PID Packaging and Marking.docx

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:014715456

BARREL,CARBINE

REFERENCE NUMBER:RA001

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE

INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120-30) AND THE

ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799). ANY MANUFACTURER OR

EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE

DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD.

ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO

SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

_________________EXCEPTION DATA____________________

IF DRAWING NOTE GIVES OPTION FOR ZINC OR MANGANESE COATING THEN

MANGANESE IS REQUIRED.

PACKAGING TDPL: DOCUMENT DELETE ADD PD 12991851 REV A REV B CANCELLED

SPECIFICATION MIL-STD-120 SHALL BE USED FOR REFERENCE ONLY.

______________END OF EXCEPTIONS__________________

__________GOVERNMENT FURNISHED MATERIAL__________

100% OF ALL BARRELS SHALL UNDERGO DISPERSION AND TARGETING TEST. 10

ROUNDS MINIMUM OF M855A1 (1305-01-559-3333) AMMUNITON, 13 ROUNDS

MAXIMUM. DODIC AB57.

1 EA M197 HPT AMMUNITON IS REQUIRED PER BARREL. M197 HPT AMMUNITION IS

NOT AVAILABLE. CONTRACTOR IS REQUIRED TO USE COMMERCIAL EQUIVALENT

AMMUNITION PER DWG 12991850 NOTE 3.

______END OF GOVERNMENT FURNISHED MATERIAL________

___ GOVERNMENT FURNISHED TEST SUPPORT EQUIPMENT____

1 EA M4A1 CARBINE (NSN 1005-01-382-0953) TO TEST A MAXIMUM OF 8 BARRELS

FOR TARGET AND ACCURACY TESTING SHALL BE PROVIDED TO THE CONTRACTOR BY

THE PROCURING AGENCY. THE ACUTUAL NUMBER OF RIFLES REQUIRED FOR TESTING

WILL BE BASED ON CONTRACT QUANTITY.

__END OF GOVERNMENT FURNISHED TEST SUPPORT EQUIPMENT__

THE ITEM BEING PROCURED IS A CRITICAL GUN PART ITEM WITH UNIQUE

REQUIREMENTS.

CONTRACTOR FAT APPLIES.

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE CONTACTED TO PRICE THE FAT

REQUIREMENT.

PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS REQUIRED BY MILITARY

SPECIFICATION (S) APPLICABLE TO THIS CONTRACT WILL BE APPROVED BY THE

CONTRACT POST AWARD CONTRACTING OFFICER (PCO). PRODUCT INSPECTION WILL

BE CONDUCTED BY THE DCMA QAR AT THE ACTUAL MANUFACTURER'S FACILITY. THE

IDENTIFICATION OF THE ACTUAL MANUFACTURER AND PHOSPHATE CONTRACTOR MUST

BE SUBMITTED TO THE CONTRACTING OFFICER FOR INCLUSION IN THE AWARD. UPON

AWARD, ANY CHANGES TO THE ABOVE MUST BE APPROVED BY THE PCO VIA FORMAL

CONTRACT MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE WITH PROCUREMENT NOTE

E05, MAY BE INVOKED FOR THE REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES

MUST BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE CONTRACT. ONE

(1) SAMPLE MAY BE DESTROYED DURING TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED, WILL BE PERFORMED PRIOR TO

ACCEPTANCE OF EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE PVT SAMPLES

FROM EACH (SUB)CONTRACTOR USED IN THE PRODUCTION OF PARTS ON THIS

CONTRACT. FIVE (5) PVT SAMPLES, UNLESS OTHERWISE SPECIFIED, WILL BE

REQUIRED TO BE IDENTIFIED TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

THE ONLY APPROVED SOURCES FOR THIS ITEM ARE LISTED ON THE SOLICITATION.

ANY OTHER SOURCE WANTING TO BECOME A QUALIFIED SOURCE MUST SUBMIT A

SOURCE APPROVAL REQUEST TO DLA.

