PID-PACK 20240819 102004.TXT

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:009223787

WEBBING ASSEMBLY, BARRIER AIRCRAFT ARREST.

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS187

INCLUDE CQ042 OBJECT TEXT ID ST ,,

REFERENCE NUMBER:CQAID

REFERENCE NUMBER:E0114

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:ZD025

___________________EXCEPTION DATA__________________ DRAWING 200415485 -

ONLY NOTES 1,3 AND 12 APPLY CONTRACTOR MAY USE SPRAYLAT TR-5418-3 RESIN

PER MIL-DTL-81736 AS A SUITABLE SUBSTITUTE FOR RESIN PER MIL-W-38461 AS

SPECIFIED ON DRAWING 6C37215. _______________END OF EXCEPTION

DATA_______________ GOVERNMENT FAT APPLIES. PER FAR 52.209-4: (A) THE

CONTRACTOR SHALL DELIVER 1 UNIT WITHIN 180 CALENDAR DAYS (NOTE: THE

DELIVERY SCHEDULE ON THE FACE OF THE SOLICITATION REFLECTS ONLY THE TIME

TO DELIVER THE SUPPLIES, NOT THE FIRST ARTICLE) FROM THE DATE OF THIS

CONTRACT TO: FD 2060 DLA CENTRAL RECIEVING DDWG ER 455 BRYON ST WR-ALC

ROBINS AFB, GA 31098 (B) WITHIN 60 CALENDAR DAYS AFTER THE GOVERNMENT

RECEIVES THE FIRST ARTICLE, THE CONTRACTING OFFICER SHALL NOTIFY THE

CONTRACTOR IN WRITING OF ACCEPTANCE/REJECTION OF FIRST ARTICLE.

DISPOSITION OF FIRST ARTICLES: SEE FAR 5209-4(e), MAY DELIVER THE

APPROVED FIRST ARTICLE AS PART OF THE CONTRACT QUANTITY. DLAD

52.209-9016, GOVERNMENT TESTING COST $2000.00. AFTER RECEIPT OF QUOTES,

OFFERORS MAY BE CONTACTED TO PRICE THE FAT REQUIREMENT. ,,

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 98750 68C37215

REVISION NR D DTD 01/19/1971

PART PIECE NUMBER: 68C37215-13

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR E DTD 01/30/2020

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

REFERENCE NUMBER:ZD079 OBJECT TEXT ID ST

REFERENCE NUMBER:CP068 OBJECT TEXT ID ST

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER CQAID

WHEN FIRST ARTICLE IS REQUIRED IN THE

CONTRACT, THE CONTRACTOR SHALL MARK THE OUTER

SHIPPING CONTAINER IN 2 INCH BOLD, RED LETTERS

"FIRST ARTICLE". THE CONTRACTOR SHALL ALSO

PROVIDE THE TESTING FACILITY WRITTEN

NOTIFICATION OF WHEN THE FIRST ARTICLES

EXHIBITS WILL BE SHIPPED TWO WEEKS BEFORE THE

SHIP DATE.

REFERENCE NUMBER E0114

THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE

(ODS) IN THE DESIGN, MANUFACTURING, TESTING,

CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM

UNDER ANY MILITARY OR FEDERAL SPECIFICATION,

STANDARD OR DRAWING REFERENCED IN THIS ITEM

DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE

WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS

OBTAINED. THIS PROHIBITION SUPERSEDES ALL

SPECIFICATION REQUIREMENTS BUT DOES NOT

ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.

THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS

DEFINED IN "FAR 11.001" OR TO PART-NUMBERED-

ONLY ITEMS.

REFERENCE NUMBER RQ001

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER ZD079

ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.

REFERENCE NUMBER CP068

"PRESERVATION, PACKAGING, PACKING, AND MARKING

SHALL BE IN ACCORDANCE WITH MIL-W-38461,LATEST

REVISION. NO SEALED BARRIER BAG SHALL BE USED

ON THIS ITEM. SPOOL SHALL COMPLY WITH NON

MANUFACTURED WOOD PACKING MATERIAL (NMWPM)

REQUIREMENTS REGARDLESS OF DESTINATION TO

ENSURE NO REPACKING IS NECESSARY FOR EUROPEAN

SHIPMENTS FROM DEPOTS. MORE INFORMATION ON

NMWPM IS AVAILABLE ON PALLETIZATION SHEET

DC1636P0001, LATEST REVISION IS LOCATED AT

WWW.DSCC.DLA.MIL/OFFICES/PACKAGING/NMWPMNOTICE.

HTML.