Product Description Skid Steer Loader.pdf

Skid-Steer Loader 3400 lbs. Rated Operating Capacity

SKID-STEER LOADER

Vertical Lift Arm Path

3400 lbs.

RATED OPERATING CAPACITY

EFFECTIVE AUGUST 1, 2022

For the most up-to-date Bid Specs go to BobcatNET >>Skid-Steer Loaders>>S86>Bid Specs

These bid specifications are to be used as guidelines when assisting purchasing agents and governmental specification writers in writing specifications for loaders. It is not the intent of these specifications to cover all details of design or construction. The unit shall be fully equipped to perform the work intended and shall be a new, current production model.

For individual assistance in preparing detailed specifications, contact the Product Management Group in West Fargo, ND office at 701-241-8700.

*SPECIFICATION(S) ARE BASED ON ENGINEERING CALCULATIONS AND ARE NOT ACTUAL MEASUREMENTS. SPECIFICATION(S) ARE PROVIDED FOR COMPARISON PURPOSES ONLY AND ARE SUBJECT TO CHANGE WITHOUT NOTICE. SPECIFICATION(S) FOR YOUR INDIVIDUAL BOBCAT EQUIPMENT WILL VARY BASED ON NORMAL VARIATIONS IN DESIGN, MANUFACTURING, OPERATING CONDITIONS, AND OTHER FACTORS.

DIMENSIONAL SPECIFICATIONS

Angle of Departure ............................................................................................................................ 26° Dump Angle @ Maximum Height ....................................................................................................... 40° Dump Height with Standard Bucket ............................................................................ 101.8" (2586 mm) Reach @ Maximum Height ............................................................................................. 38.0" (964 mm) Ground Clearance ............................................................................................................ 8.8" (224 mm) Height to Hinge Pin ..................................................................................................... 132.0" (3353 mm) Cab Height ................................................................................................................... 83.1" (2111 mm) Length without Attachment ......................................................................................... 120.4" (3059 mm) Length with Standard Bucket ...................................................................................... 153.5" (3900 mm) Overall Operating Height ............................................................................................ 171.1" (4345 mm) Carry Position ................................................................................................................... 9.5" (242 mm) Rollback Angle @ Carry Position ....................................................................................................... 31° Turning Radius with Standard Bucket ........................................................................... 90.5" (2300 mm) Wheelbase ................................................................................................................... 51.3" (1304 mm) Overall Width with 12-16.5, 12 PR, Heavy/Severe Duty Tires ....................................... 72.0" (1829 mm) Bucket Width ................................................................................................................ 74.0" (1880 mm) Overall Width with 12-16.5, 12 PR, Heavy Duty Tires Offset Rims ............................... 69.0" (1752 mm) Bucket Width ................................................................................................................ 74.0" (1880 mm)

PERFORMANCE

*Rated Operating Capacity ....................................................................................... 3400 lbs. (1542 kg) *Rated Operating Capacity with Counterweight Option

With 200 lb. Weight Kit ...................................................................... 3550 lbs. (1610 kg) With 300 lb. Weight Kit ...................................................................... 3625 lbs. (1644 kg) With 400 lb. Weight Kit ...................................................................... 3700 lbs. (1678 kg)

*Tipping Load ........................................................................................................... 6800 lbs. (3084 kg) Operating Weight (ISO 6016) ................................................................................... 9728 lbs. (4412 kg) Travel Speed

Low Range ..................................................................................... 6.9 mph (11.1 km/hr) High Range .................................................................................. 12.3 mph (19.8 km/hr)

Lift Breakout Force ................................................................................................... 7388 lbs. (3351 kg) Tilt Breakout Force ................................................................................................... 7580 lbs. (3438 kg) **Push Force ............................................................................................................ 8270 lbs. (3751 kg) ***ROPS Operator Noise Level ***ROPS Bystander Noise Level ***Enclosed Cab Operator Noise Level .......................................................................................... 78 dB ***Enclosed Cab Bystander Noise Level ................................................................................103 dB

*Rated Operating Capacity (ROC) @ 50% of Tipping Load complies with ISO 14397-1 and SAE J818 for wheel loaders **Theoretical – calculated using a coefficient of friction of 0.85 (0.85 x Operating Weight) ***Sound values tested per ISO 6395 (Bystander) and ISO 6396 (Operator). Enclosed Cab values are based on comfort package selection, not a la carte enclosed cab.

