PR24-00163_FIRST ARTICLE.pdf
PDF 21 KB Posted
- Attached to
- SEAL, AIR, AIRCRAFT G
- Solicitation number
- SPRTA125Q0285
- Issued by
-
Defense Logistics Agency Aviation
About this file
This Data Item Description (DID) provides guidelines for creating a First Article Qualification Test Plan and Procedures, identified by document number DI-NDTI-81307A and approved on 21 NOV 2006. The document specifies the required format and content for contractors when developing a test plan for first article qualification, with the primary purpose of establishing comprehensive test procedures, test equipment, and inspection criteria.
The DID outlines specific content requirements for the test plan, including: purpose of test, applicable documents, description of units to be tested, detailed test descriptions with step-by-step procedures, operator instructions, test equipment specifications, drawings/schematics of noncommercial fixtures, and inspection criteria. The inspection criteria must define minimum performance requirements for the tested unit, covering worst-case scenarios for prime power input, signal levels, timing inputs, and outputs. This document supersedes the previous version DI-NDTI-81307 and is associated with a Defense Logistics Agency Aviation solicitation for a SEAL, AIR, AIRCRAFT G contract (Solicitation Number: SPRTA125Q0285).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| PR24-00163_TRNSPDATA_REPORT.pdf | ||
| PR24-00163_PKGRQMT_REPORT.pdf | ||
| SPRTA125Q0285.pdf | ||
| PR24-00163_LPF_QAR.pdf | ||
| PR24-00163_CDRL1_REPORT.pdf | ||
| PR24-00163_FA_REPORT.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
| DATA ITEM DESCRIPTION |
| Requirements: |
File details come from the government source that posted it. Updated .