing by the agency, after reviewing any information received from prospective vendors, that the commodities or contractual services are available only from a single source, the agency shall:

1. Provide notice of its intended decision to enter a single-source purchase contract in the manner specified in s.120.57 (3) F.S.

SPECIFICATIONS FOR BORING AND SUBSURFACE

EXPLORATION DRILL MACHINE

ITEM: One combination auger, core, rotary type boring machine to be mounted on 6 x 4 tandem axle truck shall be required.

INTENT: These specifications describe salient features that shall be required in a combination auger-core-rotary type truck mounted drill unit. The unit shall be completely assembled and ready for operation when delivered.

PURPOSE: This equipment shall be used for soil sampling, foundation testing, monitoring well installation and subsurface exploration work. The drill machine shall be capable of performing auger borings in unconsolidated formations with hollow-stem augers. The drill shall have the capability of productively using currently popular geoexploration methods and techniques that include shelby tube or continuous tube sampling and standard penetration testing. The drill shall be capable of coring or rotary drilling applications.

GENERAL SPECIFICATIONS: The drill shall be a self-contained unit having a single engine power source. The power shall be appropriately directed to the hydraulic system and mechanically-driven drill head. A hydraulically-actuated folding upright drill frame with twin hydraulic feed cylinders shall be supplied. The assembled drill with its complement of auxiliary equipment shall be so arranged that work may be carried on with optimum efficiency and a minimum of manual labor. All parts, materials and workmanship shall be of the highest quality recognized by the trade. The drill unit shall be thoroughly field tested and ready for immediate and continuous operation at time of delivery. The equipment proposed must be a current model under standard production, being produced in quantity for national distribution. The manufacturer must have a minimum of three years production experience designing and manufacturing this type of equipment. The drill shall have been in production for at least two years. Dealer or vendor modifications to a non-conforming model for the express purpose of meeting minimum specification requirements will not be acceptable. Parts and accessories shall be stocked and readily available from the successful vendor. The drill unit shall be furnished with all standard equipment advertised whether or not specifically called for here, except where optional or conflicting equipment is specified. The drill shall meet the following specifications.

ROTARY DRIVE: The drill transmission shall have at least five speeds forward and one speed reverse. The transmission shall be mounted stationary on the drill main base frame

DOT-SS-27-9015-DG

Drill Rig Specifications

Florida DOT CME 55 Tier ads4f February 26, 2025 with a heavy-duty 13 inch diameter clutch immediately adjacent to the transmission power input. The maximum drill spindle torque shall exceed 9,425 foot-pounds in first gear. Rotational speeds of the drill spindle shall range from at least 95 RPM in first gear to more than 665 RPM in fifth gear at 2,500 engine RPM. The spindle shall be hollow with at least a 2-3/4 inch ID. The output of the transmission shall power a single speed right angle drive. The right angle drive output shall turn a rotary drive bar that has a square cross section of at least 1.75 inches a side and shall be made of heat-treated alloy steel.

The rotary drive bar shall power a rotary box that has flange type bearings that can be greased. The rotary box shall be grease packed and shall not run in oil and shall have removable access panels on the front and rear to facilitate inspection and maintenance procedures.

VERTICAL DRIVE: The vertical drive shall consist of two double-acting hydraulic feed cylinders with an overall stroke or travel of at least 72 inches. The feed cylinders shall have a point of thrust centered upon the axis of the drill spindle. The feed slide bushings shall be split for ease of removal and replacement. The vertical drive shall have a maximum downward thrust of not less than 18,650 pounds and an upward or retract force of not less than 28,275 pounds. The feed cylinders shall have a minimum piston rod diameter of 1.75 inches to withstand compressive forces when retracting augers from the ground without rotation. Hydraulic gauges shall be provided on the control panel at the left rear of the drill to indicate in pounds per square inch the hydraulic feed pressure, hold back pressure and system pressure. Hydraulic controls shall be furnished for varying the feed rate and down pressure. The maximum rate of feed shall not be less than 55 feet per minute down and 35 feet per minute up. A rapid retract capability shall be furnished to increase the rate of retract to a maximum of not less than 90 feet per minute.