ENGINE/ELECTRICAL

- Loader shall have a 4-cylinder, liquid-cooled diesel;105.0 hp (78.3 kW) at 2600 governed RPM.

- Loader engine shall have a minimum torque of 300.2 lbf-ft (407 N-m) at 1600 RPM.

- Engine displacement shall be no more than 208 in.3 (3.41 L)

- Loader engine shall be turbo charged.

- Loader shall be equipped with a hydraulically driven, variable speed cooling fan.

- Loader shall have a reversing cooling fan option. Reversing fan shall include three modes:

- Off

- Manual Operation: Operator can momentarily reverse fan direction as desired

- Automatic Operation: Loader will reverse the fan automatically based on fluid temperatures

- Engine shall meet Tier 4 compliance without the aid of a diesel particulate filter (DPF).

- Spark arrestor device shall be a certified USDA Spark Arrestor.

- Cold weather assist shall be automatically activated based on coolant temperature.

- Air cleaner shall be a dual element type with dry element primary and safety filter.

- Loader shall limit engine RPM until specified engine operating temperature is attained to protect engine from premature wear due to cold temperatures.

- Engine coolant shall include propylene glycol anti-freeze with freeze protection to -34ºF (-37ºC).

- Loader shall be equipped with a Diesel Oxidation Catalyst (DOC).

- Loader shall be equipped with a Selective Catalytic Reduction (SCR) system.

- Loader shall require Diesel Exhaust Fluid (DEF).

- Loader shall indicate when the SCR is in DeSox.

- An SCR DeSox Inhibit Switch shall be available.

- Loader shall be equipped with an Engine Control Unit to electronically monitor and control the performance of the engine.

- Loader shall be equipped with a Dosing Control Unit to electronically monitor and control the performance of the

SCR system.

- The loader’s fuel injection system shall include a High-Pressure Common Rail (HPCR).

- Fuel filter is rated as 2-micron C at 98.7% efficiency but meets or exceeds 4-micron C rating at 99.6% efficiency.

- Loader shall be equipped with a dual path cooling system which brings fresh air from behind the machine for engine and hydraulic system cooling. While at the same time removing hot air from the engine and hydrostatic area.

- Battery shall be a 12 volt with a minimum of 1000 cold-cranking amps.

- Alternator shall be a minimum 120 amp.

- Starter shall be a 12 volt; 3.62 hp (2.7 kW), gear type.

- Engine accessory belt shall not require any adjustments.

- Engine de-rating shall be provided as standard equipment and shall monitor engine coolant temperature, engine oil pressure and engine RPM to help prevent engine damage.

- Engine block heater shall be provided as optional equipment to provide easier starting during cold weather operation.

DRIVE SYSTEM

- Shall have a fully hydrostatic four-wheel drive.

- Transmission shall be infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic drive motors.

- Hydrostatic piston pumps shall be driven direct from the engine.

- Final drive chains shall be pre-stressed #120 HSOC endless roller chain (no master link).

- Two chains per each side of the loader with no idler sprocket.

- Chains shall not require adjustments.

- Axle tubes (housings) shall be welded, not bolted, to transmission to prevent chain slack.

- All chains shall be enclosed in dual housings mounted in the sides of the mainframe.

- Final drive chains and sprockets shall be sealed in a chaincase with oil lubrication.

- Shall have a minimum weight distribution of 71% on the rear axles to provide efficient operation.

- Axle seals shall be protected by the wheel hub and shall never require greasing.

- Final drive axles shall be a minimum of 2.7" (68.6mm) in diameter.

- Parking brake shall be a positive engagement wedge and lobe for standard single speed and optional Two-

Speed.

