Prod Description_Backbacks.doc

Ohio Army National Guard RRB Statement of Work

FY23

PROJECT TITLE: Multi-cam Backpack with Ohio National Guard logo PURPOSE: Recruiting and Retention Recognition and Promotional Item

SCOPE OF WORK: The contractor shall provide all materials necessary to meet the required specifications that are defined in this statement of work (SOW). These items should be delivered to Beightler Armory, ATTN: SFC Joshua Mohler, 2825 W. Dublin Granville Rd., Columbus, OH 43235. The contractor shall provide items to the standards and specifications in this SOW.

SPECIFICATIONS REQUIRED:

Color: Multicam Material: 600D polyester

· 3 or more zippered compartments

· 2 or more zippered exterior pockets

· built-in organizer & key holder on the exterior compartment

· mesh pockets on both sides

· reinforced rubber on the bottom exterior of the backpack

· padded back panel

· padded adjustable shoulder straps

· padded webbed carrying handle.

· sternum strap 12.5"w x 16"h x 11"d if possible

· No “hip padding” or “hip strap” on pack.

· Modular lightweight load-carry equipment (MOLLE) webbing, all horizontal (on sides and front)

· Product must be Made in U.S.A. OR TAA Compliant

· If not quoting the specifications as required for the item the vendor must include a product specification sheet. The product must be equal to or greater than the stated specifications.

GRAPHIC SPECIFICATIONS

· Logo embroidered on the exterior pocket of item.

· Logo Color: Black and Yellow (PMCS:123C)

· Logo Size: minimum of 3” W x 3 ½” H

· Logo will be centered on the exterior of the backpack

· Call to action website to be centered under the logo, NATIONALGUARD.COM/OHIO, in a black thread.

· Logo will be provided to vendor upon award of contract.

Quantity Needed: 3500

PACKAGING SPECIFICATIONS REQUIRED:

· Items are to be packaged in boxes of 25.

· Quantity marker must be clearly marked on package.

SW-6: PROOF REQUIREMENTS:

· Require unlimited virtual examples prior to approval and production

· Require up to 2 physical examples prior to approval and production