Pre-Solicitation_Notice-Spillway_Gantry_Crane_Removal__Tiber_Dam_1.pdf

PDF 175 KB Posted

Attached to
Spillway Gantry Crane Removal, Tiber Dam, Chester, Montana
Solicitation number
140R6026R0014
Issued by

About this file

This is a Pre-Solicitation Notice for a spillway gantry crane removal project. The Bureau of Reclamation's Missouri Basin Regional Office intends to issue a Request for Proposal (RFP No. 1406026R0014) on or around June 22, 2026, for the removal of a spillway gantry crane located at Tiber Dam, approximately 20 miles southwest of Chester, Montana. The proposal closing date is anticipated to be 30 days from RFP issuance, with submissions required via electronic email to the Contract Specialist and Contracting Officer.

The principal work scope includes removing all crane components (frame, bridge, hoist, rail, and rail support beams and columns) while minimizing damage to concrete decks and piers, with all anchors left flush to the concrete surface. The contractor must load, haul, and legally dispose of all materials off-site, with salvage permitted at the contractor's discretion. Following crane removal, the contractor shall install and remove government-furnished stoplogs into each of three spillway gate bays, with stoplogs remaining in place for one day per gate during the working week (Monday-Thursday) to allow operational testing of radial gates. The estimated price range is $25,000 to $100,000. The overall period of performance is approximately 73 calendar days, with work commencing within 10 days of the Notice to Proceed. Work shall be performed Monday through Thursday from 7:00 AM to 5:30 PM, with operations restricted to August 15 through November 1 unless Reclamation approval is obtained based on reservoir elevations. The acquisition is designated as a Total Small Business Set-Aside under NAICS code 237990 (Other Heavy and Civil Engineering Construction) with a small business size standard of $45 million and PSC code Z2KA (Repair or Alteration of Dams). All contractors must register in the System for Award Management (SAM) prior to submission, and payment requests must be submitted electronically through the Invoice Processing Platform (IPP).

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Pre-Solicitation Notice Spillway Gantry Crane Removal, Tiber Dam, Chester, Montana

THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES

The Bureau of Reclamation (Reclamation) Missouri Basin Regional Office intends to solicit a Request for Proposal (RFP) for Spillway Gantry Crane Removal, which is located at Tiber Dam, approximately 20 miles southwest of Chester, Montana, in Liberty County. The RFP will be issued on https://sam.gov under Solicitation/RFP No. 1406026R0014*.

*The Sources Sought for this requirement was posted on SAM.gov under Request for Quote (RFQ) No. 140R6026Q0034. This RFQ number has been replaced by the RFP number above.

The principal components of work include the following:

The Contractor shall provide all labor and equipment to perform the following tasks.

A. Remove all crane components, including the crane frame, bridge, hoist, rail, and rail support beams and columns.

a. Connections to concrete decks/piers shall be removed by methods which minimize damage to the concrete. It is anticipated that all anchors embedded in the concrete substructure be flush with the concrete surface after the structure is removed. All concrete is to be left in place.

B. Load, haul, and legally dispose of all materials off site.

a. Contractor may salvage all materials at their discretion.

C. After removal of the existing crane components, install and remove government furnished stoplogs into each of the 3 spillway gate bays.

a. Stoplogs shall remain in place for 1 day for each gate to allow government forces to operationally test the radial gates. The day that the stoplogs are left in place shall be during the working week, Monday through Thursday.

b. Only one full set of stoplogs is available and will have to be moved between gate bays.

c. After all the gates have been tested, place the stoplogs back in the storage area near the spillway.

In accordance with Revolutionary Federal Acquisition Regulation (FAR) Overhaul (RFO) part 15, Contracting by Negotiation, Reclamation intends to issue Solicitation/RFP No. 140R6026R0014 on or around June 22, 2026. The closing date for the acceptance of proposals is anticipated to be 30 days from the date the solicitation is actually issued. Proposals are expected to be submitted by electronic email to the Contract Specialist and Contracting Officer.

The estimated price range for this acquisition is between $25,000 and $100,000.

https://sam.gov/

Reclamation anticipates a Total Small Business Set-Aside for this acquisition.

The applicable North American Industry Classification System (NAICS) code is 237990, Other Heavy and Civil Engineering Construction, which has an associated Small Business Size standard of $45 million.

The applicable Product or Service Code (PSC) is Z2KA, Repair or Alteration of Dams.

The overall period of performance is anticipated to be around 73 calendar days. The contractor who receives the award is required to commence work within 10 days of receiving the Notice to Proceed. The period of performance is inclusive of receipt and acceptance of all submittals by Reclamation, as well as final cleanup. Work shall be performed Monday through Thursday, 7:00 AM to 5:30 PM. No work will be allowed during the night, Federal holidays or Sundays. Work is only allowed between August 15 through November 1. Work outside this window may be allowed with Reclamation approval depending on reservoir elevations.

For further information, interested offerors should contact the Contract Specialist, Sydney Oakes, at email address sydney_oakes@ios.doi.gov, and the Contracting Officer, Charlene Maurer, at email address charlene_maurer@ios.doi.gov. For record keeping purposes, telephone responses will not be accepted. It is incumbent upon contractors to monitor https://sam.gov for the RFP release and all subsequent amendments.

System for Award Management (SAM): Effective October 26, 2018, all contractors interested in doing business with the Federal Government must be registered in the System for Award Management (SAM) database prior to submitting an offer or quotation. Note: Registering in SAM does not constitute an automatic award of any contract or agreement to the registering contractor.

SAM is a centralized database consolidating the Central Contractor Registration (CCR), the online Representation and Certi�ications Application (ORCA), and the Excluded Parties List System (EPLS).

Additionally, the contractor’s DUNS and BRADSTREET and banking information are required for the SAM registration. Annual con�irmation of registration requirements must be accomplished through the SAM website at https://www.sam.gov. For assistance with registering in SAM, contact the Federal Services Desk at 1-866-606-8220.

Note: System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Examples include 52.222-25, Af�irmative Action Compliance, and paragraph (d) of 52.212-3, Offeror Representations and Certi�ications—Commercial Products and Commercial Services. Contracting of�icers will not consider these representations when making award decisions or enforce requirements. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.

Invoice Processing Platform (IPP): Payment requests for the anticipated contract are required to be submitted electronically through the U.S. Department of Treasury’s Invoice Processing Platform (IPP) system. The IPP website is https://www.ipp.gov. The contractor must use the IPP website to register access and submit requests for payment. Contractor assistance with enrollment can be obtained by contacting the IPP production helpdesk via e-mail at ippgroup@bos.frb.org or by telephone at (866) 973-3131. If the contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the contractor must submit a waiver request in writing to the Contracting Of�icer with their proposal.

mailto:sydney_oakes@ios.doi.gov mailto:charlene_maurer@ios.doi.gov https://sam.gov/ https://www.sam.gov/ https://www.ipp.gov/ mailto:ippgroup@bos.frb.org

File details come from the government source that posted it. Updated .