Two feed levers shall be provided. One feed lever shall be of the spring return type permitting standard rates of feed and retract. The first feed lever shall not be affected by the dial control settings used with the second feed lever. The second feed lever shall have a detent position and be used for drilling when a controlled rate of feed is required as well as the rapid retract feature. Feed rate, once set, shall not be affected by changes in engine RPM nor by changes in formation resistance unless the adjusted down pressure setting is reached. A feed rate control shall be furnished for changing the rate of feed.

Separate pressure controls shall be furnished for changing the maximum bit pressure and hold back pressure. The feed rate and pressure controls shall be operated by dials located on the front of the control panel within easy reach of the operator.

DRILL POWER UNIT: The power unit shall be a self-contained electric starting, liquid-cooled, heavy-duty 4-cylinder turbocharged and charge-air cooled industrial type diesel engine, having not less than 229 cubic inch displacement and a minimum 120 gross horsepower. The engine shall meet U. S. EPA Tier 4f emission certification. The unit shall be equipped with a heavy-duty dry type two-stage replaceable element air cleaner, DOT-SS-27-9015-DG

Drill Rig Specifications

Florida DOT CME 55 Tier ads4f primary fuel filter with water separator, secondary fuel filter, and a replaceable full flow oil filter. The unit shall have a 12-volt electric starting system consisting of a starter, alternator and battery. The unit shall have a keyed ignition switch, starter switch, and electronic throttle switch on the drill control panel.

The power unit shall be equipped with a dry disc clutch not less than 13 inches in diameter and a transmission having not less than five speeds forward and one reverse. When coupled with the drill unit, the engine shall have sufficient power to meet all requirements listed elsewhere in this specification. The fuel tank shall have a capacity of not less than 40 gallons, locking cover for the fill cap and shall have level indicator sights. Exhaust after treatment systems shall include a 5 gallon diesel exhaust fluid reservoir.

UPRIGHT DRILL FRAME: The upright drill frame shall be hydraulically actuated permitting 90 degree fold over for traveling. The drill frame movement shall be controlled by two 3.00 inch minimum ID double-acting hydraulic cylinders that have a minimum of

1.375 inch diameter piston rods. A restriction shall be provided to prevent the drill frame from falling in an emergency. When in a horizontal position, the drive train shall be disconnected between the rotary drive bar and the right angle drive by use of a quick disconnect method consisting of a flexible chain coupling that will slide off the right angle drive output and onto the drive bar. The depth of the upright part of the base frame shall be at least 10 inches for ample rigidity.

HYDRAULIC SYSTEM: This system shall have a heavy-duty engine driven tandem hydraulic pump run independently of the gear train with a capacities of not less than 25 GPM and 25 GPM at 2,000 PSI. The system shall be equipped with a full-flow replaceable element hydraulic oil filter in the low pressure return line. A high pressure hydraulic oil filter and a hydraulic oil cooler shall be furnished. The hydraulic oil reservoir shall be at least 40 gallon capacity and shall be equipped with a vented filler cap with locking cover, magnetic drain plug and level indicator sights. The hydraulic pump shall be driven from a point in the line of power transmission so that hydraulic power will be available whenever the engine is running.

DRILLER'S CONTROL PANEL: All controls and gauges needed for the various drilling operations shall be placed in such a manner as to be easily accessible and convenient for the drill operator while permitting a view of the drilling operation at all times. The driller's control panel shall be mounted on the left rear of the drill and shall include the following instrumentation and controls:

(a) Keyed ignition switch and starter switch.

(b) Push-button emergency engine shut-off switch.

(c) Engine throttle switch.

DOT-SS-27-9015-DG

Drill Rig Specifications

Florida DOT CME 55 Tier ads4f

(d) Transmission gear selector, lock-out clutch handle and auxiliary spindle brake set valve.

(e) Engine ECM diagnostic module to monitor engine parameters (engine speed;

engine oil pressure; engine coolant temperature; system voltage; machine hours).

Diagnostic module shall be housed inside a sealed enclosure with latching cover.

Cover shall be lockable for vandalism protection.

(f) Hydraulic gauges for systems pressure, pull-down pressure, and hold back pressure.

(g) Feed rate, feed pull-down and hold back pressure controls.

(h) Feed and detented feed levers.

