Product Description 6 May 2024.docx

Product Description/Technical Requirement Package (TRP) For Procurement of Ejection Seat Dolly Assembly 309th Aircraft Maintenance Group (AMXG)/570 AMXS (F-35) 06 May 2024

1. Requesting Agency

USAF, 309 AMXG/570 AMXS

Title: Ejection Seat Dolly Assembly

2. Purpose The purpose of this requirement is to procure ten (10) of X202405902 Rev A drawing configuration Ejection Seat Dolly assemblies to be fabricated/manufactured and delivered to building 584 at Hill AFB, UT. The Ejection Seat Dolly assemblies are used to hold the F-35 ejection seat during aircraft repair as part of the Egress program at Hill AFB, UT.

3. Technical Requirements Quantity: The Contractor shall provide ten (10) each of Drawing X202405902 Rev A configuration. All DATA Rights and Drawing packages are the sole property of the USAF/309 AMXG/EN.

Quality: All items shall be clean of dirt, burrs, material shavings, cutting oil, etc. upon delivery and meet the requirements of X202405902 Rev A.

Changes: Only the Government Representative (GR) reserves the right to make changes to X202405902 Rev A drawing, scope, design, and configuration as required. No other alterations allowed without prior approval.

Drawings: Government contracting officer will issue drawing package upon request. A Solidworks / Iges 3D model file of the assembly and parts is also available upon request. The e- drawings viewer can be down-loaded free of charge from www.edrawingsviewer.com.

Non-Disclosure Agreement: Upon award of contract, awardee will be required to sign a non- disclosure agreement if any additional technical drawing package information, i.e. CAD data, is requested. The non-disclosure agreement is not inclusive for full release of all CAD data or proprietary information for the project. The requested additional technical information, if deemed required by GR, will be provided on a need-to-know basis.

The contractor shall ensure that all applicable Government-Off-The-Shelf (GOTS) and Commercial-Off-The-Shelf (COTS) IA and IA-enabled products comply with AFI 33-200, Information Assurance. Some of these products must be Committee on National Security

Systems Policy 11 (CNSSP-11) compliant, requiring them to be validated by accredited labs under the National Information Assurance Partnership (NIAP) Common Criteria Evaluation and Validation Scheme or National Institute of Standards and Technology (NIST) Federal Information Processing Standards (FIPS) Cryptographic Module Validation Program (CMVP) as identified in the sections below.

3.1 Asset Tagging

Identify Ejection Seat Dolly assemblies as specified per X202405902 Rev A 5 drawing.

4. Ordering Table

Ejection Seat Dolly assemblies

X202405902 Rev A

5. Technical Contractual Requirements (mandatory)

5.1 Trade Agreement Act (TAA)

Fabricated products and components used must be compliant with the Trade Agreements Act of 1979 (TAA) and related clauses in Section I of this contract. In accordance with DFARS 252.225-7021, the Trade Agreements Certificate at DFARS 252.225-7020 shall be provided for each end item defined and specified in a solicitation that exceeds the TAA threshold subject to the waivers and exceptions provided in FAR 25.4, and DFARS 225.4 offered in response to any RFQ issued under this contract.

All products and components used to fabricate/manufacturer the Ejection Seat Dolly assemblies must be TAA compliant, purchased from the original manufacturer or authorized reseller and are not developed or hosted in suspect countries.

6. Delivery Requirements

6.1 Timeframes

Ejection Seat Dolly assemblies shall be delivered no later than eleven (11) weeks from contract award.

6.2 Delivery Delays

Contractors are required to meet the timeframes as stated in section 6.1 unless Department of Commerce approval and/or review activities prevent the contractor from meeting these timeframes. In the event that the contractor determines they are unable to achieve the stated timeframes, the contractor shall notify the Contracting Officer within two (2) business days of such determination, or immediately upon such determination if operating under the Emergency/War Tempo timelines.

6.3 Shipping Information

All products shall be shipped to:

Attn: Alex Willie, (801) 777-3365

7240 South Gate Ave, Bldg. 584 Hill AFB, UT 84056

Inspection/Acceptance: The following Government officials are responsible for receiving the products and performing inspection:

Primary GR POC: Alex Willie, (801) 777-3365, 801-336-7703 Alt POC: Paul Gibson, (801) 586-7832 Alt POC: Jacob Delker, (801) 586-1814

(end)