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZDL05

REFERENCE NUMBER:ZL006

REFERENCE NUMBER:ZD030

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:ES371

CRITICAL APPLICATION ITEM

COLT'S MANUFACTURING COMPANY LLC 13629 P/N 12991851

IAW REFERENCE DRAWING NR 19200 11837943

REVISION NR K DTD 08/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12972681

REVISION NR D DTD 12/14/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12991849

REVISION NR G DTD 01/29/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12991851

REVISION NR C DTD 02/01/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19205 7266299

REVISION NR T DTD 02/01/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19204 11837944

REVISION NR L DTD 11/19/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 8448510

REVISION NR AJ DTD 03/28/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19204 8448643

REVISION NR N DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9349056

REVISION NR L DTD 10/04/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9390002

REVISION NR D DTD 04/27/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9390030

REVISION NR H DTD 04/03/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 8448503

REVISION NR U DTD 09/04/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 8448551

REVISION NR G DTD 11/08/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 8448553

REVISION NR J DTD 05/24/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19204 8448574

REVISION NR H DTD 11/18/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19204 8448575

REVISION NR K DTD 08/13/2004

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-PRF-3420H NOT 1

REVISION NR 1 DTD 11/07/2019

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-16232H(1)

REVISION NR 1 DTD 03/26/2021

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-71186B

REVISION NR B DTD 04/30/2019

PART PIECE NUMBER:

IAW REFERENCE UNK DI-NDTI-80809B NOT 2

REVISION NR B DTD 12/11/2019

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-3150-34 NOT 1

REVISION NR 34 DTD 03/15/2007

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-16173-84 NOT 1

REVISION NR 84 DTD 10/29/2008

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-63460-32 NOT 1

REVISION NR 32 DTD 07/31/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19204 8448573

REVISION NR L DTD 11/08/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13011863

REVISION NR E DTD 07/19/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12991850

REVISION NR T DTD 03/28/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12991851

REVISION NR B DTD 10/10/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12991851

REVISION NR DTD 10/01/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 8448551

REVISION NR G DTD 11/08/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 8448553

REVISION NR J DTD 05/24/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 8448573

REVISION NR L DTD 11/08/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 8448574

REVISION NR H DTD 11/18/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 8448575

REVISION NR K DTD 08/13/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12972681

REVISION NR B DTD 12/21/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9349056

REVISION NR L DTD 10/04/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13041260

REVISION NR DTD 02/01/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19204 8448202

REVISION NR N DTD 01/09/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13011863

REVISION NR E DTD 07/19/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13045512

REVISION NR DTD 12/17/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13045513

REVISION NR B DTD 08/10/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047419

REVISION NR A DTD 03/03/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047420

REVISION NR A DTD 03/03/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047421

REVISION NR DTD 08/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047422

REVISION NR DTD 08/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047423

REVISION NR A DTD 03/03/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047424

REVISION NR A DTD 03/03/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047425

REVISION NR DTD 08/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047426

REVISION NR A DTD 03/03/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047427

REVISION NR DTD 08/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047428

REVISION NR DTD 08/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047429

REVISION NR A DTD 01/14/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047430

REVISION NR DTD 08/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047431

REVISION NR A DTD 03/03/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047432

REVISION NR DTD 08/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047433

REVISION NR A DTD 03/03/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047434

REVISION NR DTD 08/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13052445

REVISION NR DTD 11/19/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9390002

REVISION NR D DTD 09/04/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12991851

REVISION NR K DTD 03/28/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13020533

REVISION NR N DTD 08/24/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13047429

REVISION NR DTD 12/19/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12993884

REVISION NR K DTD 04/23/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9390030

REVISION NR H DTD 02/24/2021

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

Packaging shall be in accordance with Special Packaging Instruction - SPI - 12991851, Revision B, dated 10 October 2019.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RD001

RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES

(CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ001

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER RQ017

RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER ZDL05

A COLT INDUSTRIES LICENSE AGREEMENT 05 RESTRICTED TECHNICAL DATA PACKAGE

EXISTS FOR THIS ITEM. DATA NON-DISCLOSURE AND DATA DESTRUCTION

CONDITIONS APPLY. VENDORS MUST COMPLETE AND RETURN THE FORMS LOCATED IN

THE "05 COLT INDUSTRIES M4, M4A1, M16" LICENSE AGREEMENT FOLDER

AVAILABLE AT

https://pcf1x.bsm.dla.mi./cFolders

REFERENCE NUMBER ZL006

This item contains a phosphate coating requirement IAW MIL-STD-171, MIL-DTL-16232, and TT-C-490 Types I, II, and V. In lieu of the required submittal of a preproduction phosphate procedure the following is now required: The contractor responsible for the actual coating procedure must be certified by the Performance Review Institute (PRI) to the NADCAP standard for the phosphate chemical processes. Verification of this certification is required and must be supplied upon request of the Contracting Officer.

REFERENCE NUMBER ZD030

This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130.

DFARS 252.211-7003 clause applies.

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

REFERENCE NUMBER ES371

The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN.

(End of TQ Requirement)