Pocket Card.pdf

PDF 397 KB Posted

Attached to
License Printing
Solicitation number
SRC0000037422
Issued by
Mobile County, Alabama

About this file

This Scope of Work document outlines printing and distribution services for license pocket cards issued by the Alabama Board of Funeral Services. The Agency requires a qualified vendor capable of producing four distinct license pocket card types—Single License, Dual License, Tri License, and Preneed Sales Agent License—using Agency-provided designs and licensee information. Services include routine printing of newly issued licenses throughout the calendar year on an as-needed basis, as well as accommodating increased printing volumes during biennial license renewal periods. The Agency anticipates approximately 3,000 combined pocket cards during even-numbered renewal years for Single, Dual, and Tri license holders, and approximately 1,500 pocket cards during odd-numbered renewal years for Preneed Sales Agent licenses, with additional printing for replacement, corrected, and newly issued licenses occurring continuously. Routine printing requests must be processed within three business days of receiving complete information, while bulk renewal printing requests must be completed within ten business days. The procurement method is Annual Quick Quote, and the selected vendor must also provide mailing and distribution services, including preparation, packaging, postage application, and coordination with the State's designated mailing facility.

Pricing shall be submitted as itemized quotes identifying the per-card cost for each of the four license types, replacement or corrected cards, mailing preparation and packaging, postage, local delivery options if available, and initial setup and proofing fees as applicable. The Agency will be invoiced based on actual services requested and performed, with no guaranteed minimum quantities specified. The vendor must maintain appropriate safeguards to protect licensee information, provide quality assurance procedures to ensure accurate and consistent printing, and correct any vendor-caused errors at no additional expense to the Agency. The document does not specify a set-aside, incumbent vendor, funding source, or contract term duration. All services must comply with State of Alabama laws, regulations, and procurement procedures.

View the file

Other files

File Type Posted
DOPQQBPV4.08.26.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

ALABAMA

KAY IVEY

GOVERNOR

4276 LOMAC STREET | MONTGOMERY, ALABAMA 36106

P.O. BOX 309522 | MONTGOMERY, ALABAMA 36130

PHONE 334.242.4049 | WWW.FSB.ALABAMA.GOV

EMAILS

FUNERAL DIVISION: INFO@FSB.ALABAMA.GOV

PRENEED DIVISION: PRENEED@FSB.ALABAMA.GOV

CHARLES PERINE

DIRECTOR

SCOPE OF WORK

License Pocket Card Printing and Distribution Services

Requesting Agency:

Alabama Board of Funeral Services

4276 Lomac Street

Montgomery, Alabama 36106

Contact Information

For questions, requests for license pocket card designs, clarification of specifications, or any other concerns regarding this Scope of Work, please contact:

Courtney D. Smith Email: courtney.smith1@fsb.alabama.gov

Phone: 334-781-0777

Service Description: Printing, Processing, and Distribution of License Pocket Cards

Procurement Method: Annual Quick Quote

1. PURPOSE

The purpose of this Scope of Work is to obtain printing and distribution services for license pocket cards issued by the Agency.

The Agency requires a qualified vendor capable of printing license pocket cards for newly issued licenses throughout the year, as well as accommodating increased printing volumes during designated biennial license renewal periods.

The Agency has existing approved designs for all license pocket cards. The selected vendor shall utilize these designs to produce accurate, professional-quality pocket cards containing the applicable licensee information.

The Agency seeks dependable, cost-effective printing and distribution services that provide flexibility in ordering quantities and ensure timely production and delivery of license pocket cards.

2. SCOPE OF SERVICES

The selected vendor shall furnish all labor, equipment, materials, supplies, and services necessary to print, process, and distribute license pocket cards as requested by the Agency.

The Agency issues four (4) Design types of license pocket cards:

1. Single License Pocket Card

2. Dual License Pocket Card

3. Tri License Pocket Card

4. Preneed Sales Agent License Pocket Card

The vendor shall be capable of producing all four license pocket card types using Agency-provided designs and licensee information. (This is still considered a single card, just 4 different designs.)

Services shall include routine printing of newly issued licenses, replacement or corrected pocket cards, and bulk printing during designated renewal periods.

BOARD OF FUNERAL SERVICES

http://www.fsb.alabama.gov/ mailto:INFO@FSB.ALABAMA.GOV mailto:PRENEED@FSB.ALABAMA.GOV mailto:courtney.smith1@fsb.alabama.gov

3. PRINTING SPECIFICATIONS

The Agency shall provide the vendor with approved designs and layouts for each license pocket card type.