(i) Hydraulic controls for all standard and provided optional components.

The drill controls shall be arranged in groups and situated for convenience according to frequency of use. For safety and convenience, the hydraulic levers shall have directional control that corresponds with cylinder movement. For example, moving the feed lever up shall extend the feed cylinders.

MEASUREMENT WHILE DRILLING (MWD): A Jean Lutz Dialog MX Drilling Parameters Recorder System shall be provided. The system shall include a data monitor, junction box with connecting cable to the data monitor, RPM sensor with cable and adjustable mount, water systems pressure sensor, water systems flow meter, drill frame vibration sensor with cable, depth sensor with cable, and data recording software. A wireless torque and crowd sensor shall be installed below the drill spindle and connected to the Jean Lutz system by wireless interface box. These items are to be installed and serviceable upon delivery of the finished track-mounted drill machine MWD systems.

Operational training is not to be included. The State will arrange for MWD systems training when and if needed.

SAFETY AND EMERGENCY SHUT-DOWN SYSTEM: Push-button emergency shut-off switches shall be located on the control panel and on the right side of the main drill frame.

Two emergency multi-directional wobble shut-off switches with extended levers shall be located near the bottom of and parallel to the feed cylinders. One emergency multi-directional wobble shut-off switch shall be located above and parallel to the axis of the cathead. When any emergency shut-off switch is activated, a driveline brake is engaged to stop the spindle rotation in less than one revolution, the clutch is released, the cathead rotation instantly stops, and the engine is shut down. The system shall also include a lock-out type clutch handle that positively locks the clutch handle in the down or disengaged position and a auxiliary spindle brake set valve. A neutral start switch is to be included that only allows the engine to start when the clutch is disengaged. A mast-raising alarm shall be included to alert the drill crew to look for overhead obstructions.

DOT-SS-27-9015-DG

Drill Rig Specifications

Florida DOT CME 55 Tier ads4f

MAST WITH QUICK DISCONNECT: The mast shall be an integral part of the upright drill frame with provision for being disconnected and connected without the use of bolts.

The mast shall completely disconnect from the drill frame so that the drill and the slide bases are operable when the mast is not needed. The mast when disconnected from the upright drill frame shall be stored on a suitable rack or off the unit. With the mast secured in its rack and the upright drill frame horizontal, the mast shall be separated from the drill by extending the in-out slide base, thereby disengaging cylindrical tapered pins on the mast from like tapered boxes fastened to the top part of the upright drill frame.

With the mast in a vertical position, the sheaves shall be not less than 26 feet from the base of the drill main frame. The maximum line pull of the draw works shall be evenly distributed on four cross-braced tubular members with an adequate margin of safety.

The mast shall be a tapered design with a depth at the base of at least 9 inches. Pairs of 8 inch diameter sheaves shall be aligned with the rope or wireline they carry. Two hydraulic cylinders shall be provided to raise and lower the upright drill frame and mast.

UNDERSIDE SHEAVE: A sheave shall be positioned near the top of the mast so that a hoist line can be aligned over the drill spindle.

DRAW WORKS: The draw works shall include a cathead, three hydraulic hoists, and a hydraulic wireline hoist.

The cathead shall be hydraulically powered and have a pulling capacity of not less than 1,370 pounds. The cathead shall be located at the right rear corner of the drill at right angles to the long axis of the drill frame. The diameter of the drum shall be 8 inches and the length 7.5 inches. Maximum peripheral speed shall not be less than 710 feet per minute.

The first hydraulic hoist shall have a maximum pulling capacity of not less than 8,500 pounds. Maximum line speed up shall be not less than 72 feet/minute and maximum line speed down shall be not less than 310 feet/minute. One hydraulic lever shall be furnished for controlling hoisting or lowering and rotation speed. A hydraulic brake release valve shall be furnished that permits wire rope to lead off the drum when the hoist control lever is positioned to suspend a load. The hoist shall include 1/2 inch diameter wire rope and a safety Shur-Lok hook.

The second hydraulic hoist shall have a maximum pulling capacity of not less than 3,200 pounds. Maximum line speed shall be not less than 100 feet per minute. One hydraulic lever shall be furnished for controlling hoisting or lowering and rotation speed. The hoist shall include 3/8 inch diameter wire rope and a safety Shur-Lok hook. A cable guide shall be provided.