- Wheels shall be fixed to the axle hubs with eight (8) 16 mm wheel bolts.

- Tires: 12-16.5, 12 PR, Heavy Duty Tires 12-16.5, 12 PR, Heavy Duty Tires Offset Rims 12-16.5, 12 PR, Severe Duty Tires

HYDRAULIC SYSTEM

- Pump type shall be a gear type pump for standard flow hydraulics.

- Pump type shall be an electronically controlled, variable displacement pump for loaders equipped with optional high or super flow hydraulics

- Hydraulic pump capacity for standard flow shall be capable of providing 23.6 gpm (89.3 L/min) for bucket, lift arm and attachment operation.

- Hydraulic pump capacity for high flow shall be capable of providing 36.6 gpm (138.5 L/min) for high flow hydraulic attachment operation.

- Hydraulic pump capacity for super flow shall be capable of providing 42.0 gpm (159.0 L/min) for super flow hydraulic attachment operation.

- System pressure at the quick couplers shall be 3500 psi (24.1 MPa) for standard flow.

- System pressure at the quick couplers shall be 3500 psi (24.1 MPa) for high flow.

- System pressure at the quick couplers shall be 4061 psi (28 MPa) for super flow.

- Variable flow auxiliary hydraulics shall be standard equipment.

- Shall include flush-face pressure release quick couplers.

- Shall include dual direction detent.

- Control valve shall be three spool, open center, series type.

- Lift spool shall include a detent position for lift arm float function.

- Front auxiliary hydraulic spool shall include a detent function in both forward and reverse directions.

- Valve shall allow tilt to function when auxiliary hydraulics are at relief.

- Cylinders shall be a double-acting type.

- Dual tilt cylinders shall have a cushioning feature on dump and roll back.

- Dual lift cylinders shall have a cushioning feature on lift arm down.

- Hydraulic system de-rating shall be provided as standard equipment and shall monitor hydraulic oil temperature and hydrostatic charge pressure.

- A hydraulic oil cooler shall be standard equipment.

- Hydraulic filter shall be an element style design.

- Hydraulic oil level sight gauge shall be easily visible from the loader outside.

- Auxiliary hydraulic hoses shall be routed inside the lift arm.

- Auxiliary quick coupler block shall be integrated into the lift arm front and must be protected with steel guarding.

- Shall have 3-coupler block as standard equipment and include

- ½” quick couplers

- Shall have 5-coupler block as an option and include

- ½” quick couplers

- ¾” quick couplers

- A feature for relieving pressure from the auxiliary hydraulics circuit shall be provided by pressing in and holding the quick couplers.

- Shall have rear auxiliary hydraulics as an option and include

- Electric finger controls on left joystick.

- Dual-Direction bucket positioning shall be available as an option.

- Shall include on/off button inside operator cab.

- Automatic Ride control shall be available as an option.

- Shall be automatically activated and deactivated based on the lift cylinder hydraulic pressure

- Shall include on/off button inside operator cab.

- Lift circuit port relief valve shall be standard equipment.

- Auxiliary hydraulics circuit port relief valve shall be available as an option.

- Shall have inertia welded rods and bases at the ends of the cylinders.

- Cylinders shall meet the following minimum specifications:

Function # of Cylinders Bore Diameter Rod Diameter Stroke Lift 2 3.00" (76.2 mm) 1.75" (44.5 mm) 28.03" (712.0 mm) Tilt 2 3.25" (82.6 mm) 1.75" (44.5 mm) 14.82" (376.4 mm)

OPERATOR CONTROLS

- Loader direction, steering, and travel speed.

- Standard - Shall be controlled by two independent steering levers.

- Optional - Shall be controlled by SJC system.

- Loader lift and tilt functions.

- Standard- Shall be controlled by separate adjustable foot pedals.

- Optional- Shall be controlled by SJC system.

