PIPE_AND_CATCH_BASIN_COMPONENTS.pdf

INVITATION TO BID

25/26-57

PIPE AND CATCH BASIN COMPONENTS

Town of Manchester

Lincoln Center

Manchester, CT 06040

RELEASE DATE: April 9, 2026

DEADLINE FOR QUESTIONS: April 16, 2026

RESPONSE DEADLINE: April 24, 2026, 11:00 am

RESPONSES MUST BE SUBMITTED ELECTRONICALLY TO:

https://secure.procurenow.com/portal/townofmanchester https://secure.procurenow.com/portal/%7bproject.government.code%7d

Town of Manchester

INVITATION TO BID

25/26-57

PIPE AND CATCH BASIN COMPONENTS

I. Introduction II. Instructions to Bidders

III. Standard Instructions for Supplies, Materials & Equipment IV. Project Details V. Vendor Submissions

VI. Pricing Table

Attachments:

B - Blank IRS Form W-9 Fillable Form

Invitation To Bid #25/26-57 Title: PIPE AND CATCH BASIN COMPONENTS

1. Introduction

1.1. Summary

The Town is soliciting bids for the purchase of Pipe and Catch Basin Components.

1.2. Contact Information

Cora Narracci

Purchasing Agent

494 Main Street

Purchasing Division

Manchester, CT 06040

Email: cnarracci@manchesterct.gov

Phone: (860) 647-3033

Department:

Public Works

Department Head:

Mark Rizzo

Acting Director

1.3. Timeline

Release Project Date April 9, 2026

Question Submission Deadline April 16, 2026, 4:00pm

Bid Opening Date and Time April 24, 2026, 11:00am

Join Zoom Meeting https://us06web.zoom.us/j/87628038198?pwd=A2

XaQwO8e2hcFLFUhhlINrUYTFX2jy.1

Meeting ID: 876 2803 8198

Passcode: 1ScJr4

One tap mobile

+13017158592,,87628038198#,,,,*731200# US

(Washington DC)

+13052241968,,87628038198#,,,,*731200# US

Join instructions https://us06web.zoom.us/meetings/87628038198

/invitations?signature=PRaBHTLw7fpm0rdZitMKIO

RDRWabMhqvyXteDFPuLRY mailto:cnarracci@manchesterct.gov tel:(860)647-3033 https://us06web.zoom.us/j/87628038198?pwd=A2XaQwO8e2hcFLFUhhlINrUYTFX2jy.1 https://us06web.zoom.us/j/87628038198?pwd=A2XaQwO8e2hcFLFUhhlINrUYTFX2jy.1 https://us06web.zoom.us/meetings/87628038198/invitations?signature=PRaBHTLw7fpm0rdZitMKIORDRWabMhqvyXteDFPuLRY https://us06web.zoom.us/meetings/87628038198/invitations?signature=PRaBHTLw7fpm0rdZitMKIORDRWabMhqvyXteDFPuLRY https://us06web.zoom.us/meetings/87628038198/invitations?signature=PRaBHTLw7fpm0rdZitMKIORDRWabMhqvyXteDFPuLRY

2. Instructions to Bidders

2.1. INSTRUCTIONS TO BIDDERS

In accordance with the provisions of the Town Charter, sealed proposals will be received not later than the date and time set forth above, for furnishing the commodities and/or services listed herein.

Proposals must be executed in accordance with and subject to instructions and specifications contained herein.

The Town of Manchester is an equal opportunity employer and requires an affirmative action policy for all of its Contractors and Vendors as a condition of doing business with the Town, as per Federal Order

11246. By submitting the Proposal for this bid, all vendors and contractors agree to this condition of doing business with the Town, and should the Town choose to audit their compliance, the vendor agrees to cooperate fully.

2.2. ELECTRONIC BIDDING INFORMATION

Important Instructions for Electronic Submittal

Specifications and bid forms must be obtained online at Town of Manchester Procurement Portal

(opengov.com). The exclusive means by which all prospective bidders may obtain bid packages, direct inquiries, request and receive addenda and supplemental information, and submit bids and proposals, shall be through the Town of Manchester’s OpenGov portal.

