PreSol_DraftSOW.pdf

Rev 3/31/16

Statement of Work

MK189 Mod 0 Tilt Adapters and MK23 Mod 0 Base Assemblies

1. INTRODUCTION

The Naval Surface Warfare Center Corona (NSWCCO) Division, Measurement Science & Engineering Department, Interface Engineering & Assessment Division, Code MS20 designs, builds, and maintains Navy Special Interface

Gages for ship-launched missiles, surface, underwater munitions, air-launched missiles and strategic weapons including Fleet Ballistic missile systems and subsystems.

2. BACKGROUND

The VLS Program is periodically in need of additional handling equipment to support the transportation and handling of various components and assemblies to replace damaged equipment.

3. SCOPE

The scope of this effort is to procure eight (8) MK 189 Mod 0 Tilt Fixture Adapters and six (6) MK 23 Mod 0 Base

Assemblies.

4. APPLICABLE DOCUMENTS

TABLE 1: MK23

Drawing Title NORs

5167580E Frame Weldment

5167581B Steady Rest Weldment

5167584C Washer

5167585F Weldment Stand

5167587C Bearing Pad

5167588B Guide Block

5167605C Name Plate

6213763C Base Assembly

6213763e_DL Data List

6213767rev Information Plate NOR 001

6213768rev Information Plate NOR 001

6213769A Information Plate NOR 001

6213878rev- Shim

6214330rev Plate Ordalt NOR 001

TABLE 2: MK189

Drawing Title NORs

DL6213764F Data List

8601620 Collar Guide, Top

8601619 Collar Guide, Bottom

8601618 Weldment Collar

8601617 Collar Hing Weldment

8411301B Gasket

8411300B Bolt Plate

8411296B Assembly Collar Pin (Short)

8411295B Collar Pin

8410892d Plate, Ordalt, Various

Rev 3/31/16

6213766A Name Plate NOR 001

6213764D Adapter, Vertical Launching System Tilt Fixture

6213648D Slide

6213644C Oil Seal

6213643C Bearing

6213185D Plunger Seat

6213184B Bearing Block

6212905D Spring Plunger

5167597E Cap, Inside

5167596E Cap, Outside

5167591C Collar Guide, Vert

2644612W Lanyard

5. REQUIREMENTS

5.1 MK189 Mod 0 VLS Tilt Fixture Adapters

5.1.1 Offeror shall manufacture eight (8) MK 189 Mod 0 VLS Tilt Fixture Adapters in accordance with the drawings located in Exhibit A.

5.2 MK 23 Mod 0 Base Assembly

5.2.1 Offeror shall manufacture six (6) MK 23 Mod 0 Base Assembly in accordance with the drawings located in

Exhibit B.

5.3 Logistics Requirements

5.3.1 Offeror shall ship each individual unit with plywood/lumber skid shipping container.

5.4 Notice of NIST SP 800-171 DoD Assessment Requirements. This requirement contains Covered Defense

Information (CDI). An unclassified information system that is owned, or operated by or for, a contractor and that processes, stores, or transmits CDI is subject to the requirements of NIST SP 800-171. Contractors required to implement NIST SP 800-171, are required at time of contract award to have at least a Basic NIST SP 800-171

Assessment that is current (i.e., not more than 3 years old).

6. GOVERNMENT FURNISHED PROPERTY

N/A

6.1 Government Furnished Material

6.2 Government Furnished Equipment

6.3 Government Furnished Information

7. DELIVERABLES