The vendor shall reproduce the approved designs accurately and consistently.

Each card shall contain the applicable licensee information provided by the Agency, including the licensee's name, license number, license classification, expiration date, and other required information.

Card dimensions, materials, thickness, printing format, and finish shall conform to the specifications and approved samples provided by the Agency.

The vendor shall provide samples for Agency review and approval before initial production.

No changes to the approved designs or specifications shall be made without prior authorization from the

Agency.

4. ROUTINE LICENSE PRINTING

The Agency issues new licenses throughout the calendar year and requires printing services on an as-needed basis.

The vendor shall be capable of receiving individual printing requests or batches of requests submitted by the Agency.

Routine services may include:

• Newly issued license pocket cards.

• Replacement license pocket cards.

• Corrected license pocket cards.

• Other Agency-authorized printing requests.

The Agency shall provide the necessary licensee information and mailing addresses through an approved secure transmission method.

The vendor shall process routine printing requests within three (3) business days after receiving complete and approved information, unless otherwise agreed upon by the Agency.

Routine printing services shall remain available during designated license renewal periods.

5. BIENNIAL LICENSE RENEWAL PRINTING

The Agency conducts license renewals on alternating biennial schedules and requires a vendor capable of accommodating increased printing volumes during these periods.

5.1 Even-Numbered Years

During even-numbered calendar years, the Agency conducts renewals for Single, Dual, and Tri license holders.

The Agency anticipates approximately 3,000 license pocket cards will be needed during each even-numbered renewal period.

5.2 Odd-Numbered Years

During odd-numbered calendar years, the Agency conducts renewals for Preneed Sales Agent license holders.

The Agency anticipates approximately 1,500 license pocket cards will be needed during each odd-numbered renewal period.

5.3 Renewal Processing Requirements

The vendor shall coordinate with the Agency to establish a printing and distribution schedule before each renewal period.

The vendor shall be capable of receiving renewal information in batches as license renewals are approved.

The vendor shall maintain sufficient production capacity to accommodate renewal printing while continuing routine printing services.

Bulk renewal printing requests shall be completed within ten (10) business days after receipt of complete and approved information, unless an alternative schedule is approved by the Agency.

6. ESTIMATED PRINTING QUANTITIES

The Agency anticipates the following printing needs:

License Category Printing Frequency Estimated Quantity

Single, Dual, and Tri Licenses Even-numbered renewal years Approximately 3,000 combined

Preneed Sales Agent Licenses Odd-numbered renewal years Approximately 1,500

Newly Issued Licenses Throughout the year As needed

Replacement and Corrected Licenses Throughout the year As needed

These quantities are estimates only and may increase or decrease depending on licensing activity and renewal participation.

The Agency does not guarantee a minimum quantity of pocket cards.

The vendor shall be compensated based on the actual number of cards produced and services performed under the applicable purchase authorization.

7. MAILING AND DISTRIBUTION SERVICES

The vendor shall provide mailing and distribution services for completed license pocket cards as requested by the Agency.

Services shall include:

1. Preparing completed pocket cards for mailing, pickup, or delivery.

2. Providing appropriate mailing envelopes and packaging materials when applicable.

3. Accurately matching pocket cards with the appropriate licensee information and mailing address.

4. Applying postage and mailing completed cards directly to licensees when requested.

5. Maintaining records of cards printed, mailed, delivered, or picked up.

6. Providing confirmation of mailing or distribution upon request.

7. Reporting returned or undeliverable mail to the Agency.

Printing and production of professional license certificates and wallet-sized pocket cards, including all associated materials, labor, sorting, packaging, and preparation for mailing. The vendor shall sort, organize, and prepare all completed materials in accordance with the State's mailing requirements and deliver the prepared materials to the designated State mailing facility for final processing and distribution.

All outgoing mail will be processed and mailed through the State of Alabama's designated mailing agency. The vendor will not be responsible for postage or direct mailing to license holders.

Local Vendor Pickup or Delivery Options

If the selected vendor is located within a reasonable distance of the Agency, the Agency and vendor may coordinate alternative distribution arrangements, including Agency pickup of completed pocket cards or vendor delivery to the Agency's office.

Pickup or delivery arrangements shall be mutually agreed upon and approved by the Agency.