Bids may be received up to the deadline date and time listed in the solicitation documents, via the

Town’s e-Procurement Portal. The Town e-Procurement Portal Clock is the official clock for the determination of all deadline dates and times. Without exception, responses will not be accepted after the submission deadline regardless of any technical difficulties such as poor internet connections. The

Town of Manchester strongly recommends completing your response well ahead of the deadline.

Addenda Notification and Acknowledgement

Addenda Notification: Bidders are required to register for an account via the Town’s e-Procurement

Portal hosted by OpenGov. Once the bidder has completed registration, you will receive addenda notifications to your email by clicking “Follow” on this project. Ultimately, it is the sole responsibility of each bidder to periodically check the site for any addenda at Town of Manchester Procurement Portal

(opengov.com).

Submitting Questions and Receiving Responses

Bidders shall submit all inquiries regarding this bid via the Town’s e-Procurement Portal. Please note any deadline for submitting inquiries. All answers to inquiries will be posted on the Town’s e-Procurement

Portal. Bidders may also click “Follow” on this bid to receive an email notification when answers are posted. It is the responsibility of the bidder to check the website for answers to inquiries.

When applicable, state bids will be considered for this service.

The Purchasing Authority reserves the right to waive any informality or reject any and all bids. In addition to the bid specifications, all bids are subject to the terms, provisions and conditions of the https://procurement.opengov.com/portal/townofmanchester https://procurement.opengov.com/portal/townofmanchester https://procurement.opengov.com/portal/townofmanchester

Manchester Charter, Code of Ordinances, and Purchasing Guidelines. By bidding on the proposed purchase, the bidder agrees to such terms, provisions and conditions.

An Equal Opportunity/Affirmative Action Employer

2.3. RULES AND REGULATIONS FOR COMPETITIVE BIDDING

These rules and regulations have been adopted by the Board of Directors of the Town of Manchester pursuant to Section 5-22 of the Town Charter. They are standard for all competitive bidding proposals issued by the Town of Manchester, Connecticut for contracts of all types where labor, materials, and necessary equipment to complete work is to be furnished to the Town, where the Town is to purchase supplies, materials, and equipment, where the Town is to sell surplus materials and equipment, or where the Town is to sell real estate. These rules and regulations shall be binding upon all prospective bidders and the Town of Manchester.

2.4. GENERAL RULES

1. The Purchasing Authority may delete or modify any of the instructions to bidders for a particular proposal, indicating such change in the appropriate section of the proposal documents. The Purchasing

Authority may insert special instructions in any special contracts which are subject to competitive bidding.

2. The proposal is signed by the bidder with full knowledge of, and agreement with, the general specifications, conditions, and requirements of this bid. In addition to the bid specifications, all bids are subject to the terms, provisions and conditions of the Manchester Charter, Code of Ordinances, and

Purchasing Guidelines. By bidding on the proposed purchase or service, the bidder agrees to such terms, provisions, and conditions.

3. The Town has transitioned to electronic bidding. Vendors should submit solicitation responses electronically via the Town of Manchester Procurement Portal. Vendors will be asked to register and should do so prior to submitting bid documents.

4.This bid and any addenda will be issued on the Town of Manchester website bidding portal. It shall be the responsibility of the bidder to download this information. THE TOWN OF MANCHESTER WILL NOT

MAIL A SEPARATE HARD COPY OF ADDENDUM TO BIDDERS. Failure of any bidder to receive any such addendum or interpretation shall not relieve such bidder from any obligation under his bid as submitted. All addenda so issued shall become part of the Contract Documents.

5. Bid prices may not be withdrawn by bidder for 90 days after bid opening.

6. Proposals received later than the time and date specified will not be considered. Amendments to, or withdrawals of bids received later than the time and date set for bid opening will not be considered.

