PID PACK DATA.pdf
PDF 41 KB Posted
- Attached to
- 5306-011790901, BOLT, SHEAR
- Solicitation number
- SPE4A226R0013
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Defense Logistics Agency (DLA) procurement specification document for shear bolts. The document establishes technical and quality requirements for the supply item, incorporating by reference the DLA Master List of Technical and Quality Requirements available on the DLA website. For simplified acquisitions, the revision of the master in effect on the solicitation issue date or award date controls, while for large acquisitions, the revision in effect on the RFP issue date applies unless a solicitation amendment specifies otherwise.
Quality assurance and sampling shall comply with MIL-STD-1916 or ASQ H1331, Table 1, or a comparable zero-based sampling plan unless otherwise specified by contract. Critical, major, and minor attributes shall be assigned verification levels of VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. The document identifies six Critical Application Item products from approved manufacturers: ACUFAST Aircraft Products (P/N HS4924-14D48), Sonic Industries, Inc. (P/N SII1265-14D48), Space-Lok, Inc. (P/N SLB289-14D48), and two part numbers from SPS Technologies, LLC, plus Valley-Todeco, Inc. (P/N VCC0109-14D48). Packaging shall comply with MIL-STD-2073-1E specifications, including board unit containers with intermediate containers (E5) and marking per MIL-STD-129 with no special marking required. Palletization must follow RP001 DLA Packaging Requirements for Procurement. The specification also requires removal of government identification from non-accepted supplies and physical identification/bare item marking per DLA requirements.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
BOLT, SHEAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/OƯers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
ACUFAST AIRCRAFT PRODUCTS 4GP55 P/N HS4924-14D48
SONIC INDUSTRIES, INC. 57928 P/N SII1265-14D48
SPACE-LOK, INC. 16258 P/N SLB289-14D48
SPS TECHNOLOGIES, LLC 56878 P/N 73244D14-48
SPS TECHNOLOGIES, LLC 06725 P/N AIC8527-14D48
VALLEY-TODECO, INC. 06710 P/N VCC0109-14D48
PKGING DATA - MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:BD OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
File details come from the government source that posted it. Updated .