Pratt Whitney Letter RFQ - SPRTA1-25-Q-0152.pdf

PDF 474 KB Posted

Attached to
DEFLECTOR, AIRFLOW
Solicitation number
SPRTA125Q0152
Issued by

About this file

This is a Letter Solicitation (RFQ) from DLA Aviation at Tinker AFB to Raytheon Technologies Corporation d/b/a Pratt & Whitney for SPRTA1-25-Q-0152. The solicitation is for 2 each of DEFLECTOR, AIRFLOW (P/N 4076227-01, NSN 2840013240280NZ), which is sole-sourced to Pratt & Whitney.

The requirement specifies new manufacture only (surplus not authorized) with delivery required on or before November 9, 2025. This is a Critical Safety Item requiring AS 9100 quality standards and DFARS 252.211.7003 IUID compliance. Inspection and acceptance are at origin, with Buy American Act provisions applying. The solicitation response is due by February 18, 2025. The items are for Foreign Military Sales (FMS requisition DKSH5V31660310, FMS LOA KS-D-KDJ/001) with shipping to DKS005 (FMS). The procurement will be conducted under the terms and conditions of SPE4A1-21-G-0001.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

MEMORANDUM FOR: Ryan Miller / Raytheon Technologies Corporation d/b/a Pratt & Whitney

FROM: DLA Aviation – AOAB / 3001 Staff Dr., 2B97 / Tinker AFB, OK 73145

SUBJECT: Letter Solicitation SPRTA1-25-Q-0152 Purchase Request FD2030-24-00636

This Solicitation is issued for the purpose of acquiring the below requirement which is sole sourced to Pratt & Whitney.

CLIN P/N NSN Noun Quantity

0001 4076227-01 2840013240280NZ DEFLECTOR, AIRFLOW 2 EA

Please provide pricing and delivery for purchase of this NSN in accordance with the terms and conditions of SPE4A1-21-G-0001.

Pratt & Whitney is requested to provide capacity, PLT and pricing based upon the quantity listed below.

Required Quantity: 2 each – New Manufacture - Surplus is "NOT AUTHORIZED" for this procurement / Early Delivery Acceptable

IUID APPLIES: DFARS 252.211.7003

Critical Safety Item (CSI): YES

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required.

Quality Assurance: Higher Level Contract Quality Requirements, AS 9100 Buy American Act/balance of Payments Program

Requested Delivery: 2 each On or Before 09 November 2025

Ship to: Supplemental Address: Mark For:

CLIN 0001 – DKS005 (FMS) DA5KDJ DKSH00

TAC: DFMS

SAMIS FMS REQUISITION: DKSH5V31660310, FMS LOA KS-D-KDJ/001

The terms and conditions of SPE4A1-21-G-0001 will apply to this NSN. Please respond with your pricing and delivery for the item by the solicitation closing date of 18 Feb 2025. If you have any further questions, please contact Kristine Bruhwiler at 405-650-7796 or kristine.bruhwiler@us.af.mil.

Sincerely, //SIGNED//

Kris Bruhwiler Contracting Officer

ATTACHMENTS:

NOTE 1 – Packaging to be accomplished IAW the Packaging Requirements document attached.

NOTE 2 – Transportation to be accomplished IAW the applicable Transportation document attached.

NOTE 3 – IUID Checklist

DEFENSE LOGISTICS AGENCY

AVIATION AT OKLAHOMA CITY

3001 STAFF DRIVE POST 2B95

TINKER AIR FORCE BASE, OKLAHOMA 73145-3015

27 Jan 2025 mailto:kristine.bruhwiler@us.af.mil

ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST

I. IUID DETAILS: DFARS 252.211.7003

SECTION (c) (1) (ii) APPLIES TO THE FOLLOWING:

ITEM REQUIRING IUID MARKING

NSN

2840013240280NZ

VERSION NUMBER

NOUN

DEFLECTOR,AIRFLOW

INITIATOR

Sanor, Dacota R

ORGANIZATION CODE / OFFICE SYMBOL

AFLCMC / LPSEA

COMMERCIAL PHONE

405-734-4526

DSN PHONE

884-4526

CAGE / REFERENCE NUMBER

MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130

MARKING GUIDANCE

Recommended Marking Instruction

ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE

Bag/Tag

MARKING METHOD

BAG/TAG

DESCRIPTION / LOCATION

Bag/Tag this item

REMARKS

ATTACHMENT(S)

II. EMBEDDED ITEMS

SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:

NSN NOUN

CAGE / REFERENCE NUMBER

ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 2840013240280NZ

MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE MARKING METHOD

DESCRIPTION / LOCATION

REMARKS

ATTACHMENT(S)