7. All bids shall be opened via a virtual meeting link posted and read aloud. All bids shall be tabulated and copies of said tabulation shall be posted on the website

8. All deliveries of commodities or services hereunder shall comply in every respect with all applicable laws of the Federal Government and/or the State of Connecticut.

9. Purchases made by the Town of Manchester are exempt from payment of Federal Excise Taxes and the Connecticut Sales Tax and such taxes must not be included in bid prices. Federal Excise Tax exemption certificates, if requested, will be furnished.

10. The Bidder, where applicable, shall insert/include the price per stated unit and extend a total price for each item. In the event there is a discrepancy between the unit price and the extension, the unit price will govern. The total cost shall be the sum of the extended prices.

11. Bidders shall, where applicable, submit terms for payment in spaces provided in the proposal form, showing the amount of cash discount which shall apply to bid prices when paid within the stated number of days in the proposal.

12. All inquiries shall be submitted within the time limitations specified in the bid documents and shall be requested via the online portal Q&A. All information given by the Town other than through the

OpenGov portal shall be informal and shall not be binding upon the Town nor shall it furnish a basis for legal action by any bidder or prospective bidder against the Town.

12A. The Town reserves the right to reject any and all bids, to waive technical defects and to make such awards including accepting a bid, although not the low bid, as it deems in its sole discretion to be in the best interest of the Town. The Town reserves the right to reject any bid if the bidder, any officer of the bidder, or any other company owned in whole or in part by any officer(s) of the bidder, is delinquent in the payment of any taxes or fees owed to the Town. The Town reserves the right to require a disclosure statement from the bidder listing the name(s) of all officers of the company.

12B. In the event the Town determines that a contractor is delinquent in any payment due the Town, then the Town may offset the delinquent amount due to the Town against the sums owed the contractor.

13. The Town of Manchester may make such investigation as deemed necessary to determine the ability of the bidder to discharge a contract. The bidder shall furnish the Town with all such information and data as may be required for that purpose. The Town reserves the right to reject any bid if the bidder fails to satisfactorily convince the Town that he is properly qualified by experience and facilities to carry out the obligations of the contract and to satisfactorily complete the work called for herein, or if the bid is conditional in nature.

14. Except where otherwise provided, a contract between the Town and a successful bidder shall consist of the Invitation to Bid, Specifications, Plans, Bid including Proposal form and these Rules and

Regulations. Acceptance by the Town may be by purchase order for the portion of the work awarded to a contractor.

15. All Invitations to Bid shall be publicly advertised in a newspaper having a general circulation within the Town of Manchester, Connecticut.

16. Bids shall be made available on the Town of Manchester Purchasing Web Site via the Bidding site.

17. Alternate bids shall not be accepted unless otherwise specified in the bid documents.

18. Any act or acts of misrepresentation or collusion shall be a basis for disqualification of any bid or bids submitted by such persons guilty of said misrepresentation of collusion. In the event that the Town enters into a contract with any bidder who is guilty of misrepresentation or collusion and such conduct is discovered after the execution of said contract, the Town may cancel said contract without incurring liability, penalty, or damages.

19. In the event that any bidder wishes to protest the potential award of a bid, the bidder must make it’s protest in writing identify the protesting party and the bid number, title and shall include a factual summary of the basis of the protest including any documents that shall be considered and request a conference with respect thereto. Said protest must be received in the Town of Manchester Purchasing

Office, within FIVE (5) business days after the award decision.

20. A conference with respect to said protest shall be scheduled by the Purchasing Authority and shall be attended by the Purchasing Authority or their designee and such other persons as the Purchasing

Division and the Town Manager shall require attend. The subject matter of said conference shall be limited to the reasons for the protest specified in the written request for said conference. Said conference shall also include a discussion of all possibilities for a resolution of dispute. The Town shall make a decision in writing within three (3) business days after said conference and notify protesting bidder.

21. In the event that any protesting bidder wishes to take legal action against the Town, they must first fully comply with all of these Rules and Regulations, including those which have been changed by the

Purchasing Authority pursuant to paragraph 1 herein.