DOT-SS-27-9015-DG

Drill Rig Specifications

Florida DOT CME 55 Tier ads4f

The third hydraulic hoist shall have a maximum pulling capacity of not less than 3,200 pounds. Maximum line speed shall be not less than 100 feet per minute. One hydraulic lever shall be furnished for controlling hoisting or lowering and rotation speed. The hoist shall include 3/8 inch diameter wire rope and a safety Shur-Lok hook. A cable guide shall be provided.

The hydraulic wireline hoist shall have a maximum pulling capacity of not less than 1800 pounds. Maximum line speed shall be not less than 200 feet per minute. One hydraulic lever shall be furnished for controlling hoisting or lowering and rotation speed. The hoist shall be capable of holding up to 900 feet of 3/16 inch diameter wireline cable. Cable shall not be included.

SLIDING BASE, IN-OUT: A sliding base shall be furnished for moving the drill in and out so that the drill spindle can be positioned to facilitate alignment of augers and drill rods and to provide clearance from the hole for handling augers, casing and other down-hole tools. With the slide base extended, the center of the drill spindle shall be at least 24 inches from the rear of the truck to provide ample working room. The in-out slide base shall have at least 18 inches of travel and shall be hydraulically operated. The in-out slide base shall have a replaceable nylatron (or approved equal) wear plate between the metal slide surfaces.

SLIDING BASE, SIDEWAYS: A sliding base shall be furnished for moving the drill to either side so that the drill spindle can be positioned to facilitate alignment of augers and drill rods when starting or drilling a hole. The sideways slide base shall have at least 16 inches of travel and shall be hydraulically operated. The sideways slide base shall have nylatron (or approved equal) wear plate between the metal slide surface.

FLUTED KELLY AND QUICK DISCONNECT CHUCK ASSEMBLY: A quick disconnect fluted kelly chuck shall be affixed to the bottom of the drill spindle. An auger drive universal joint with a heavy-duty hollow-stem auger pin up and 2 inch hexagon socket down shall fit an auger box on the bottom of the chuck. Attachment or detachment of the chuck or auger drive universal joint shall be made quickly and easily. The kelly shall not have to be removed when using the auger drive universal joint. Keys shall be provided in the chuck that will engage 180 degree opposed flutes that run the length of the kelly for transmission of rotation and torque. Retractable plungers shall be provided in the chuck that will engage opposed crosswise slots in the kelly for transfer of thrust and retraction. An alloy steel kelly shall be furnished that is 2-5/8 inch OD x 1-3/8 inch ID x 91 inches long with five slots spaced 15 inches apart. The kelly shall have an pin to pin saver sub on the bottom and a 1-1/2 inch ID left-hand box thread on top. A bail-type water swivel shall be furnished at the top of the kelly with stabilization to the drill pull-

DOT-SS-27-9015-DG

Drill Rig Specifications

Florida DOT CME 55 Tier ads4f down rods to the kelly can be rotated at maximum speed without vibration. It shall be possible to rotate the kelly with the plungers disengaged.

MUD PUMP ASSEMBLY: The mud or water pump shall be a progressive cavity type pump (Moyno 3L8 or equal) and shall have an infinitely adjustable output of 0 to 79 gallons per minute and a maximum pressure of 225 PSI. Pump output shall not be affected by changes in engine RPM. Power for the mud pump shall be supplied by a hydraulic motor operated from the drill hydraulic system. A three-speed forward, one-speed reverse transmission shall be provided between the hydraulic motor and water pump. The assembly shall include a pressure gauge, a 1-1/2 inch pressure port with sufficient 1-1/2 inch high pressure hose to connect to the control panel, service tee with 1 inch bypass at the operator’s panel and a 2 inch suction port with 2 inch suction hose to the water tank. A 2 inch by 25 foot long suction hose with foot valve and strainer and a cam type quick disconnect coupling on the water pump shall be provided. Provisions shall be made for drainage of the mud pump and lines.

WATER SWIVEL: A bail-type water swivel with left-hand connection shall be installed on top of the fluted kelly. A locking plate shall be included to stabilize the water swivel input plumbing during rotation.