Page 1 of 1IUID Version 1Generated by PRPS using Jasper Reports on 04 Mar 2024

PACKAGING REQUIREMENTS

PURCHASE INSTRUMENT NUMBER: FD20302400636-00 VERSION: 2

MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN

PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:

AAA MIL-STD-2073-1 / SPI MIL B F013240280 A 01310 - 06 NOV 2001

ITEM(S):

2840013240280NZ

CODED DATA:

QUP ICQ

PRES

METH CD

PRES

MTL

WRAP

MTL

CUSH

DUNN CT

UNIT

CONT

INT

CONT UCL

SPEC

MKG

UNIT PACK

WEIGHT

LENGTH

WIDTH

DEPTH

CUBE OPI

ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:

SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:

VENDOR PACKAGING INSTRUCTIONS:

Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.

Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.

ORGANIZATION / OFFICE SYMBOL:

406 SCMS / GULAA

PACKAGING SPECIALIST:

Strain, Verlisher M

PHONE NUMBER:

405-582-9761 / 852-9761

SIGNATURE:

//SIGNED//Strain, Verlisher M

DATE:

24045 - 14 FEB 2024

Page 1 of 1AFMC 158 Version 2Generated by PRPS using Jasper Reports on 04 Mar 2024

TRANSPORTATION DATA FOR SOLICITATIONS

COMMODITY: See Continuation

PURCHASE INSTRUMENT NUMBER:

FD20302400636-00

DATE INITIATED:

14 FEB 2024

STOCK NUMBER: See Continuation

X ORIGIN DESTINATION OTHER DATA / FIRST ARTICLE F.O.B. DESTINATION(Specify)

F.O.B. TERMS RECOMMENDED AS BEST SUITED FOR THIS PROCUREMENT

TRANSPORTATION PROVISIONS / CLAUSES FAR CITATION

F.O.B. Origin 52.247-29 Clearance and Documentation Requirements 52.247-52 Freight Classification Description 52.247-53 Marking of Shipments 47.305-10 Evidence of Shipment FMS 352.225-U037U Contact DCMA Transportation Contact DCMA Transportation on ALL "DCMA Administered" contracts prior to shipment for shipping instructions using the DCMA Shipment Instruction Request (SIR) eTool System, at http://www.dcma.mil <http://www.dcma.mil/> for ALL FOB:

Origin, Foreign Military Sales (FMS), and FOB: Destination OCONUS/Export movements to obtain the appropriate DOD regulatory clearances, shipping documentation and instructions from your cognizant DCMA Transportation Office. If you are new to DCMA, and do not already have a SIR eTool account, you will first need to request an account via DCMA External Web Access Management (EWAM) application which can be accessed at http://www.dcma.mil. If you need additional assistance, email DCMA Transportation Group at: Transportation.Division@dcma.mil. Do not move any freight to a water or aerial port prior to contacting DCMA or it will become frustrated. Failure to contact the responsible DCMA may result in vendor incurring additional expenditures.

Vendor Transportation Instructions

TACRN:

AAA

TRANSPORTATION FUNDS INFORMATION:

Purchase Instrument Line LOA: 9711X8242.0002 4FX LC5W CKDJKS 000000 00000 001000 503000 F03000 FSR: 027550 PSR: 225158

First Destination Transportation Account Code: DFMS

Miscellaneous Obligation / Reimbursement Document:

Second Destination Transportation Account Code:

FMS LOA: 9711X8242.0002 4FX LC5W CKDJKS 000000 00000 0

Additional Funding Information:

ITEM / SHIP TO(s):

NSN / Pseudo NSN: 2840013240280NZ

Purchase Instrument Line Item Number: 0001

Ship to (DoDAAC / MAPAC): DKS005

Mark For: DKSH00

Ship To (Address):

WPOD:

APOD:

BBP / CCP:

RIC:

Requisition Number: DKSH5V31660310

Supplemental Address: DA5KDJ

FMS Case: KDJ

Ship To (Remarks): TAC: DFMS

EVALUATION OF PORT BID OR PROPOSAL:

SOLICITATION DATA NOTES:

OTHER TRANSPORTATION DATA:

NAME

Etters, Mickie J

ORGANIZATION / OFFICE

SYMBOL

406 SCMS / GULAA

COMMERCIAL / DSN

PHONE

478-222-0125 / 472-0125

SIGNATURE

//SIGNED//Etters, Mickie J

DATE

14 FEB 2024

Page 1 of 1DD FORM 1653 Version 2Generated by PRPS using Jasper Reports on 04 Mar 2024

2025-01-27T13:42:42-0600
BRUHWILER.KRISTINE.M.1140242337

File details come from the government source that posted it. Updated .