22. Except for special instructions inserted in special contracts by the Purchasing Authority pursuant to paragraph 1 herein, in the event of any conflicts between these Rules and Regulations and the terms and conditions of any document these Rules and Regulations shall prevail.

23. The contractor shall not transfer, sublet, or assign the contract by Power of Attorney or otherwise to any person, firm, or corporation, or in any way vary the terms of the contract without written permission from the Town. The Town has the right to terminate with a thirty (30) day written notice to the contractor. The Town reserves the right to terminate the contract at any time during the contract period. Such termination shall be effective immediately after giving written notice to the contractor that the Town is terminating the contract.

24. All Awards shall be made by the Purchasing Authority.

25. The Town reserves the right to purchase additional items as listed in this invitation to bid, at the price herein bid, for a period of up to one (1) year from date of award.

26. Tariff Increases:

The prices set forth in this bid shall be firm and not subject to increase due to any new or increased tariffs, duties, or trade restrictions imposed after the bid submission date, whether by domestic or foreign authorities. The Seller assumes all risk and liability for any such increases and shall not pass on any additional costs to the Buyer unless agreed to in writing in advance.

Should the Seller seek an adjustment due to a material tariff change, the Seller must notify the Buyer in writing within ten (10) business days of the change, providing detailed documentation of the impact.

The Buyer reserves the right to reject any proposed price adjustment or to seek alternative suppliers if an acceptable resolution is not reached.

27. The Town reserves the right to reject bids from companies that have on two or more occasions withdrawn their bids after bids have been opened.

2.5. Bid Opening Information

Bid responses will be received by 11:00 am on Friday, April 24, 2026

Bid openings will be held virtually through Zoom.

ZOOM meeting instructions are as identified in the Introduction Section above.

The virtual bid opening will be exactly the same as a regular bid opening – Purchasing staff will open the bids and read the results out loud. Results are not final until reviewed, tabulations compiled and then posted/distributed to participants. In addition, the requesting department will recommend an award after a complete review of the submissions.

3. Standard Instructions for Supplies, Materials & Equipment

These instructions are standard for all proposals issued by the Town of Manchester, Connecticut, for the purchase of all supplies, materials, and equipment. The Town of Manchester may delete, supersede, or modify any of these standard instructions for a proposal by indicating such change in the section headed

“Special Instructions to Bidders.”

1. Unless otherwise stated, deliveries must consist of new merchandise.

2. Prices quoted shall be net delivered prices to the Town.

3. The Town may withhold acceptance of, or reject any merchandise which found, upon examination, not to meet the specifications’ requirements. When rejected, it shall be removed by the Contractor

(vendor) within ten (10) days after notification of rejection.

4. When the schedule indicates that an item to be purchased is to be specified, or equal, the bidder may offer an article which is certified to be equal in quality, performance, and in other essential characteristics to the bid standard. Bidder must furnish any information, such as specifications, test results, etc., which will help in determining whether an item is equal or superior to the Town’s bid standard. If a bidder fails to name a substitute, the specified item must be furnished.

5. Bidders agree to comply with all of the latest Federal and State safety standards and regulations and certify that all items furnished in this bid will conform to and comply with said standards and regulations. Bidder further agrees to indemnify and hold harmless the Town for all damages assessed against the Town as a result of the bidder’s failure to comply with said Standards and/or Regulations.

6. The Town reserves the right to make an award by item, total or by group, as may be in the best interest of the Town. If a Bidder desires to bid on an “all or nothing” basis, he shall so indicate on the bid schedule and the Town reserves the right to make an award as may be in the best interest of the Town.

7. The Bidder shall pay all royalties and license fees. He shall defend all suits or claims for infringement of any patent rights and shall save the Town of Manchester harmless from loss on account thereof except that the Town of Manchester shall be responsible for all such loss when a particular manufacturer, product, or process is specified by the Town of Manchester.