These options may be utilized for routine printing requests, bulk renewal orders, or other authorized services.

Local pickup or delivery shall be optional and shall not be a requirement for vendor selection.

All completed pocket cards shall be properly packaged and protected from damage during mailing, pickup, or delivery.

8. DATA SECURITY AND CONFIDENTIALITY

The Agency shall provide the vendor with the information necessary to produce license pocket cards.

The vendor shall maintain appropriate safeguards to protect licensee information and prevent unauthorized access, disclosure, or use.

Licensee information shall be used solely for the purpose of performing authorized printing and distribution services.

The vendor shall promptly notify the Agency of any suspected or confirmed unauthorized access to Agency information.

Agency-provided designs and licensee information shall remain the property of the Agency.

9. QUALITY ASSURANCE

The vendor shall maintain quality control procedures to ensure accurate and consistent printing of all license pocket cards.

Each card shall be printed using the correct Agency-approved design and licensee information.

The vendor shall be responsible for correcting printing, processing, or distribution errors attributable to the vendor.

Any pocket card requiring replacement due to vendor error shall be reprinted and redistributed at no additional expense to the Agency.

10. VENDOR RESPONSIBILITIES

The selected vendor shall:

1. Provide the equipment, labor, materials, and supplies necessary to perform printing services.

2. Produce all four license pocket card types using Agency-approved designs.

3. Process routine printing requests throughout the year.

4. Accommodate increased printing quantities during renewal periods.

5. Provide mailing, pickup, or delivery services as authorized by the Agency.

6. Meet established production and distribution timelines.

7. Maintain the confidentiality and security of licensee information.

8. Correct vendor-caused errors at no additional expense.

9. Provide accurate invoices and supporting documentation.

10. Maintain communication with the Agency regarding printing requests and production schedules.

11. AGENCY RESPONSIBILITIES

The Agency shall:

1. Provide approved license pocket card designs.

2. Provide the necessary licensee information.

3. Identify the appropriate card type for each printing request.

4. Provide mailing addresses when cards are to be mailed directly to licensees.

5. Submit printing requests as needed.

6. Review and approve initial printing samples.

7. Coordinate renewal printing schedules.

8. Review invoices for accuracy.

The Agency shall retain responsibility for all licensing decisions, approvals, and renewals

12. PRICING AND PAYMENT

The vendor shall provide itemized pricing for printing and distribution services as part of the applicable

Quick Quote response.

Pricing shall identify the cost of producing each license pocket card type and any additional costs associated with mailing, packaging, delivery, or other requested services.

Item Service Description Unit of Measure

1 Single License Pocket Card Per card

2 Dual License Pocket Card Per card

3 Tri License Pocket Card Per card

4 Preneed Sales Agent License Pocket Card Per card

5 Replacement or Corrected Pocket Card Per card

6 Mailing Preparation and Packaging Per card

7 Postage Per mailed card

8 Local Delivery, if available Per delivery

9 Initial Setup and Proofing, if applicable One-time fee

The Agency shall be invoiced based on actual services requested and performed under the applicable purchase order or other approved purchasing document.

All charges shall be consistent with the accepted quotation and supported by appropriate documentation.

No services shall be performed without the required Agency authorization.

13. SERVICE REQUIREMENTS AND PERFORMANCE STANDARDS

The vendor shall provide timely, accurate, and professional printing and distribution services.

Service Proposed Requirement

Routine license printing Within 3 business days

Bulk renewal printing Within 10 business days

Initial printing samples Agency approval required

Mailing and distribution As authorized by the Agency

Vendor-caused errors Corrected at no additional charge

Licensee information Maintained securely and confidentially

The Agency may monitor vendor performance and request corrective action when services do not meet established requirements.

14. GENERAL CONDITIONS

All services shall be performed in accordance with the Agency's specifications, applicable procurement requirements, and State of Alabama laws and regulations.

The vendor shall not modify approved designs or substitute materials without prior Agency approval.

The Agency reserves the right to inspect printing samples and verify the accuracy and quality of completed pocket cards.

The vendor shall coordinate with the Agency to ensure timely printing and distribution of license pocket cards during the applicable service period.

This Scope of Work may be used to obtain quotations for printing and distribution services as needed, subject to applicable State of Alabama procurement procedures and purchasing requirements.

END OF SCOPE OF WORK

File details come from the government source that posted it. Updated .