PNF_Trail_Dozer_Specs_2025_0602.pdf
PDF 141 KB Posted
- Attached to
- Sources Sought for Trail Dozer Federal contract opportunity
- Solicitation number
- 1240LP26Q0092
- Issued by
- Department of Agriculture Forest Service
About this file
This is a purchase specification document for the Plumas National Forest's acquisition of one OHV Trail Dozer equipment unit, funded through the Plumas NF Camp Fire Settlement. The requisition is managed by the U.S. Forest Service (USDA) through Steven Dahlgren (steven.dahlgren@usda.gov), with AAP # 703142 and Requisition # 1153187. The jobcode is 0511 RIFCMP23 BOC-3110.
The Trail Dozer must be a compact tractor-type machine specifically engineered for forest trail construction and maintenance, weighing less than 10,000 lbs to permit transport with a standard California Driver License. The equipment requires a Tier 4 turbocharged diesel engine (74 HP at 2,000 RPM) compliant with EPA and CARB emissions standards, with a 12-volt dry cell battery rated for 800 cold cranking amps. Physical dimensions are constrained for forest maneuverability: maximum width 48 inches, length 158 inches, height 82 inches, with minimum 8 inches ground clearance. The dozer must feature a 6-way blade with lift and tilt capabilities (24-inch minimum lift/drop, 30-degree angle, 25-degree tilt), three-shank rippers capable of breaking compacted soil to 18-inch depth, and a 9-inch sheep foot roller for trail compaction. Additional required components include cable-drive steering with dual controls, 15-20 gpm hydraulics at 2,200 PSI with triple filtration, 12,000-pound winch, auxiliary lights (front and rear), ROPS/FOPS safety compliance meeting ISO 3471:2008 and ISO 3449:2005 Level II standards, and California Title 8 Section 1596 compliance.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sources Sought - Trail Dozer.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Plumas NF Trail Equipment Purchase (Trail Dozer) 06/02/2025
Purchase OHV Trail Dozer (11 - CON - Trail Dozer) Number 1 Jobcode 0511 RIFCMP23 BOC-3110 Funding Source Plumas NF Camp Fire Settlement Contact Steven Dahlgren, steven.dahlgren@usda.gov
AAP # 703142
Requisition # 1153187 Comments/Notes
Specifications
Item Minimum Specs From COR Salient Characteristics Type Tractor Trail Dozer with 6-way blade and 3 tine rippers 6-way blade capable of constructing grade reversal dips, out/in sloped tread grading, pushing of soil for fill, inside ditch construction and clean out, pushing of rocks and debris. Three tine rippers capable of ripping hardpacked compacted soil to depth of 18 inches.
Engine Type Tier 4 Turbocharged Diesel Diesel engine meeting current Tier 4 diesel EPA emission requirements and CARB emission requirements.
Displacement 74 HP 2,000 RPM Cooling Liquid Starting Electric start Battery 12-volt, Dry Cell Battery with cold start Minimum 800 Cold Cranking Amps producing 800 amps for 30 seconds at 0-degree Fahrenheit for repeated cold weather sub-freezing equipment starts
Frame ½ inch high tensile steel, unitized with full belly pan, hardened steel pins and bushings, rock guards
½ inch high tensile steel, unitized with full belly pan, hardened steel pins and bushings, rock guards for adequate protection of key dozer components.
Vehicle Width 48 inches Maximum dozer width of 48 inches capable of operation on trails with a maximum width of 50 inches
Vehicle Length 157 inches with blade and rippers Maximum dozer length of 158 inches including all components (blade/rippers/sheep foot roller) for operation and maneuverability in forest setting with trees, rocks, debris limiting operational space.
Vehicle Height 82 inches Maximum dozer height of 82 inches for operation and maneuverability in forest setting with height restrictions due to trees, rocks, and debris limiting overhead operational clearance space.
Ground Clearance 8 inches or more Minimum of 8 inches of ground clearance for operation and maneuverability in forest setting with uneven terrain and natural obstacles protruding in both trail tread and natural surface.
Gross Vehicle Weight 9,000 lbs. (approximate) with blade and rippers Less than 10,000 lbs. with blade and rippers enabling transport with a California Driver License (CDL) Class C license.
Steering Cable drive, dual controls, full hydrostatic, 100,000-inch pound hubs
Cable drive required for increased reliability and faster reaction time for track movement, steering, and operation of equipment.
Hydraulics 15-20 gpm, 2200 PSI, triple filtration, 10 microns Blade Type 6 Way Blade with Lift & Tilt Float, Hydrostatic Blade Lift 24 inch minimum Blade Drop 24 inch minimum Blade Angle 30 degrees minimum Blade Tilt 25 degrees minimum Blade Float Yes Tracks Steel Rippers 3 shank Seatbelt Yes Gauges Tachometer, hour meter, warning lights, Fuel, hydraulic
Oil
Auxiliary Hydraulics Yes Side Brush Screens Yes Hydraulic Oil Cooler Yes Rock Guards Yes Safety Brake Yes Lim Risers Yes Draw Bar Yes Spark Arrester Yes Winch Yes, 12,000 lb. winch with covers, hose fittings, flat face, cable
Sheep Foot Roller Yes, 9-inch roller Mounted on ripper bar, 48-inch wide by 9-inch diameter for enhanced shaping and compaction of trail tread.
Auxiliary Lights Yes, 2 front 2 rear Lights mounted front and rear of equipment for enhanced visibly by both operator, trail employees, and others in area
ROPS Yes Meet ROPS – ISO 3471: 2008 FOPS Yes Meet FOPS – ISO 3449: 2005 Level II ROPS/FOPS California Compliant Meet California Code of Regulations, Title 8, Section 1596
File details come from the government source that posted it. Updated .