4. Project Details

4.1. PROJECT DETAILS

Bid items will be ordered on an “AS NEEDED” basis. Bidders shall indicate trucking charge as a Flat Rate per delivery. All items ordered shall be delivered to the Town yard and unloaded by the driver.

Delivery location shall be Field Services at 321 Olcott Street in Manchester unless otherwise directed.

Quantities for all items are unknown.

4.2. MATERIALS

All references to “Form 816” shall mean the “Standard Specifications for Roads, Bridges and Incidental

Construction, Form 816” as amended, published by the State of Connecticut Department of

Transportation.

High Density Polyethylene (HDPE) pipe and HDPE Culvert Ends shall conform to Article M.08.01.25

“Corrugated Polyethylene Pipe” of Form 816 and shall be smooth interior surface without perforations.

Reinforced Concrete Pipe (RCP) shall conform to Article M.08.01.06 “Reinforced Concrete Pipe” of Form

816.

Reinforced Concrete Culvert Ends shall conform to Article M.08.01.22 “Reinforced Concrete Culvert

Ends” of Form 816.

Precast concrete catch basin components shall conform to Article M.08.02.04 “Precast Units for

Drainage Structures” of Form 816.

Masonry concrete units shall conform to Article M.08.02.03 “Masonry Concrete Units for Catch Basins, Manholes or Drop Inlets” of Form 816.

Concrete block shall conform to Article M.08.02.02 “Concrete Building Brick for Catch Basins, Manholes or Drop Inlets” of Form 816.

Clay bricks shall conform to Article M.08.02.01 “Brick for Catch Basins, Manholes or Drop Inlets” of Form

816.

Manhole frames and covers shall be galvanized steel Type “A” conforming to Article M.08.02 of Form

816.

Cast iron manhole risers shall be manufactured by Campbell Foundry or EJ Worldwide.

Ductile iron pipe (Items 133 to 135) shall meet the requirements of the latest revision of AWWA C151

(ANSI A21.51). Joint restraints are not required and all joints shall be rubber gasket push-on type manufactured in accordance with the latest revision of AWWA C111 (ANSI A21.11). Pipe shall be supplied with the standard exterior bituminous coating of either coal tar or asphalt base approximately one mil thick. The interior shall be double cement lined in accordance with the latest revision of AWWA

C104 (ANSI A21.4), and pipe shall be of thickness Class 52 unless otherwise indicated. Pipe shall be manufactured by American Pipe, Griffin, U.S. Pipe, McWane Ductile or approved equal.

Sedimentation Control Fence (Item No. 139) shall consist of a prefabricated geotextile fence with overall height of 40”. Hardwood posts shall have a minimum cross-section of at least 1.5 inches by 1.5 inches and a minimum length of 30 inches. Spacing between posts shall not exceed ten feet (10’). Geotextile shall conform to Article M.08.01.19 of the Standard Specifications for Roads, Bridges, Facilities and

Incidental Construction Form 817 (2016) as published by the State of Connecticut Department of

Transportation.

Manhole frame and covers shall conform to Article M.08.02 of the Standard Specifications for Roads, Bridges, Facilities and Incidental Construction Form 817 (2016) as published by the State of Connecticut

Department of Transportation.

Erosion control blanket (Item No. 138) shall be a machine produced mat consisting of 100% coconut fiber. The blanket shall be of consistent thickness with the coconut fiber evenly distributed over the entire area of the mat. The blanket shall be covered on the top side with heavyweight photodegradable polypropylene netting having ultraviolet additives to delay breakdown and an approximate 5/8 inch x

5/8 inch mesh, and on the bottom side with a lightweight photodegradable polypropylene netting with an approximate ½ inch x ½ inch mesh. The blanket shall be sewn together on 1 ½ inch centers with degradable thread.

4.3. CONTRACT TERM

The contract term shall be from Date of Award up to and including July 31, 2027.

Prices must remain firm for the entire contract term.

