PRS W911RX25DA004pdf.pdf
PDF 436 KB Posted
- Attached to
- Wheeled Fire Extinguisher Maintenance - On Installation Federal contract opportunity
- Solicitation number
- W911RX25DA004
About this file
This Performance Work Statement (PWS) details fire extinguisher maintenance services for the 418th Combat Sustainment Brigade, with a focus on comprehensive fire safety equipment servicing. The contractor is required to provide 100% compliant services including inspection, hydrostatic testing, recharging, certification, and demilitarization of fire extinguishers, adhering to National Fire Protection Association (NFPA) standards and applicable Army regulations. Key performance requirements include affixing inspection labels to each fire extinguisher upon service completion, maintaining detailed documentation of services performed, and submitting all inspection labels to the MAAF Fire Marshal.
The PWS outlines four primary performance requirement summaries (PRS): fire extinguisher services, compliance with hydrostatic testing and inspection regulations, documentation of inspection details, and demilitarization of fire extinguishers. Each requirement mandates 100% compliance, with contractor performance to be documented in the Contractor Performance Assessment Reporting System (CPAR). The deliverables schedule specifies that inspection labels must be affixed to each fire extinguisher upon completion of service and submitted to the MAAF Fire Marshal.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Geary County WD - July 24 2025.pdf | ||
| PWS - W911RX25DA004.docx | DOCX document | |
| Contract - W911RX25DA004 - PII Protected_Redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PERFORMANCE WORK STATEMENT (PWS) [418th CSB TEMPLATE] Version 1 August 2021
418th CSB Vs 1 202108
ATTACHMENT 1
Performance Requirements Summary The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The standard should relate to timeliness, quality, or quantity (metrics) of service required by the Contractor is stated in the PWS verbiage. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success.
Performance Objective
(The Service required— usually a shall statement)
Standard Performance Threshold (This is the maximum error rate. It could possibly be “Zero deviation from standard”)
Incentive (Positive and/or
Negative)
1. Combating Trafficking in Persons FAR 52.222-50 c
The Contractor shall Notify its employees of
a. The United States Government's zero tolerance policy described in paragraph
(b) of this clause
The actions that will be taken against employees for violations of this policy. Such actions may include, but are not limited to, removal from the contract, reduction in benefits, or termination of employment.
100% Compliance Contractor compliance rate shall be utilized as objective evidence of contract compliance and documented into the CPAR system;
contractor shall re-perform the service
2. Service Contract Reporting PWS para. XXXX and
CLIN XXXX
The Contractor shall completely fill in all the information in the format at the following web address http://sam.gov . The contractor shall provide the estimated total cost (if any) incurred to comply with this reporting requirement. Reporting period shall be the period of performance not to exceed 12 months ending September 30 of each government fiscal year and must be reported by 31 October of each calendar year. If contract period of performance ends prior to September 30, the contractor has 30 day from end date of the contract to complete the SCR requirement. (as applicable)
100% Compliance Contractor compliance rate shall be utilized as objective evidence of contract compliance and documented into the CPAR system;
contractor shall re-perform the service
PRS # 1.
a. (Para) b.(Narrative) The contractor shall provide fire extinguisher services.
The Contractor shall inspect, service, hydrostatic test, recharge and certify fire extinguishers. Services will include the six-year service and DEMIL as directed to ensure fire extinguishers meet standards in section 10 of the National Fire Protection Association (NFPA) and applicable Army regulations.
The Contractor shall provide
100% Compliance
Contractor compliance rate shall be utilized as objective evidence of contract compliance and documented into the CPAR system;
contractor shall re-perform the service.
August 2021 inspection labels affixed to each fire extinguisher upon completion of service.
PRS #2
Hydrostatic Testing and Inspection Regulations
PWS
Contractor shall comply to standards and regulations referenced in this PWS.
100% Compliance Contractor shall be utilized as objective evidence of contract compliance and documented into the CPAR system;
contractor shall
PRS #3
Inspection Labels PWS
Contractor shall supply inspection documentation as required. Inspection documentation will contain, at a minimum, month, year, service conducted, and pressure at which the test was perform (for hydrostatic testing only).
shall be utilized as objective evidence of contract compliance and documented into the CPAR system;
contractor shall
PRS #4
DEMIL fire extinguishers
DEMIL fire extinguishers as directed.
shall be utilized as objective evidence of contract compliance and documented into the CPAR system;
contractor shall
August 2021
ATTACHMENT 2
Deliverables Schedule
Deliverable Frequency # of Copies Medium/Format Submit To
Inspection Labels stated in the PWS
Upon completion of each fire extinguisher service
1 per Fire Extinguisher
Affixed onto fire extinguisher
MAAF Fire Marshal
August 2021
File details come from the government source that posted it. Updated .