Power Point Drawing - Three Rail Molds.pptx
PPTX presentation 514 KB Posted
- Attached to
- Teflon Coatings Federal contract opportunity
- Solicitation number
- N0016724Q0214
About this file
This document is a solicitation (RFQ) for Teflon Coatings issued by the Naval Surface Warfare Center Carderock Division (NSWCCD). The Navy is seeking commercial Teflon coatings that meet the specified requirements. This is a small business set-aside opportunity with a NAICS code of 332813 and a size standard of 500 employees. The procurement will be a firm fixed price purchase order using simplified acquisition procedures. Quotes are due by 10:00 AM EST on 26 JULY 2024 and must be submitted via email to the Contracting Officer, Brittany Tavassoli. The Government intends to evaluate quotes on a lowest price technically acceptable (LPTA) basis without discussions. The solicitation incorporates standard FAR and DFARS provisions and clauses. An award will be made to the responsible quoter whose quote is most advantageous to the Government, price and other factors considered.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| N0016724Q0214_0001.pdf | ||
| PDF Drawing - Plate Moles.pdf | ||
| N0016724Q0214_Teflon.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Plate Molds 18 June, 2024
Richard Cohen Naval Surface Warfare Center Division Carderock Richard.cohen@navy.mil 301-227-4845
6/18/2024 8:47:54 AM
Plate Mold: Back Plate
Coat inside all holes as best as you can.
QTY: 6
Note: Coat one face and all edges with T1503 to release urethane 100x All Plates are 0.5” Thick
40” 38” Plate Mold: Back Plate Back Isometric View Plate Mold: Back Plate Front Isometric View Fully coat surface, edges, and screw heads Material: Aluminum 6061 T6 Weight: 110 lbs.
*Note: Location of stiffeners varies between plates but each plate will have 4 stiffeners (x16 screws) at similar spacing. Location and quantity of thru holes varies between plates *Thru Hole *Steel Screw Head
Plate Mold: Fill Plate
Coat inside all holes as best as you can.
QTY: 6
Note: Coat one face and all edges with T1503 to release urethane 100x All Plates are 0.5” Thick 40” 38” Plate Mold: Fill Plate Back Isometric View Plate Mold: Fill Plate Front Isometric View NPT Fill Hole Fully coat surface, edges, and screw heads *Steel Screw Head *Thru Hole *Note: Location of stiffeners varies between plates but each plate will have 4 stiffeners (x16 screws) at similar spacing. Location and quantity of thru holes varies between plates Material: Aluminum 6061 T6 Weight: 110 lbs.
image3.jpeg image4.jpeg image5.jpeg image6.jpeg image1.png
File details come from the government source that posted it. Updated .