STANDPIPE WITH HOSE TO CONTROL PANEL: A 1-1/2 inch diameter standpipe shall be mounted on the upright drill frame and connected by a 1-1/2 inch high pressure hose to the mud pump output at the control panel. High pressure hose shall connect the standpipe to the water swivel on the fluted kelly utilizing cam-type quick disconnect fittings with safety cables.

HYDRAULIC HAMMER: A hydraulic hammer system shall be furnished that will lift a 140 pound drive weight and completely release the weight for a 30 inch free fall. No rope or cable shall be attached to the weight that might impede free fall. The system shall have a minimum rate of at least 50 blows per minute. The hammer shall be preset at the factory for a consistent weight fall height through the use of adjustable priority hydraulic control valves. Once the valves are set, the fall height of the hammer weight shall not be affected by engine throttle adjustments. The fall height shall have a tolerance of plus or minus 1/2 inch. A method for visual verification of the fall height of the weight while the hammer is in operation shall be provided. The hammer shall be mounted on one single-acting hydraulic cylinder which is dedicated to the operation of the hammer device and shall be attached to the upright drill frame opposite of the control panel. The hammer device shall be hydraulically raised or lowered by this hydraulic cylinder through 72 inches of vertical travel. A 140 pound drive weight shall be furnished. A safety feature shall be furnished that will prevent the hammer from operating if the anvil is not in place. An anvil storage tube shall be located at the rear of the drill platform to hold the hammer anvil

DOT-SS-27-9015-DG

Drill Rig Specifications

Florida DOT CME 55 Tier ads4f when not in use.

DRILL REMOVAL FACILITIES: The drill base frame shall be equipped with lifting points to facilitate removal from the drill platform. Hydraulic lines to the deck bulkhead shall have quick disconnect couplings and color coded. The drill base frame shall have center of gravity markers for both mast on and mast off situations.

HYDRAULIC ROD HOLDER AND BREAKOUT DEVICE: A hydraulic rod holder having two opposed hydraulic cylinders that clamp up to 4.5 inch OD drill rod or pipe between two replaceable jaws shall be furnished. These jaws shall have a minimum of 3.75 inches of vertical height engagement of the drill rod. The device shall swing on and off the hole from a pivot point near the right rear leveling jack and shall hydraulically move in and out. The hydraulic extension or retraction of the rod holder shall permit centering of the rod holder jaws on tools that are aligned with the vertical axis of the drill spindle. The rod holder shall store flush with the rear of the platform and out of the way when drilling with auger tools. The rod holder shall be capable of pivoting away from the carrier so that the jaws are a minimum of 55 inches from the platform. A hydraulic breakout wrench shall be mounted on the rod holder. One set of drill rod jaws shall be furnished.

WATER TANK/TOOL BOX COMBINATION: A water tank/tool box combination shall be provided at the front of the platform behind the cab. The tool boxes each end are to be 18 deep with double swing-out doors and a removable center shelf. The center section (approximately 470 gallons) shall be used for water storage. The tank shall be all steel construction and shall have internal baffles. The tank shall include inlet and discharge ports, clean-out hatch, as well as plumbing to the mud pumps. A shut-off valve shall be installed at the tank suction plumbing with quick disconnect hose to the mud pump. A storage rack is to be provided below the water tank/tool box for storage of five foot lengths of drill rods.

A one inch drain line for the water tank shall be provided with shut-off valve on helper side of the drill platform.

HYDRAULIC LEVELING JACKS: Heavy-duty hydraulic leveling jacks shall be furnished that are individually operated from the control panel at the left rear of the drill. The jacks shall provide adequate leveling capability and shall be strong and rigid enough to easily support the total weight of the machine plus the loads generated when retracting drilling tools. Check valves shall be furnished in the hydraulic lines to prevent leakage or slippage of the jacks while the drill is set up on a site. The chrome-plated jack piston rods shall be completely enclosed to safeguard them from damage.

DOT-SS-27-9015-DG

Drill Rig Specifications

Florida DOT CME 55 Tier ads4f

Two jacks shall be mounted at the rear of the platform, one on each corner. The maximum cylinder travel shall not be less than 36 inches. The minimum outside diameter of the jack cylinders shall be 4.5 inches with a 4 inch bore and 2.5 inch diameter piston rod.