The contractor shall not transfer, sublet, or assign the contract by Power of Attorney or otherwise to any person, firm, or corporation, or in any way vary the terms of the contract without written permission from the Town. The Town has the right to terminate with a thirty (30) day written notice to the contractor. The Town reserves the right to terminate the contract at any time during the contract period. Such termination shall be effective immediately after giving written notice to the contractor that the Town is terminating the contract.

5. Vendor Submissions

5.1. Bid Requirements*

Did you read through the entire solicitation and confirm that you met all of the bid requirements therein?

☐ Yes

☐ No

*Response required

5.2. Addenda *

This bid and any addenda will be issued on the Town of Manchester website bidding portal. It shall be the responsibility of the bidder to download this information. THE TOWN OF MANCHESTER WILL NOT

MAIL A SEPARATE HARD COPY OF ADDENDUM TO BIDDERS. Failure of any bidder to receive any such addendum or interpretation shall not relieve such bidder from any obligation under his bid as submitted. All addenda so issued shall become part of the Contract Documents.

☐ Please confirm

*Response required

5.3. Document Uploads

Please upload any required information in this section.

5.4. Vendor Information *

Please provide your Company Name

Your Company Address

Your Company's FEIN Number

Your Company's System Award Management Number (SAM)

Your Company's State Contractor License Number (if applicable)

Main Contact Name and Title

Telephone Number

Email Address

*Response required

5.5. IRS Form W-9 Request for Taxpayer Indentification Number and Certification. Please provide a current Form W-9. You may also use the fillable Form W-9 attached here.*

Please download the document below, complete, sign and upload.

In order to collect your official tax identity, a current Form W-9, Request for Taxpayer Identification Number and

Certification, is required before engaging in any business with the Town of Manchester.

Please ensure that you have completed all necessary fields on the form, specifically Part I, Taxpayer Identification

Number (TIN) and Part II, Certification.

Payments to the vendor may be delayed if Form W-9 is not received.

Please download Form W-9 from the IRS website or use the fillable form below.

Complete, sign and include it with your submission.

Instructions for the Requester of Form W-9 https://www.irs.gov/pub/irs-pdf/iw9.pdf

Form W-9 https://www.irs.gov/pub/irs-pdf/fw9.pdf

Complete, sign and upload.

• BLANK_IRS_FORM_W-9_FILLABLE...

*Response required

5.6. Please provide the full name of the person who is authorized to sign contracts on behalf of the company in the event that your company is the successful bidder.*

*Response required

5.7. Please provide the email address of the person who is authorized to sign contracts on behalf of the company in the event that your company is the successful bidder.*

*Response required https://www.irs.gov/pub/irs-pdf/iw9.pdf https://www.irs.gov/pub/irs-pdf/fw9.pdf https://government-project.s3.us-west-2.amazonaws.com/22918/460357c1-a35f-41bd-9745-136311068517_BLANK_IRS_FORM_W-9_FILLABLE_FORM.pdf

6. Pricing Table

HIGH DENSITY POLYETHYLENE PIPE

H.D.P.E PIPE

Line Item Description Unit of Measure Unit Cost No Bid

1 8" LF

2 10" LF

3 12" LF

4 15" LF

5 18" LF

6 24" LF

REINFORCED CONCRETE PIPE

R.C.P

Line Item Description Unit of Measure Unit Cost No Bid

7 12" LF

8 15" LF

9 18" LF

10 24" LF

REINFORCED CONCRETE PIPE (CLASS V)

R.C.P (CLASS V)

