PR0033JJ ECU SOW.pdf
PDF 121 KB Posted
- Attached to
- HDT 6T ECU TENTS San Pedro (2)
- Solicitation number
- 84-24-Q-PR0033JJARVIS2
About this file
This document is a Scope of Work (SOW) for the procurement of four (4) 6-ton Environmental Control Units (ECUs) for the U.S. Coast Guard. The contractor shall commence work within 5 days of notice to proceed and complete the entire work within 10 working days after contract award. The required ECUs are specified as Part Number 2004549, 6-ton Basic 208V/60HZ ECUs. The contracting officer's Quality Assurance Evaluator representative is MK1 Jesse Jarvis. The contractor must notify the QAE representative of the intended start date, and the work must be completed in accordance with the specification. The contractor is responsible for obtaining all required permits and licenses, and the job site must be left in a clean and neat manner upon completion.
The related federal contract opportunity is a combined synopsis/solicitation for the procurement of HDT 6-ton ECU Tents for the U.S. Coast Guard under Solicitation Number 84-24-Q-PR0033JJARVIS 2. This is a Firm-Fixed Price Purchase Order utilizing Simplified Acquisition Procedures in accordance with FAR Part 13 and Policies for the Acquisition of Commercial Items under FAR Part 12. Quotes are due by August 26, 2024, at 9:00 AM Pacific Time, and any questions must be submitted by August 22, 2024, at 8:30 AM Pacific. The contract will be awarded to the vendor with the Lowest Price Technically Acceptable offer.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SCOPE OF WORK
ECU
1. GENERAL REQUIREMENTS:
Provide 04 six ton Environmental Control Units
2. COMMENCEMENT, PROSECUTION, AND COMPLETION OF WORK:
Upon acceptance the contractor shall commence work NLT (05) days after notice to proceed and work diligently to complete the entire work ready for use by (10) working days after contract award.
3. SCOPE OF WORK:
Provide and deliver 04 prebuilt: P/N 2004549, ECU 6T BASIC 208V/60HX IEC CON
TAN. As per the quote. No other instructions or amplifying information is required.
4. SITE VISIT:
N/A
5. DESIGNATED CONTRACTING OFFICER’S QA EVALUATOR (QAE)
REPRESENTATIVE:
MK1 Jesse Jarvis jesse.d.jarvis@uscg.mil
310-521-4248
6. CONDITIONS AFFECTING THE WORK:
N/A
7. AFTER AWARD OF THE CONTRACT:
The contractor must immediately notify the contracting officer’s QAE representative of his intended start date. The work shall be done in accordance with the specification.
8. ORAL MODIFICATION:
No oral statement of any person other than the contracting officer shall in any manner or degree, modifies or otherwise affect the terms of this contract.
9. WORKMANSHIP:
All work shall be accomplished with the best standard practices, and by workmen thoroughly experienced in the required trades. The work shall be supervised by experienced personnel and shall be satisfactory to the Contracting Officer.
10. PERMITS:
The contractor shall without additional expense to the government, obtain all appointments, licenses, and permits required for the prosecution of the work. The contractor shall comply with all applicable federal, state and local laws.
11. CLEAN UP:
All trash and debris shall be removed from the site. The job site shall be left in a clean and neat manner.
12. UPON COMPLETION OF WORK:
Contact the Contracting Officer’s QAE Representative to arrange for inspection/acceptance of work.
mailto:jesse.d.jarvis@uscg.mil
File details come from the government source that posted it. Updated .