Two tool hooks shall be mounted on each rear jack housing. Hoist cable retainer arms with dividers shall be installed at each rear jack. These retainers shall pivot out for service and pivot in for transport.

Two jacks shall be mounted at the front of the platform behind the truck cab. The maximum cylinder travel shall not be less than 36 inches. The minimum outside diameter of the jack cylinders shall be 4.5 inches with a 4 inch bore and 2.5 inch diameter piston rod.

DRILL PLATFORM: The drill platform shall be constructed from structural steel members and 12 gauge safety tread deck plate. Drill rod and auger racks shall be furnished above the deck. Clearance lights shall be included. The platform width shall not exceed 96 inches. The platform shall be for a tandem axle truck.

A folding driller's step that slides from a horizontal storage position beneath the left rear corner of the platform shall be supplied.

An aluminum folding ladder shall be provided for easy access to the drill deck.

A hydraulic underbody auger rack shall be furnished on both sides of the truck ahead of the rear wheels to facilitate the handling of augers. The racks shall be controlled by a hydraulic levers and shall slide on ball-bearing rollers.

The drill platform shall be undercoated.

Dual pipe vises with a 1-5/8 inch hex shank attached shall be provided to fit two hex sockets located on both sides of the drill platform.

AIR COMPRESSOR: A drill engine driven utility air compressor mounted on the side of the engine shall be provided. The compressor shall develop 15.2 CFM maximum at 125 PSI maximum. The system shall include three 3 gallon reserve tanks, plumbing to the rear of platform, regulator, 12 foot air line with quick disconnects, impact wrench with pigtail hose, 1.125 inch, and 1.25 inch impact sockets.

IDENTIFICATION: CME-55 or approved equal.

COLOR: The drill unit and all parts normally painted shall be primed and painted a color complying with specifications. A color sample shall be furnished to the successful bidder.

DOT-SS-27-9015-DG

Drill Rig Specifications

Florida DOT CME 55 Tier ads4f

All exposed hydraulic cylinder piston rods shall be covered to prevent over spray during painting.

MISCELLANEOUS: All equipment cataloged as standard shall be furnished and shall be included in the purchase price of the unit. The component parts of the unit shall be of proper size and design to safely withstand maximum stresses imposed by a capacity load, and the manufacturer's rated loads for chains, bearings and universal joints shall not be exceeded when the unit is loaded with such loads.

The torque capacity of each driven part shall be equal to or exceed the torque capacity of its driving member.

This machine is to be delivered in first-class operating condition with acceptance subject to inspection and approval. The successful bidder, at a time designated, shall provide two days of training to familiarize personnel with the correct operation and servicing procedures for the equipment delivered.

No deviations from the specifications will be accepted.

All items which require periodic lubrication shall be provided with a suitable lubrication fitting.

Two copies—one hard copy and one electronic—of the manufacturer's service manual containing operating instructions, maintenance instructions and a bill of material or parts list shall be furnished by the manufacturer.

All pressure systems shall be provided with suitable pressure relief valves. With the exception of the drill rotary box, cathead, spindle and drilling tools, all moving parts which are so located as to be a hazard to operating or maintenance personnel shall be fully enclosed or properly guarded. Protective devices shall not impair the operating functions.

The equipment to be furnished under these specifications shall be warranted against defective design, materials and workmanship as standard with the manufacturer.

TRUCK: FREIGHTLINER Truck, Model 108SD (6 x 4) 204" WB, 138" CA, 54,600 pound GVW, including the following:

Cab painted WHITE 14,700 pound front axle 14,600 pound front springs 40,000 pound MT-40-14x rear axle tandem (5.29 ratio)

DOT-SS-27-9015-DG

Drill Rig Specifications

Florida DOT CME 55 Tier ads4f

75MPH speed limit Driver controlled differential locks, both rear axles 40,000 pound Hendrickson RT403 rear suspension Cummins L9 350 HP Allison 3000 automatic 12R22.5H (16 PR) steel radial tires, front Disc wheels, 22.5 x 9.00 front, 10 hole 295/75R22.5G (14 PR) steel radial tires Disc wheels, 22.5 x 8.25 rear, 10 hole Traction rear tread Air brake system with ABS, Dust shields Cummins exhaust brake Horizontal exhaust