- Optional Selectable Joystick Control (SJC) system shall be available to allow operator to switch between ISO control pattern (loader direction, steering and travel speed on left hand joystick; loader lift and tilt functions on right hand joystick) or H-Pattern (left hand joystick controls lift function and left side drive function; right hand joystick controls tilt function and right side drive function).

- Speed Management shall be available on SJC equipped loaders to allow the loader to be maneuvered at a slower travel speed, even during maximum movement of the joysticks.

- Drive Response modes shall be available on SJC equipped loaders to change how responsive the loader’s drive and steering systems are when the operator moves the joysticks.

- Steering Drift Compensation shall be available on SJC equipped loaders to compensate for normal variations such as tire inflation pressure and wear, driving on uneven terrain such as crowned road surfaces and when using side shift attachments such as trenchers.

- Horsepower Management shall be available on SJC equipped loaders to allow the engine to operate at maximum horsepower and torque.

- Auto Idle shall be standard on SJC equipped loaders to automatically reduce the engine speed to idle after a set time interval of loader drive and/or hydraulic inactivity.

- Auto Idle shall be turned on or off using the instrumentation display.

- The time interval before the engine speed reduces to idle shall be adjustable from 4 to 250 seconds on loaders equipped with deluxe loader instrumentation.

- Lift and tilt compensation shall be available to compensate for normal variations in the loader main control valve.

- Workgroup Response modes shall be available to change how responsive the loader’s lift and tilt functions are when the operator moves the foot pedals or joysticks.

- An optional Radio Remote Control kit shall be available for SJC equipped loaders. The kit shall allow the operator to safely start the loader engine and operate the drive, lift, tilt and auxiliary hydraulic functions of the loader using a Radio Remote Control Transmitter.

- Bobcat MaxControl Kit shall be available for all SJC equipped loaders. The kit shall allow the operator to safely start the loader engine and operate the drive, lift, tilt, and auxiliary hydraulic functions of the loader using the Bobcat MaxControl App available on compatible mobile devices.

- Standard front auxiliary hydraulics shall be controlled by electrical switches located on the right steering lever handle or right-hand joystick.

- Optional rear auxiliary hydraulics controlled by electrical switches located on the left steering lever handle or left-hand joystick.

- Electrical switches on the steering levers or joystick handles shall activate turn signals, all attachment control functions, continuous flow control for auxiliary hydraulics, front horn and two-speed control.

- Engine speed shall be controlled by a rotary knob mounted on right hand cab post.

- Engine speed can be controlled by a foot pedal with optional Selectable Joystick Controls.

- Parking brake shall be controlled by a finger operated button on right hand cab post.

- Engine starting and shutdown functions shall be controlled electrically with a button or optional key switch start.

OPERATOR COMFORT

- An enclosed cab shall be available as an option.

- Air conditioning shall be available as an option without changing loader profile.

- Shall have the capability to be used in colder temperatures to aid in defrosting.

- Cab heat shall be available as an option without changing loader profile.

- Heater system shall have a minimum BTU output of 36,800 BTU.

- Front door shall be a one-piece curved design that opens to the side opposite of the auxiliary quick couplers.

- Cab door shall have a sensor that deactivates the lift and tilt valves when the door is open.

- Enclosed cab shall be pressurized to 0.2 inches of water.

- A rearview camera shall be available as standard equipment.

- HEPA filter shall be available as an option.

- A suspension seat shall be available as standard equipment.

- An adjustable seat shall be available as standard equipment.

- An air ride seat shall be available as an option.

- Adjustable arm rests shall be standard equipment.

- Cup holder shall be standard equipment.

- Engine throttle shall be located in front of the operator.

- The optional selectable joystick control system shall be mounted to the seat and shall be able to adjust independently of the seat.

- Sound reduction kits shall be available as an option.

- Reduces bystander noise to 103 dB (ISO 6395), and operator noise to 78 dB (ISO 6396)

- Top and rear windows shall be available as standard equipment.

- Front window wiper shall be standard equipment on machines with enclosed cab.

- Rear window wiper shall be available as an option on machines with enclosed cab.

- Intermittent front wiper shall be available as an option on machines with enclosed cab.

