Product Description.pdf

PURCHASE DESCRIPTION

FOR

Stratasys Origin One

July 7, 2022

5925 Southgate Ave

BLDG. 205

ATTN: Taylor Gittins

HILL AFB UT 84056

1.0. DESCRIPTION OF REQUIREMENTS

In order to provide the highest quality of service to our Air force users. The RAPID innovation center requires STRATASYS Origin One machines. The ability to print additional materials will help fulfill needs that are presented from the users of the RAPID innovation center. The new Origin printers have off network software that allows us to maintain the cyber security we need to print parts for our program offices. Specific requirements are listed below.

1.1. EQUIPMENT

The following equipment and accessories shall be provided:

• Origin One DLP printers – Quantity 2 o Tool kit and accessories o Offline version of Software o Unlocked to allow any material to be used o Any software needed to operate or produce parts

• Origin One Build trays – Quantity 6

• Origin One Build heads – Quantity 2

• Origin One Tray sheets – 5 packs of 20 each for 100 total

• Origin One train main Teflon gaskets – Quantity 5

• Origin One fan filters – Quantity 3

• Demi 430 Automated Submersible Resin Removal Solution Station (or comparable option) o 14x14x14 inches minimum chamber o Exterior dimensions not to exceed 36 inches (914.4 mm) wide or long o Height less than 60 inches (1,524 mm) o At least one exterior dimension must be less than 30 inches (762 mm) o At least 145 degrees Fahrenheit (62.78 degrees Celsius) o Capacity 15-20 gallons o Multiple configuration features and baskets o Programmable o Casters o Able to wash Plolyjet/FDM/SLA/DLP/CLIP parts o Dual agitation including heater and ultrasonics o Vortex pumping scheme o 120V AC Power o Demi SUB0355 Slotted Shelf o DEMI 430 MAC0443 Enclosed Basket o DEMI 830 MAC0443 Enclosed Horizontal Basket

• YAMATO DKN602C programmable oven (or comparable option) o 500X500X500 mm minimum size o Exterior dimensions not to exceed 35 inches (889 mm) in any dimension (WxDxH) o At least one exterior dimension must be less than 30 inches (762 mm) o Temperature range: room temperature to 210 degrees Celsius o 36 hours or more of programmable time o 10 or more programmable steps o Variable ramp rate o 115 V AC power

1.2. MATERIALS

The following materials shall be provided:

o Loctite 3D IND402 – 30 kg (Pack of 6 x 1 KG each, Quantity 5) o Loctite 3D 3955 FST – 30 kg (Pack of 6 x 1 KG each, Quantity 5) o PLM-403-SUB Detergent – 20 gallons

1.3 TRAINING

Contractor shall provide training for setup, calibration, operation, and maintenance of Origin One 3D printer and accessories. At the end of the training operators shall be able to independently produce parts on the 3D printer and post process.

1.4. CONTRACTUAL REQUIREMENTS

1.4.1. Delivery

The contractor shall deliver the equipment to the following address located at Hill Air Force Base:

809TH MXSS/MXDTAD

5925 Southgate Ave Bldg. 205 Attn: Taylor Gittins Hill AFB UT 84056

1.4.2. Warranty

The contractor shall provide a minimum 1 year warranty which warrants all products provided under this contract, under normal use, free from defects in materials and workmanship and that system will perform its design function for a period of no less than one (1) year. Warranty period to start from date of final acceptance. Any defects in materials or workmanship or failure of any product or component to perform its designed function during the warranty period shall be fixed by the contactor at no additional cost to the Government.