18.7 CFM compressor

Heated air dryer 2 - 1000 CCA batteries, mounted LH under cab 160 amp alternator Engine block heater 2 - 50 gallon fuel tanks 6 gallon DEF tank, LH side

26.5 SM reinforced frame, 120,000 psi

Front frame extension Clear frame rails Tilt hood and fenders Air conditioning with tinted glass AM-FM-World tuner radio 7" screen Air suspension driver and passenger seats Emergency triangles and fire extinguisher 5 minute idle shut-down timer and label Cruise control Tilt steering, heated mirrors Back up alarm Back-up camera

DOT-SS-27-9015-DG

Drill Rig Specifications

Florida DOT CME 55 Tier ads4f

Certificate Of Completion Envelope Id: 8FFFDA88-6F67-894A-800E-9AB141F0441B Status: Completed

Subject: Complete with Docusign: PUR7776 Draft.pdf

Contract Number (ex. C9A12, optional): DOTT-SS-27-9015-DG

Document Contains Confidential Information?: No

Fin Proj Num (ex.123456-1-32-01, Optional):

Office (contact Procurement if add is needed):

Materials Office

HR Action?: No

Source Envelope:

Document Pages: 13 Signatures: 2 Envelope Originator:

Certificate Pages: 2 Initials: 0 Destyne Grayson

AutoNav: Enabled

EnvelopeId Stamping: Enabled

Time Zone: (UTC-05:00) Eastern Time (US & Canada)

605 Suwannee Street

MS 20

Tallahassee, FL 32399-0450 destyne.grayson@dot.state.fl.us

IP Address: 156.75.197.131

Record Tracking Status: Original

8/26/2026 4:18:34 PM

Holder: Destyne Grayson destyne.grayson@dot.state.fl.us

Location: DocuSign

Signer Events Signature Timestamp Paul Baker paul.baker@dot.state.fl.us

State Purchasing Administrator

Florida Department of Transportation

Security Level: Email, Account Authentication (None), Login with SSO

Signature Adoption: Pre-selected Style

Using IP Address: 156.75.197.229

Sent: 8/26/2026 4:21:29 PM

Resent: 8/27/2026 11:56:11 AM

Viewed: 8/27/2026 2:18:08 PM

Signed: 8/27/2026 2:18:19 PM

Electronic Record and Signature Disclosure:

Not Offered via Docusign

Anthony Pinzino

Anthony.Pinzino@dot.state.fl.us

Assistant General Counsel

Signing Group: CO Legal Signing Group

Security Level: Email, Account Authentication (None)

Signature Adoption: Pre-selected Style

Using IP Address: 156.75.114.85

Sent: 8/27/2026 2:18:21 PM

Viewed: 8/27/2026 3:04:45 PM

Signed: 8/27/2026 3:05:03 PM

Electronic Record and Signature Disclosure:

Not Offered via Docusign

Destyne Grayson destyne.grayson@dot.state.fl.us

Florida Department of Transportation

Security Level: Email, Account Authentication (None)

Completed

Using IP Address: 156.75.197.131

Sent: 8/27/2026 3:05:05 PM

Viewed: 8/27/2026 4:14:41 PM

Signed: 8/27/2026 4:15:57 PM

Electronic Record and Signature Disclosure:

Not Offered via Docusign

In Person Signer Events Signature Timestamp

Editor Delivery Events Status Timestamp

Agent Delivery Events Status Timestamp

Intermediary Delivery Events Status Timestamp

Certified Delivery Events Status Timestamp

Carbon Copy Events Status Timestamp

Witness Events Signature Timestamp

Notary Events Signature Timestamp

Envelope Summary Events Status Timestamps Envelope Sent Hashed/Encrypted 8/26/2026 4:21:29 PM

Certified Delivered Security Checked 8/27/2026 4:14:41 PM

Signing Complete Security Checked 8/27/2026 4:15:57 PM

Completed Security Checked 8/27/2026 4:15:57 PM

Payment Events Status Timestamps