Product Description_MRC Platoon Cage Steel Door Fabrication and Install.docx
DOCX document 292 KB Posted
- Solicitation number
- W911YN26QA017
About this file
This is a Product Description and Technical Specification document for a solicitation (W911YN26QA017) issued by the Department of the Army Florida Army National Guard for the Miramar Retention Center. The procurement requires vendors to provide fabrication and installation of 19 sliding steel mesh security cage doors with complete labor, materials, delivery, and installation services. The doors must meet commercial-grade security standards and feature heavy-gauge welded steel mesh panels, steel frames suitable for interior mounting to concrete/drywall surfaces, black powder-coated finish, Grade 1 commercial hookbolts, and high-security Medeco mortise cylinders with ADA-approved thumbturns. All cylinders will be keyed to a new master key system with individual groups keyed separately.
The specification details 19 total door openings with varying dimensions: 16 doors at 98" x 60", 2 doors at 98" x 59", and 1 door at 97.5" x 60". Vendors are required to field-verify all opening dimensions on site before fabrication and report any discrepancies immediately. Installation requirements include removal of existing hardware, full installation of doors and frames, integration of keyed systems, and on-site testing and demonstration of door functionality. A mandatory site visit is scheduled for August 18, 2026, at 9:00 AM at 5001 Flamingo Road, Miramar, FL 33027, with the point of contact being CPT Shannon McGuire. While attendance is optional, vendors must RSVP no later than August 13, 2026, at 10:00 AM. The vendor is responsible for all permits and building code compliance, with the Miramar Armory bearing no responsibility for vendor errors or code violations.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - W911YN26QA017.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sliding Security Cage Door Specifications This document provides the mixed formal contract and technical specifications for the procurement and installation of 19x sliding steel mesh security cage doors. Vendors shall use this specification when preparing bid proposals for the Miramar Armory.
1. General Requirements Vendors shall provide all labor, materials, fabrication, delivery, and installation of 19x sliding steel mesh cage doors. All supplied products must meet or exceed commercial-grade security standards. Vendors must field-verify all door opening dimensions on site before fabrication.
2. Door Construction Specifications (Refer to Exhibit 1 Below) Heavy-gauge welded steel mesh door panel Sliding door configuration Steel frame suitable for interior mounting to concrete/drywall wall and concrete floor Black powder-coated finish Grade 1 commercial hookbolt High-security Medeco mortise cylinder ADA-approved thumbturn All cylinders keyed to a new master key system Individual groups keyed separately All mounting and installation hardware included
3. Door Opening Sizes (Refer to Exhibit 2 Below) The following opening sizes were identified in the provided floor plan:
16x Doors: 98" x 60" 2x Doors: 98" x 59" 1x Door: 97.5" x 60" Vendor must field-verify each opening dimension prior to fabrication. Any discrepancies discovered during field verification must be reported immediately.
4. Installation Requirements Removal of any existing hardware as required Full installation of doors, frames, and lock hardware Integration of keyed systems On-site testing and demonstration of door functionality
5. Exclusions No permits included Vendor responsible for compliance with all applicable building codes Miramar Armory not responsible for vendor errors or code violations
SITE VISIT
Date: 18 August 2026 Time: 9:00 AM Location: 5001 Flamingo Road, Miramar, FL 33027 POC: CPT Shannon McGuire shannon.c.mcguire3.mil@army.mil; 904-682-6265 x53121
RSVP NLT 13 August @ 10:00 AM by submitting Full Name & Social Security Number to:
shannon.c.mcguire3.mil@army.mil; (904) 682-6265 x53121
***Attendance is not required and will not prohibit quote submissions.***
Exhibit 1: Door Style/Model
Exhibit 2: Layout image1.jpeg image2.png
File details come from the government source that posted it. Updated .