PKGRQMT_REPORT.pdf
PDF 71 KB Posted
- Attached to
- F-16 Circuit Card Assembly 3-Year IDIQ
- Solicitation number
- FD20202600262
About this file
This is a Packaging Requirements document (AFMC Form 158) for Purchase Instrument Number FD20202600262-00, Version 1, generated on December 19, 2025.
The document specifies packaging and marking standards for two line items under this federal contract. All wood packaging material (WPM), including pallets, skids, boxes, crates, and dunnage, must comply with United Nations restrictions on invasive species by using debarked wood that is heat-treated to 56 degrees Centigrade (133 degrees Fahrenheit) for 30 minutes, with certification from an accredited agency recognized by the American Lumber Standards Committee (ALSC). Item 5998DTG260139WF requires no packaging data, while item 5998016295711WF requires MIL Long Line Packaging at Preservation Level MIL and Packaging Level B, with specific dimensions (4.50 x 12.5 x 8.3 x 4.0 inches, 0.240 cubic units) and ESD protection (per specification F000009XC6). All items must be packaged in accordance with MIL-STD-2073-1 (Standard Practice for Military Packaging) and marked per MIL-STD-129, Revision R (Standard Practice for Military Marking). Shipping container marking must include unit serial numbers, original equipment manufacturer names, or OEM model numbers as specified on the AFMC Form 158. The packaging specialist responsible for these requirements is Stephine A Lucero (406 SCMS/GULAA, 801-775-4142), with the document signed on December 11, 2025.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| TRNSPDATA_REPORT.pdf | ||
| MQR.pdf | ||
| SOW packages.pdf | ||
| ITMDESC_REPORT.pdf | ||
| CDRL Counterfit Prevention Plan.pdf | ||
| Pre-Sol Notice 5711 FA821226Q0004.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PACKAGING REQUIREMENTS
PURCHASE INSTRUMENT NUMBER: FD20202600262-00 VERSION: 1
MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN
PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAA No Packaging Data Required
ITEM(S):
5998DTG260139WF
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
VENDOR PACKAGING INSTRUCTIONS:
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAB MIL Long Line Packaging MIL B
ITEM(S):
5998016295711WF
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
1 000 GX 1 00 K3 NB A NS ns B 39 4.50 12.5 8.3 4.0 0.240 M
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
<35> F000009XC6 ESD PROTECTION REQUIRED
VENDOR PACKAGING INSTRUCTIONS:
Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.
Page 1 of 2AFMC 158 Version 1Generated by PRPS using Jasper Reports on 19 Dec 2025
PACKAGING REQUIREMENTS
Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.
ORGANIZATION / OFFICE SYMBOL:
406 SCMS / GULAA
PACKAGING SPECIALIST:
Lucero, Stephine A
PHONE NUMBER:
801-775-4142 / 775-4142
SIGNATURE:
//SIGNED//Lucero, Stephine A
DATE:
25345 - 11 DEC 2025
Page 2 of 2AFMC 158 Version 1Generated by PRPS using Jasper Reports on 19 Dec 2025
File details come from the government source that posted it. Updated .