pneumatic water table plasma cutter - Salient Characteristics.docx
DOCX document 25 KB Posted
- Solicitation number
- W912KC26Q1BX7
About this file
This document is a Salient Characteristics specification for a pneumatic water table plasma cutting system. The Department of the Army Pennsylvania Army National Guard is procuring one unit of a 5'x10' CNC pneumatic water table plasma cutter with delivery to SFC Ian Donley at the Combined Support Maintenance Shop East, Building 10-102, Fort Indiantown Gap, Annville, Pennsylvania 17003. The system must meet specific technical requirements including an effective cutting width of 5 feet and cutting length of 10 feet 6 inches, dual side rack and pinion servo motor drive system for X and Y axis movement, lead screw Z axis, and linear guide rails with a minimum gantry clearance of 9 inches. Positioning accuracy must be ±0.007 or better, and the system must include a controller swing arm, drain valve, removable slag tray, and parts catcher tray.
The specified plasma torch is a Hypertherm Powermax 105 or equivalent system compatible with the cutting platform. The procurement is being conducted under Solicitation Number W912KC26Q1BX7 through the UNISON marketplace (Buy #1209464). The vendor's bid must include customer site installation and training as part of the delivery. Additional details regarding response dates, pricing, and award terms are available through the referenced UNISON Global marketplace link.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PLASMA CUTTING SYSTEM
Salient Characteristics:
QTY 1 EA
Delivery to:
SFC Ian Donley, Combined Support Maintenance Shop East, Bldg. 10-102 Ft. Indiantown Gap, Annville, Pennsylvania 17003.
Phone: 717-861-8823
1. Must be a 5’x10’ cnc pneumatic water table
2. Must have an effective cutting width of 5 ft
3. Must have an effective cutting length 10ft 6 in.
4. Must have a Controller Swing Arm
5. Must have Dual Side Rack and Pinion Servo Motor Drive System (X,Y)
6. Must have Lead screw Z Axis
7. Must have linear guide rails
8. Must have a Gantry Clearance: 9 inches minimum
9. Must have Positioning Accuracy: (+/-) .007 or better
10. Must have a Drain Valve
11. Must have a Removable slag tray
12. Must have a parts catcher tray
13. Hypertherm powermax 105 plasma torch or equivalent ( must be compatible with plasma cutting system)
14. Must come with customer site installation and training
File details come from the government source that posted it. Updated .