- Special application polycarbonate doors and windows shall be available as an option.

- A ¾” polycarbonate front door shall be available as an option for land clearing applications.

- Dome lights shall be available as an option.

- Front and rear operating lights shall be available as standard equipment.

- Front operating lights shall be LED with a minimum output of 2000 lumens.

- Side light kit shall be available as an option.

- Side light kit shall include 2 LED light bars with a minimum output of 1000 lumens per side.

- Side windows shall be mounted on the outside of the cab with the ability to be locked in open and/or closed positions.

- Side, rear and front window defrost shall be provided in the heat or air-conditioned options.

- Loader controls and buttons shall be mounted in front of the operator.

- An FM/AM Radio shall be available as an option.

- Radio shall be located to the left and above the operator.

- 12-volt power ports shall be available as an option.

- Clean out holes in the foot well shall be provided as standard equipment

- Shall meet ISO 5006:2006: Earth-moving Machinery. Operator’s Field of View. Test Method and

Performance Criteria without aides such as rear-view mirrors.

CAPACITIES

- Fuel Tank shall have a minimum capacity of 31.6 gal. (119.6 L).

- Diesel Exhaust Fluid (DEF) Tank shall have a minimum capacity of 5.4 gal. (20.4 L).

- Cooling System without heater shall have a minimum capacity of 4.4 gal. (16.5 L).

- Cooling System with heater shall have a minimum capacity of 4.5 gal. (17.1 L).

- Hydraulic & Hydrostatic Reservoir shall have a minimum capacity of 6.25 gal. (23.7 L).

- Hydraulic & Hydrostatic System shall have a minimum capacity of 16.5 gal. (62.5 L).

STANDARD INSTRUMENTATION WITH 5” DISPLAY

- The loader conditions shall be monitored by a combination of gauges and warning lights in the operator's line of sight that monitor the following functions. The system shall alert the operator of monitored loader malfunctions by way of an audible alarm and visual warning lights.

Features Warning Lights Indicators Data Display System

- English/Metric Settings - Engine Coolant Temp - 3-Point Shoulder Belt - Battery Voltage

- Keyless Start - Engine Malfunction - Coolant Temp - Drive Response Setting

- Maintenance Notification - Fuel Level - Engine RPM - Workgroup Response Setting

- Password Lockout - General Warning - Hydraulic Oil Temp - Engine Coolant Temp

- Service Codes with Basic _Description

- Hydraulic Malfunction - Hydrostatic Charge _Pressure

- Engine Preheat

- Engine RPM

- Lift & Tilt Valve - Fuel Level

- Oil Pressure - Hourmeter

- Parking Brake - Maintenance Clock

- Seat Bar - Rearview Camera

- Seat Belt - Service Codes

- System Voltage - Speed Management

- Turn Signals - Steering Drift

- DEF Level - Two Speed

STANDARD INSTRUMENTATION WITH OPTIONAL 7” TOUCH DISPLAY

- The following features of the 7” Touch Display are in addition to the 5” Display:

Additional Displays for: Additional Features:

- Multi-Language Display - Bluetooth Connectivity

- Attachment Control - Decelerator Setup

- High Flow Lockout

- Super Flow Lockout - Diagnostic Capability

- Two-Speed Lockout - Digital Clock

- Hands Free Communication

- Help Screens

- Integrated AM/FM Weather Band Radio

- Job Clock

- Rearview Camera Ready

- Security Code Time Out Settings

- Service Codes with Extended Descriptions

- USB Charge Port

ATTACHMENTS

- All attachments shall be mounted on a quick-change mechanism. No attachments will be considered unless it can be removed or mounted by an experienced operator in two minutes or less.

- The quick-change mechanism will incorporate two handles that drive spring loaded, wear compensating wedges into the attachment ensuring a tight attachment fit-up.

- A power quick-change mechanism shall be driven by hydraulics and shall be available as an option.

- The power quick-change mechanism shall be activated by a simple push button to raise and a second push button to lower attachment levers.

