Puncheon Board Dimensions Final.pdf
PDF 779 KB Posted
- Attached to
- Thayer Lake Trail - Tongass National Forest
- Solicitation number
- 1240BF21Q0070
- Issued by
-
Department of Agriculture Forest Service
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Puncheon Board Dimensions
Needed: 1.5~2 miles of linear trail boards
Yellow or Red Cedar
Dimensions 3 inch depth by 12 inch width by 24 inch length which equals 6 board feet per unit.
7,920 to 10,560 linear (trail) feet = 23,760 to 31,680 board feet
3 inches in depth
12 inches width
24 inches length
In bundles of four for ease hauling into job site via pack boards.
The tops sides in this photo have been milled with grooves vs. the previous material purchased which was rough split on the top giving more traction and meeting historical standards.
Either method is fine.
The following are pictures of the boards previously purchased and after they were installed. Notice the width
(12”) is actually the distance each board covers of linear trail and the length(24”) is the width of our trail tread. Therefore, it is important that the rough top side runs parallel along the
24” dimension(perpendicular to the trail).
File details come from the government source that posted it. Updated .