ALPA_NANO_CARBON_FILTER.pdf

This product has been tested and certified to meet

NSF/ANSI Std. 53 for Material Safety only.

Markets

Food, Beverage & Bottled Water Pharmaceutical & Biomedical Cosmetics & Personal Care Microelectronics Automobile Manufacturing Power Generation Machining (including EDM) Potable Water (POE, POU, Municipal, Personal) Municipal & Industrial Water

Applications

Waste Water (VOC’s, disinfectant by-products (DBP’s), trace toxic organics, endocrine disruptors, soluble & particulate dyes)

POE & POU - Residual chlorine, toxic organic pollu-tants

Polishing Filters (carbon fines, coagulation processes, water purification systems)

RO Prefiltration (Chlorine and SDI reduction) Process Water (turbidity, particulate, colloidal suspensions) Cooling Towers, Chill Water Loops (iron removal) Chemical-Biological Filters - protection against terrorist contamination of water supplies

Pleated filter cartridges infused with Powdered

Retention Capabilities

Chlorine Reduction: 2 ppm to less than 1 ppm for > 5,000 gallons (PAC2.5-10 AG) @ 1gpm flowrate

Testing performed by the Water Quality Association has determined that this product reduces Cysts by at least 99.98% at high flow rates

Silt Density Index (SDI): < 1.0 + 0.1 >99.9% Efficiency at 0.2 microns (latex spheres) >6.5 LRV Bacteria (E. coli) initial retention >5.0 LRV Virus (MS2) initial retention <0.01 NTU until Terminal ∆P: 35 psid (2.4 bar) Dirt Holding Capacity: 82 g/ft2

Features

Pleated construction yields high flow rates Available in standard DOE + SOE configurations Manufactured with strict quality control All components are manufactured with materials that meet FDA requirements 21CFR177.1520 for direct food contact applications.

ALPA Services (Pvt.) Limited

Activated Carbon further enhanced with the Agion silver-impregnated zeolite technology.

combination of high efficiency particulate filtration with highly active PAC is a further advancement in Nano Filter’s series of filters. and is a major breakthrough in activated carbon filtration.

Agion’s treatment provides long-term mitigation of biofouling – a potential source of premature plugging as well as odor and taste concerns often caused by bacteria, mold and fungus.

The line of NanoCarbon-AG filter cartridges offer a unique combination of efficiency, capacity, flow rate & low pressure drop for adsorption of particulate, chemical and soluble contaminants such as soluble organics and chlorine. Their best use is in those applications where particulate reduction combined with fouling-resistant soluble contaminant removal is desired. All NanoCarbon-AG filter cartridges are manufactured from 100% FDA-compliant materials.

Powdered Activated Carbon Nano Filter Cartridges + Agion

·r--------------,---------------.--------------, ~5" 1S· (INnoIpIIWIIIr) ~5" 110" (IIIUIIIcIpIIWIIIr) ~ 120" (IIIUIIIcIpIIWIIIr) "".5" 110" (IIIUIIIcIpIIWIIIr) .... .5"120"

.~~~~~=====---L_------~• 5 to 15

ItA f':+---------------------------------------~~~

I:+----~~~_O____IIu+----p.,._-H---If----.;I----.---If----'ll----------i t02+-__~~~--~--~----~----~r_------~Iu.

... 1I11III1 ....... __ ..... .- __

Materials of Construction

Temperature: 39-135oF (4-57oC)* pH Range: 5 to 10 Terminal Pressure Drop: 35 psi (2.4 bar) Maximum Salinity: >200,000 ppm

* Higher Temperature available

Surface Area ft2 (m2)

1.4 0.13

3.4 0.32

7.1 0.66

10.6 0.99

14.1 1.31

8.3 0.77

17.0 1.58

35.0 3.25

Dirt Holding Capacity grams 114.4 280.3 583.4 875.2 1161.2 683.5 1401.4 2882.9

Dimensions in

(cm)

2.75 x 4.8 7 x 12.2

2.75 x 9.75 7 x 24.8

2.75 x 20 7 x 50.8

2.75 x 30 7 x 76.2

2.75 x 40 7 x 101.6

4.5 x 9.75

11.43 x 24.8

4.5 x 20

11.43 x 50.8

4.5 x 40

11.43 x 101.6

Suggested Flow Rate gpm (lpm)

7.5

Peak Flow Rate* gpm (lpm)

Specifications

*Peak Flow Rate based on initial flow using new filter cartridge and clean water during laboratory testing.

This product has been tested and certified to meet

NSF/ANSI Std. 53 for Material Safety only.

Testing performed by the Water Quality Associa-tion has determined that this product reduces Cysts by at least 99.98%.

P re ss u re D ro p

P

Flow Rate (GPM)

NanoCarbon-AG SERIES

Part No PC 2.5-5 AG PC 2.5-10 AG PC 2.5-20 AG PC 2.5-30 AG PC 2.5-40 AG PC 4.5-10 AG PC 4.5-20 AG PC 4.5-40 AG

Media : NanoCarbon - PC + Agion Support: Polypropylene, Hot Melt O-rings/Gaskets: Neoprene

Operating Conditions

NanoCarbon - PC - AG Chlorine Removal (1 gpm Flow Rate)

Ordering Information Part No:

PC 2.5-5 AG PC 4.5-10 AG

PC 2.5-10 AG PC 4.5-20 AG

PC 2.5-20 AG PC 4.5-40 AG

PC 2.5-30 AG

PC 2.5-40 AG

NanoCarbon - PC - AG Flow Rate vs ∆P malik525@live.com Highlight