- A remote attachment control device shall be available for specified attachments to start the loader and operate the attachment from outside the operator control area.

- A single control unit (Attachment Control Kit – ACD) which will control all available attachments shall be available as an option.

- Attachment Control unit shall not use mechanical relays.

- Standard flow hydraulics shall be equipped as standard equipment.

- High flow hydraulics shall be available as optional equipment.

- Super flow hydraulics shall be available as optional equipment.

- No attachments will require more than three hydraulic hoses and one electrical line for operation.

SERVICEABILITY

- Engine shall be mounted inline to provide easy access to daily maintenance items.

- Access shall be available to the following through the rear door/tailgate and rear screen.

- Air cleaner

- Air conditioning compressor

- Alternator

- Cooling system (engine coolant and hydraulic oil coolers) for cleaning

- Engine oil and fuel filters

- Engine oil dipstick

- Starter

- DOC/SCR catalyst housing

- Easy access to engine oil drain shall be provided via access plate below engine.

- Easy access shall be available to all lift arm grease points.

- Axle hubs shall provide protection for the axle seals.

- Easy access shall be provided to all lift arm grease points.

- Quick-Tach pivots shall have replaceable wear bushings.

- Rod end of the tilt cylinder shall have a replaceable bushing.

- Tailgate shall have an optional lock for vandal proofing.

- Tailgate shall be equipped with doorstop to hold door open while servicing.

- A rear bumper shall extend beyond the tailgate to protect the tailgate from damage.

- Tip-up operator cab shall give access to certain hydraulic system components.

- Tip-up coolers shall give access to certain engine components.

SAFETY EQUIPMENT

- An enclosable operator cab with side screens shall be provided as standard equipment. Cab shall meet

SAE standards J1040 and J1043 for Rollover Protective Structure and Falling Object Protective Structure.

Minimum inside cab width of 35.1" (892 mm).

- A seat belt and button operated parking brake shall be furnished as standard equipment.

- A 3-point seat belt shall be available as standard equipment.

- Additional operator protection shall be provided by a seat bar or similar device which restricts lift arm operation when not in use.

- A lift arm support device shall assist in servicing the loader and be provided as standard equipment.

- Grab handles to assist the operator in mounting and dismounting the loader will be provided as standard equipment.

- Emergency exit provided through front door accessed via orange-colored handles or back window accessed via orange tag.

- Loader shall be equipped with an interlock control system which requires that the operator be seated in the loader with the seat bar down in place and the engine running before the hydraulic lift, tilt and the traction drive system can be operated. The auxiliary hydraulics shall deactivate when the operator raises the seat bar.

- Loader shall be equipped with a lift arm by-pass valve. Should the engine not start, or a system problem occur with the lift arms raised, the lift arms can be lowered by turning the lift arm by-pass control knob clockwise ¼ turn. Then, pull up and hold until the lift arms slowly lower.

- Shall have operational instructions and warnings by decals with pictorials and international symbols plus some messages in four basic languages: English, French, German and Spanish.

- Shall have a weather resistant operator handbook written in English attached to the loader.

- Loader shall include an alarm package including a horn and backup alarm.

- Rear operating lights shall be mounted to the tailgate and shall be recessed to minimize damage.

- Rear operating lights shall include backup lights and red colored taillights.

- Strobe lights or rotating beacons shall be available as an option.

- 4-way flashing lights shall be available as an option.

- Turn signals shall be available as an option.

- FOPS Level II shall be available as an option.

- Fire extinguisher shall be available as an option.

- Shall have single- or four-point lift kits available as an option for lifting the loader without affecting rollover and falling object protection features of the operator cab.

TRAINING RESOURCES

- A comprehensive Online Skid-Steer Loader Operator Training Course (English & Spanish).

- A comprehensive Compact Skid-Steer Loader Operator Training Course Kit shall be available. The kit shall include a video, classroom and hands-on training. This kit shall also be available in Spanish.

- A comprehensive Service Safety Training Course Kit shall be available. The kit shall include a video, classroom and hands-on training.