Product Description-A10 Canopy Covers Final.pdf
PDF 226 KB Posted
- Attached to
- A10 Canopy Sources Sought Synopsis
- Solicitation number
- FA822424Q000004
About this file
This document is a Product Description and Requirements for the fabrication and delivery of custom-designed fiberglass parts to support Plastic Media Blast (PMB) operations at Hill AFB. The parts must be fabricated per provided drawings to a thickness of 1/16 inch, with two units of each part design required. The contractor must obtain approval on the mold dimensions before proceeding with the fiberglass layup, and provide documentation of materials, manufacturing processes, and relevant certificates. The completed parts must be delivered within 90 days of award, to the specified address at Hill AFB, and will be inspected upon receipt. The contractor shall provide a standard commercial warranty on the parts.
This requirement is related to a pre-solicitation for the A10 Canopy Sources Sought Synopsis, issued by the Department of the Air Force Materiel Command Air Force Sustainment Center. The synopsis provides details on the forthcoming solicitation for this requirement.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| A10 Canopy Sources Sought Synopsis.docx | DOCX document | |
| A10 Windshield Cover.pdf | ||
| A10 Canopy Cover.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Product Description & Requirements A-10 Custom Fiberglas Canopy Covers
United States Air Force
Prepared by: Justin Spencer August 8, 2024
1 Description
Fabrication and delivery of custom-designed fiberglass parts to support Plastic Media Blast (PMB) operations at Hill AFB. All parts fabricated by the contractor shall meet the specifi-ations and requirements set forth by the cognizant engineering authority, as outlined below.
2 Specifications
Parts shall be fabricated per drawings X202405988 and X202405989 using fiberglass material to a thickness of 1 inch. This order calls for (2) EA of both part designs. Approval from cognizant engineering authority shall be obtained on the completed mold dimensions before proceeding with fiberglass layup. The contractor shall provide documentation of materials used, manufacturing processes, and any certificates relevant to the final product.
All drawings and designs related to this order are the sole property of the United States Air Force, and may not be distributed, replicated, or otherwise reproduced without prior consent from the owning organization.
3 Changes
No changes may be made to these requirements without prior approval from the cognizant engineering authority.
4 Delivery
Completed parts shall be shipped to the address below. Completed parts shall be deliv-ered within 90 days ARO, unless otherwise approved. Delivery can be coordinated with the Project Engineer at (303)562-8445. Delivery hours are Monday through Friday, 8:00 AM to 2:00 PM. Truck entry is through the North Gate from the 5600 South exit of I-15.
Attn: Justin Spencer 5875 South Gate Ave Hill AFB, UT 84056
Upon receipt, parts shall be inspected for maintainence of integrity during shipping and manufacturing quality for full acceptance.
5 Warranty
Standard commercial warranty shall be provided by the contractor.
File details come from the government source that posted it. Updated .