Line Item Description Unit of Measure Unit Cost No Bid

11 12" LF

12 15" LF

Line Item Description Unit of Measure Unit Cost No Bid

13 18" LF

14 24" LF

SDR35 PVC PIPE

15 6" LF

16 8" LF

17 10" LF

18 12" LF

19 15" LF

20 18" LF

21 21" LF

22 24" LF

CORRUGATED POLYETHYLENE CULVERT END

23 12" EACH

24 15' EACH

25 18" EACH

26 24" EACH

REINFORCED CONCRETE CULVERT END

27 12" EACH

28 15" EACH

29 18" EACH

30 24" EACH

BASE SLAB

31 6" FOR SINGLE CB EACH

32 6" FOR TYPE 1 CB EACH

33 6" FOR TYPE II CB EACH

SUMP

34 12" FOR SINGLE CB EACH

35 18" FOR SINGLE CB EACH

36 24" FOR SINGLE CB EACH

37 24" FOR TYPE 1 CB EACH

38 24" FOR TYPE II CB EACH

RISER

39 6" FOR SINGLE CB EACH

40 6" FOR TYPE 1 DOUBLE CB EACH

41 6" FOR TYPE II DOUBLE CB EACH

42 8" FOR SINGLE CB EACH

43 8" FOR TYPE 1 DOUBLE CB EACH

44 8" FOR TYPE II DOUBLE CB EACH

45 12" FOR SINGLE CB EACH

46 12" FOR TYPE 1 CB EACH

47 12" FOR TYPE II CB EACH

48 24" FOR SINGLE CB EACH

49 24" FOR TYPE 1 CB EACH

50 24" FOR TYPE II CB EACH

51 36" FOR SINGLE CB EACH

52 36" FOR TYPE 1 CB EACH

53 36" FOR TYPE II CB EACH

54 48" FOR SINGLE CB EACH

55 48" FOR TYPE 1 CB EACH

56 48" FOR TYPE II CB EACH

ADAPTER

57 12" FOR TYPE "C" SINGLE CB EACH

58 12" FOR TYPE "C-L" SINGLE CB EACH

59 12" FOR TYPE “C” DOUBLE TYPE I CB EACH

60 12” FOR TYPE “C-L” DOUBLE TYPE I CB EACH

61 12” FOR TYPE “C” DOUBLE TYPE II CB EACH

62 12” FOR TYPE “C-L” DOUBLE TYPE II

CB

EACH

SPACER

63 6” FOR TYPE “C” SINGLE CB EACH

64 6” FOR TYPE “C-L” SINGLE CB EACH

65 6” FOR TYPE “C” DOUBLE TYPE I CB EACH

66 6” FOR TYPE “C-L” DOUBLE TYPE I CB EACH

67 6” FOR TYPE “C” DOUBLE TYPE II CB EACH

68 6” FOR TYPE “C-L” DOUBLE TYPE II CB EACH

69 12” FOR TYPE “C” SINGLE CB EACH

70 12” FOR TYPE “C-L” SINGLE CB EACH

71 12” FOR TYPE “C” DOUBLE TYPE I CB EACH

72 12” FOR TYPE “C-L” DOUBLE TYPE I CB EACH

73 12” FOR TYPE “C” DOUBLE TYPE II CB EACH

74 12” FOR TYPE “C-L” DOUBLE TYPE II

CB

BITUMINOUS CURB TYPE

75 TYPE “C” CB TOP EACH

76 TYPE “C” CB TOP (LOW PROFILE) EACH

77 TYPE “C” DOUBLE TYPE I CB TOP EACH

78 TYPE “C” DOUBLE TYPE II CB TOP EACH

PARK CURB TYPE

79 TYPE “C” CB TOP EACH

80 TYPE “C” CB TOP (LOW PROFILE) EACH

81 TYPE “C” DOUBLE TYPE I CB TOP EACH

82 TYPE “C” DOUBLE TYPE II CB TOP EACH

CONCRETE CURB TYPE

83 TYPE “C” CB TOP EACH

84 TYPE “C” CB TOP (LOW PROFILE) EACH

85 TYPE “C” DOUBLE TYPE I CB TOP EACH

86 TYPE “C” DOUBLE TYPE II CB TOP EACH

BARRIER TYPE

87 TYPE “C” CB TOP EACH

