PID Packaging and Marking.docx

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:010266361

REFERENCE NUMBER:RD003

SWITCH,PRESSURE

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS106

CRITICAL APPLICATION ITEM

CUSTOM CONTROL SENSORS, LLC 09049 P/N 42D300

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

NSN:011165267

REFERENCE NUMBER:RD003

SWITCH,PRESSURE:

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD025

DRAWING NUMBER: 109692 REVISION: L CAGE: 55820 PART NUMBER: 109692-1

REFERENCE NUMBER:C0201

REFERENCE NUMBER:ES120

REFERENCE NUMBER:E0117

REFERENCE NUMBER:ESC01

CRITICAL APPLICATION ITEM

CUSTOM CONTROL SENSORS, LLC 09049 P/N 611GH991S

IAW BASIC DRAWING NR 1X4F3 AMSCBDOC

REVISION NR DTD 03/07/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 55820 109692-1

REVISION NR DTD 10/28/2019

PART PIECE NUMBER:

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C

UNIT CONT:ZZ OPI:O

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

REFERENCE NUMBER:J5930

REFERENCE NUMBER:IP025

NSN:016076934

REFERENCE NUMBER:RD003

SWITCH,PRESSURE

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ES120

CRITICAL APPLICATION ITEM

CUSTOM CONTROL SENSORS, LLC 09049 P/N 7G1180

IAW BASIC DRAWING NR 82918 520-10720

REVISION NR H DTD 02/02/2012

PART PIECE NUMBER:

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C

UNIT CONT:D3 OPI:M

INTRMDTE CONT:DO INTRMDTE CONT QTY:024

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER:IP025

NSN:016120788

REFERENCE NUMBER:RD003

SWITCH,PRESSURE

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ES120

CRITICAL APPLICATION ITEM

CUSTOM CONTROL SENSORS, LLC 09049 P/N S7G1179

IAW BASIC DRAWING NR 82918 520-10720

REVISION NR H DTD 02/02/2012

PART PIECE NUMBER: 520-10720-1

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RD003

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER CS106

THE CONTROLLING REFERENCE NUMBER FOR SUBJECT

NSN IS A VENDOR ITEM CONTROL DRAWING (VID)

WHICH WAS FORMERLY KNOWN AS A SPECIFICATION

CONTROL DRAWING. THE AMSC IS A C BECAUSE THE

THE SERVICE RESERVES THE SOURCE APPROVAL

AUTHORITY. FOR ACQUISITION PURPOSES, THE VENDOR

SHOULD BE QUOTING THE ITEM "IN ACCORDANCE WITH"

THE SALIENT CHARACTERISTICS OF THE VID.

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER C0201

THIS ITEM MUST BE MANUFACTURED IN ACCORDANCE

WITH THE LIMITED RIGHTS DATA LISTED. THE

GOVERNMENT CANNOT PROVIDE THE DATA. ONLY THOSE

VENDORS WHO HAVE ACCESS TO THE DATA SHOULD

QUOTE.

REFERENCE NUMBER ES120

NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED

DRAWING AND AS OF THE DATE OF THIS SOLICITATION

ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE

BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED

PART NUMBERS ARE PROVIDED, THE ITEMS

FURNISHED MUST MEET THE REQUIREMENTS OF THE

CITED DRAWING. OFFERORS WHO ARE INTERESTED

IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF

FUTURE ACQUISITION MUST CONTACT THE

COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE

SOURCE CONTROLLED DRAWING.

ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES

THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT

THIS TIME.

REFERENCE NUMBER E0117

THE PROCUREMENT AGENCY HAS DATA ADEQUATE FOR

EVALUATION PURPOSES, BUT LIMITED RIGHTS APPLY.

THE OFFEROR NEEDS TO PROVIDE ONLY ITS DATA FOR

EVALUATION.

REFERENCE NUMBER ESC01

SOURCE CONTROL

REFERENCE NUMBER J5930

PRESERVATION AND PACKAGING SHALL BE IAW THE

LATEST REVISION OF MILITARY SPECIFICATION:

MIL-DTL-28786, FOR SWITCHES.