Power Amplifier CSS.pdf
PDF 338 KB Posted
- Attached to
- NAVAIR Power Amplifier
- Solicitation number
- N6426724R0011
About this file
This document is a Calibration Standard Specification (CSS) for a Power Amplifier to be used by the Department of the Navy Metrology and Calibration Program. The Power Amplifier is a No Calibration Required (NCR) artifact intended to support the calibration of various test instruments in controlled environments at Depot Labs.
The key specifications for the Power Amplifier include a frequency range of 25 Hz to 1.2 GHz, a maximum power of 100 W, a gain range of 0 dB to 67 dB, a current range of 0 A to 100 A, and a voltage range of 10 V to 1,000 V. It must have Type N(f), 3.5 mm, and 2.4 mm connectors. The Navy is conducting market research through a Sources Sought notice for interested and capable vendors to provide the Power Amplifier per the attached CSS. Responses are due by July 4, 2024 and should include company information, business size, pricing, and industry feedback on the CSS.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CALIBRATION STANDARD SPECIFICATION
NAVAIR
POWER AMPLIFIER
DEPARTMENT OF THE NAVY
METROLOGY AND CALIBRATION PROGRAM
CSS ####
DISTRIBUTION STATEMENT A. APPROVED FOR PUBLIC RELEASE, DISTRIBUTION IS UNLIMITED.
MAY 2024
CALIBRATION STANDARD SPECIFICATION
NAVAIR
POWER AMPLIFIER
Prepared by:
Trevor Appler
Project Engineer
DEPARTMENT OF THE NAVY
METROLOGY AND CALIBRATION PROGRAM
Table of Contents
1.0 Scope
1.1 General
1.2 Usage
2.0 Requirements – Power Amp
2.1 Specifications
2.2 Accuracy
2.3 Connections
1.0 Scope
1.1 General
This document specifies the minimum requirements for a Power Amplifier Standard, herein referred to (for the Calibration Standards Specifications, CSS) as the “Power Amp”. The Power Amp will be used for a wide range of power applications. Such CALSTDs that it supports includes power sensors, power meters, and radio/radar test sets. The Power Amp is a No Calibration Required (NCR) artifact.
1.2 Usage
The requirements of this CSS are tailored to the intended use of the equipment. The Power Amp covered by this CSS is intended to support the calibration of test instruments in controlled environments. The Power Amp will provide calibration support to various Depot Labs.
2.0 Requirements – Power Amp
2.1 Specifications
The Power Amp should meet the following parameter specifications:
• Frequency o Lowest: 25 Hz o Highest: 1.2 GHz
• Power o Max Power: 100 W o Lowest Gain: 0 dB o Highest Gain: 67 dB
• Current o Lowest: 0 µA o Highest: 100 A
• Voltage o Lowest: 10 µV o Highest: 1,000 V
2.2 Accuracy
The Power Amp should be a No Calibration Required (NCR) artifact.
2.3 Connections
The Power Amp connector types should satisfy the following:
• Type N(f) connectors
• 3.5 mm connectors
• 2.4 mm connectors
| 1.0 Scope |
| 1.1 General |
| 1.2 Usage |
| 2.0 Requirements – Power Amp |
| 2.1 Specifications |
| 2.2 Accuracy |
| 2.3 Connections |
File details come from the government source that posted it. Updated .