88 TYPE “C” CB TOP (LOW PROFILE) EACH

89 TYPE “C” DOUBLE TYPE I CB TOP EACH

90 TYPE “C” DOUBLE TYPE II CB TOP EACH

91 TYPE “C-L” CB TOP EACH

92 TYPE “C-L” DOUBLE TYPE I CB TOP EACH

93 TYPE “C-L” DOUBLE TYPE II CB TOP EACH

CB TOP

94 TYPE “C-L” EACH

95 TYPE “C-L” (HEAVY DUTY) EACH

96 TYPE “C-L” DOUBLE TYPE I EACH

97 TYPE “C-L” DOUBLE TYPE II EACH

CONVERSION SLAB

98 6" SINGLE EACH

99 6" DOUBLE TYPE I EACH

100 6" DOUBLE TYPE II EACH

CATCH BASIN GRATE RISER

101 GALVANIZED EACH

MANHOLE BLOCK

Line Item Description Unit of

Measure Unit Cost Blocks Per

Palle No Bid

102 8”W X 6”H X 12” L EACH

SOLID BLOCKS

Measure Unit Cost Blocks Per

Pallet No Bid

103 4” X 8” X 16” EACH

104 6” X 8” X 12” EACH

105 6” X 8” X 16” EACH

106 8” X 16” X 1-3/4” EACH

HOLLOW BLOCKS

Measure Unit Cost No Bid Blocks Per

Pallet

107 6” X 8” X 8” GRADE N-II EACH

108 6” X 8” X 16” GRADE N-II EACH

109 8” X 8” X 16” GRADE N-II EACH

110 12” X 8” X 16” GRADE N-II EACH

111 8” X 8” X 16” GRADE S-II EACH

112 12” X 8” X 16” GRADE S-II EACH

CONCRETE PATIO BLOCK

113 2” X 8” X 12” EACH

BRICKS

114 CONCRETE BRICKS 3-5/8” X 2-1/4” X

7-5/8”

EACH

115 CLAY COMMON BRICKS 3-5/8” X 2-

1/4” X 7-5/8”

GALVANIZED FRAME AND GRATE

116 GALVANIZED FRAME AND GRATE EACH

CATCH BASIN GRATE

117 GALVANIZED EACH

118 PAINTED EACH

MANHOLE RAME AND COVER

119 HEAVY DUTY REGULAR 4” EACH

120 HEAVY DUTY REGULAR 6” EACH

121 HEAVY DUTY REGULAR 8” EACH

MANHOLE COVER ONLY

122 TO FIT HEAVY DUTY REGULAR 4”

FRAME

EACH

123 TO FIT HEAVY DUTY REGULAR 6”

FRAME

124 TO FIT HEAVY DUTY REGULAR 8”

FRAME

POLYPROPYLENE MANHOLE RISERS

125 24” X 1 ¼” X 5/8” EACH

126 24” X 1 ¼” X 1” EACH

127 24” X 1 ¼” X 1” EACH

128 24” X 1 ¼” X 2” EACH

MANHOLE RISERS (CAST IRON)

129 24” X 1-1/4” X 5/8” EACH

130 24” X 1-1/4” X 1” EACH

131 24” X 1-1/4” X 1-1/2” EACH

132 24” X 1-1/4” X 2” EACH

DUCTILE IRON PIPE, CLASS 52

133 12" LF

134 14" LF

135 16" LF

CONCRETE BLOCK, INTERLOCKING

136 2’ x 2’ x 6’ EACH

137 2’ x 3’ x 6’ EACH

EROSION CONTROL BLANKET

138 EROSION CONTROL BLANKET ROLL

SEDIMENTATION CONTROL FENCE

139 SEDIMENTATION CONTROL FENCE ROLL

BASIN KNOCK OUT RISERS

140 24" EACH

141 26" EACH

PERFORATED, SOCK WRAPPED PIPE

142 4” CORRUGATED, 100 LF COILS EACH

143 6” CORRUGATED, 100 LF COILS EACH

PALLETIZED MORTAR AND CEMENT MIX

144 TYPE 2 PORTLAND EACH

145 TYPE S EACH

146 TYPE N EACH

TRUCKIN CHARGE PER DELIVERY - FLAT RATE

147 TRUCKING CHARGE FLAT RATE