Product Description.docx
DOCX document 15 KB Posted
- Attached to
- Air Compressor
- Solicitation number
- 149AirCompressor
- Issued by
-
Department of the Army National Guard
About this file
The document is a Product Description for an Air Compressor solicitation (Number: 149AirCompressor) issued by the Department of the Army National Guard for the 149 Fighter Wing at Lackland AFB, Texas. The procurement seeks a 10 hp duplex air compressor package with specific technical requirements, with award to be determined by technical acceptability and lowest price. The example model solution is a Champion Advantage Series HR10D-24, which includes two R30D Champion 4-cylinder air compressor pumps, each driven by a 7.5 hp motor, mounted on a 240-gallon horizontal air receiver tank.
Key components of the required system include a duplex control box with magnetic starters and overload switches, two belt guard air-cooled aftercoolers, low oil shut-off switches, an electric timed automatic tank condensate drain, vibration isolator pads, an Altec Air RAD-75 cfm refrigerated air dryer, and associated filter kits. Vendors must provide all installation materials, including tank anchors, service valves, flexible hoses, minor wiring, and plumbing adaptations. Potential bidders are instructed to submit questions to Derek.Guedes.3@us.af.mil before the posting's close, with a forklift available on-site if needed during installation.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Product Description
Award to be determined technically acceptable by end user and lowest price. This is not a brand specific request for quote, the equivalent or better of below must meet customer expectations. Questions sent to: Derek.Guedes.3@us.af.mil before close of posting.
Delivery and installation to 149 Fighter Wing, Lackland AFB Texas 78252
Quote to include Material to make installation - Tank anchors, tank service valve to existing plumbing - anti vibration metal flexible hose, minor _wire to adapt to existing power outlet in the compressor room (no new electrical circuit), plumbing to adapt from existing refrigerated air dryer plumbing to the new refrigerated air dryer.
Example of technically acceptable model solution:
Champion Advantage Series HR10D-24. 10 hp duplex air compressor package 460 volt 3 phase electric motor driven - 2 x compressors and 2 x motors mounted on a singe 240 gallon horizontal air receiver tank. Includes TEN011732 460 volt kit The Advantage Series Duplex package comes standard _with the following_;
2 ea. R30D Champion 4 cylinder air compressor pumps each driven _with a 7.5 hp o.d.p electric motor, _both air compressor motors units have a totally enclose _belt guard.
Includes_;
- Duplex control _box housing 2 x magnetic starters and overload switches and Alternating relay, 120 volt control circuit transformer.
- 2 x Belt guard air cooled aftercooler to precool the compressed air to the tank.
- 2 x Low oil shut off switches
- 1 x 115 volt electric timed automatic tank condensate drain
- 1 set of 4 rubber tank mounting vibration isolator pads to mount tank to concrete
-Altec Air RAD- 75 cfm 115 volt 1 ph refrigerated air dryer -Altec Air Refrigerated air dryer filter kit, 1 - pre dryer filter assy , 1 - post dryer fine aerosol filter assy
-Forklift on site if needed
File details come from the government source that posted it. Updated .